Pipe-Bending Machine

LANG unbekannt

Condition: used, Pressure: 200 t Length of stroke: 40-180mm Strokes by minute: 32 Up table size: 630x500mm Down table size: 900x800mm Technical characteristics: AIR CLUTCH Power: 15 HP DIMENSIONS: Ksdpj Dvi Ujfx Abnjww Height: 3000 mms Width: 1000 mms Length: 2750 mms Weight: 14000kgr New electric system

Year of construction: 1990, condition: good (used), Offer 20191 Year of manufacture approx. 1990, revision 2002 Technical data: - Bending capacity at 45 kg / mm² up to approx. Ø 25 x 3 mm Kwedpfx Abshrdmbenew - Bending angle left + right selectable - Hydr. double sided bending function - Hydr. infeed ° - Drive 400 V / 11 kW - Space requirement approx. W 1750 x H 2200 x D 2300 mm - Weight approx. 1600 kg - with - bending angle adjustment - Hydr. tension - bending tools

Condition: ready for operation (used), machine for expanding and reducing tubes 1 head no tooling included (can be supplied on demand) Stroke: 150 mm Power: 11 kW Dimensions: 2200 x 800 x 1200 mm Weight: 500 kg Kwsdpfx Abowrt Tuonsw

Condition: new, neu ca. 4 Wochen ab Auftragse Italien 3620 € 38 mm 245 mm 300 mm 320 mm 23 kg 19 cm³ 38 x 1,5 mm 38 x 1,5 mm 35 x 3 mm 30 x 2 mm 35 x 1,5 mm 42 x 1,5 mm 42 x 1,5 mm 50 x 2 mm 50 x 2 mm 50 x 4 mm 20 mm 10 x 25 mm 25 x 20 (stehend), 25 x 1 mm 180 mm 36 mm 10 mm 2,8 U/min 0.9 kW digital adjustment of the bending angle from 0 - 180 ° single phase motor 220V / 900W electric engine brake indicator light for indicating overload basement made of cast iron, suitable for mounting a tripod (tripod not included) 90° bend in 6 seconds foot pedal Kodpewiqxiefx Abnsww without tools OPTIONAL EQUIPMENT: tripod € 330,-

Condition: good (used), Year of construction: 1977, functionality: fully functional, throat depth: 440 mm, ram adjustment: 110 mm, total height: 18,200 mm, table width: 800 mm, table length: 1,100 mm, total width: 24,000 mm, total length: 37,200 mm, overall weight: 12,600 kg, pressing force: 200 t, distance table to ram: 400 mm, power: 15 kW (20.39 HP), ram stroke: 40-180 mm incl. Helmerding feed, 400 mm x 4 mm Strokes: 40 + 60 1/min Kjdpfx Ajtu Hvwsbneww Distance table/ram - adjustment top/stroke bottom: 400 mm Table opening: 450 mm diameter

Condition: used, Year of construction: 1962, nominal force 400 t stroke 140 - 400 mm no. of strokes 24 - 36 /min distance between columns 800 / 700 mm distance table/ram, max. stroke up, adjustment up 900 mm table surface area 700 x 700 mm ram surface 630 x 630 mm Kodpfx Aovuud Uebnsww spindle diameter 220 mm power capacity 26,0 kW weight 18,5 t Dimensions (WxDxH) 1,85 x 2,5 x 4,3 m only permitted for warm forming work with gear drive, single impact / double impact device, impact regulation

Condition: used, Year of construction: 1999, tube diameter 12-54 mm (Kupfer / Edels. mm serial number EBD mode of operation Schneiden/ Entgraden / Re Kwedpeumyhlefx Abnow speed Rollen 450 U/min m/min

Condition: used, Year of construction: 1976, pressure 100 t throat 315 mm stroke 8 - 112 mm table surface area 725 x 570 mm ram surface 410 x 315 mm ram adjustment 80 mm Kedpeugnpijfx Abnsww no. of strokes 55 / 82 Hub/min tool shank hole (depth x diameter) 85 x 50 mm dayligth 355 mm total power requirement 7,5 kW weight of the machine ca. 6 t dimensions of machine L x W x H 2,00 x 1,00 x 2,87 m

Condition: used, Year of construction: 2023, functionality: fully functional, Technical Details: Produces all shapes of Reinforcement steel Profiles Thickness 0.50-3 mm Bandwith max- 200 mm Production Speed: max. 15-20 mt/minute Width min- 22 mm max- 60 mm Depth min- 5 mm max- 60 mm Kwsdjxm Rq Rjpfx Abnow Square Shape Max: 50 mm x 50 mm Square Shape Min: 20 mm x 20 mm Loading capacity of decoiler is max. 1000 kg. Decoiler: • Decoiler is manual system with brake lining. • Bandwidth capacity 300 mm. • Max. Coil inside diameter 550 mm. • Max coil outside diameter 1500 mm. • Tightening roll hub by mechanical ROLLFORM MACHINE: The machine has 14 stations to bend sheet step by step. • Shafts and pulleys manufactured from high-quality materials (4140) according to the techniques and reach hardness of 50-55 HRC. • Shaft diameter: 52 mm. / Bearing brand: SKF • The drive gears in each pulley of the stations are made of blister steel (8620) and reach hardness of 50-55. • The reductor is used in a drive system. The main body consists of gearbox and two blocks. Spacers on the rollers can be changed manually according to the dimensions of the profiles. • There is calibrating machine that comes after the roll forming machine to get the required flatness, linearity and twist. • Reducer and helical gears will be used in drive system. • There will be 18,5 kW engine with reducer in the form unit. • Motor brand: GAMAK / Reducer brand: YILMAZ / ÖZTEKFEN / POLAT You can cut the profiles of any length you need by only entering the parameters to the control panel. • Production is unstoppable even during cutting. • Cutting is done with Flying Circular Saw. • The disc will be moved from down to up. • Length tolerance will be maximum +- 5 mm. • Saw motor will be 5,5 kW. SECOND CUTTING EQUIPMENT: You can cut the profiles of any length you need by only entering the parameters to the control panel. • Production is unstoppable even during cutting. • Only U profiles can be cut with the hydraulic guillotine. • Cutting is done with Hydraulic Guillotine. • Length tolerance will be maximum +-5 mm • The cutting mold material will be 2379 steel. • Hydraulic unit tank: 40 Liter. • Hydraulic unit motor: 3 kW • Hydraulic motor brand: GAMAK / ELK Hydraulic parts brand: TEK HİDROLİK STACKING TABLE: Stacking table will be with pneumatic discharge system and conveyor. • There will be 1 kW engine on the run-out table. CONTROL SYSTEM: All parts of the electrical panel are made of first quality materials. (SIEMENS, SCHNEIDER, ABB etc.) • Production line will use 380v +/-%10, and 3 phase 25 kW of electrıcity and compressor with capacity of 6 bar and 500 liters. • You can cut the profiles of any length you need by only entering the parameters to the control panel. The PLC parameters include “jog speed, production pieces, actual pieces, manual and automatic productions settings, calibrating setting vs.”. PACKING EQUIPMENT: • The production line includes 2 pieces packing machine for metal strips. • Manual packing machine can make locked to metal strips for profile package.

Condition: good (used), Year of construction: 2011, functionality: fully functional, Profile T93 Kwjdpfxexam N Nj Abnsw Entry width 1250 mm Material thickness 0.75 - 1.50 mm Year of manufacture 2011