Used Valtra/Valmet 700 for sale (12,949)

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning diameter over cross slide: 755 mm, turning length: 750 mm, turning diameter: 365 mm, spindle speed (max.): 4,000 rpm, rotational speed (max.): 6,000 rpm, Mori Seiki NL 2500 SMC/700 with sub-spindle TECHNICAL DETAILS Control: MSX-850III Main spindle size: A2-8 Counter spindle size: A2-6 Main spindle bore: 80 mm Main spindle speed: 4,000 rpm Integrated main spindle motor: 18.5 kW Integrated motor for counter spindle head: 11 kW C-axis: main and counter spindle Motor starting torque: 640 N/m Turning diameter: 755 mm Machinable diameter: 365 mm Machinable length: 750 mm Speed of powered tools: 6,000 rpm Direct drive motor for powered tools: 5.5 kW Indexing time for turret change: 0.2 s Turret slots: 12 stations, all powered Rapid traverse speed: 30 m/min (X and Z axes) MACHINE DETAILS Weight: 6,500 kg Hpedpfx Afewqc T Uopsa Short bar loader: LNS Quick Load Servo II Measurement: Two arms for automatic measurement of Renishaw tools Interfaces: via USB, PCMCIA card, and RS 232 EQUIPMENT - C-axis on both spindles - Hainbuch clamping system BZI 65 - Three-jaw chuck Schunk 165 mm - Oil cooler for both Daikin spindles - Interface for bar feeder - Automatic parts gripper - Foot pedal for independent opening and closing of main and counter spindle chucks - Knoll filtration system with high-pressure pump - Transformer - Documentation

Condition: good (used), Year of construction: 2004, ENGEL DUO 4550/700 – Technical Specification General Information: Machine designation: DUO 4550/700 Controll : CC100 Clamping Unit: Clamping force: 7000 kN Opening force (with pressure pads): 510 kN Opening stroke: 1350 mm Minimum mould height: 450 mm Maximum mould height: 1350 mm Daylight (platens open): 2700 mm Platen dimensions (H × V): 1460 × 1360 mm Tie bar distance (H × V): 1030 × 930 mm Max. mould weight: 9000 kg Ejector stroke: 300 mm Ejector force: 90 kN Ejector strokes (Euromap 6): 8 Dry cycle time (Euromap 6): 7.0 seconds Injection Unit: Screw diameter: 90 mm L/D ratio (barrier): 24 Plasticizing rate: 2488 cm³/s Shot volume: 2860 cm³ Shot weight (theoretical): 2600 g Injection flow rate: 533 cm³/s Injection pressure: 1910 bar Specific injection pressure: 2100 bar Nozzle length: 185 mm Nozzle contact force: 65 kN Heater capacity (zone 7): 62 kW Pump drive power: 75 kW Oil capacity: 1000 liters Hpjdpfx Aov U Dn Nsfpea Weight: Net weight of clamping unit: 22 tons Net weight of injection unit: 10 tons Cores: 2+2 Linear Robot Engel ERC

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Norden 700 Plastic Tube Filler Provides outputs of up to 70 tubes per minute and is designed and manufactured to produce the highest possible packaging quality standards at maximum operational efficiencies. Plastic and laminate tubes may be sealed using the Norden´s patented Hot-Air Sealing system. Hpodpfov Hxu Uex Afpoa Year: 2006 Model:700 Key information: – Production capacity: 70 tpm – Filling volume: 1-300 ml – Tube length: 50-250 mm – Tube diameter: 10-60 mm – Infeed system: cassette – Blow off filling nozzle - Fully working condition

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 7024NL256160890J, spindle speed (max.): 10,000 rpm, travel distance Y-axis: 200 mm, rotational speed (max.): 4,000 rpm, bar diameter (max.): 80 mm, distance between centers: 700 mm, Condition: Ball screw drives in X, Y, and Z axes are new + major maintenance package 6 months ago (not in use since) TECHNICAL DETAILS Centre distance: 700 mm Spindle speed: 1 - 4,000 rpm Power: 18.5 / 18.5 / 15 kW (25% duty cycle / 50% duty cycle / continuous) Bar capacity: Ø 80 mm Turret: 12 stations, bolt-on turret Hpedpfxexamqms Afpea Tool spindle: 10,000 rpm Tool spindle power: 5.5 / 5.3 / 7 kW (3 min / 5 min / continuous) Taper: MT5, live center Centers without center tip Overhang length for driven tools: ±100 mm Control: M730UM, CELOS - ERGOline Touch Assembly units: Integrated MK4 bearing for center Chip and cooling system Scraper belt chip conveyor: with magnetic separation, discharge height approx. 1,000 mm Cooling system: increased pressure 5 bar, pump 800 W, flow rate 20 l/min Coolant shower at chuck, incl. high-performance pump Compressed air discharge system for tool holders Compressed air discharge system for tailstock center In-line filter for cooling system FEATURES - Interface for oil mist separator Ø 150 mm - Tool presetting device not included - Signal light: red, yellow, green, blue - EtherNet/IP interface for automation - Robot interface for DMG Mori Seiki portal robot - Transformer: 45 kVA, three-phase autotransformer - X-axis direction ISO - Machine does not include a chuck

Condition: used, Composed of: 1) Dough storage hopper Mod. 'STAR' 2) Conveyor L=500 Mod. 'TRL' 3) Dough extruder Mod. 'RON 1/480' 4) Conveyor L=700 Mod. 'MCI 690' 5) Dough flouring unit L=700 Mod. 'B/M 700L' 6) Multi-roller unit Mod. 'MUL 700' 7) Conveyor L=700 Mod. 'MCI 690' 8) Fat extruder Mod. 'EG-7-E' 9) Overlapping conveyor belts Mod. 'NPP/200' 10) Conveyor L=700 Mod. 'MCI 690' Year of manufacture 2006 Hpedpfx Aswxwiaefpoa

Condition: used, Imatronic Numerical Control with ImaWop 8.0 Software (software updated in 2020) Working range on X axis mm 7000 Working range on Y axis mm 1400 Full table with support panel for positioning the suction cups Suction cups can be manually positioned on the work surface using a laser indicator No. 2 vertical electrospindles with C axis with automatic tool change Automatic tool changer with 18 positions on the back of the machine Drilling head with 21 spindles arranged as follows: * N° 11 verticals on X axis * N° 10 verticals in Y axis Edgebanding unit with glue pot and pre-melter for EVA glue (glue pot new in 2023) Nordson pre-melter for PUR bonding on Folding panels No. 1 blade aggregate (end cutter) No. 1 trimming aggregate No. 1 cross-shaped aggregate with 4 horizontal drilling lines No. 1 blower aggregate 2-position edge storage unit Front protection and safety system with carpets Full protection cabin (not original IMA) TECHNICAL DETAILS TO BE CHECKED Hpsdpfx Aow El Nhofpea

Condition: excellent (used), Dough divider. Manufacturer - Friul Co srl. Type - M44/700. Portion weight - 300-650gram. Capacity - 70-400kg/h. Container capacity - 44liter. 230V, 50hz, 1300W, 6.5AMP. Dough rounder. Manufacturer - Friul. Type - R10. 230V, 50hz, 370W, 2.4AMP. Elevator included. Hedsv Szubopfx Afpspa CLH.24

Condition: like new (used), Year of construction: 2021, General parameters: Hpodpfx Ajv D Rhujfpoa Machine type: Edge banding machine Model: Novimat Compact R3/L12 Year of manufacture: 2021 Manufacturer: IMA Schelling Group Total machine length: 7 m Intended use: Industrial edge processing with high precision Key features: Automation of basic functions for easy operation by one person Massive frame construction for high stability Electronically adjustable upper pressure path Two-band pressure belt for safe guidance of short parts IMA quick glue change system Program-controlled feed speed Multi-profile technology possible with automatic profile change Touch control via 21.5" industrial PC Technical parameters: Part thickness: 8–60 mm Minimum part length: 150 mm Minimum part width: 65 mm Maximum edge band height: 65 mm Edge types: Paper, plastic, veneer (with optional protective coating) Strip thickness: 0.3–3 mm Working speed: 20 m/min Machine equipment: Pre-milling unit with diamond tools Cutting unit with automatic tilting (15° inclination) Milling and copying units with automatic adjustment Edging system with PUR glue option Upper and lower spray system for cleaning and maintenance of the part Rounding and polishing units for final edge treatment ICOS open control system with touch screen

Condition: excellent (used), Year of construction: 2011, operating hours: 17,813 h, functionality: fully functional, turning length: 700 mm, turning diameter over cross slide: 750 mm, turning diameter: 366 mm, spindle motor power: 26 W, spindle speed (max.): 4,000 rpm, spindle bore: 80 mm, mount diameter: 12 mm, rotational speed (max.): 6,000 rpm, Make Mori-Seiki Moderl NL 2500SY/700 Year of manufacture 2011 Control system MXS 850 IV Data: Max Swing over bed 755 mm Hpedpfx Ajwtfwhsfpsa Max swing over support 740 mm Max Turning diam. 366 mm Turning length 785 mm Movements X 260 mm Y 100 +-50 mm Z 795 mm Rapid transport X/Y/Z 30/20/50 m/min Spindle power 26/22 kW Spindle speed 4,000 rpm Bar Capacity 80 mm Chuck diameter 250 mm Spindle nose JIS A2-8 Spindle indexing 0.001° Sub Spindle power 11/7,5 kW Sub Spindle speed 6,000 rpm Sub Bar cap. 80 mm Sub spindle Chuck diameter 150 mm Sub Spindle nose JIS A2-5 Sub Spindle indexing 0.001° Number of tools in turret/driven 12/12 pcs. Power driven tools 5.5 kW Spindle speed driven tools 6,000 rpm Machine weight 6,200 kg Machine dimensions LxWxH 4.34 x 2.00 x 2.120 m Equipment: Chip conveyor, 3-jaw chuck Kitagawa BB-210 in main Spindle and a Kitagawa B 206 in Sub Spindle, Part catcher, Various tool holders, Parts catcher, Interface for Bar-Feed, Synchronised threading, The machine has 17800 work hours.

Condition: good (used), Year of construction: 2012, machine/vehicle number: TTPP-3-2012, cutting height (max.): 260 mm, cutting width (max.): 200 mm, cutting length (max.): 10,000 mm, power: 15 kW (20.39 HP), saw blade diameter: 700 mm, total length: 18,000 mm, WALTER TTPP log saw with double circular blade saws wood up to 950mm in diameter and 10 meters in length 700mm vertical blade and 550mm horizontal blade - 15 kw motors per blade maximum sawing capacity: vertically 260mm and horizontally 200mm hydraulic clamping + taper adjustment rollers Two-cut sawing (in 2 directions) Electronic blade positioning ANTD-03 Selbit Hsdpfeq H Hwwex Afpjpa carbide-tipped blades - 18 teeth

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 16445, Bandsaw for wood Hjdpfx Afot Tbu Tjpopa Manufacturer: Meber Srl, Viale Artigianato,1; 41012 Carpi (MO) ITALY Type: HB/700 Machine number: 16445 Power connection: 380V, 4 kW, 8.5 A Pulleys with new rubber coating

Condition: as good as new (ex-display), Year of construction: 2022, MK Belt conveyor Förderband 9109-800-780 RA2353 Manufacturer: MK Hedpsvyazcofx Afpspa Type: GUF-P 2041 AF/9109/700 Year of manufacture: 2022 Condition: as good as new Motor: fully functional conveyor length (FL): 9109 mm nominal / external width (NB): 800 mm belt width (GB): 780 mm overall height (BH): 100 mm motor height (MH): 450 mm Motor type: SEW gear motor Motor power: kW 1,5 380V Conveyor speed: Frequency converter for stepless speed control Drive: head drive Optional: supports Side guides Price plus VAT central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: excellent (used), Year of construction: 2009, operating hours: 61,000 h, functionality: fully functional, clamping force: 2,200 kN, screw diameter: 45 mm, clearance between the columns: 560,510 mm, column diameter: 90 mm, injection pressure: 2,106 bar, injection weight: 325 g, mold height (min.): 200 mm, ejector force: 42 N, ejector stroke: 190 mm, overall weight: 9,000 kg, Press currently in production. Excellent for packaging. With inverter. Hpodpfoww En Iox Afpja

Condition: new, Type 700 Motor power 4 kW, 1450 aps/min Blade length 5020 mm Blade width 19-50 mm Blade speed 18 m/s Throat / max. cutting width 700 mm Hsdpfjd Av Dmox Afpopa Max cutting height 430 mm Table dimentions 790 x 500 mm Tilting table 0°- 45° Dust port diameter 2 x 100mm

Condition: ready for operation (used), Year of construction: 1977, functionality: fully functional, Langzauner LZG 1000/700/1400 long belt sander large projection 1000 mm table dimensions 2500 mm belt dimensions 6800 x 150 mm right left run 2 belt speeds 11 and 22 m/sec vacuum clamping device lighting year of manufacture 1977 Hpjdpfx Aor Axf Tefpsa tested for functionality dimensions 3700 x 1200 x 1500 mm weight 950 kg price 2500.-

Condition: as good as new (ex-display), Year of construction: 2022, MK Belt conveyor Förderband 8946-800-780 RA2355 Manufacturer: MK Type: GUF-P 2041 AF/8946/700 Year of manufacture: 2022 Condition: as good as new Motor: fully functional conveyor length (FL): 8946 mm nominal / external width (NB): 800 mm belt width (GB): 780 mm overall height (BH): 100 mm motor height (MH): 450 mm Motor type: SEW gear motor Motor power: kW 1,5 380V Conveyor speed: Frequency converter for stepless speed control Drive: head drive Optional: supports Side guides Price plus VAT central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply get in touch with us. Hpjdpfjvyazpsx Afpoa Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: as good as new (ex-display), Year of construction: 2022, MK Belt conveyor Förderband 6699-700-690 RA2352 Manufacturer: MK Type: GUF-P 2041 AF/6699/700 Year of manufacture: 2022 Condition: as good as new Motor: fully functional conveyor length (FL): 6699 mm nominal / external width (NB): 700 mm belt width (GB): 690 mm overall height (BH): 100 mm motor height (MH): 450 mm Motor type: SEW gear motor Motor power: kW 1,5 380V Conveyor speed: Frequency converter for stepless speed control Drive: head drive Optional: supports Hsdpfsvyay Sox Afpopa Side guides Price plus VAT central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: as good as new (ex-display), Year of construction: 2022, MK Belt conveyor Förderband 11313-700-690 RA2354 Manufacturer: MK Type: GUF-P 2041 AF/11313/700 Year of manufacture: 2022 Condition: as good as new Motor: fully functional conveyor length (FL): 11313 mm nominal / external width (NB): 700 mm belt width (GB): 690 mm overall height (BH): 100 mm motor height (MH): 450 mm Motor type: SEW gear motor Motor power: kW 1,5 380V Conveyor speed: Frequency converter for stepless speed control Drive: head drive Optional: supports Side guides Price plus VAT central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. Hsdpfx Ajvyazijfpjpa We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, machine/vehicle number: 007328, X axis working area: 3200 mm Y axis working area: 1850 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 3 axes Number of controlled axes: 3 axes Total number of drilling spindles: 31 Total number of tool changer positions: 10 Hsdpfxsxmgybs Afpepa

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Stamp: for Herrenknecht tunnel boring -Piston diameter: approx. 150 mm -Piston rod: Ø 110 mm -Stroke: 700 mm -Usable: universal -Number: 2 cylinders available Price: per piece -Dimensions: 950 x 300 mm Hpedpfxob A Rcue Afpoa -Weight: 150 kg/piece

Condition: ready for operation (used), Contraves PS 700 DC Power Supply , used, good condition, 100% functional Hpsdpfx Afsi D Umhepja

Condition: used, Year of construction: 2015, Stone cutting saw DTS 700, rated power: 5.5 kW, operating voltage: 11 A / 400 V, weight: 230 kg Hjdpox Ia Rljfx Afpopa

Condition: ready for operation (used), controller manufacturer: Heidenhain TNC 410, empty load weight: 9,000 kg, total length: 2,800 mm, total width: 2,540 mm, total height: 2,500 mm, CME BF-01 X: 1800 - Y: 700 - Z: 600mm Longitudinal travel X-axe: 1800 mm Cross travel Y-axe: 700 mm Travel Z-axe: 600 mm Dimensions clamping space- table: 1800 x 600 mm Power on spindle: 30 hp Hsdjx Hlgcepfx Afpspa Admission in millinghead (ISO): ISO 50 Max speedrange: 3000 rpm Power needed (KVA): 11 kW

Condition: used, machine/vehicle number: 007329, X axis working area: 3200 mm Y axis working area: 1850 mm Hedpfexn Nfvsx Afpopa Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 3 axes Number of controlled axes: 3 axes Total number of drilling spindles: 31 Total number of tool changer positions: 10

Condition: good (used), Plastic chain conveyor, conveyor belt, belt conveyor, transport belt, belt conveyor, chain conveyor -Drive geared motor: 0.37 kW -Belt width: 700 mm -Length: 1000 mm Hedpfx Afjb A Rt Aspepa -Speed: 9.1 m/min -Dimensions: 1100/1000/H200 mm -Weight: 136 kg