Wide belt sander

ERNST EM 5 / 1400

Condition: used, Year of construction: 2007, working width 1380 mm workpiece height 70 mm total power requirement 45 kW weight of the machine ca. 5.500 kg Kjdjt Hw Iiepfx Aaxswt

Condition: excellent (used), Year of construction: 2003, working width: 215 mm, welding power (max.): 750 kVA, Complete Mesh welding/Lattice girder factory Factory consists : - Mesh welding line SCHLATTER PG 24 , Semi- automatic , Year - 2002 - Lattice Girder Line SMEI , Full automatic , Year - 2003 - Straightening and cutting machines 1x Wafios R4 Kwjdpfx Aaeqy Ek Aexjt 2 x VITARI NR16 1X VITARI NR10 - Cold drawing line SMEI , Input wire max.10mm, Speed - 4m/sec. - But welding achine SMEI - Wire sharpener SMEI

Condition: refurbished (used), SCHLATTER Welded wire mesh production line MG24 Full revamped WORKING RANGE Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24 WELDING MESH MACHINE MG 24.1/8C, Basic equipment including: - 1 Machine frame - 1 Upper support for press reception, continuously adjustable by hand crank - 1 Magnet supports with retaining magnets and weft wire monitoring. - 1 Row of pneumatic solenoid valves for press actuation. - 1 Installation for air and water. - 2 Pneumatic rotary drives with oil damping - Static motor torque with 5 bar compressed air: 480 Nm - Front continuously adjustable from: 25 - 250 mm adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION 8 Type C Transformers Rated power of each transformer: 100 kVA No-load secondary voltage: 7.1 V Rated secondary current: 14 kA 8 Thyristor contactors ES 130 12 Welding presses: 5.0 kN 12 Chain current bridge for spacing of warp wires: 50-100 mm 12 Chain current bridge for spacing of warp wires (for offset warp wires): 100 mm 10 Chain current bridge for spacing of warp wires: 100-150 mm 8 Chain current bridge for spacing of warp wires (for offset warp wires): 150 mm 6 Chain current bridge for spacing of warp wires: 150 - 200 mm Kwodewu Tu Depfx Aaxot 6 Chain current bridge for spacing of warp wires (for offset warp wires): 200 mm 24 Lower electrode holders Cu with standard angled electrodes and each with a water-cooled current cable, width: 58 mm 24 Wire clamping pliers Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24

Year of construction: 2009, condition: new, belt dimensions 2000x100mm Belt speed 30m/sec Angle adjustable from 30 to 90 Power 3kW 4000V50Hz Weight 200kg Ksdox Davopfx Aaxswt Rollers for grinding rye 3/4";1/2"; 1"; 11/4"

Condition: excellent (used), Year of construction: 2007, COMPLETE mesh welding plant Plant consist of - 1. Mesh welding line SCHLATTER model MG-230 Min/Max wire diam - 3,5 - 14,00 mm Max width of mesh - 2.500mm Ksdowr Tk Hspfx Aaxswt Line and Cross wire feeding - from precut wires / bars Construction year - 2007 2. COMBINED rolling/ribering/straightening/cutting line Line is COMBO - wire rolling/ribering/straightening/cutting Construction year - 2023. 3. Straight and cut machine WAFIOS model R-41-L Min/Max wire diam - 3,00 - 10,00 mm Max cutting length - 10.000 mm Construction year - 1990. Please contact us for more details. VIDEOS AVAILABLE upon request.

Year of construction: 1999, condition: used, Lattice girder line PITTINI IMPIANTI (Italy) Brand name – Pittini Impianti ( made in Italy) Built year – 1999. Still installed, under power, production stoped 5 years ago. Min – Max UPPER longitudinal wire diam. - 5,00 – 12,00 mm Min – Max LOWER (2 wires) longitudinal wire diam. - 4,20 – 12,00 mm Min – Max Fret(zig-zag) wire diameter – 3,60 – 8,00 mm Min – Max lattice girder height – 90 – 250 mm Lattice girder base width – 100 mm Lattice girder pitch – 200 mm Min - Max. Cutting length (run-out table) – min. 3,60 m - max 12 meters. Min. Cutting length – 200 mm Max speed (capacity) – 24 meters per minute Kwjdpfx Aaeikvg Nsxet Power – 380 V , 50 Hz Total installed power – 85 kW

Condition: new, Year of construction: 2024, lifter boy for loading sheet metal on laser machines easy operation ( vacuum pump are in the control unit) no cable by loading laser machine vacuum pomp work on battery and they are in operation unit battery loader included. 300, 600 and 800 kg save operation include battery loader include mounting manual. CE Kedpfxjlcd Sdj Aaxowt complete pack in wooden transport box we can deliver till 6 meter long scheetmetal.

Condition: excellent (used), Year of construction: 1992, Manufacturer EVG Type TSD 7-25 Machine No. 958 Year of manufacture 1993 Working direction L > R Beam types KT 8… Beam height (mm) 90-250 Carrier length min. (mm) max. (mm) 14,000 Ksdpfxewp Ilye Aaxjwt Fixed lengths: Yes Cutting pitch (mm) 100/200 Spool unwinder (pcs.) 5 LAR: Yes Wire diameter - 5-12 mm smooth/ribbed Diagonal - 4-7 mm smooth / ribbed Stack height max. (mm) - 500

Condition: used, Year of construction: 1983, Used machine Year of manufacture: 1983 Condition: fully checked and serviced, including a new feed belt Features and technical specifications: - Including combination unit with contact roller and sanding shoe - With height-adjustable contact roller for calibration - With workpiece-controlled air cushion pressure shoe - 4-way adjustable grit compensation - With pneumatic belt tensioning device - With a rotating cleaning brush at the outfeed side of the machine - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Pass-through height: 150 mm Kedpfx Aaswka T Ssxowt - Main motor: 15 kW - Continuously adjustable feed speed, 2.5 - 12.5 m/min - With roller table at the infeed - With digital display for the electrically driven workpiece thickness adjustment - Extraction ports: 2 x 200 mm Dimensions: approx. 2300 x 2000 x 2300 mm Weight: approx. 2300 kg Images show the machine in unrefurbished condition! Availability: approx. end of January 2026 Location: Röllbach

Condition: as good as new (ex-display), Year of construction: 2021, Because of CANCELLED PROJECT of the construction of a nuclear power plant, we are able to offer you.... NEVER USED - complete metal forming / processing plant (about 80 machines) Ksdpjvlimlefx Aaxjwt Please contact us for full machinery list and more photos. Thank you!