SCRAPING MACHINE

H. BRÄNDLE

Condition: excellent (used), TECHNICAL CHARACTERISTICS Capacity: Chuck diameter: 3.000 mm Maximum turning diameter: 3.110 mm Maximum piece weight: 20 Tn Revolutions: 1,5-39,5 Rpm Main motor power: 45 Kw Movable crossbeam: 1.200 mm Height under crossbeam: 1.800 mm Vertical lathe with two arms: Right carriage pentagonal turret 5 positions with automatic rotation X travel: 1,500 mm Z travel: 965 mm Left slide with RAM Travel X: 1.500 mm Travel Z: 1,200 mm Remarks: Independent control panel 2 x CNC Fagor 8055 for the control of the 2 slides from the same screen. Grinding head (optional) Fpodper Ddu Djfx Aa Sor Year of manufacture/reconstruction: 1975/2001

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 250 mm, feed length Z-axis: 160 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 480 mm, spindle speed (max.): 9,000 rpm, feed rate X-axis: 2 m/min, feed rate Y-axis: 2 m/min, feed rate Z-axis: 1 m/min, spindle speed (min.): 100 rpm, quill stroke: 160 mm, table width: 320 mm, table length: 880 mm, X-500, Y-250 , Z- quill stroke 160 , W- traverse path machine head 480 , table 880 x 320 , max. 320 kg , fixture SF 32 , 100-9000 rpm , 5 kW , 60 Nm , Heidenhauin TNC 124 Many accessories Fjdsq R Rb Hopfx Aa Sjpr

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, roller (bottom) diameter: 495 mm, roller (top) diameter: 515 mm, side roll diameter: 355 mm, roller diameter: 495 mm, roller length: 2,000 mm, working width: 2,000 mm, sheet thickness steel (max.): 60 mm, overall weight: 29,200 kg, total length: 5,770 mm, total width: 2,390 mm, total height: 2,760 mm, power: 55 kW (74.78 HP), Equipment: documentation/manual, Interchable top roller 410mm Fjdpfxjv Nhkwe Aa Sepr

Condition: repair required (used), Machine number: 1464 TyP / Model: FUW 250/IV travel x-y-z: 400 - 220 - 400 mm table: 630 x 350 mm Fpodpfx Ajd Hl Stea Sor table clamping surface: 700 x 300 mm speed range: 45 to 2.240 rpm spindle mounting: SK 40 feed range longitudinal: 6,3 to 1.250 mm/min feed range cross: 6,3 to 1.250 mm/min Connection: 7.4 kW accessories/equipment: vertical head Condition: 2 controllers defective Note: machine repair EUR 2.000 weight: 1,45 t dimensions: 1.500 x 1.600 x 1.800 mm

Condition: excellent (used), functionality: fully functional, turning diameter over cross slide: 580 mm, spindle bore: 84 mm, turning diameter: 870 mm, Geminis lathe model GE 870 of 4000mm between points, turning on bed 870mm, turning on cross slide 580mm, turning on neckline 1100mm, length of neckline 340mm, speeds of 13-1000rpm, diameter of the hole of the shank 84mm, has mounted plate 3 claws diameter 315mm, has plate 4 independent claws of diameter 500mm, has fixed steady rests, lathe in general in good condition. Fodjwqz D Ejpfx Aa Sopr

Condition: good (used), Blacksmith vice, bottle vice, anvil vice, anvil, blacksmith anvil, bench vice, metalworke vice, parallel vice Fpodpfjdl E Irox Aa Sjr -Jaw width: 135 mm -Wingspan: 150 mm -Number: 9x vices available -Price: per piece -Dimensions: 450/160/H900 mm -Weight: 35 kg

Condition: used, Year of construction: 1968, faceplate diameter 1000 mm turning diameter over slide rest 1200 mm Fpedpjwhqzzsfx Aa Ssr centre distance 1500 mm bed indentation . weight of the machine ca. 6 t

Year of construction: 2001, condition: reconditioned (used), Nice Record Jaguar flow pack machine. Has come direct from a Bankrupt bakery where it was wrapping bread rolls at 66 pieces per minute. Complete with printer etc. Fpjdpjhg Uitofx Aa Sjr

Condition: excellent (used), Year of construction: 2016, Technical Data: Capacity: 4000 x 7 mm Minimum diameter: 550 mm Maximum diameter: 4000 mm Maximum sheet thickness (steel): 7 mm Maximum sheet thickness (stainless steel): 4 mm Maximum edge radius: 300 mm Minimum edge radius: 20 mm Maximum bottom diameter: 4000 mm Minimum bottom diameter: 300 mm Maximum total height of bottom including straight section: 640 mm Maximum diameter of torispherical ends: 3000 mm Minimum diameter of torispherical ends: 300 mm Maximum diameter of semi-elliptical heads: 1950 mm Minimum diameter of semi-elliptical heads: 300 mm CE marking Working height: 640 mm Motor power: 15 kW Weight: approx. 5.5 t Accessories: various tools Condition: Very good condition, little used Fpsdow Tq Siopfx Aa Sor The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are appropriate for its age; used machines are sold without any warranty.

Condition: ready for operation (used), Year of construction: 2018, 4-Axis CNC Vertical Lathe Brand: UMARO Model: SC27 Year: 2001 / 2018 (retrofitted) CNC: FANUC 0i Specifications: Turning capacities: Max. swing diameter: 2650 mm Max. turning diameter: 2600 mm Max. turning height: 1900 mm Table: Diameter: 2500 mm Max. load: 15 t Rotational speed (2 ranges): 1 to 112 rpm Main motor power: 75 / 60 kW Fodpew Add Eefx Aa Sopr Cross rail carriages: Vertical travel right carriage: 760 mm Vertical travel left carriage: 1200 mm Cross rail: Vertical travel: 1600 mm Dimensions (width x depth x height fully extended): 5 x 4.8 x 4.8 m Equipped with: Grinding spindle on left carriage Set of 4 jaws