Surface grinders ELB SWBDE 12 SA 1998

ELB-Schliff

Condition: used, Year of construction: 1991, Technical details: grinding length: 600 mm grinding width: 375 mm workpiece height: 375 mm max. table load: 300 kg grinding range: 350 - 600 mm Table dimensions: 900 - 350 mm Gbjdpfx Asxu D Huea Eol magnetic plate size: 600 x 350 mm dimensions of grinding wheel: 300 x 50 x76,2 mm mm total power requirement: 12 kW weight of the machine ca.: 5,2 t dimension machine xH: 3,3 x 2,6 x 2,4 m dimension coolant device LxWxH: 0,8 x 0,8 x 0,8 m -Longitudinal table stroke = 700mm -transverse travel of table = 800mm Coolant pump *

Condition: used, Year of construction: 1977, functionality: not functional, machine/vehicle number: 145240377, grinding length: 650 mm, grinding width: 350 mm, total height: 2,350 mm, total length: 2,800 mm, total width: 1,800 mm, table load: 300 kg, type of input current: three-phase, overall weight: 2,800 kg, input voltage: 380 V, space requirement height: 2,350 mm, Equipment: documentation/manual, We are offering this used ELB-Schliff Orion635 VA I-Z (SW 4/5) surface grinding machine, year of manufacture 1977. Gjdpfx Aaoy Nhxyo Eobl Operating voltage: 3×380 V Frequency: 50 Hz Direct current: 215 A Rated current: 15 A Fuse: 16 A Control voltage: 220 V DC voltage: 110 V If you have any questions or need more information, feel free to send us a message or call us.

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, grinding length: 800 mm, grinding width: 400 mm, grinding height: 400 mm, grinding wheel diameter: 300 mm, table load: 400 kg, grinding wheel width: 50 mm, overall weight: 4,800 kg, ELB Perfekt 8 SPS, year of manufacture 1998, grinding area 800 x 400 mm, grinding wheel 300 x 50 mm, 4.3 kW spindle power, SPS control for automatic grinding cycle (roughing, finishing, sparking out, lifting), dresser mounted on spindle head with compensation. The machine is currently being overhauled by us: the grinding spindle is being newly fitted with bearings, the guideways are being hand-scraped. After the overhaul, the machine will meet the geometry of a new machine and is thus immediately ready for operation. Accessories: electro-permanent magnetic chuck 800 x 400 mm, water tank with automatic paper filter, partial enclosure. All functions are tested, and the machine can be demonstrated under power at our facility. We are also happy to handle installation and on-site training. Financing/leasing is no problem; we’d be happy to provide an offer! Godpfxsrpz Evo Aa Esbl

Condition: good (used), Year of construction: 2003, ELB Rotary 40 NC-K rotary table surface grinding machine, table diameter 400 mm, grinding height 300 mm, year of manufacture 2003, ELN NC-K control, spindle power 4 kW, grinding wheel 300 x 50 x 76.2 mm, rotary table with magnetic chuck diameter 400 mm, full enclosure, coolant system with paper band filter, can be inspected under power, we are happy to take care of installation / training and subsequent on-site service! Financing/leasing is no problem, we are happy to provide an offer! Gbjdouiafuspfx Aa Eol

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, grinding length: 600 mm, grinding width: 400 mm, grinding height: 400 mm, grinding wheel diameter: 300 mm, table load: 400 kg, grinding wheel width: 50 mm, overall weight: 3,600 kg, ELB Perfekt 6, year of manufacture 2002, grinding area 600 x 400 mm, grinding wheel 300 x 50 mm, 4 kW spindle power, automatic grinding cycle, roughing, finishing, spark-out, lifting, dresser mounted on spindle head with compensation. The machine has been professionally overhauled by us and now meets the geometry of a new machine. The grinding spindle has new bearings. Accessories: electro-permanent magnetic clamping plate 600 x 400 mm, water tank with paper filter unit. All functions have been tested and the machine can be demonstrated under power at our facility. We are also happy to handle on-site installation and training, as well as future servicing. Financing/leasing is available; we will be pleased to provide an offer! Godpjxdalfsfx Aa Esbl

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, grinding length: 500 mm, grinding width: 400 mm, ELB Smart Line S 5 STC, year of manufacture 2008, grinding area X/Y/Z: 500mm/400mm/475mm, grinding wheel dimensions: 300mm/50mm/76.2mm, table speed up to: 30m/min, max. table load: 400kg, spindle taper: 36mm, control: Siemens STC, magnetic chuck 500 x 250 mm (can be enlarged), incl. coolant tank with paper filter system, grinding spindle with new bearings, all functions checked, in very good condition. The machine can be inspected under power at our facility; test grinding is also possible. We are happy to handle installation/training at your site as well as ongoing service in the future. Gsdpfx Aor D R I Soa Eobl

Condition: good (used), Year of construction: 1990, functionality: fully functional, grinding length: 600 mm, grinding width: 375 mm, total height: 375 mm, Surface grinding machine (226600) ELB SWN 6 NC-K; SN: 196900887, Magnetic clamping table, 350 x 600 mm, travel X/Y/Z 600 x 375 x 375 mm, Maximum table load 300 kg, grinding wheel Ø 300/76.2 mm, recess on both sides, dressing device, Lach diamond, missing grain, dresser, type MK0, maximum speed range Gedpfx Aaoy H Hhno Ejbl 3,000 rpm, power 3.7/4.5 kW, machine weight 3,500 kg, footprint L/W/H 2,750 x 2,250 x 2,400 mm, out of service

Condition: excellent (used), Year of construction: 1986, grinding length 800 mm grinding width 375 mm workpiece height 375 mm Gedount Iuopfx Aa Ejbl magnetic clamping plate, electical 900 x 300 mm spindle turning speed range 1500 - 3000 U/min table surface area 1550 x 370 mm table longitudinal travel 100 - 1000 mm max. workpiece weight 350 kg dimensions of grinding wheel 300 x 50 mm total power requirement 9 kW weight of the machine ca. 4,6 t dimensions of the machine ca. 4,0 x 2,3 x 2,6 m

Condition: used, Year of construction: 1996, grinding length 1.000 mm grinding width 550 mm workpiece height 400 mm table surface area 1.580 x 550 mm table load capacity 950 kg magnetic clamping plate 1.000 x 550 mm x-Travel 1.200 mm Gbjdpfoxx A Dmsx Aa Eel table feed 1 - 30 m/min vertical feeds: 1 - 300 mm/min z-axis 470 mm cross feed 1 - 2.000 mm/min dimensions of grinding wheel 400 x 100 x 127 mm grinding wheel speeds 1.500 - 3.500 U/min grinding spindle drive 11,00 kW total power requirement 23,00 kW weight of the machine ca. 7,50 t dimensions of the machine ca. 4,50 x 3,20 x H2,90 m Coolant system with coolant pump integrated in the hydraulic tank, exhauster.

Condition: ready for operation (used), ELB SWN 5 VA II Horizontal Surface Grinding Machine - Grinding area X/Y/Z: 525x375x255 mm - Magnetic chuck: 700x300 mm - Table clamping area: 900x250 mm - Table longitudinal stroke: 10-625 mm - Maximum table load: 280 kg - Table feed: 1-30 m/min - Reciprocating grinding: 3-30 m/min - Distance from table to spindle center: 525 mm - Vertical feed rate: 2-180 mm/min - Adjustable infeed: 0.001-2 mm - Grinding wheel speed: 3000 rpm - Coolant system Gedpfx Aaey Dcpce Eobl - Machine feet - Documentation - Complete technical data – see photos Dimensions (LxWxH): 2.7x2.2x2 m / Weight: 3500 kg Subject to errors and input mistakes