Folding machine

Hezinger MFA 3200 x 3 mm

Condition: new, The 40 MP is a single-head saw with top-down cutting action, featuring a saw blade diameter of ø 400 mm. Comparable to Emmegi, Elumatec, Pressta-Eisele, Mecal, Fom, etc. The saw table can be manually adjusted to an angle of +/- 45°. The saw head can be manually tilted from 0° to 45° outwards. The 40MP single-head saw is equipped with horizontal clamping cylinders for secure profile clamping, minimal spray lubrication, and mechanical protection of the sawing area. Fpedpjrfapajfx Af Dec Please also see our used stock machines from Emmegi, Elumatec, Pressta Eisele, etc.

Condition: new, saw blade diameter: 400 mm, - Saw blade 400 mm - Double miter Fsdpfx Afju Si Ndj Djpc - 4 pneumatic clamps - Mist lubrication system - Blow gun - Protective cap - documentation - 400V

Condition: new, empty load weight: 2,600 kg, maximum load weight: 900 kg, overall weight: 3,500 kg, axle configuration: 2 axles, suspension: other, color: silver, Car trailer with twist locks for 20 ft. container. LED lighting, wheels 155 R12C 5x112, double axle, 3500 kg permissible total mass, unladen weight approx. 650-700 kg, hot-dip galvanized, 4 pcs. Crank supports, license plate holder. Incl. papers for registration, 100 Km/h registration possible! Wooden plate possible for an extra charge! New 20 ft. Office container (Containex) Exterior color: RAL-9010 pure white Stacker pockets Wall insulation mineral wool 60 mm Roof insulation mineral wool 100 mm Floor insulation mineral wool 100 mm Container interior height 2540 mm 1 pc. 2 Kw. Convector 2 pcs. Surface-mounted light 43 W LED Total weight of trailer + container 2600 KG Payload of 900 kg still possible! Fjdpfx Aoi Ha Eyof Dspc

Condition: new, - Semi-automatic Fodpsryp N Rofx Af Dopc - Saw blade 420 mm - Double miter - 4 pneumatic clamps - Mist lubrication system - Roller conveyor 300 cm with length stop - Blow gun - Protective cap - documentation - 400V

Condition: new, Year of construction: 2025, working width: 2,500 mm, bending angle (max.): 125 °, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 4 mm, overall weight: 1,600 kg, total length: 30,000 mm, power: 4 kW (5.44 HP), height adjustment type: hydraulic, stroke length: 270 mm, features Bending capacity of 2500 mm x 2 mm NC-89 digital programmable single angle control for angles from 0-125º Automatic cycle: after clamping, the lower bar bends to the set angle and returns, the head releases to the set position Szybka akcja szybka regulacja głowicy w celu zoptymalizowania promienia gięcia na grubości materiału 0,5-2 mm Durable construction made of steel Convertible foot pedal includes control panel for maximum flexibility High-quality components ensure reliable performance for years of continuous operation NC-89 opening height adjustment NC-89 stop clock control ensures constant bending angle Extended fingers allow bending pans or boxes to a depth of 205 mm Includes adjustable rear hand bumper, also adjustable for tapered material Mild steel performance is evaluated on hot rolled material with 250 MPA MODEL HZM 2×2500 Type of controller NC-89 Single program (mm) Bending length 2500 (mm) Mild steel bending 2 (mm) Stainless steel bending 1) Type of material attachment Hydraulic clamp Type of material bending hydrauliczne Bend angle indicator 0-125º (mm) Bumper stroke 1000 Fpsdpfx Ajq Apdujf Dec (kW / hp) Engine 2,2 / 3 (V) Voltage 230 (cm) Shipping dimensions (L x W x H) 300 x 81 x 150 (kg) Net weight 1600

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, PowerBend Professional 3,200 × 3.0 Working length (a) 3,240 mm Sheet thickness 400 N/mm² 3.0 mm Machine length (b) 5,700 mm Machine height with swivelling arm 2,313 mm Machine width with back gauge (c) 1600 mm closed table 3,223 mm U-1600 3,223 mm U or rather J-3200 4,955 mm Weight of basic machine (ca.) 7800 kg Fedpfsyaw Aujx Af Depc Weight incl. rot. clamping beam (ca.) 9200 kg Clamping beam Geometry 48° (180°) Stroke 500 mm Drive power 2 x 2.2 kW Speed 65 mm/sec Folding beam Drive power 2 x 3.0 kW Speed 100 °/sec Folding beam adjustment, motorized 150 mm Folding center adjustment +80/-20 mm

Condition: new, - Saw blade 400 mm - double miter - 4 pneumatic clamps - Hydrocheck system - Automatic protection cover - Mist lubrication system - 1 roller conveyor 300 cm - 1 roller conveyor 300 cm with longitudinal stop Fpsdpfxjh A Haas Af Doc - Blow gun - Documentation - 400V

Year of construction: 2025, condition: new, With our manual length stop MD 50 d, we offer you an inexpensive length stop that is extremely easy to use in order to increase the productivity and quality of your production. It is quickly brought into position by the user and securely clamped there using a hand lever. The length measurements are taken via an easy-to-read digital display on the carriage. Existing machines / roller conveyors can be retrofitted at any time. Fpsdpfx Afsidln Ns Djc

Condition: new, Year of construction: 2026, Supercharge your aluminium cutting productivity with one of the most flexible, large-capacity saws around. A550 is designed for high mitre angle cutting with a huge ±75º saw mitre range supported by a large capacity blade to provide genuine high-angle cutting capability but without compromising on the aluminium size you may need to cut. Suitable for bundle-cutting many profiles at once and with high-precision. High-speed aluminium processing with precision PLC controlled motion. Pneumatic-actuated safety guard opening and closing with a press of a button for full unimpeded saw table access. Safety switch disabling of the saw on guard up. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø550 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW chip vacuum extractor • Optional automated mitre control system Fpsdsmb U Tfjpfx Af Djc Highly suitable for: • Windows and doors manufacture • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales

Condition: new, - Saw blade 400 mm - Double miter - 4 pneumatic clamps - Hydrocheck system - Automatic protective cover - Mist lubrication system Fedpercbb Ajfx Af Dopc - 1 roller conveyor 300 cm - 1 roller conveyor 300 cm with length stop - Blow gun - Documentation - 400V