HYDRAULIC PRESS

EXNER

Condition: used, Year of construction: 1970, functionality: fully functional, pressing force: 100 t, overall weight: 4,000 kg, pressure 40 t stroke 150 mm serial number 100091 2 Druck & Hub verstellbar pressure 25 t weight je 1,5 t Tsdpevxltbefx Aa Toc safety light frame ja bei beiden

Condition: new, Year of construction: 2026, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ Tsdpfx Ajfz Anpsa Tsc 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: used, Year of construction: 1972, Press force: 150 t Stroke: 180 mm Frame width: 300 mm Side frame opening: 180 mm Shut height (stroke up): 300 mm Table area: 570 x 410 mm Tjdpfx Aszymlqja Toc Table height above floor: 875 mm Ram area: 180 mm Downstroke speed: 250 mm/s Upstroke speed: 160 mm/s

Year of construction: 1995, condition: ready for operation (used), overall weight: 52,000 kg, total width: 5,100 mm, total height: 5,170 mm, pressing force: 204 t, product length (max.): 1,750 mm, table length: 800 mm, table width: 3,800 mm, Hydraulic press manufactured in 1995. This EXNER EX SBR 200 features a pressing force of 2000 kN and a drive power of 78 kW. With an oil capacity of 1400 liters and a weight of 52000 kg, this machine is designed for robust performance. If you are looking to get high-quality pressing capabilities, consider the EXNER EX SBR 200 hydraulic press we have for sale. Contact us for further details. - Pressing Force: 2000 kN- Drive Power: 78 kW- Overtravel Distance: 56 mm- Safety Distance: 235 mm- Overtravel Time: 147 ms- Max. Ram Stroke: 700 mm- Distance Between Columns: 3830 mm- Installation Height: 1200 mm- Ram Diameter: 240 mm- Number of Ram Cylinders: 2- Table Bed Depth: 800 mm- Table Bed Width: 3800 mm- Clamping Plate Thickness: 150 mm- T-Slots Configuration: 8 slots, 28 mm slot width, 650 mm spacing- Total Connected Load: 90 kVA- Total Power Requirement: 77.48 kW- Voltage: 400 V- Frequency: 50 Hz- Main Motor 1 (VEM 250 M4): 55 kW, 1475 rpm- Motor 2 (VEM 132M4): 7.5 kW, 1435 rpm- Motor 3 (VEM 100Lx4): 3 kW, 1430 rpm- Motor 4 (VEM 132S4): 5.5 kW, 1440 rpm- Motor 5 (VEM 132S4): 5.5 kW, 1440 rpm- Motor 6 (ZG1KMR63G4 VEM): 0.37 kW, 40 rpm- Oil Cooler Motor (Oiltec TB/33-6): 0.55 kW, 1000 rpm- Lubrication Pump Motor (Woerner GMA-B): 0.06 kW- Press Oil Tank Capacity: 1400 liters (ISO VG 46)- Hand Lubrication Pump Capacity: 1.5 liters (Shell Alvania EP2)- Motor Lubrication Pump Capacity: 2 liters Tedpszxz Spjfx Aa Tsc

Condition: refurbished (used), Year of construction: 2020, pressing force: 500 t, pressure:500 t passage width:1100 mm stroke:600 mm weight of the machine ca.:ca. 22,8 t Table area:1100 x 800 mm ram surface:1100 x 800 mm Daylight Opening:800 mm Hydraulic:300 bar closing speed:60-200 mm/sec pressing speed:0 - 9,5 mm/sec opening speed:28-200 mm/sec Table height above ground level:900 mm height over floor:5100 mm workpiece weight max.:2000 kg workpiece weight top:1000 kg halls height:min. 6500 mm Number of pressing cylinders:1 St. Tsdpfx Asffamvea Tec number of driving cylinders:2 St. :ca. 270 Lt./min. Oil Tank Capacity:600 l main drive:75 kW Control technology from Siemens:S 7 Safety control:PILZ Multi

Condition: used, Year of construction: 1985, pressure 40 t distance between columns 495 mm stroke 150 mm distance table/ram, max. stroke up, adjustment up 300 mm table surface area 490 x 400 mm hole in the table 50 mm table height over floor 950 mm side window 155 mm ram surface 150 mm speed down 200 mm/s Tjdpfx Aaszrptbo Toc speed up 200 mm/s working speed 20 mm/s oil volume 115 l power requirement 5,5 kW weight 2,2 t dimensions (WxDxH) 1,35 x 1,1 x 2,2 m with oil-hydraulic drive, upper and lower stroke limitation, mechanical depth stop, two-hand and foot operation

Condition: good (used), Year of construction: 1970, pressure 80 t passage width 350 mm stroke 600 mm Todpfx Aaevwgqrs Toc table dimension - longitudinal 400 mm dimensions of the machine ca. 1400 x 1050 x 2350 m

Year of construction: 2002, condition: good (used), functionality: fully functional, doubledeck screen box: 1.000 x 5.000 mm Tedpelxzkkefx Aa Tsc squared meshes on both screen decks E-motor 4 kW steel-construction and outlet chutes

Condition: used, Manufacturer: EXNER Type: EX 20 Maximum pressing force: 20 t Table size: 480 x 350 mm Maximum tool height: 230 mm Tsdpjxbf Ndsfx Aa Tjc

Condition: used, Year of construction: 1986, functionality: fully functional, pressing force: 150 t, total length: 1,690 mm, total width: 1,440 mm, total height: 2,800 mm, No minimum price – guaranteed sale to the highest bidder! Tedpfx Aszk A Ucea Tsc TECHNICAL DETAILS Pressing force: 150 t Oil volume: 480 l Aftertravel: 30 mm Safety distance: 180 mm MACHINE DETAILS Total power requirement: 18.5 kW Dimensions & Weight Dimensions: 1440 x 1690 x 2800 mm Machine weight: approx. 4200 kg

Year of construction: 2009, condition: good (used), hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Pressure force: at 250 bar 96 to -Piston diameter: 220 mm -Piston rod: Ø 125 mm -Cylinder tube outside: Ø 260 mm -stroke: 495 mm -Total length retracted center hole: 1195 mm -Piston rod mount: Ø 100 mm -Cylinder mount: Ø 100 mm Tjdsdq U S Ispfx Aa Tjc -universally applicable: -Number: 15x cylinders available -Price: per piece -Dimensions: 1360/530/H300 mm -Weight: 364 kg/piece

Condition: used, Year of construction: 1971, pressure 200 t passage width NA mm stroke 180 mm table length 690 mm table width 530 mm distance between columns 420 mm total power requirement 18 kW weight of the machine ca. t dimensions of the machine ca. m Tedpfx Aajt Hw Dwj Tjc Hydr. 4-Pillar Press for Embossing/Calibration

Condition: used, Year of construction: 1987, machine/vehicle number: 10064, functionality: fully functional, operating hours: 90,041 h, input voltage: 380 V, type of input current: three-phase, pressing force: 200 t, stroke length: 300 mm, table width: 800 mm, table length: 1,290 mm, table height: 1,000 mm, ram plate width: 800 mm, ram plate length: 1,300 mm, oil tank capacity: 1,300 l, total length: 2,330 mm, total width: 1,600 mm, total height: 4,150 mm, overall weight: 21,000 kg, control cabinet height: 2,070 mm, control cabinet length: 1,500 mm, control cabinet width: 400 mm, DGUV certified until: 06/2026, die cushion stroke: 70 mm, distance between side stands: 420 mm, installation height: 600 mm, Equipment: safety light barrier, 1x tool safety input Two-hand control panel with emergency stop 8x hydraulic clamps Electrically adjustable depth stop Tjdpoyvgrhjfx Aa Tsc Cut stroke damping Ejector - draw cushion for ram and press table Electronic stroke and pressure measurement system Hydraulic main drive pump completely overhauled with a new drive motor

Condition: ready for operation (used), machine/vehicle number: YC-67958, Max. operating pressure: 210 bar Drive motor: 380 V, 11/13.2 kW Oil tank: 500 x 900 x 600 mm (height) Oil tank capacity: 250 l Tjdpfx Aajd Efdyj Tjc Space requirement: 1150 x 700 x 1070 mm (height)

Condition: used, Year of construction: 1976, pressure 20 t throat 185 mm stroke 100 mm table surface area 380 x 350 mm Tjdpfxotqqwus Aa Tec dayligth 250 mm table height over floor 840 mm total power requirement 4 kW weight of the machine ca. 1,3 t