Motorized three-roll plate bending machine

FASTI 108/20/4

Year of construction: 1991, condition: good (used), machine/vehicle number: 07282, Offer 22336 Technical data: - max. working width 3030 mm - max. sheet thickness without bending 4 mm - max. sheet thickness with bending 3 mm - 3 driven rolls - roll diameter top / bottom 205 / 185 mm - working speed m/min - drive - brake motor 400 V / 7,5 kW - space requirement approx. W 5500 x D 1400 x H 1300 mm - weight approx. 4,7 t - with - bending - Rear roller inclinable, - hinged bearing for swinging out the top roller - extended roller ends for mounting of profile rollers Ppsdomdqllspfx Agpol - right + left rotation - separate control panel

Condition: used, Year of construction: 1999, tube diameter bis 60 mm weight of the machine ca. 1,8 t Ppjdpfx Agovvnm Sjpol

Condition: good (used), Year of construction: 2025, machine/vehicle number: 9010003, Offer 24195 Ppodpfx Agjv Tx Hdspel Technical Specifications - Max. working width 2050 mm - Max. sheet thickness at 400 N/mm² without pre-bending: 4 mm - Roller diameter 115 mm - Drive 400 V / 4.5 kW - Handheld remote control - Space required approx. W 2800 x H 1250 x D 1150 mm - Weight approx. 2200 kg

Condition: new, Year of construction: 2025, Accurate and efficient industrial bending machine for bending steel, copper, aluminum and brass pipes. The ability to select the optimal bending radius allows for high-quality results without deforming the material. The presented bending machine is very easy to use. Pipe benders are devices used in individual and small-series production of parts in the automotive, furniture, architecture or garden tool industries. The main bending die is driven by a reduction gear, an electric motor. The device can work in two modes: manual and semi-automatic. The simple and durable design ensures long-term, trouble-free use and guarantees ease of use. Ppedpovugv Aefx Agpjl Standard equipment digital reading of the bending angle The BENDMASTER machine is equipped with dies for pipes with a diameter of: 38.1; 48.3; 70 mm Technical data MAXIMUM DIAMETER OF BENT PIPE 70x5 mm MAXIMUM DIMENSION OF BENT SQUARE PROFILE 50x50x2 mm MAXIMUM BENDING ANGLE 270° DIE ROTATIONAL SPEED DURING BENDING 1.2 rpm DIE ROTATIONAL SPEED DURING RETURN 2.4 rpm MAIN MOTOR POWER 5 kW EXTERNAL DIMENSIONS OF THE DEVICE 1300x700x900 mm WEIGHT 680 kg For more information, please contact us by phone or email. We invite you to familiarize yourself with the offer on our website.

Condition: used, Year of construction: 1975, machine/vehicle number: 4005, Order No. 24330 Ppjdpfxewhwz Ue Agpjl Technical Specifications: - Asymmetrical roller arrangement, tiltable lower roller - Folding bearing for sheet removal - Max. working width 2040 mm - Max. sheet thickness approx. 2.5 mm - Roller diameter 137 mm - Working speed right + left 6 m/min - Motorized feed of the rear roller - Rear roller stroke approx. 80 mm - Emergency stop foot switch - Roller drive 3.5 kW - Feed drive power 2 kW - Space requirement approx. W 3200 x H 980 x D 900 mm - Weight approx. 1.5 t

Condition: used, Year of construction: 2023, functionality: fully functional, Technical Details: Produces all shapes of Reinforcement steel Profiles Thickness 0.50-3 mm Bandwith max- 200 mm Production Speed: max. 15-20 mt/minute Width min- 22 mm max- 60 mm Depth min- 5 mm max- 60 mm Pjdpfx Aoxm Rq Rogpspl Square Shape Max: 50 mm x 50 mm Square Shape Min: 20 mm x 20 mm Loading capacity of decoiler is max. 1000 kg. Decoiler: • Decoiler is manual system with brake lining. • Bandwidth capacity 300 mm. • Max. Coil inside diameter 550 mm. • Max coil outside diameter 1500 mm. • Tightening roll hub by mechanical ROLLFORM MACHINE: The machine has 14 stations to bend sheet step by step. • Shafts and pulleys manufactured from high-quality materials (4140) according to the techniques and reach hardness of 50-55 HRC. • Shaft diameter: 52 mm. / Bearing brand: SKF • The drive gears in each pulley of the stations are made of blister steel (8620) and reach hardness of 50-55. • The reductor is used in a drive system. The main body consists of gearbox and two blocks. Spacers on the rollers can be changed manually according to the dimensions of the profiles. • There is calibrating machine that comes after the roll forming machine to get the required flatness, linearity and twist. • Reducer and helical gears will be used in drive system. • There will be 18,5 kW engine with reducer in the form unit. • Motor brand: GAMAK / Reducer brand: YILMAZ / ÖZTEKFEN / POLAT You can cut the profiles of any length you need by only entering the parameters to the control panel. • Production is unstoppable even during cutting. • Cutting is done with Flying Circular Saw. • The disc will be moved from down to up. • Length tolerance will be maximum +- 5 mm. • Saw motor will be 5,5 kW. SECOND CUTTING EQUIPMENT: You can cut the profiles of any length you need by only entering the parameters to the control panel. • Production is unstoppable even during cutting. • Only U profiles can be cut with the hydraulic guillotine. • Cutting is done with Hydraulic Guillotine. • Length tolerance will be maximum +-5 mm • The cutting mold material will be 2379 steel. • Hydraulic unit tank: 40 Liter. • Hydraulic unit motor: 3 kW • Hydraulic motor brand: GAMAK / ELK Hydraulic parts brand: TEK HİDROLİK STACKING TABLE: Stacking table will be with pneumatic discharge system and conveyor. • There will be 1 kW engine on the run-out table. CONTROL SYSTEM: All parts of the electrical panel are made of first quality materials. (SIEMENS, SCHNEIDER, ABB etc.) • Production line will use 380v +/-%10, and 3 phase 25 kW of electrıcity and compressor with capacity of 6 bar and 500 liters. • You can cut the profiles of any length you need by only entering the parameters to the control panel. The PLC parameters include “jog speed, production pieces, actual pieces, manual and automatic productions settings, calibrating setting vs.”. PACKING EQUIPMENT: • The production line includes 2 pieces packing machine for metal strips. • Manual packing machine can make locked to metal strips for profile package.

Condition: used, Year of construction: 2020, Manufacturer: Lechner Maschinenbau e.K. Type: 3100/110 Year of manufacture: 2020 Power supply: 3 phases, neutral, PE Voltage: 400 V Power consumption: 1.5 kW Upper roll diameter: 60 – 100 mm Maximum usable length: 1100 mm Ppedpjw Nhzysfx Agpjl Rated capacity: 3.2 mm (sheet thickness) Feed rate: 5 m/min Please submit inquiries only via email. All information provided to the best of our knowledge. Subject to error. This offer is directed exclusively to entrepreneurs as defined by § 14 BGB. The sale is made under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breaches of duty by the seller, or for any injury to life, body, or health. For further information, please visit the website of Witzenmann GmbH under the keywords 'Legal Notice', 'Terms and Conditions', and 'Data Protection'.