Throughfeed carcass press LIGMATECH MPP 15 (1998)

LIGMATECH MPP 15

Continuous body press
Manufacturer: LIGMATECH
TYPE: MPP 15
Year of manufacture: 1998
The MPP 15 is a flexible press for batch-related production without setup times.
The MPP 15 can be used individually or in various combinations in an assembly line.
The pressing forces are applied pneumatically. The separately adjustable vertical and horizontal pressure allows for pressing both horizontal and vertical bodies.
The vertical forces are transmitted through a plate, while the horizontal forces act on the body via press cheeks.
The position of the center press cheeks can be adjusted using adjustable stops, allowing for different heights of bottoms and sides.
During the infeed process, the body is measured photoelectrically, which automatically positions the horizontal pressure bar.
Technical data:
Body dimensions:
Length: min. 300 mm / max. 2300 mm
Height: min. 300 mm / max. 1220 mm
Depth: max. 600/800/1000 mm (depending on the press type)
Pressing pressure:
vertical max. 17 kN
horizontal max. 16 kN
Working height: 500 mm
Transport speed:
min. 8 m/min. / max. 37 m/min.
Ibjdjzuzv Tspfx Ah Eja
Pressing time: selectable up to 999 s
Operating voltage: 400 V, 50 Hz
Control voltage: 24 V DC (according to VDE)
Required air pressure: 5...8 bar
Air consumption: 120 NL/cycle
Total connected load: 3 kW
Weight: approx. 4 tons
Required room height: 3000 mm
Extended infeed belt as a staging area
Note:
The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

The listing was translated automatically. Translation errors are possible.