Used Valtra/Valmet 700 for sale (5,973)

Condition: good (used), Year of construction: 2005, cycle controlled lathe Machine type: Seiger SLZ 700 x 2000 Control: Heidenhain Year: 2005 Available after: sofort / now SPECIFICATIONS Bed width: 480 mm Max. turning length: 2.000 mm Turningdiameter: 730 mm Umlaufdurchmesser ü. Planschieber / Swing diameter over Face slide: 450 mm Amount of turrets: 1 Tool: Capto C6 mit WTO (Angetriebene WKZ) Axial – Radial ! Equipment Chip conveyor Bedj Afm D Uspfx Acfelp Steady rest: Ø50 - 300mm Steady rest: mitlaufende 3-jaw chuck: Rota S+ 500-162 Keilstangenfutter mm Bohrstangenhalter

Year of construction: 2013, condition: ready for operation (used), Mariani Shrink film wrapper Model: TRM 700-LF-I Bedpeyilyqefx Acfelp YOM 2013 Including in/outfeed conveyor system Working width: 700mm Cardboard Trays – Cases with protective shrinked film Portion packs : 3 x 8 – 3 x 9 – 3 x 10 Family packs : 2 x 6 – 3 x 4 Output: Max 25 trays per min, varying according to the format required Dimensions machine (LxWxH): 5000x1400x2100mm

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, Equipped with DMG MORI M730 UM MAPPS CELOS control system. Bjdpfjzmfxiex Acfjlp Year of manufacture: 10/2017, Commissioned: 1/2018 Turning diameter: 356 mm Travel in X: 260 mm Travel in Z: 795 mm Travel in Y: +- 50 mm Spindle bore: 91 mm Main spindle speed range: 4000 rpm Counter spindle speed range: 4500 rpm Driven tool speed range: 10000 rpm Including the following accessories: Work area door with interior lighting 20-position turret with 20 driven stations C-axis, Y-axis Touch probe (Marposs) Counter spindle, parts catcher Workpiece conveyor, workpiece unloader Manual tool presetter (HS) Removable tool presetter (GS) 3-jaw chuck, hydraulic, Kitagawa BB 210 with foot pedal (HS) 3-jaw chuck, hydraulic, Kitagawa B 208 with foot pedal (GS) Bar loader IRCO BREUNING ILS - MUK Various tool holders, 0-40 mm Direct path measuring system, X, Y, Z axes Signal lamp, 4-color Chip conveyor High-pressure coolant system with compact filter unit, 70 bar / 700 l tank Operating manuals

Condition: used, Year of construction: 2023, Soundproof enclosure Oil drain pump Three-way valve, connectionfor e Generator / Mecc Old ECP322M4B engineAGCOPower33 DTG Manual control Fuel tank 200L / Bjdpferxur Ujx Acfslp

Condition: good (used), Year of construction: 2021, functionality: fully functional, Matec HV 700, Year of manufacture 2021, Heidenhain TNC 640 control system, Travel range X/Y/Z 2600/700/950 horizontal, Travel range X/Y/Z 2600/700/950 vertical, 50-position tool changer, HSK 63 tool holder, Spindle speed up to 15,000 rpm, NC swivel milling head +/- 105°, Swivel radius 250 mm, NC rotary table Ø 750 mm, IKZ (internal cooling) 20 bar, Paper band filter, Direct measuring systems, Chip conveyor, Electr. handwheel, Dynamics package, Software Kinematics Option, Measuring probe, Partition, S1 approx. 2000 total spindle hours, Bsdpfx Asy Thxzocfolp S2 approx. 25 total spindle hours.

Condition: like new (used), Year of construction: 2025, Ex-demo unit in like-new condition, originally packaged by the manufacturer, with warranty. PRODUCT DESCRIPTION The BINDER ultra-low temperature freezer ensures safe storage of samples at -90°C. It combines excellent environmental performance, low energy consumption, convenient operation, and a tailored safety concept. KEY FEATURES Temperature range: -90°C to -40°C Lowest energy consumption in its class High-performance refrigeration units with cascade compressors Environmentally friendly refrigerant R-290 and R-170 Thermal insulation with premium long-life VIPs (vacuum insulation panels) Modern door gasket concept reduces icing Ergonomic door closure lever Corrosion-resistant interior made entirely of stainless steel Removable inner doors made of stainless steel Bodpfxexlptbo Acfolp 3 freely positionable stainless steel shelves Water cooling (variant-dependent) Potential-free alarm contact for building alarm system integration Internal data logger; measurement values available in open format and can be read via USB Ethernet interface 3 access ports Ø 28 mm, at the rear

Year of construction: 2024, condition: ready for operation (used), Optical measurement machine manufactured in 2024. This KEYENCE VL 700 & VL770 features a blue LED measurement light source and operates on a power supply voltage of 100 to 240 VAC ±10%, 50/60 Hz. If you are looking to get high-quality optical measurement capabilities, consider the KEYENCE VL 700 & VL770 machine we have for sale. Contact us for further details. Bedpfx Aozzxi Recfslp - Measurement Unit Model: VL-770- Controller Model: VL-700- Year of Manufacture: 2024- Power Supply Voltage: 100 to 240 VAC ±10%, 50/60 Hz- Measurement Light Source: Blue LED

Condition: ready for operation (used), Year of construction: 2014, operating hours: 30,170 h, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, overall weight: 4,800 kg, number of axes: 2, CNC Turning Center manufactured in 2014. This DMG MORI NLX 2500/700 features a maximum turning diameter of 460 mm and a turning length of 795 mm. With a robust machine weight of 4800 kg and a rated power of 25 kVA, it is designed for precision and efficiency. If you are looking to get high-quality turning capabilities, consider the DMG MORI NLX 2500/700 machine we have for sale. Contact us for further details. • Machine type: CNC Turning Center • Year: 2014 Bodpfx Acez Akp Sefslp • Made in: Japan • Serial number: NL252340704 • Max. turning diameter: 460 mm • Max. turning length: 795 mm • Rated power: 25 kVA • Machine connected and available for inspection/testing. • Main electronic connection: 200 V, 3-phase, 50 Hz Technical Specification Through-spindle Coolant No Counter Spindle No Driven Tools No

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, For sale is a well-maintained Zimmer & Kreim genius 700 sinker EDM machine with Chameleon. Equipped with the following: • Travel range: 400 x 350 x 350 mm • Table: 575 x 500 mm • Workpiece weight: 700 kg • Genius 700 generator with Chameleon automation • 52 Ampere generator power • Rotary spindle • Internal, regulated heat exchanger • Fire extinguishing system, Kraft & Bauer • Extraction system • Control unit for automated or manual pallet handling • EROWA-ITS quick-change chuck • Software: 9.2.4, computer WIN7 Chameleon automation system with: • Chameleon base unit • 1 x rail • 1 x magazine • 75 electrode positions ITS EROWA • 6 UPC pallet positions EROWA or PARTOOL • 1 loading drawer • Identification system • EROWA double rotating gripper ITS • EROWA pallet gripper UPC / PARTOOL Process control system • JOBmodEDM Bodpfx Acoz R Daljfelp • PROGmod • Database Comfort • IDENTmod • SUPmod

Condition: reconditioned (used), Year of construction: 2016, operating hours: 20,564 h, turning diameter over cross slide: 742 mm, turning length: 700 mm, turning diameter: 366 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 795 mm, turning diameter over bed slide: 920 mm, overall weight: 4,700 kg, bar diameter (max.): 80 mm, CNC Lathe Manufacturer: DMG MORI Model: NLX 2500 Y | 700 Year of manufacture: 2016 Control system: Celos Mitsubishi M730U Technical specifications: - Turning diameter: 366 mm - Turning length: 700 mm - Swing over bed: 920 mm - Swing over cross slide: 742 mm - Max. spindle speed: 4,000 rpm - Drive power - main spindle: 18.5/18.5/15 kW - Max. bar diameter: 80 mm - Number of tool stations: 12 pos. - Tool interface: BMT 80 - X-axis: 260 mm - Z-axis: 795 mm - Y-axis: +/- 50 mm - Tailstock taper: MT5 - Operating hours: approx. 20,564 h - Power-on hours: approx. 28,664 h - Machine weight: approx. 4.7 t The machine has been refurbished with the following components: - Ball screws in X, Y, and Z axes - New main spindle - Complete maintenance package - Re-aligned and calibrated This puts the machine in like-new technical condition. Equipment & accessories: - Tool turret, 12 pos. BMT 80, max. speed 10,000 rpm, 5.5/5.5/3.7 kW - Y-axis - Overhang length for driven tools: 100 mm - Scraper-type chip conveyor - High-pressure coolant system (5 bar) - Coolant shower at main spindle chuck - Compressed air blow-off system for tool cutting edges - Line filter for coolant system - Compressed air blow-off system for tailstock center - Mechanical interface for 150 mm oil mist collector - 4-color signal light Bsdpfeyvvt Sex Acfjlp - EtherNet/IP interface for automation 2 machines are available. Price per unit. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit Blsdpjzz Rpcjfx Acfjp - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 531 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. Bjdpfsz Agv Usx Acfelp - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations Blodpez Agw Eofx Acfjp - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: ready for operation (used), Boiler plant for production of steam. Capacity : up to 12 MW Production capacity 16 ton per hour at 20 bar steam. Working pressure : From 5 bar to 20 bar Bodoy Av Rdjpfx Acfolp Steam temp 215 degrees C Designed for solid fuel like, wood chips, sawdust, bark

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: EWD DWK T-4, Log infeed Reducer Debarking Block conveyor EWD ZE infeed table Microtec 3D measurement Spaner FZ3 Roller unit EWD EVW Blsdpfx Aez Tfa Sjcfop Flexible double-shaft circular saw EWD DWK 700 T-6 6 flexible saw axes Cutting height 60-340 mm 2x200 kW Complete Siemens S7 control system, year 2014 Complete hydraulics/control cabinets

Condition: ready for operation (used), Year of construction: 2007, Additional Machine Details: Automatic buckles and roller Navigator control 1st unit : 6 motorized buckles Batch counter Blodpfx Acsza Ugdefop Noise hood Round Pile Feeder Till 230 meter per minute

Condition: good (used), Year of construction: 1999, clamping force: 2,000 kN, Manufacturer: KraussMaffei Kunststofftechnik München Bodpfoytiqwex Acfolp Model: KM 200-700 C2 Machine No.: 174406 International size designation: 700 C2 / 200 Year of manufacture: 1999 Clamping force: 2000 kN Clamping force: 200 t Injection unit size: 700 Machine weight: 8,800 kg Location: Freiburg

Condition: excellent (used), Year of construction: 2009, Arburg 370S 700-100/100 / 2K machine / operating hours: 33.544 in automatic mode / very good technical condition Year of manufacture: 2009 injection unit: Screw diameter: 30 mm injection weight: 65 g Injection pressure: 1390 bar Metering volume: 71 ccm Clamping unit: clamping force: 70 t tie bar distance: 370x370 mm size of clamping platens: 510x510 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: 2K machine Operating hours: 33.544 in automatic mode Euromap 67 Robot interface Air valve x 5 Hydraulic core pull x 2 Control with hot runners Reinforced injection units - bimetal Bodpez Iq A Tsfx Acfolp Proportional valves on injection units - precise spraying Parallel movements The vertical injection unit - screw diameter fi 20 mm (29 g/hp) Machine with cylinder / battery with compressed nitrogen (additional charge for fast work) Machine with the built-in conveyor belt Arburg and original sorting flap There is a possibility to buy an original Weber turntable It is possible to change screw diameters in both injection units for the screw diameters recommended by the manufacturer Dimensions: Weight: 4440 kg Length/width/height: 3.48x1.58x2.97 m Drive: Pumps/motor: 15 kW Heating power: 4,9 kW Total power: 19,9 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: used, Year of construction: 2000, functionality: fully functional, power: 8 kW (10.88 HP), input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 550 mm, cutting width (max.): 650 mm, total length: 2,250 mm, total width: 3,700 mm, overall weight: 2,400 kg, Equipment: CE marking, documentation/manual, lighting, motor brake, For sale: immediately available, fully operational vertical bandsaw, Friggi 104/FG 700 TS, manufactured in 2000. Work surface: 1200mm x 1500mm Table load capacity: 1000kg Vertical cutting capacity: 550mm Blsdpfozvhr Djx Acfop Horizontal cutting capacity: 650mm The machine is available for immediate delivery! Technical specifications can be found in the photo!

Condition: good (used), Year of construction: 1983, functionality: fully functional, Universal Production and Tool Milling Machine Type: UWF 700 PH Blsdpfx Acex Ry Atefsp Machine No.: 5670 Serial No.: 034650 Year of manufacture:1983 Control system: Positioning and path control incl. display HEIDENHAIN TNC 135 3-axis manual input control TECHNICAL DATA Working area X-axis (longitudinal) manual/automatic: 410/390 mm Y-axis (transverse) manual/automatic: 310/290 mm Z-axis (vertical) manual/automatic: 400/380 mm Quill travel vertical: 63 mm Clamping surface, vertical: 830 x 224 mm Number of T-slots: 4 Angular table clamping surface: 700 x 285 mm 6 T-slots: 12 H8/45 mm Workpiece weight: 200 kg Distance table – spindle nose (vertical): 0 – 515 mm Distance table – spindle center (horizontal): 30 – 565 mm Drive power (at 1500 rpm): 2.2 kW Speed range: 45 – 2000 rpm Number of speeds: 12 Speed progression (geometric steps): 1.4 Tool holder (DIN 2079): ISO 40 Feed range (all axes): 2 – 1500 mm/min Rapid traverse (all axes): 1.5 m/min Operating voltage: 380 V/50 Hz Machine dimensions: 1.2 x 1.6 x 1.7 m Space required: 2.1 x 2.1 m Machine weight: 1100 kg EQUIPMENT / ACCESSORIES  Hand operation and CNC program control  Vertical and horizontal machining  Swiveling vertical milling head  Adjustable-angle vertical milling head  Various tool holders  Manual quill feed (vertical)  Angular table 700 x 285 mm  Coolant system  Coolant and chip tray  Electrically secured chip guard in work area  Mounting elements  Machine lamp  Documentation Condition: Control system overhauled, workshop tested

Condition: used, Field of application: Construction Please contact Kristoff Van Havere for more information - CW45 hitch - 1700mm wide Bjdpj Af E Aisfx Acfolp

Condition: used, Horizontal rotary table Shelf diameter: Ø 700 mm x Height 160 mm Blsdsz Nht Tspfx Acfsp Total external diameter: Ø 790 mm Graduation in degrees Rotation by vernier

Condition: used, Year of construction: 1987, Technical details: x-travel: 700 mm y-travel: 500 mm z-travel: 600 mm table swivelling +/-: A-Achse: 20° / 60° Grad table rotating: B-Achse: 360° Grad control: Maho 432 (3-D Bahnsteuerung) Max. Milling-capacity: ST: 60 und GG: 22 mm tool changer with: 24 Plätze number of spindle speeds: 20 - 6300 U/min. max. table load: 200 kg spindle taper MT: ISO 40 (hydr. Spannung) spindle head swivable left - right: 90° (manuell) ° quill stroke: 80 mm feed range: X/Z: 1 - 3000 und Y: 1 - 4000 und B: 0,1 - 3000°/min. mm/min rapid traverse:: X/Z: 10 und Y: 8 und B: 20 U/min. m/min control voltage: 110/220 V Bledsu Idbyepfx Acfep total power requirement: ca. 20 kVA Weight approx.: 5,5 t dimension machine xH: 3,0 x 2,4 x 2,25 m space requirements of the machine approx.: 5,2 x 5,0 x H: 2,3 m NC rotary table Ø 520 mm with A and B axes Adjustable three-phase motor with 4-stage reduction gear Working spindle can be swiveled out for horizontal spindle Equipment: -manual control unit -coolant device -machine ilumination *

Condition: used, Year of construction: 2003, operating hours: 10,000 h, machine/vehicle number: PAL48, Used palettizer KEBER AXO4 700 bph General System Description The Used palettizer KEBER AXO4 700 bph delivers a robotic palletizing solution for high-volume operations in demanding industrial environments. KEBER built this model in 2003. The unit currently operates  under stable and verifiable conditions, with 10,000 recorded hours of use confirming its reliability. Moreover, the machine has shown consistent mechanical performance, which adds value to its operational lifespan. Production Capacity and Format Flexibility The Used palettizer KEBER AXO4 700 bph handles 4 to 6 cycles per minute, achieving an output of approximately 700 bottles per hour. As a result, it fits medium- to high-capacity bottling lines. The machine processes up to 20 container formats, allowing operators to switch between different product types with minimal reconfiguration. Consequently, production teams can meet varying packaging requirements without costly downtime. Robotic Handling System The palletizer uses a neck-gripping clamp system to transfer containers with precision and care. Unlike conventional palletizers, this robotic design eliminates mechanical limitations, improving adaptability across various layout configurations and container types. In addition, its gripping system maintains stability throughout the transfer cycle, reducing potential damage. Therefore, the unit ensures safe and accurate palletizing, even under continuous operation. Safety Features and Technical Documentation KEBER equipped the Used palettizer KEBER AXO4 700 bph with compliant safety protections, ensuring operator safety and adherence to current industrial standards. Importantly, the machine meets the safety requirements for CE-certified environments. The manufacturer also provides a complete set of technical manuals, enabling technicians to install, configure, and maintain the system effectively. Furthermore, these documents facilitate preventive maintenance scheduling and error diagnostics. Bjdpfxs Adyvuj Acfslp Production Line Integration The palletizer incorporates a floor-level slip-sheet dispenser and a pallet magazine, both integrated into the frame. Thanks to this configuration, the system requires no elevated structure or platform. The unit supports 1200×800 mm and 1200×1000 mm pallet sizes, allowing users to align it with common European and international logistics platforms. As such, integration into existing layouts becomes straightforward. Automation and Process Control The automation system relies on a Siemens S7-300 PLC, which offers seamless integration into SCADA and HMI environments. Consequently, engineers can control, monitor, and adjust operations from central control systems. The unit operates on 400V / 50Hz and draws 15 kW of electrical power, ensuring compatibility with standard industrial infrastructures. Moreover, the powe...

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, total height: 2,600 mm, total width: 1,800 mm, table load: 160 kg, overall weight: 5,600 kg, spindle speed (max.): 12,000 rpm, product length (max.): 2,630 mm, number of axes: 3, This 3-axis Akira Seiki RMV 700 APC was manufactured in 2013. It features an X-axis travel of 700 mm, Y-axis travel of 400 mm, and Z-axis travel of 400 mm. The machine includes a robust table size of 700 mm x 400 mm with a maximum load capacity of 160 kg. If you are looking to get high-quality machining capabilities, consider the Akira Seiki RMV 700 APC vertical machining centre we have for sale. Contact us for further details. • Table: 700 × 400 mm Bsdpfsyvip Tex Acfelp • Spindle: 12 HP (max 15 HP); cooling: air, through-spindle coolant (CTS), and external coolant • Rapid traverse (X/Y/Z): 48 / 60 / 72 m/min • Accuracy: positioning 0.012 mm; repeatability ±0.005 mm • Tool changer: 24 + 1 servo-controlled; max tool Ø 75 mm; max tool length 200 mm; max tool weight 4.5 kg • Change times: tool-to-tool 1.9 s; chip-to-chip 3.4 s • Control: AKIRA Mi:845 (compatible with FANUC G-code) • General data: coolant tank 150 L; power requirement 25 kVA; required air pressure 0.5 MPa • Application: suitable for light machining, especially non‑ferrous metals and composite materials Additional equipment • Twin pallet system (APC) Technical Specification Taper Size HSK 63