Jig

Exeron EDM314MF30

Condition: used, Year of construction: 2012, operating hours: 5,150 h, functionality: fully functional, travel distance X-axis: 905 mm, travel distance Y-axis: 705 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 3,000 kg, total height: 3,400 mm, total width: 2,100 mm, total length: 3,425 mm, table width: 850 mm, quill stroke: 710 mm, type of input current: three-phase, distance table to quill: 250 mm, table length: 1,150 mm, warranty duration: 6 months, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 15 m/min, input voltage: 400 V, overall weight: 7,500 kg, year of last overhaul: 2026, table load: 3,000 kg, input frequency: 50 Hz, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 15 m/min, Equipment: documentation/manual, EDM314MF30 Operating Interface MF30 Year of Manufacture: 2012 Operating Hours: 5,150h General Overhaul Gjdpfx Aoyt Ewgsa Ejbl Travel Paths XxYxZ: 905/1020 x 705 x 455 mm Working Table: 1150 x 850 mm (steel table with T-slots) Work Tank: 1200 x 900 mm Fill Height of Work Tank: 500 mm Maximum Electrode Weight: 50/500 kg Workpiece Weight: 3,000 kg Machine Weight: 7,500 kg Machine Dimensions (W x D x H): 2,100 x 3,425 x 3,450 mm Equipment: Color: Silver metallic 30-position Tool Changer Cartridge Filter System Quick-Change Chuck EROWA ITS C-Axis 100 rpm, direct measurement 0.0001° Holding Brake on C-Axis CO² Fire Extinguishing System K&B Fire Protection Flap Fume Extraction with Activated Carbon Filter Integrated Cooling Unit Handheld Control Panel Automatic Tank Level Adjustment External Programming Station EDM Generator 60A Option: With Booster Stage 120A Erosion Power Transport On-site Commissioning Training

Condition: used, Year of construction: 2015, x-travel 635 mm Gedpfx Aaswm Rtbj Eebl y-travel 510 mm z-travel 460 mm Control DMG

Condition: excellent (used), bore depth 500 mm Godpfexx A D Tsx Aa Eebl spindle speed: 1

Condition: ready for operation (used), Year of construction: 2009, Travel X/Y/Z: 450mm/580mm/400mm, swivel range A/B: -110°/+10°, rotation range C: 360°, table dimensions X/Y: 400mm/400mm, tool positions: 30, tool holder: HSK-E50, spindle speed: 42000rpm, max. workpiece weight: 200kg, feed: 80m/min, max. tool length/diameter: 250mm/80mm. Machine dimensions X/Y/Z: approx. 3250mm/2950mm/2900mm, weight: approx. 9500kg, control: Heidenhain iTNC530. Documentation available. An on-site inspection is possible. The machine is located in China. Gbsdpfx Asxf Ii Uoa Esl

Condition: used, Year of construction: 2015, control Grind-X weight of the machine ca. 2900 kg Godpsyiu Sxefx Aa Esbl

Condition: excellent (used), Year of construction: 2012, bore capacity in steel (diameter) 62 mm arm length 350-1600 mm workpiece height max. 1250 mm distance spindle nose and table 350-1250 mm Boring depth max. 315 mm machine table 2400 x 1000 x 200 mm Turning speeds of the bor. spindle 38 - 2000 U / min spindle taper MT5 feed 0,06 - 1,00 mm/U engine output 4 kW stroke drive 1,5 kW oil pump 0,75 kW total power requirement 6 kW weight of the machine ca. 3,8 t Gbedpfxsyhq T Nj Aa Esl dimensions of the machine ca. 2490 x 1050 x 2780 mm Steps of spindle speed: step-less Steps of spindle feed: 8 Speed of the arm up and down: 1.2 m/min Arm moving angle: ±180 degree Spindle moving distance of each dial revolution: 122 mm Max. spindle torque: 400 Nm Max. spindle feed resistance: 16000 N

Condition: excellent (used), FANUC Power Mate control Gbsdpoyla Nuofx Aa Esl Grinding range 800 x 400 mm Wheel diameter / width / bore 250/ 50 / 127 mm Magnetic plate 800 x 350 mm Misc. accessories MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 2018, machine/vehicle number: ZA-12080, Offer 25498 Technical Specifications: - Drilling capacity: 50 mm - Tapping unit up to: M 40 mm - Tool holder: MT 5 - Spindle stroke: 280 mm - Spindle speeds: 38 – 2,000 rpm - 6 feed rates: 0.08 – 0.83 mm/rev - Drive: 400 V / 5.5 kW Gbodpfx Asyf A A Rsa Ejl - Throat depth min. / max.: 350 / 1,400 mm - Distance spindle to machined base plates min. / max.: 350 / 1,250 mm - Machined base plate with T-slots: W 1,650 x D 930 mm - Electric central clamping - Coolant system + lighting - Cube table - Required space approx.: W 2,300 x H 2,400 x D 1,050 mm - Weight approx.: 3,500 kg

Condition: refurbished (used), functionality: fully functional, grinding length: 680 mm, grinding width: 350 mm, grinding height: 300 mm, table length: 600 mm, table width: 300 mm, grinding wheel width: 50 mm, spindle speed (max.): 1,400 rpm, CAPACITY Max. longitudinal table travel: mm 680 Max. cross travel of grinding wheel: mm 300 Max. grinding width: mm 350 Max. grinding height with standard wheel: mm 300 TABLE Table surface dimensions: mm 600 x 300 Length of T-slots: mm 850 Size and center distance of the three T-slots: mm 16 x 100 Continuously variable speed: m/min 2 – 30 GRINDING WHEEL Standard dimensions (diameter x bore): mm 356 x 127 Standard width: mm 50 Max. permissible width: mm 76 Max. external diameter – upon request: mm 406 Speed with 50 Hz motor: rpm 1,400 Gsdpfx Asymlcvoa Eobl Incremental cross feeds: mm 1 – 10 Continuously variable cross movements: m/min 0.1 – 6 Automatic vertical feeds – upon request: mm/min 0.005 – 0.05 MOTORS, three-phase AC – 50 Hz: Grinding wheel rotation, 4 poles: kW (HP) 5.5 (7.5) Hydraulic unit, 2 poles: kW 2.2 (3) Rapid vertical movements, 4 poles – upon request: kW 0.37 (0.5) Coolant unit, 2 poles: kW 0.22 (0.3) MISCELLANEOUS Overall floor dimensions, machine in operation: mm 2780 x 1240 Height from floor, standard machine: mm 1960 Machine height with raised column – upon request: mm 2110 Approx. net weight: kg 2,500

Condition: like new (used), Year of construction: 2001, Set of clamping cones SK 50 - like new. Hardly used. Gbjdpfx Ajxnldzsa Eel