Used Valtra/Valmet 700 for sale (5,855)

Condition: used, Year of construction: 2023, Equipment: front power take-off,

Condition: used, Year of construction: 2021, Antenna for steering system submeter activation 20cm accuracy suitable for / Valtra models of level 4 N134 - T254 / Dcedpfx Astvgpfsifek

Year of construction: 2023, condition: new, Burner VALMET TECHNOLOGIES OY Type: Start-up Burner Model: MOR-250CLN Burner position no.: BU-280 Year: 2023 LFO power: 3 MW LFO flow: 64 – 254 kg/h LFO pressure: 250-550 kPa(g) Gas power: 5 MW Dcedpfx Aisw Iwl Sjfsk Gas flow: 1301 m3 n/h Gas pressure: 30-85 kPa(g) Control cabinet equipped. Fireye 85UVF1A-1QD flame detector.

Year of construction: 2024, condition: new, functionality: fully functional, Important lot of 59 fully equipped NEW automated valves still in crates. Brand: VALMET NELES Dodpfow Am Itox Aifeck

Condition: like new (used), Packaging line for shrink bags The line consists of: Vacuum packaging machine MULTIVAC C 700 Chamber dimensions (LxWxH): 1060x440x200 mm Machine dimensions (LxWxH): 1270x850x1150 mm Seal bar length: 1 x 1060 mm Machine cycle: 15-40 sec. Voltage: 400 V-3-50 Hz Power: 7.0 kW; 22 A HENKELMAN DIPTANK 200 A Automatic platform with conveyor belt Digital temperature control Stainless steel housing Maximum loading capacity: 30 kg Immersion depth: 200 mm Immersion time: 3-5 seconds (adjustable) Cycle time: 22 seconds Dedey Iv Iaepfx Aifeck Compressed air consumption: 50 l/min at 6 bar Automatic water supply control Water drainage Automatic water level control Integrated scale protection Timer for preheating water

Condition: good (used), Year of construction: 2007, DADAUX SLICO 700 Cutlet Slicer • Control panel protected with a cover against water ingress. • Textured loading surface prevents excessive friction of products intended for cutting. • Fully constructed from INOX 1810 • Hinged doors • 1 speed: 160 cuts/min • Adjustable cutting thickness from 0 to 40 mm • Electric feed system • Stepwise feed system • Cutting thickness adjustable during operation • Automatic pusher return • Suitable for high-pressure washing • CE compliant Dcsdpfx Aiexx Tbpsfjk

Condition: used, machine/vehicle number: 14016, Rotor diameter: 530 mm Rotor width: 1000 mm Rotor knives: 4 x 2 Stator knives: 2 Feed opening approx. 700 x 1000 mm Drive motor: 90 kW Djdjyuz Dxepfx Aifsck

Condition: used, Dimter OptiCut 700 automatic optimising cross-cut saw (sliding saw) for cutting very wide timber to size according to defects (marked with fluorescent chalk) and length. Technical data: Dcsdpfx Aiezryvajfek - Cutting height: max. 120 mm - Feed length: max. 5,500 mm - Cutting width: max. 700 mm - Saw blade diameter: max. 700 mm

Condition: used, functionality: fully functional, fuel type: electric, – German-made TECHNICAL SPECIFICATIONS: – four rotors (shafts) – rotor diameter: 280 mm – main motor: 2 x 18.5 kW Dcedpozr Ipnjfx Aifek – feed opening dimensions: 700 x 750 mm – hopper dimensions: 1270 x 1300 mm – additional hopper dimensions: 2000 x 1900 mm, height 760 mm – screen size: φ 30 mm – number of knives: 74 – automatic reversing function – overall dimensions (length/width/height): 220 x 150 x 200 cm – transport dimensions (length/width/height): 310 x 220 x 200 cm – weight: ~2500 kg

Condition: used, Max. punching force: 700 kN Projection: 510 mm Cuts on the flat steel shears 500 x 18 mm Dcodpfx Aoq Iyvveifsk Holes e.g. 30 mm diameter in 20 mm flat iron Quick-change device Very good condition Range of tools included in the price Weight: 3.000 kg

Condition: used, Year of construction: 1994, x-axis 7.300 mm y-axis 3.100 mm z-axis 1.250 mm control Heidenhain surface area B 2500 x L 7000 x H 750 mm no. of flutes 13 Stück flute distance 200 mm groove width 28H8 mm max. workpiece weight 4 t/m² drive capacity - main spindle 40 kW tool taper ISO 50 max. spindle tunring speed 4.000 U/min work spindle adjustment 3600 mm stroke senkrecht 1.250 mm spindle diameter 120 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: Double-column gantry: Gantry traverse speed 0–6,000 mm/min Feed rate 12 m/min - Heidenhain control system with handwheel - Spindle extension (VFL) - Angle milling head (WFKU) - Tool magazine - Auxiliary equipment magazine - Schmipke cooling system - Coolant tank - Chip conveyor - Hydraulic unit - Oil cooler - Operator platform Djdpfozhcinsx Aifsck - Comprehensive documentation available - Note: Operating conditions and installation layout in the appendix Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data/specifications, and prior sale.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, clamping force: 700 kN, Equipment: documentation/manual, Seologica controll Djdpfjygtquox Aifock Clamping force: 70 t Screw diameter: 40 mm (highly resistant) Distance between tie bars V: 370 mm Distance between tie bars H: 370 mm Tie bar distance: 370x370 mm HxV plates: 510x510 mm Mould tickness min-max: 200 Stroke: 400mm Shot volume: 188 cm3 Type: Uni Drive: Hydraulic Air valve: 1 Hours: 23000 2 servo pumps 4 free cooling circuits 6 electric heating zones for mould

Condition: used, Year of construction: 2005, machine/vehicle number: IntNr231574, Machine Specifications Control: MORI SEIKI MSX-850 Design: Slant-bed turning center Version: SY with Y-axis Turret: 12-position with driven tools Working Area Max. turning diameter: 356 mm Standard turning diameter: 275 mm Max. turning length: 705 mm Traverse Travels X-axis: 260 mm Y-axis: ±50 mm / total approx. 100 mm Z-axis: approx. 795 mm Rapid traverse X/Y/Z: 30 m/min Counter spindle LNS Quick Load Servo 2 bar feeder Dcodpfx Aszp Ifwjifok Max. bar length: approx. 1,500–1,600 mm / 63" The machine can be inspected under power by appointment. Specifications and technical details are subject to change and error. Prior sale reserved.

Condition: used, Year of construction: 2012, Technical details: max. temperature: 700° - übliche Temperatur: 400 - 650°C Grad size of opening: B: ca. 2200 x T: ca. 3800 x H: ca.1100 mm program control: Siemens S7/300 IM 151-7 interface: Ethernet container volume: Ofen-Volumen: 9,2 m³ l control voltage: 24 / 230 Volt current type: 1P/PEN; 50 Hz Voltage: 400 V elect. connected power requirement of heater: 3 x 3 x 21 kW = 189 kW flow rate: 3 x ca. 9.000 = 27.000 m³/h weight of the machine ca.: 8,0 t dimensions of the machine approx. HxWxD: ca. 3.9 x 3.8x 4.8 m dimensions electric cabinet: ca. B: 2.400 x T: 400 x H: 2.000 mm transport dimensions LxWxH: ca. 5,2 x 3,6 x 2,9 m Electrically heated circulation oven Electric annealing furnace whose housing is made of profiled sheet steel and lined with lightweight refractory bricks/ firebricks. Application/processes: mainly annealing of low-alloy and high-alloy wood cylinders (e.g. alloyed gray cast iron) Usual operating weight 5000kg max. 8000kg The parts are placed directly crosswise on the bogie hearth/grate in the flow device. (Height above floor approx. 750mm without grate) Heating integrated in oven ceiling Circulation fan (3 compact fans) on oven side wall, 3 x 4.0 kW = 12.0 kW Forced cooling (1 cooling air fan) Dedpfx Aou R Dhxjifeck Program control via 25 programs with 50 program sections per program Oven door/lifting door with SWE gear motor approx. 2.2 kW (frequency-controlled) Bogie hearth drive approx. 3.0 kW SEW geared motor (frequency-controlled) incl. center rail (chain drag) used, good condition *

Condition: as good as new (ex-display), Code: 0468 Brand: FELDER - AUSTRIA Model: K 700 S – CE Standard Precision panel saw with tilting blade and scoring unit - CE Standard Technical data: Tilting guide system “Easy-Glide” “Power-Drive” for automatic adjustment of blade height and tilt Carriage length 3200 mm Blade inclination 90/45° Cutting width 1250 mm Max blade diameter315 mm Bore 30 Rpm 4800 Max cutting height at 90°104 mm Max cutting height at 45° 72,7 mm Adjustable scoring unit - blade diameter 120 mm – Bore 20 rpm 8600 Main blade motor 7,5 Hp Tilting guide on fence 0,45° Support roller on fence Dodpfx Aiozqd Htsfeck Dust extraction connection diameter 120 mm Upper blade dust extraction diameter 50 mm Overall dimensions of assembled machine mm 3400 x 3400 x 1050 h Weight kg 740

Condition: good (used), Year of construction: 2003, functionality: fully functional, Offered is a Clipper Poly Clip PDC 700, year of manufacture 2003. The machine is in good condition, fully functional, and immediately ready for use. Includes thread dispenser and loop former (caliber 28 to 115 mm). Further information upon request. Payment in cash or advance payment. Sale only to commercial customers, no warranty or guarantee. Dedsxh Hprspfx Aifsck

Condition: excellent (used), Year of construction: 2003, WELL-MAINTAINED MACHINE FROM A HOBBY WOODWORKING SHOP Table dimensions: 990 x 750 mm Router spindle diameter: 30 mm Router spindle speed: 3,700 / 6,500 / 7,890 RPM Diameter of router tool, max.: 230 mm Djdpfjznk Ilox Aifsck Router spindle can be tilted: 0 - 45 degrees Router spindle height above table, max.: 120 mm Motor: 5.5 kW Router spindle can be switched for clockwise/counterclockwise rotation Sliding table with additional table support Additional extraction hood as a replacement for the fence, e.g., for sanding Hold-down device / safety system, e.g., when routing narrow parts Weight: approx. 540 kg Dust extraction connections: 1 x 120 mm, 1 x 80 mm Optionally available: 3-roller feed device FELDER F-34, item no. 4754

Condition: used, Universal milling machine table, angle table, setup angle, clamping table, presumed MAHO make T-slot table, add-on table for universal tool milling machine Table no.: 76-400-1 / 2210 05 00 Table size: 700 x 330 mm Overall height: 210 mm T-slot width: 12 mm T-slot pitch: 45 mm - Table plate with 7x T-slots, 12 mm each - Mounting surface 90°, 13 mm diameter holes, 14 mm elongated holes for fastening and 12 mm guide slot - Hole spacing, top mounting plate Ø 13 mm = 500 mm, 50 mm from the table surface (measured at center) - Hole spacing, middle mounting plate Ø 13 mm = 472 mm, 95 mm from the table surface (measured at center) - Elongated hole spacing, middle mounting plate = 475 mm, 140 mm from the table surface (measured at center) - Elongated hole spacing, bottom mounting plate = 475 mm, 185 mm from the table surface (measured at center) Dsdpfx Ajxy Styoifsck Dimensions (L x W x H): 820 x 330 x 210 mm Weight: 61 kg In good condition

Condition: used, NC universal tool milling machine MAHO type MH 700 P with HEIDENHAIN TNC 121 linear control . 71247 Circuit diagram no. ET 226 Built in 1979 Travel paths X: 600 mm, Y: 400 mm, Z: 400 mm Table size 900 x 500 mm Spindle mount ISO 40 Spindle speed 40-2000 rpm, 18 steps Feed rate X, Z-axis 1 - 600 mm/min, continuously variable Feed rate Y 1 - 300 mm/min, continuously variable Rapid traverse X, Z-axis 1.5 m/min Rapid traverse Y-axis 0.75 m/min Vertical spindle travel 80 mm Horizontal spindle travel 80 mm Spindle drive 4 kW Power supply 380 V, 50 Hz, 10 kW - HEIDENHAIN TNC 121 NC linear control - Vertical milling head with automatic Quill feed - Hydro-mechanical tool clamping - Coolant system in the machine base - Universal built-in rotary table, swiveling and tilting via threaded spindles +/- 30° Dsdpfx Aowd Szbsifock - Universal built-in rotary table with manual transverse adjustment of 200 mm - Universal built-in rotary table with 360° rotation function and hydraulic clamping - Rotary table with direct indexing 72 x 5° and indirect indexing via hole plate 1:120 = 1 rev = 3° - Pivoting control panel - Central lubrication system - Electrical diagram Space requirement L x W x H 2000 x 1650 x 2250 mm Weight approx. 2800 kg Good condition

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, For sale is a Felder F 700 table router in high-quality industrial design, including a Felder F38 3-roller feed system. The machine impresses with its robust construction, powerful drive, and precise adjustment options, making it ideal for professional use in carpentry and joinery workshops. Technical data: Manufacturer: Felder Type: F 700 Year of manufacture: 2012 Dcedpfx Aozm Rzijifek Motor power: 7.35 kW Voltage: 400 volts Frequency: 50 Hz 3-phase design Router spindle adjustable by 45° Electronic height adjustment with digital display (mm/inch) Speed levels: 3,500 / 6,500 / 8,000 / 10,000 rpm Made in Austria Equipment: Felder 3-roller feed system F 38 Swivel and height-adjustable feed system Sliding table Table extension Solid aluminum router fence Precise router fence adjustment Large cast iron table Digital display for router height Swivel indicator for the router spindle Emergency stop switch Professional industrial design The machine is in good used condition and shows only the usual signs of wear and tear due to age and use. It is ideally suited for daily professional use. An inspection and test run are possible at any time by appointment. Transportation is possible for an additional charge! The machine will be inspected before sale. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Hombak trunk milling machine ESR 900/700/960 Root inflow reducer - year of manufacture 1993 Djdst Hf T Hopfx Aifsck - log diameter max 1300 mm TECHNICAL PARAMETERS: minimum log length 2000 mm 48 knives main motor 45 kW hydraulic pump motor power 11 kW milling head rotation motor 5.5 kW shaft length (milling / cutting length) 980 mm pressures machine overall dimensions (length / width / height) 550 / 250 / 340 cm weight ~10 t

Condition: used, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 104 mm, cutting width (max.): 1,250 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, – Austrian production – X-Roll sliding carriage guide system – DTR and CE user manuals TECHNICAL SPECIFICATIONS: – Carriage length: 2050 mm – Cutting width (right): 1250 mm – Max. blade diameter: 315 mm – Scoring unit diameter: 100 mm – Main motor: 5.5 kW – Scoring unit motor: 0.75 kW – Brake – X-Roll guide system – Cutting height adjustment – Manual angle adjustment: 0° - 45° – Max. cutting height: 104 mm – Possibility to install cutter: thickness: 6 - 20 mm – Max. diameter: 228 mm – Pawl Dcodpfjym Amlox Aifek – Blade guard – Extraction port diameter: 50 and 120 mm – Dimensions (L/W/H): 220 / 200 / 130 cm – Weight: ~ 550 kg

Condition: good (used), Year of construction: 2010, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, actuation type: electric, table length: 205 mm, Equipment: CE marking, rotational speed infinitely variable, We are selling a professional and immediately ready-to-use workshop set from the Austrian premium manufacturer Felder. The set consists of the precise panel saw K 700 (year of manufacture 2010) and the matching mobile dust extraction unit AF 14. Both machines are in a well-maintained, fully functional condition and have operated flawlessly in a professional workshop environment until recently. Perfect for carpentry shops, interior design, or ambitious woodworkers who are looking for a complete solution. 1. Felder K 700 panel saw: Motor power: 5.5 kW (powerful S6-40% version) Voltage / Frequency: 400 V / 50 Hz (three-phase) Features: Smooth-running aluminum sliding table, large extension table with retractable guide rail and folding stop, solid parallel fence on round bar guide with fine adjustment, workpiece clamping device (eccentric clamp). 2. Felder AF 14 mobile dust extraction unit (included): Model: Felder AF 14 (movable on rollers) Power: Powerful motor with robust steel fan wheel Airflow: Max. 2,350 m³/h for excellent chip extraction Convenience: Practical quick-change system for chip bags Accessories: Includes flexible extraction hose (as shown) for direct connection to the panel saw. The system is completely coordinated – connect it and start working dust-free immediately! The machines can be viewed on-site and tested while powered up after prior arrangement. Dcjdpjzrl A Eefx Aifsk

Condition: good (used), Code: 0459 Brand: SICMA - ITALY Model: F 700 N - CE Standard Dcjdpfszn Agtjx Aifsk Spindle moulder for milling and jointing operations on wood, plastics, composites and various other materials – CE Standard Table dimensions 1000 x 800 mm Rotational speed 3000/4500/6000/8000 rpm Max diameter 250 mm Mechanical spindle height indicator Motor 4,5 Hp Aluminium guides Safety guard N° 2 suction inlets diameter 120 mm Overall dimensions mm 1100 x 800 x 1100 h Weight kg 800

Condition: used, Year of construction: 2019, operating hours: 4,493 h, 2019 | Vögele Super 700-3 I | Used Asphalt Paver | 4493 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Dcodpfx Ajzmatzoifjk 💰 Buy Now for EUR 57000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 56 inspection points 55 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good operating and maintained Vogele paver , all functions operate and oil and filters recently been replaced , machine is ready to work 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41101 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.