Used Valtra/Valmet 6800 for sale (173)

Condition: good (used), Year of construction: 2019, functionality: fully functional, Valmet RoboCoiler for automatic de-wiring of bales. There are 2 units. Each unit consist of a turntable, metal detection, cutting and spooling unit. CHARACTERISTICS ▪ Max. 140 balen/hr ▪ Bale length: 700 – 1000mm ▪ Bale width: 580 – 900mm ▪ Bale height: 350 – 650mm Fjdszy Nlaopfx Ahdjgh ▪ Bale weight: max. 333kg ▪ Wire diameter: 1.8 – 3.0mm ▪ Strength: 500 – 1250 N/mm2

Year of construction: 1985, condition: used, functionality: fully functional, PM 5 PAPER MACHINE + STOCK PREPARATION / DEINKING PLANT + GOEBEL U16M !contact for full details and photos! Package sale of an integrated paper production installation in Hainsberg, Germany. The package includes the PM 5 paper machine, its associated stock preparation and deinking plant, and a Goebel U16M roll slitter rewinder. PM 5 was originally built in 1985 and modernised several times. Main sections: approach-flow system – PAMA; headbox – Voith; Fourdrinier section – PAMA; top-wire former – Valmet; press section – PAMA; dryer sections – PAMA; SpeedFlow system – Voith; after-dryer section, calender and Pope reel – PAMA. Fgjdez Hvmhjpfx Ahdsh Reported modernisations: Valmet top-wire former (1994); approach-flow system expansion/modernisation (2002–2003); MAP quality-control system (2006); Voith SpeedFlow (2009); automatic tail cutter (2025). PM 5 specifications: • Working width: approx. 2,730 mm; trimmed width: approx. 2,640 mm • Maximum speed: up to 600 m/min • Maximum gross capacity: up to 150 tonnes/day • Basis-weight range: approx. 45–130 g/m² • Grades produced include office, copy, writing, printing, envelope and newsprint papers • Installed electrical power: approx. 2.5 MW • Steam consumption: up to approx. 16 tonnes/hour Stock preparation/deinking plant: • Normal capacity: approx. 125 tonnes/day; up to approx. 140 tonnes/day under suitable raw-material and process conditions • Essential components listed in the available technical documentation are reported to remain installed on site • Older Siemens S5 and Teleperm control and automation system Goebel U16M: built in 2005, machine no. 053-9031. Working width 2,800 mm; maximum speed 2,000 m/min; maximum unwind diameter 2,000 mm; maximum rewind diameter 1,500 mm; minimum cutting width 150 mm. Available accessories include winding shafts and an edge-trim extraction system with shredder and flat turbo disintegrator. Operating status: Production stopped on 23 January 2026. According to the seller, PM 5 and the stock preparation/deinking plant were operating until the controlled shutdown. The Goebel U16M was also reported operational until that date, with no significant functional faults known. None of the equipment has been restarted or tested under production conditions since shutdown. Current functionality has not been verified. Fampa Roller – offered as is (brake-control system defective; out of operation since end of 2024) RPM LAMB – offered as remaining equipment/components (incomplete, partly dismantled; out of operation since 2025) Maximum capacities depend on paper grade, raw material and operating conditions. Inspection by appointment. Price on request.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, operating hours: 313 h, power: 114 kW (155.00 HP), fuel type: diesel, maximum speed: 50 km/h, first registration: 01/2024, next inspection (TÜV): 07/2029, color: green, overall weight: 6,500 kg, front tire size: 540/65R28, rear tire size: 650/65R38, motor manufacturer: AGCO Power, gearing type: mechanical, Equipment: additional headlights, air conditioning, cabin, front power take-off, hydraulics, lighting, trailer coupling, Valtra N155 Forestry – Top-spec – 50 km/h – Front PTO – Olive Green Metallic For sale is a very well-maintained Valtra N155 forestry tractor in the exclusive olive green metallic paint finish. The tractor impresses with its extensive equipment and is ideally suited for both forestry and agricultural applications. Technical data: Manufacturer: Valtra Model: N155 Forestry First registration: 2024 Power: approx. 114 kW / 155 hp Fuel: Diesel Emission stage: Stage V Transmission: DPS Power Shuttle 30/30 Maximum speed: 50 km/h Total weight: 6,500 kg Next §57a/TÜV inspection: 07/2029 Tires: Front: 540/65 R28 Alliance Forest Rear: 650/65 R38 Alliance Forest Equipment: Cab with automatic climate control and footwell heater Front hydraulics and front PTO Rear linkage HD 4 hydraulic rear control valves Power Beyond 2 hydraulic front control valves Automatic trailer hitch (38 mm pin) Premium work lights Fsdpozi Erbjfx Ahdsgh 2 yellow rotating beacons Forestry equipment Roof-mounted work light and extensive lighting system The tractor is in very good condition and is ready for immediate use. Viewings are possible at any time by appointment.

Condition: good (used), functionality: fully functional, Valmet Sunds pulp dewatering press / bleaching press * Roll diameter: 900 mm * Roll length: 2820 mm * Roll speed: 2 - 15 revolutions/min Fjdpfxez Hc A Ao Ahdsgh * Roll gap: 3 - 13 mm

Condition: used, Year of construction: 1996, functionality: fully functional, Max. roll diameter: 1,300 mm Fodsz It D Hjpfx Ahdogh Roll core: 76 / 100 / 152 mm (unwinding), only 152 mm (rewinding) 2 rotogravure stations + inline adhesive coating unit Drying: diathermic oil system, vertical + horizontal tunnels Cooling rollers after each station Control: Siemens S5, DC drives Processes: barrier coating, lamination (paper + aluminum/plastic), inline primer CE certified, incl. thermal oxidizer (RTO25) and steam generator (Ferroli)

Condition: like new (used), Year of construction: 2010, operating hours: 487 h, functionality: fully functional, overall weight: 1,100 kg, volume flow: 358 m³/h, power: 125 kW (169.95 HP), type of cooling: water, rotational speed (max.): 1,500 rpm, Diesel water pump set, Sprinkler unit with few operating hours, in excellent condition for sale. 358m3/h Manufacturer: SISU Type: 420DSJPL Year of manufacture: 1996/ 2010 new turbo freshly serviced Fgodjyi H Eqjpfx Ahdsh Power: 120 kW, 2940 rpm Pump: KSB ETANORM MX125-250 year: 2010 Capacity: 358 m3/h delivery height: 86 meters Power: approx. 180 HP Weight: 1200 kg self-starting water cooling built on a mobile chassis Operating hours: approx. 473 hours If you need more information, we will help you! Please contact us using the form or call us by phone. Your ad has been automatically translated. Translation errors may occur.

Condition: used, Year of construction: 2015, operating hours: 4,108 h, power: 151 kW (205.30 HP), Equipment: air conditioning, all wheel drive, cabin,

Condition: good (used), functionality: fully functional, Paper production line consisting of stock preparation, paper machine, inline coaters, calander, reeler, offline calander, slitter winders and reel packer. Fully upgraded by Valmet in 2019, including formmaster, topformer, shoepress, pre-dryer section, inline coating, multinip calender and reeler. Fodpfx Ahsvptbuedogh Characteristics: Capacity: max ~ 350000 T/pa Width: 7500 mm Grammage: 35 – 170 gr/m2 Speed: max 1400 m/min

Condition: used, Year of construction: 2015, front tire size: 650/60R34, Equipment: compressed air brake, Rear wheel weights Lower links Cat 3/3 Quick Steer Valtra Evolution / seat 2x sockets 12 V Tires 4x NEW front Mitas 650/60 R34 / Fedjr N Apfopfx Ahdsgh

Condition: ready for operation (used), Dry sorting line (17 pockets) Manufacturer - SATEKO (Valmet) modified - 1996 (7pcs) & 2023 (3pcs) Total number of pockets - 17 pcs Separate rake conveyor on top. Drop from above Latest update 3 pockets in 2023 (Biocone) Main layout attached Fgsdpfx Aexmr Rrehdoh

Condition: used, functionality: fully functional, Year of construction: 1992, operating hours: 16,201 h, load capacity: 25,000 kg, lifting height: 6,050 mm, fuel type: diesel, mast type: triplex, construction height: 3,900 mm, motor manufacturer: volvo, fork length: 2,390 mm, fork width: 250 mm, Equipment: cabin, lighting, pallet forks, Brand: Valmet Type: TD031 Drive-through height: 390 cm Lifting height: 605 cm Capacity: 25,000 kg Drive: Diesel Year of manufacture: 1992 Operating hours: 16,201 3+4+5 valve (side-shift, hydraulic fork adjustment, hydraulic leveling) Triplex mast Pneumatic tires (front twin tires) Fork length: 239 cm Fork width: 25 cm Forks together, outside: 85 cm Fodpfxjwuqpfo Ahdsgh Forks apart, outside: 288 cm 6-cylinder Volvo engine Enclosed cabin

Condition: ready for operation (used), Year of construction: 1998, Working width: 650-1305mm, exception PET/ALU/PE and ALU/PE: max. 1100mm, production speed: 120-220m/min, max. operating speed: 300m/min, max. primary unwinding roll diameter: 1000mm, core inner diameter cardboard core: 76/152mm, steel core: 150mm, adhesive application 2K for film/film: approx. 1.5-2.5g/m², 1K for paper/film: approx. 2.5-4g/m², max. secondary unwinding roll diameter: 1000mm, core inner diameter cardboard core: 76/152mm, steel core: 150mm, max. rewinding roll diameter: 1200mm, core inner diameter cardboard core: 152mm, steel core: 150mm, processable materials, min. polyester film: 10µm, min. aluminum foil: 6.6µm, min. PE film primary unwinder: 40µm, min. PE film secondary unwinder: 30µm, max. paper: 150g/m², length: 8625mm, complete documentation vorhanden. An on-site inspection is possible. Fodpfx Aoy Uydfehdogh

Condition: used, Year of construction: 2015, front tire size: 540/65R30, rear tire size: 620/70R42, Equipment: compressed air brake, Tires on front axle are municipal tires / Fsdjt I E Uaspfx Ahdegh

Condition: used, Year of construction: 2015, front tire size: 540/65R30, rear tire size: 650/65R42, Equipment: compressed air brake, Gearbox NEW !!! / Fodor Nwkxspfx Ahdjgh

Condition: used, Year of construction: 2023, Equipment: compressed air brake, BLACK METALLIC Valtra Guide centimeter NTRIP (NovAtel) contour assistant / Fsdpfx Aot Eckyjhdegh

Condition: used, Year of construction: 2022, Valtra Guide centimeter additional display SC - VRC - Contourassistent Auto / U-Pilot cab suspension Auto Comfort 1pair front coupler front / working lights Premium Engine: AgcoPower 7,4Ltr 6Zyl Engine preheating / U-Pilot headland management On-Of Fgjdjtq Ey Iopfx Ahdoh

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 157152, MAZAK FH-6800 – Technical Specifications Manufacturer: Mazak Model: FH-6800 Year of manufacture: 2001 Machine type: Horizontal CNC Machining Centre CNC control: MAZATROL PC-FUSION 640M Number of axes: 4-axis Working range • X-axis travel: 1,050 mm • Y-axis travel: 800 mm • Z-axis travel: 880 mm • Pallet size: 630 × 630 mm • Pallet load capacity: approx. 1,500 kg • B-axis: 360° indexing • B-axis resolution: 0.001° Spindle • Spindle taper: CAT 50 • Maximum spindle speed: 7,000 rpm • Spindle motor: approx. 37 kW • High-pressure coolant through spindle: Yes, documented at 70 bar on one 2001 specification sheet Tool changer • Tool magazine capacity: 120 tools Fgodpfjz D Azyjx Ahdsh • Tool holder: CAT 50 • Automatic Tool Changer (ATC): 120 stations

Condition: used, Year of construction: 2023, Soundproof enclosure Oil drain pump Three-way valve, connectionfor e Generator / Mecc Old ECP322M4B engineAGCOPower33 DTG Manual control Fuel tank 200L / Fedpfjrxur Uex Ahdsgh

Condition: ready for operation (used), Boiler plant for production of steam. Fgodpfx Ahey Av Rdodoh Capacity : up to 12 MW Production capacity 16 ton per hour at 20 bar steam. Working pressure : From 5 bar to 20 bar Steam temp 215 degrees C Designed for solid fuel like, wood chips, sawdust, bark

Condition: used, Year of construction: 2023,

Condition: used, Year of construction: 2023, black metallic / Fjdpsrxtb Usfx Ahdjgh

Condition: used, Year of construction: 2023, front tire size: 600/70R30, rear tire size: 710/70R42, Equipment: compressed air brake, OLIVE GREEN METALLIC Armrest with hydraulic joystick SmartTouch Terminal / Fgjdpet Srcrjfx Ahdoh

Condition: used, Year of construction: 2021, Antenna for steering system submeter activation 20cm accuracy suitable for / Valtra models of level 4 N134 - T254 / Fgodpjtvgpfofx Ahdeh

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 20190824, spindle diameter: 125 mm, total width: 1,600 mm, total height: 1,680 mm, total length: 3,040 mm, overall weight: 2,700 kg, spindle speed (max.): 6,800 rpm, workpiece height (max.): 100 mm, type of input current: three-phase, workpiece width (max.): 180 mm, input voltage: 380 V, table length: 2,000 mm, number of spindles: 4, power: 28.75 kW (39.09 HP), input frequency: 50 Hz, Description: -Solid construction cast iron and welded metal frame -Working table fully cromed to ensure firm advance of materials -side guide rollers for materials with pneumatic driving -professional cardan transmission for the feed system -feed speed up to 33m/min mechanically adjustable with mechanical variator with with elastic pulley -manual central lubrification pump -radial and axial adjustment of the working axes with mechanical displays for precise positions -electrical adjustment of working thickness -ergonomically positioned contro panel according UE standard -Hours:200 hours -Technical data: -electric connected load-21 kw -operating voltage:400v,50hz,3 phase -air required pressure:min 6bar -dimension: 3040x1600x1680mm - -weight:2800 kg -food table length:2000 mm -steplessly adjustable feed speed 8-33 m/min -axes diameters:40 mm - Ax1 - down: Ø125mm (Ø152mm channel cutter), 4kW -Ax2 - right: Ø115-170mm, 4kW - Ax3 - left: Ø115-170mm, 4kW - Ax4 – up: Ø105-150mm, 5,5kW -axis rotation:6800 rpm -advance engine power:3kw -dimension rolling advance: Ø140x35x50 mm -exhaustive dimension: 4x120mm Technical data of the material: -materials width: 20-180mm -material thickness: 8-100mm Fedpez E H H Nefx Ahdegh

Condition: good (used), Year of construction: 2007, travel distance X-axis: 1,050 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 880 mm, spindle speed (max.): 7,000 rpm, Used Mazak FH-8800 horizontal machining center Max spindle speed: 7000 rpm Including spindle cooling Z-880 X-1050 Fgjdpfx Ahsyvf Ttjdjh Y-800 Tool magazine for 80 tools 1 spindle, 2 pallets, 500x500 mm cubes, 4-axis (x-z-y-b)