Injection molding machine

ENGEL

Condition: ready for operation (used), Year of construction: 2004, operating hours: 70,029 h, functionality: fully functional, machine/vehicle number: 51561, clamping force: 2,300 kN, screw diameter: 135 mm, injection pressure: 1,600 bar, opening stroke: 3,800 mm, tool height: 1,890 mm, TECHNICAL DETAILS Clamping force: 2,300 kN Platen size (H x V): 2,900 x 2,500 mm Tie bar distance (H x V): 2,000 x 1,600 mm Minimum/maximum mould height: 700 mm/1,890 mm Maximum opening stroke: 3,800 mm INJECTION UNIT Screw diameter: 135 mm Shot volume: 8,870 cm³ Shot weight (PS): 8,071 g Injection pressure: 1,600 bar MACHINE DETAILS Nodpjy T Hx Hsfx Aa Eolb Net weight (with control cabinet): 113 t + 18 t Operating hours: 70,029 h

Condition: ready for operation (used), Year of construction: 2011, operating hours: 61,666 h, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 90 mm, column diameter: 175 mm, injection weight: 2,520 g, opening stroke: 1,400 mm, The machine is in excellent condition; all hydraulic hoses were replaced in the fourth quarter of 2024! TECHNICAL DETAILS Clamping force: 6,500 kN Column spacing (H x V): 1,100 x 960 mm Platen size (H x V): 1,510 x 1,440 mm Tool height (min./max.): 650 / 1,150 mm Opening stroke: 1,400 mm Maximum distance between platens: 2,050 mm Maximum tool weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Column diameter: 175 mm Injection unit (unit 5550) Screw diameter: 90 mm Maximum shot volume: 2,740 cm³ Maximum shot weight (PS): 2,520 g Injection pressure (max./increased): 2,180 bar Injection pressure (standard): 1,910 bar L/D ratio of the screw: 20 Screw stroke: 430 mm Maximum screw speed: 148 rpm Plasticizing volume: 77 g/s Nozzle closing force: 150 kN Nljdey T Hfyspfx Aa Eeb MACHINE DETAILS Control: CC200 Drive and Supply Installed drive power: 90 kW Cylinder heating power: 56 kW Number of heating zones: 6 Hydraulic tank capacity: 1,000 l Installed drive power: 90 kW Operating hours: 61,606 h EQUIPMENT Robot: Viper 40 Key features: 6 hydraulic circuits on the moving platen 2 hydraulic circuits on the fixed platen Cascade valves: 4 units (mounted on the fixed platen)

Condition: good (used), Year of construction: 2007, Clamping force: 1000 t Nlsdpfx Aasy Ukfmj Eob Screw diameter: 105 mm Distance between tie bars V: 1150 mm Distance between tie bars H: 1400 mm Shot volume: 4160 cm3 Type: Horizontal Drive: Hydraulic KUKA ROBOT 6 axes

Condition: excellent (used), Year of construction: 2011, Clamping force: 650 t Screw diameter: 90 mm Distance between tie bars V: 960 mm Nlsdpfey Uffhjx Aa Esb Distance between tie bars H: 1100 mm Shot volume: 2740 cm3 Type: Horizontal Drive: Hydraulic VIPER 40 Linear robot available The machine has approximately 61,600 operating hours. 6 core pulls on the moving platen, 2 cores and 4 cascade valves on the fixed platen.

Condition: excellent (used), Year of construction: 2016, clamping force: 4,500 kN, Clamping force: 450 t Screw diameter: 55 mm / 35 mm Distance between tie bars V: 830 mm Distance between tie bars H: 910 mm Shot volume: 295 cm3 Type: Multicomponent Drive: Hydraulic \+ robot Wittmann \+ rotary table Nledpfjy Ufd Rox Aa Ejb

Condition: excellent (used), Year of construction: 2015, ENGEL victory 650/120 tech (25.109 h) (S&P 3793) Manufacture year: 2015 Operating hours: 25,109 Stunden Screw: 35 mm Injection pressure: 2400 bar Stroke volume: 192 cm³ Clamping Force: 120 t Tie bar distance: 740 x 680 mm Mould installation height min.: 300 mm Plate distance max.: 800 mm Dimensions: 5100 x 1500 x 2350 mm Eeight: 7000 kg Nlsdpfx Aaoy Uka Do Ejb Connected load: 22 kW Automatic door, Corepuller 1x, Airvalve, Hotrunner, price when new 122.000,- € etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2007, clamping force: 2,000 kN, screw diameter: 55 mm, displacement volume: 618 cm³, injection pressure: 2,183 bar, injection weight: 562 g, mold height (min.): 400 mm, ejector stroke: 180 mm, Engel VC 1350/200 Tech Nsdpey Ui Nqofx Aa Eelb Clamping force: 200 tons Year of manufacture: 2007 Weight: 14,200 kg Dimensions (L x W x H): 6.3 x 1.9 x 2.3 m Injection unit: .../1350 Screw diameter: 55 mm Injection volume: 618 cm³ Shot weight (for PS): 562 g Specific injection pressure: 2,183 bar Mould clamping system: 200/... Mould platen dimensions: 860 x 570 mm Mould installation height: 400 mm Opening stroke: 750 mm Maximum platen distance: 1,150 mm Ejector stroke: 180 mm Ejector force: 80 kN Equipment: - 2 × hydraulic core on moving platen - Pneumatic valve - 8 hot runner zones - 8-section rotameter

Condition: excellent (used), Year of construction: 2007, operating hours: 102,000 h, clamping force: 6,500 kN, DUO 5550/650 Advanced Year 2007 Clamping force: 6500 kN Screw: D90, S6, tempered, with flight armouring and ionitriding, abrasion resistant Control unit: CC200 A01 Languages: Slovenian (SL), German (DE) Operating hours: 102,000 1x core mowing platen 1x core pull, additional, on movable platen Mold height increase of 200 mm Variant C, according to the technical sales manual (Min. mold height remains standard, max. mold height increases, platen stroke remains standard, max. platen distance remains standard) Connections for external filter station 8x mold heating control Expansion module for 8 temperature measuring or control points Standard 8-way cooling water flow regulator (0-10 l/min) Cooling water flow regulator, 10-way Magnetic mold clamping platen system TECNOMAGNETE, temperature resistant up to 120 degrees C, incl. interface Euromap 70.1, nozzle adaptation and assembly Nlodpfx Aoy Ug Ahsa Eeb ENGEL ROBOTER TYPE ERC 63-F X-Max. travel distance: 100 mm Total Y-axis length: 900 + 900 mm (tandem) Z-total: 2360 mm C-axis (125 Nm) 2 switchable vacuum/compressed air circuits RC 200 integrated with C30 E handheld control unit

Condition: excellent (used), Year of construction: 2012, Engel e-victory 200/80 with Engel Viper 12 Robot / Electric Machine / Operating hours: approx. h in automatic mode Year of manufacture: 2012 Injection Unit: Screw diameter: 30 mm Shot weight: approx. 71 g Injection pressure: 2400 bar Dosage volume: 85 ccm Clamping Unit: Clamping force: 80 t Tie bar spacing: 0x0 mm Platen size: 670x600 mm Ejector: electric Clamping unit: hydraulic Control system: CC 200 – touchscreen Additional equipment: Production line with Engel Viper 12 Machine is in very good technical condition Electric machine: energy-efficient and very quiet Operating hours: approx. in automatic mode Air valve x 4 Hydraulic core pull x 1 Controller with 12 hot runner zones Injection unit is wear-resistant and corrosion-resistant Main drive motor – servo motor with inverter – energy-saving Proportional valve on injection unit – precise injection Kistler sensor – mold pressure regulation Parallel movements Nodpfx Aajy Smmbs Eslb Engel Viper 12 Robot Year of manufacture: 2012 5-axis robot: 3 axes driven by servomotors (electric): X, Y, Z; B-axis pneumatic and C-axis Touch control panel Robot safety package Robot with adapter, conveyor belt and safety enclosure Purchase of robot and conveyor at extra charge Dimensions: Weight: 5500 kg Length/Width/Height: 4.40x1.40x2.00 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, Engel Victory 500/80 Tech / Production Line with Engel Viper 12 Robot Year of manufacture: 2011 Injection Unit: Screw diameter: 45 mm Shot weight: approx. 295 g Injection pressure: 1,598 bar Dosage volume: 318 cc Clamping Unit: Clamping force: 80 t Tie bar spacing: 0x0 mm Platen size: 670x600 mm Nedpfx Ajy Sml Rsa Ejlb Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 - touchscreen Additional equipment: Tie-bar-less machine Euromap 67 Robot interface 3x hydraulic core pull Injection unit hardened - bimetallic Robot Engel Viper 12 Year of manufacture: 2014 5-axis robot: 4 axes driven by servo motors (electric); Axis A - pneumatic Touch control panel Robot with adapter and protective housing with part separator Robot available for purchase at additional cost Dimensions: Weight: 5,300 kg Length/Width/Height: 4.57x1.48x2.38 m Drive: Pump/motor: 15 kW All offered machines are started up and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or participate in live technical tests at our facility in Łódź. Price: On request