Double-crimping press with 2 benches of cm. 110 x 65

Condition: ready for operation (used), Year of construction: 2021, operating hours: 590 h, functionality: fully functional, table length: 6,000 mm, table width: 2,000 mm, Machine with only 590 cutting hours! Submitting a bid obligates you to collect the machine by June 30, 2026! TECHNICAL DETAILS Table length: 6,000 mm Table width: 2,000 mm Piercing: up to 16 mm Maximum permissible sheet metal thickness: 100 mm Hodpfszc Euqjx Adrsnn MACHINE DETAILS Operating hours Machine running hours: 5,400 h Cutting hours: 590 h EQUIPMENT Power source: Hypertherm Powermax 65 Pin marker TEKA filter system Thanks to a compatible cutting head, 125 amps are possible with the installation of a new power source.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 15,000 h, punching force: 18 t, sheet thickness (max.): 8 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, workpiece weight (max.): 230 kg, MACHINE DETAILS Format: Large format Beam operating hours: 15,000 hours Laser operating hours: 59,000 hours EQUIPMENT Sheetmaster Toolmaster Note: The machine will continue to be operational until 07/09/2026! The following data is taken from a manufacturer's data sheet. The seller cannot guarantee the accuracy of the data (the data sheet is attached to the listing): TECHNICAL DETAILS Travel range X-axis: 3,050 mm Travel range Y-axis: 1,550 mm Sheet thickness max.: 8 mm Punching force max.: 180 kN Hedpsza Urgofx Adrenn Workpiece weight max.: 230 kg

Condition: ready for operation (used), Year of construction: 2009, operating hours: 22,000 h, functionality: fully functional, turning length: 600 mm, turning diameter over cross slide: 410 mm, spindle speed (max.): 22,000 rpm, controller model: Heidenhain 4290, Submitting a bid obligates the buyer to collect the machine by June 24, 2026! The machine will be dismantled on June 17, 2026, and then stored temporarily. The Z1 linear guide was recently renewed, and the S2 revolver drive was recently replaced. TECHNICAL DETAILS Turning length: 600 mm Turning diameter over cross slide: 410 mm Spindle speed: 22,000 rpm Tool turret: 12-position Tool holder: VDI 40 MACHINE DETAILS Control system: Heidenhain 4290 Hnjdjzcpwcspfx Adrsn Operating hours Total operating hours: approx. 87,000 h Spindle hours: approx. 22,000 h EQUIPMENT Large accessories package Powered tools from WTO Note: The seller can offer transport of the machine within Europe for an additional fee (offer upon request).

Condition: ready for operation (used), Year of construction: 2002, operating hours: 53,548 h, functionality: fully functional, machine/vehicle number: 01160014061, turning length: 630 mm, turning diameter: 420 mm, vice opening: 66 mm, control type: CNC control, Equipment: chip conveyor, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Hnedjza D Rfopfx Adrsn Working area Turning diameter: max. 420 mm Turning length: max. 630 mm Spindle bore: 66 mm Turret Tool head: 12 tools, Sauter VDI30 CNC control: 4290 Heidenhain MACHINE DETAILS Electrical data Voltage: 400 V Auxiliary voltage: 230 V / 24 V Frequency: 50 Hz Current: 80 A Connected power: 44 kVA EQUIPMENT C-axis with driven tools Machine chip conveyor Documentation 2 driven tool holders External reference: 598

Condition: ready for operation (used), Year of construction: 2010, operating hours: 5,744 h, functionality: fully functional, machine/vehicle number: 6100000012E, turning length: 393 mm, turning diameter: 228 mm, spindle speed (max.): 3,000 rpm, vice opening: 51 mm, Equipment: chip conveyor, No minimum price – guaranteed sale to the highest bidder! Lathe equipped with a tailstock and chip conveyor! TECHNICAL DETAILS Working range Turning diameter: 228 mm Turning length: 393 mm Distance between centers: 51 mm Spindle speed: max. 3,000 rpm Turret Turret head: Sauter VDI30 MACHINE DETAILS Electrical connection data Voltage: 400 V Hsdpfeza D Iwsx Adrsnn Frequency: 50/60 Hz Weight: 3,500 kg Operating hours Power-on hours: 20694 Working hours: 5744 EQUIPMENT Chip conveyor with coolant tank and pumps 3 driven tool holders WTO 4 standard holders VDI30 Tool probe Chuck: Kitagawa 210 mm Tailstock Machine manuals External reference: 603

Year of construction: 1995, condition: ready for operation (used), functionality: fully functional, total length: 2,100 mm, total width: 730 mm, heating capacity: 7.5 kW (10.20 HP), screw conveyor diameter: 35 mm, machine/vehicle number: DE27307, TECHNICAL DETAILS Capacity: 30 – 80 kg/h Screw diameter: 2 x 35.0 mm L/D ratio: 20:1 Screw speed: 80 rpm Gearbox ratio: 12:1 Number of heating zones: 5 Heating power: 7,500 W Number of cooling fans: 5 Extruder discharge height: 1,150 mm MACHINE DETAILS Control system: Analog, contactor-controlled system Drive / Motor: 20 kW (DC) Cooling fan connection: 230 V Gearbox type: Lenze Material: PE, PP, PS, ABS Design: Co-rotating, degassing, vacuum pump Hsdpfxezargnj Adrsnn Dimensions (L x W): 2,100 x 730 mm Note: Water bath and granulator can be purchased for an additional charge.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 460 mm, spindle speed (max.): 10,000 rpm, controller model: Siemens Sinumerik 828D CNC, ATTENTION – Equipment update: Instead of a RENISHAW measuring probe, a Renishaw tool presetter is included! TECHNICAL DETAILS Travel range X-axis: 760 mm Travel range Y-axis: 430 mm Travel range Z-axis: 460 mm Spindle mount: SK40 Spindle speed: 10,000 rpm Feed rate: 10,000 mm/min Table size X: 900 mm Table size Y: 410 mm Hnedjzap Dwjpfx Adren Max. workpiece weight: 350 kg Number of axes: 3 MACHINE DETAILS Control system: Siemens Sinumerik 828D CNC Tool changer: 24-position Drive power: 12 kW Tool cooling through the spindle: 30 bar EQUIPMENT Renishaw tool presetter Chip conveyor

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, controller model: Mitsubishi 32-bit EDM Steuerung, TECHNICAL DETAILS Travel range X-axis: 400 mm Travel range Y-axis: 300 mm Travel range Z-axis: 300 mm Max. workpiece size X: 700 mm Max. workpiece size Y: 500 mm Max. workpiece size Z: 250 mm Max. electrode weight: 50 kg Max. workpiece weight: 500 kg Table size X: 550 mm Table size Y: 470 mm Hsdpfozapyljx Adrjnn MACHINE DETAILS Control: Mitsubishi 32-bit EDM control Electrode changer: 20-position Generator: 50 A EQUIPMENT Lowerable container

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, cutting height (max.): 250 mm, cutting width (max.): 280 mm, saw band length: 2,950 mm, saw band speed: 1,667 mm/s, saw band width: 27 mm, TECHNICAL DETAILS Saw band dimensions: 2,950 x 27 x 0.9 mm Speed: 15-100 m/min Vise opening: 285 mm Cutting capacity at 90° (round): 250 mm Cutting capacity at 90° (square): 220 mm Cutting capacity at 90° (rectangular): 280 x 220 mm Hsdszapxzspfx Adronn Cutting capacity at 60° (round): 120 mm Cutting capacity at 60° (square): 80 mm Cutting capacity at 60° (rectangular): 140 x 100 mm Cutting capacity at 45° (round): 230/200 mm Cutting capacity at 45° (square): 200/170 mm Cutting capacity at 45° (rectangular): 220 x 200/200 x 140 mm Control: conventional MACHINE DETAILS Total power requirement: 2.2 kW Weight: 990 kg Machine dimensions: 2,500 x 2,230 x 2,050 mm

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, cutting height (max.): 260 mm, cutting width (max.): 320 mm, saw band length: 3,150 mm, saw band speed: 667 mm/s, saw band width: 25 mm, TECHNICAL DETAILS Saw band dimensions: 3,150 x 25.4 x 0.9 mm Speed 1: 20 m/min Speed 2: 40 m/min Cutting capacity at 90° (round): 260 mm Cutting capacity at 90° (square): 250 mm Cutting capacity at 90° (flat): 320 x 200 mm Cutting capacity at 45° (round): 230 mm Hsdpfx Adszapv Tjrenn Cutting capacity at 45° (square): 210 mm Cutting capacity at 45° (flat): 240 x 200 mm Control: NC EQUIPMENT - Saw band storage