Used Valtra/Valmet 900 for sale (4,587)

Condition: used, Year of construction: 1997, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Travel ranges X-axis: 710 mm Y-axis: 630 mm Z-axis: 500 mm Spindle and tool holder Spindle speed: 5–5,000 min⁻¹ Drive power of the working spindle: 11 kW Tool holder: SK 40 Tool changer Gkedpfx Aj Aa Aqtegljd Tool changer: 44 tools Feed rate Feed rate: 10 m/min Work table Clamping area: 1,200 × 600 mm Table load: 0.5 t Control system Control system: Heidenhain TNC 426 Performance data Total power requirement: 15 kVA Machine weight: approx. 4.24 t Machine design Guideways: Flat guideways on all axes Guideway protection: Scrapers and steel covers EQUIPMENT Tool changer with 44 tools Heidenhain TNC 426 control system Wired Heidenhain handwheel Flat guideways on all axes Scrapers on the guideways Steel covers for guideway protection

Condition: excellent (used), Year of construction: 2019, For sale are the following functional and well-maintained oil burners: Gsdpfoy Uvhtex Agljkd 1. Burner type: WM-L10/3-A, MULTIFLAM Output: 200 - 900 kW 17-75 kg/h Design: T-3LN Year of manufacture: 2019 2. For sale is a functional and well-maintained oil burner from Weishaupt, model WM-GL10. It was only used with oil, therefore it does not have a gas line. Burner type: WM-L10/3-A Output: 110 - 1000 kW 15 - 84 kg/h Design: ZM-T Year of manufacture: 2007 3. For sale is a functional and well-maintained oil burner from Weishaupt, model RL3-A. Burner type: RL3-A Output: 120 - 775 kW 10 - 65 kg/h Design: ZMD Year of manufacture: 2002

Condition: good (used), functionality: fully functional, Valmet Sunds pulp dewatering press / bleaching press Gksdpfxez Hc A Ae Aglod * Roll diameter: 900 mm * Roll length: 2820 mm * Roll speed: 2 - 15 revolutions/min * Roll gap: 3 - 13 mm

Condition: excellent (used), Year of construction: 2011, Weishaupt gas burner, with Dungs gas piping DN 50 Gjdpfx Aozdku Rsglokd Burner type: WM-G10/3-A Design: ZM-LN Year of manufacture: 2011 Output: 125-900 kW

Condition: good (used), functionality: fully functional, Description: Suitable for single or two-stage refining. For motors up to 10 mW. Currently the refiner is connected to an ABB 10kV 8mW motor which is available separately. Gkjdpo Ai A Dqofx Agljd

Condition: good (used), functionality: fully functional, Characteristics: * Freeness 104 – 141 ml.CSF * Density: 346 – 320 kg/m3 * Shives: 0.18 – 0.34 % * Tensile index: 43.5 – 39.5 Nm/g Gjdpfxe Ai Az Ie Aglskd * Shear index: 9.3 – 10.4 mN.m2/g Description: Suitable for single or two-stage refining. For motors up to 10 mW. Currently the refiner is connected to a Siemens 10kV 8mW motor which is available separately. Refiner refurbished in 2022 by Andritz ~ € 100,000

Condition: good (used), Year of construction: 2019, functionality: fully functional, Valmet RoboCoiler for automatic de-wiring of bales. There are 2 units. Each unit consist of a turntable, metal detection, cutting and spooling unit. CHARACTERISTICS ▪ Max. 140 balen/hr ▪ Bale length: 700 – 1000mm ▪ Bale width: 580 – 900mm ▪ Bale height: 350 – 650mm ▪ Bale weight: max. 333kg Gsdpfszy Nlaox Aglskd ▪ Wire diameter: 1.8 – 3.0mm ▪ Strength: 500 – 1250 N/mm2

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, operating hours: 313 h, power: 114 kW (155.00 HP), fuel type: diesel, maximum speed: 50 km/h, first registration: 01/2024, next inspection (TÜV): 07/2029, color: green, overall weight: 6,500 kg, front tire size: 540/65R28, rear tire size: 650/65R38, motor manufacturer: AGCO Power, gearing type: mechanical, Equipment: additional headlights, air conditioning, cabin, front power take-off, hydraulics, lighting, trailer coupling, Valtra N155 Forestry – Top-spec – 50 km/h – Front PTO – Olive Green Metallic For sale is a very well-maintained Valtra N155 forestry tractor in the exclusive olive green metallic paint finish. The tractor impresses with its extensive equipment and is ideally suited for both forestry and agricultural applications. Technical data: Manufacturer: Valtra Model: N155 Forestry First registration: 2024 Power: approx. 114 kW / 155 hp Fuel: Diesel Emission stage: Stage V Transmission: DPS Power Shuttle 30/30 Maximum speed: 50 km/h Total weight: 6,500 kg Next §57a/TÜV inspection: 07/2029 Tires: Front: 540/65 R28 Alliance Forest Rear: 650/65 R38 Alliance Forest Equipment: Cab with automatic climate control and footwell heater Front hydraulics and front PTO Rear linkage HD 4 hydraulic rear control valves Power Beyond 2 hydraulic front control valves Gksdjzi Erbepfx Agled Automatic trailer hitch (38 mm pin) Premium work lights 2 yellow rotating beacons Forestry equipment Roof-mounted work light and extensive lighting system The tractor is in very good condition and is ready for immediate use. Viewings are possible at any time by appointment.

Condition: used, A complete paper production line with a shoe press is offered for the production of kraft top liner, testliner and fluting. Working width, trimmed: 2500mm. Stated production capacity: 300t/day. Speed: 650-700m/min, differing figures in the documentation. Basis weight: 115-240g/m², according to the summary document 90-240g/m². Dry content after the press: 50%. DC sectional drive. Equipment: approach flow system, two stainless steel headboxes with two Fourdrinier wires, two compact presses, shoe press, 29 pre-dryer cylinders, size press, 14 after-dryer cylinders, closed hood, Voith Pope reel, Jagenberg Vari Flex S slitter rewinder, vacuum pumps, starch preparation and broke pulper. Modernizations through 2023 are documented. Technical documentation and spare parts lists are available. An inspection is possible by arrangement. Gksdpj Ahy S Djfx Agled

Condition: excellent (used), CATALOGUE NUMBER 6582 TECHNICAL DATA - max. width of the workpiece: 920 mm - max. height of the workpiece: 150 mm 2 units: 1) grooved rubber roller for calibrating, 11 kW 2) grooved rubber roller for calibrating + tape blowing, 7.5 kW Top: - 2 slip rubber rollers - unit - 2 slip rubber rollers - unit - 2 slip rubber rollers Bottom: - 3 slip rubber rollers - conveyor belt - pneumatic belt oscillation - electric table lifting - stepless feed speed adjustment - working pressure 8-10 bar - pneumatic brake - diameter of the dust extraction nozzle: 2 x 160 mm - overall dimensions (L/W/H): 1600 x 1460 x 2000 mm - weight: approx. 1305 kg - Made in Germany - 2 units - Used grinder, very good condition Net price: 24,900 PLN Net price: 5,791 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR Gsdezw Dchopfx Agljkd (Prices may be subject to change in the event of significant exchange rate fluctuations)

Condition: like new (used), Year of construction: 2010, operating hours: 487 h, functionality: fully functional, overall weight: 1,100 kg, volume flow: 358 m³/h, power: 125 kW (169.95 HP), type of cooling: water, rotational speed (max.): 1,500 rpm, Diesel water pump set, Sprinkler unit with few operating hours, in excellent condition for sale. 358m3/h Manufacturer: SISU Gksdpfsyi H Eqjx Aglod Type: 420DSJPL Year of manufacture: 1996/ 2010 new turbo freshly serviced Power: 120 kW, 2940 rpm Pump: KSB ETANORM MX125-250 year: 2010 Capacity: 358 m3/h delivery height: 86 meters Power: approx. 180 HP Weight: 1200 kg self-starting water cooling built on a mobile chassis Operating hours: approx. 473 hours If you need more information, we will help you! Please contact us using the form or call us by phone. Your ad has been automatically translated. Translation errors may occur.

Condition: good (used), For sale: CRATHERN, PERONDI IA630, with a capacity of 900. Gksdpfsz Sat Ejx Aglod

Condition: excellent (used), Catalog number: 7649 TECHNICAL DATA inlet width: 900mm inlet height: 300mm shaft width: 1030mm shaft diameter: 700mm blade length: 1030mm number of blades: 3 pcs screen dimensions: 70x70mm from below, 2 toothed pulling shafts lower shaft motor: 7.5kW from above, 2 toothed pulling shafts upper shaft motor: 7.5kW belt conveyor apron feeder with chain belt 5600mm + 10600mm, 2.2kW feeder belt width: 800mm main motor: 90kW reverse gear overall machine dimensions (L/W/H): 3300x3100x1700mm shredder base dimensions: 3300x2080x1940mm feeder/apron feeder base dimensions (L/W/H): 5600x900x1000mm + 10600x1050x1600mm feeder belt base dimensions: 5100x1300x2520mm Gkodpfj Af Uxmex Aglsd total weight approximately: 16000kg ADVANTAGES – German production – chain-type apron feeder, equipped with scrapers – reverse gear – DTR documentation – used shredder, very good condition Net price: 209900 PLN Net price: 48800 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary with higher fluctuations)

Condition: used, Year of construction: 2015, operating hours: 4,108 h, power: 151 kW (205.30 HP), Equipment: air conditioning, all wheel drive, cabin,

Condition: used, Year of construction: 2015, front tire size: 650/60R34, Equipment: compressed air brake, Rear wheel weights Lower links Cat 3/3 Quick Steer Valtra Evolution / seat 2x sockets 12 V Tires 4x NEW front Mitas 650/60 R34 / Gkedpfxsr N Apfs Agljd

Condition: excellent (used), Year of construction: 2011, conveying length: 37,000 mm, power: 11 kW (14.96 HP), Pipe belt conveyor – RGFO 1200/900 x 37,000 mm Gksds Ai Sr Depfx Aglsd Manufacturer: Rudnick & Enners Features: Pipe belt conveyor, length 37 m Design with foldable upper section Manual tensioning station Drive power approx. 11 kW With scraper Including 2 level sensors Hopper and transfer hopper, year of manufacture 2011

Condition: good (used), functionality: fully functional, Paper production line consisting of stock preparation, paper machine, inline coaters, calander, reeler, offline calander, slitter winders and reel packer. Fully upgraded by Valmet in 2019, including formmaster, topformer, shoepress, pre-dryer section, inline coating, multinip calender and reeler. Characteristics: Capacity: max ~ 350000 T/pa Width: 7500 mm Grammage: 35 – 170 gr/m2 Speed: max 1400 m/min Godpjvptbuefx Agljkd

Condition: used, functionality: fully functional, Year of construction: 1992, operating hours: 16,201 h, load capacity: 25,000 kg, lifting height: 6,050 mm, fuel type: diesel, mast type: triplex, construction height: 3,900 mm, motor manufacturer: volvo, fork length: 2,390 mm, fork width: 250 mm, Equipment: cabin, lighting, pallet forks, Brand: Valmet Type: TD031 Drive-through height: 390 cm Lifting height: 605 cm Capacity: 25,000 kg Drive: Diesel Year of manufacture: 1992 Operating hours: 16,201 3+4+5 valve (side-shift, hydraulic fork adjustment, hydraulic leveling) Triplex mast Pneumatic tires (front twin tires) Fork length: 239 cm Fork width: 25 cm Forks together, outside: 85 cm Gsdpfxewuqpfj Aglekd Forks apart, outside: 288 cm 6-cylinder Volvo engine Enclosed cabin

Condition: good (used), Year of construction: 2016, operating hours: 715 h, functionality: fully functional, machine/vehicle number: 2530-01, working width: 900 mm, Due to machine rejuvenation, we would like to sell our barely used Timesavers wet deburring machine. The machine is available for inspection and testing; it is live. Gksdpov Tnfijfx Agljd Please contact us with any questions.

Condition: ready for operation (used), Dry sorting line (17 pockets) Manufacturer - SATEKO (Valmet) modified - 1996 (7pcs) & 2023 (3pcs) Total number of pockets - 17 pcs Separate rake conveyor on top. Drop from above Latest update 3 pockets in 2023 (Biocone) Main layout attached Gkedpfxjxmr Rre Agljd

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, 1,0 ST. Gebr. Zwei Komponenten Spritzgiessmaschine das zweite Aggegeat ist seitlich angebau Hersteller: NETSTAL Typ: SYNERGY 1750-900-230 Gksdpfxsz Nmi Hs Aglod Baujahr: 2016 Schließkraft: 175 Tonnen Holmabstand: 510 x 510 mm Schneckendurchmesser 1: 50 mm Spritzteilgewicht 1: 377 g/PS Schneckendurchmesser 2: 25 mm Spritzteilgewicht 2: 47 g/PS Ausstattung: Kernzüge 2 x DS / 1 x AS Zweites Aggregat ist seitlich angebaut Roboter Wittmann, Baujahr: 2016

Condition: repair required (used), functionality: not functional, machine/vehicle number: 125-00100(L0449), Year of construction: 2015, operating hours: 12,259 h, input voltage: 230 V, input frequency: 50 Hz, laser power: 5,000 W, electrical fuse: 21 A, feed length X-axis: 914 mm, feed length Y-axis: 609 mm, feed length Z-axis: 914 mm, We are offering for sale an industrial Stratasys Fortus 900mc (900mc V0-A-Classic) 3D printer, manufactured in 2015. The machine is sold as is, and requires some work to be put back into service. Technical specifications: Manufacturer: Stratasys Model: Fortus 900mc (900mc V0-A-Classic) Year of manufacture: 2015 Print head: P5-1 Technology: 3D printing by fused deposition modeling (FDM) Gksdpfx Age Ahp A Holed Condition: Requires repair Compatible thermoplastic materials: ABS-M30 ULTEM 1010 ULTEM 1010 CG ULTEM 9085 ULTEM BLACK ULTEM 9085 CG To enable the machine to be put back into service, the following work is required: Replacement of the fan. Replacement of the loading bay. The estimated cost of the repairs is approximately €10,000. Additional information: This machine represents an opportunity for an industrial company or a 3D printing specialist wishing to acquire a Stratasys Fortus 900mc that needs to be refurbished. For any questions, requests for additional information, or to arrange a visit, please do not hesitate to contact us by message or by phone.

Condition: ready for operation (used), Year of construction: 2019, machine/vehicle number: 1572, functionality: fully functional, operating hours: 5,500 h, power: 55 kW (74.78 HP), cutting height (max.): 1,000 mm, cutting width (max.): 1,200 mm, control type: PLC-controlled, overall weight: 20,000 kg, High-quality and complete Mebor wood processing line in excellent condition. Can be seen in operation in Gemert, the Netherlands. Included are: - Horizontal band saw HTZ 1200 Plus /year of manufacture 2019/, equipped with heavy-duty hydraulics for automatic log processing, maximum cutting length 9m, Optifast 10 control system - Multi-blade saw VR 900 /year of manufacture 2020/ with 3 movable heads - Log loader MLD Logdeck - 2x RCM 800 with left/right sorting - 2x CCP conveyor chains Excellent synchronization with the main band saw for maximum efficiency. The complete line has been professionally maintained and is ready for immediate use. Serious buyers are welcome to visit and see a demonstration on-site /in operation/. Gedpfx Aoz Eadbegljkd Please include your company details /including VAT number/ if you are interested.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 41580-8, Equipment: documentation/manual, MACHINE ORIGINALLY USED IN THE AEROSPACE INDUSTRY, COMPLETE WITH NUMEROUS ACCESSORIES, IN EXCELLENT CONDITION. Gsdpfxe Aiflro Aglekd

Condition: used, Year of construction: 1996, functionality: fully functional, Max. roll diameter: 1,300 mm Roll core: 76 / 100 / 152 mm (unwinding), only 152 mm (rewinding) 2 rotogravure stations + inline adhesive coating unit Gkjdpfx Asz It D Hegled Drying: diathermic oil system, vertical + horizontal tunnels Cooling rollers after each station Control: Siemens S5, DC drives Processes: barrier coating, lamination (paper + aluminum/plastic), inline primer CE certified, incl. thermal oxidizer (RTO25) and steam generator (Ferroli)