Eccentric press 35 tons

Edelhoff EP4

Condition: used, Year of construction: 1988, Pressure 063 t throat 250 mm stroke 10 - 100 mm no. of strokes 120 /min distance table/ram, max. stroke up, adjustment up 380 mm table surface area 700 x 500 mm hole in the table 180 x 140 mm table height over floor 700 mm ram surface 360 x 275 mm ram adjustment 60 mm power requirement 5,5 kW weight 3,8 t Dimensions (WxDxH) 1,9 x 1,7 x 2,4 m permitted for manual loading according to the German Safety Regulations (UVV) with hydraulic clutch/brake combination, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual central lubrication, two-hand and foot operation Dq0Ikt can be inspected in running condition in our warehouse

Condition: good (used), Year of construction: 1984, Power: 800 kN Frequency: 30 - 200 rpm, adjustable by PIV gearing Stroke, adjustable: 20 - 100 mm Daylight: 500mm (max. stroke up) Ram adjustement: 75mm Size of bolster: 1.010 x 800mm Bfgm8Xm0 Opening in bolster: 700 x 150mm Ram area: 860 x 700mm Motor power: 22 kW equipped by: - 8pc. guideways - hydraulic overload - motorized oil lubrication - motorized ram adjustment - electro pneumatic stroke adjustment with complete decoiling line make ALBA, consisting of: Decoiler Outer diameter max. 1.400mm equipped by: • Decoiler moveable hydraulic • hydraulic coil loading device • hydraulic drive • hydraulic expansion 480 - 530mm • hydraulic pressure arm, lateral adjustable by handwheel • lateral arms Straightener Type: Ma Ria 9 Width: max. 400mm Thickness: 0,5 - 5,0mm Number of pulling rolls: 2 pc., Ø 120mm, upper can be lifted by hydraulic Number of straightening rolls: 9 pc., Ø 60mm, upper rollls adjustable by hydraulic drive, all rolls supported equipped by: • hydraulic strip insertion device • lateral strip guidings at entrance • lateral strip guidings at exit • basket at exit • loop control by sensor • lateral loop guiding Roll feeder Type: Vhy 400 Width: max. 400mm Thickness: max. 5,0mm passline adjustement by hydraulic jack We can offer even only press or decoiling line

Year of construction: 1995, Condition: ready for operation (used), General Data Machine weight 9500 Main Drive Pressing force 800 kn Stroke 30-200 stokes/min Stroke adjustment Yes Table Outer length 810 mm Outer width 860 mm This EDELHOFF DARR 1/80 press was manufactured in 1995. It offers a pressing force of 800 kN with adjustable strokes ranging from 20-80mm and stroke rates from 30-200 per minute. The machine features a substantial table surface of 810x860mm and a maximum distance between table and ram of 450mm. It weighs 9.5 tonnes, suited for robust operations in sheet metal machinery. The EDELHOFF DARR 1/80 machine we have for sale. For more information about this press, please reach out to us. Application Types Broaching F82Ih7Ufi

Condition: good (used), Year of construction: 1977, Pressure 160 t Ram adjustment 75 mm Dqtsqn Strokes/min. 30-90 Stroke adjustment 20-130 mm Power requirement 15 KW Electrical system 380 V

Condition: good (used), Eccentric press manufacturer Gebrüder Edelhoff, type EPR/H35, press force 35 Megpont, machine number 8789, year of manufacture 11/1984 C0Jvxm3Qvw

Condition: used, Year of construction: 1997, Technical details: pressure: 160 t distance between columns: 1000 mm Bsgx7Vzdg0K stroke: 250 mm dayligth: 600 mm distance table/ram: 600 mm table height over floor: 550 mm table surface area: 810 x 860 mm clamping surface ram: T x B: 720 x 580 mit T-Nuten mm total power requirement: 15 kW weight of the machine ca.: ca. 16,0 t The machine isn't installed yet. The pictures are from the origin location of the former owner. further details: - sideway passage W: 520 x H: 620mm - passage front side W:660mm x H: 600mm equipment: - walkable platform arround the machine= height over floor approx. 2400mm, platform approx. 2700 x 2600 x 1050mm - hydraulic pack - oil cooler i.D. *

Year of construction: 1984, Condition: refurbished (used), PRESSURE 200t TABLE UP/DOWN 1130x860mm STROKE 250mm DAYLIGHT 500mm Iwfom3V

Condition: reconditioned (used), Year of construction: 1983, Power: 2.000 kN Frequency: 60 rpm Qghvo8G7 Stroke, adjustable: 20 - 120 mm Daylight: 450mm (max. stroke up) Ram adjustement: 100mm Size of bolster: 850 x 810mm Opening in bolster: 00 x 50mm Ram area: 750 x 810mm Motor power: 22 kW equipped by: - 1pc. con rod - 6pc. guideways - hydraulic overload - motorized oil lubrication - motorized ram adjustment - manuel stroke adjustment - pneumatic ram balancing cylinder - anti vibration machine feet

Condition: used, Year of construction: 1982, pressure 100 t throat 300 mm stroke 20 - 130 mm ram adjustment 65 mm no. of strokes 60 Hub/min table surface area 850 x 550 mm total power requirement 7,5 kW weight of the machine ca. 5,3 t dimensions of the machine ca. 2,03 x 1,67 x H 2,44 m Bsejqwko7Qo

Year of construction: 1995, Condition: ready for operation (used), A Gebrüder Edelhoff punching machine is available. Pressing force: 80t, stroke adjustment: 20mm-80mm, ram adjustment: 100mm, stroke rate: 30-200/min, motor power: 15kW, weight: approx. 9500kg. Including reel AMT CA 300/R7-60. The machine occasionally has a problem with the speed, as it increases by itself. This is probably due to the wiring harness. An on-site inspection is possible. Dpsfkb

Year of construction: 1984, Condition: used, pressure 100 t throat 345 mm stroke 20-100 mm no. of strokes 60 Hub/min ram - range of adjustment 85 mm table surface area 980x650 mm ram surface 600x440 mm hole in the table Ø 200 mm Qeaepz7 table height 820 mm tool hole in ram ¤7 65 mm weight of the machine ca. 7 t dimensions of the machine ca. 2000x2000x2900 mm

Year of construction: 1989, Condition: ready for operation (used), Functionality: fully functional, TECHNICAL DETAILS pressure: 160 t table: 1250 x 850 mm Stroke: 20-160 mm Strokes: 20-100 per min EQUIPMENT - with complete conveyor system - hydraulic overload protection - pneumatic clutch C00Esk0Dew - 2- connecting rods

Year of construction: 1980, Condition: used, pressure 100 t distance between columns - mm stroke 350 mm table size 1150 x 700 mm total power requirement 11 kW weight of the machine ca. t dimensions of the machine ca. m Rqnu0Hop - cutting impact dampening - die cushion - without electrical cabinet

Year of construction: 2010, Condition: excellent (used), Weight 52 kg Br0Iiyjigxc Picker from IMM Engel Victory 80/50 Spex

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, Manufacturer Europress max. pressing force 120 t Operating hours approx. 15000 h Year of construction 2017 Drive motor 2x 45 KW Filling opening 1000x2000 mm Cutting system and pre-press flap Bale size 750 x 1100 mm (length adjustable) Bale weights 480-850kg, depending on material and length cross binding 5-fold vertical strapping 2-fold horizontal strapping Press weight 36900 kg available in 10-12 The offer is subject to change, interim sale reserved and can be revoked at any time. Warranty or warranty performance is excluded. We accept no liability for any information provided or any errors. Beowvcalck

Condition: used, Please contact us for more information. Z0Cjxyoj3

Mileage: 63,703 km, power: 331 kW (450.03 HP), first registration: 04/2022, overall weight: 39,000 kg, fuel type: diesel, color: grey, axe configuration: > 3 axles, maximum load weight: 22,161 kg, empty load weight: 16,839 kg, tire size: 385/55 R22,5, wheelbase: 5,150 mm, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: air, loading space volume: 14 m³, loading space width: 2,490 mm, loading space length: 6,340 mm, loading space height: 920 mm, Year of construction: 2022, Condition: used, number of seats: 2, Equipment: ABS, air conditioning, cruise control, differential lock, hydraulics, navigation system, Colour Grey, Kerb weight: 16839kg, Gross vehicle weight: 39000kg, Load space (L W H): 6,340 mm x 2,490 mm x 920 mm, 1st axle: 385/55 R22.5, 2nd axle: 385/55 R22.5, 4th axle: 385/55 R22.5, Air suspension, Lift axle, Digital tachograph, EBS - Electronic Brake System, Automatic air conditioning, Seat heating, LED headlights, Headlamp cleaning system, Automatic lights, Headlamp levelling, Radio, Bluetooth audio streaming, Bluetooth mobile phone preparation, Mechanically adjustable steering column, Electric window lifters, Fog lights, Electric windows, Wiper blades ... and heated exterior mirrors, Electric kerb mirror, Wide angle mirror, Immobilizer, Central locking with remote control, Refrigerator, Axle load indicator, Working lights, Hill Hold Control HHC, LED daytime running lights, Floating function, Telematics system, Front camera, Cab suspension, SCR, Radio remote control, Hiab X-Hipro 262 3Mkhdnc7A

Condition: excellent (used), Schaal SEP 40 Automatic Punching Press. Year of manufacture: 1993. Completely revised in 2023 with new Siemens PLC control. Nominal capacity: 400 [kN] (40 [t]). Min./Max. number of strokes: 100 – 500. Ram adjustment: 70 [mm]. Variable stroke: 8 – 70 [mm]. Ram surface area: 340 – 300 [mm]. Stroke range: 8, 10, 15, 20, 25, 31, 36, 41, 46, 50, 54, 58, 61, 64, 66, 68, 69, 70 [mm]. Table dimensions: 550 x 580 [mm]. Fitted with gripper feeding device SZV 2. Width of strip: 8 - 120 [mm]. Feed length: 2 – 80 [mm]. Feeding thickness: 0.1 – 2 [mm]. Cyoj3Zwhoe Feeding: 180 [°]. Feed accuracy: ±0.01 [mm]. Drive power: 7,5 [kW]. Dimensions (H x W x L): 2300 x 1600 x 1400 [mm]. Weight: 3800 [kg]. Including operating instructions in German and English and schematics included. Also on stock high speed presses: Mabu, Schaal, Bihler and other Bruderer models. Also Ideal BAS welders

Condition: new, Year of construction: 2024, Fiber optic laser cutters are modern devices that are distinguished by numerous advantages. They are not only an excellent and much more profitable alternative to the CO2 technology, but also have a lot of advantages in themselves that allow you to develop production (up to 70%) and improve its quality. FIBER technology allows you to cut sheets and other materials of various thicknesses, from very thin to very thick. The wavelength in the FIBER laser is 1.064 micrometers. These properties result in an intensity that is 100 times greater than that of CO2 devices of similar power. The greatest advantages of the laser are: failure-free optical fiber, no wearing parts, The fiber laser source takes up about 1/3 less space, high energy efficiency - 100,000 hours of operation, universal use (special steel, black and stainless steel, copper, brass, aluminum, titanium). Fiber laser increases work efficiency by 80%, lowers service costs by 70%, saves 80% of energy, minimizes gas consumption, saves hall space by 30%. Security and no pollution full laser housing, observation window with laser protective glass in European CE standard, smoke produced by cutting can be filtered inside, it does not pollute the environment. Sliding gate made of seasoned aviation aluminum The construction of the sliding gate is made of seasoned aviation aluminum formed with a force of 4300 tons, achieving incredible stiffness. Aviation aluminum has many advantages: high stiffness (greater than cast iron), low weight, resistance to corrosion and oxidation, and good machinability. Removable build table The interchangeable work table consists of upper and lower platforms whose movement and exchange are controlled by the controller. The machine is able to replace the platform within 15 seconds. Welded bed made of rectangular profiles The construction of the bed has an internal structure resembling a honeycomb, made of many welded rectangular tubes. Stiffeners are placed inside the tubes, which increase the strength of the bed, and also increase the rigidity and stability of the guide rail to effectively prevent its deformation. High strength, stability, tensile strength, ensuring 20 years of use without distortion. Raytools head Autofocus. The software automatically adjusts the focusing lens when cutting sheets of different thicknesses. The auto focus speed is ten times faster than the manual focus speed. Greater range of manual adjustment - adjustment range -10mm - +10mm. The precision of 0.01 mm is applicable to various thicknesses of materials (0-20 mm) - below the power of 1500W. Long life. Collimator lenses and focusing lenses have a water-cooling heatsink, which lowers the temperature of the cutting head to extend the life of the cutting head. Technical parameters WORKSPACE 2000x4000 POWER 1000W 1500W 2000W 3000W 4000W 6000W 8000W 12000W REPEATABLE POSITIONING ACCURACY ±0.02 mm/m MAXIMUM SPEED 120 m/min Vwkahy MAXIMUM ACCELERATION 1,5G POWER SUPPLY 400V 50Hz The laser uses components from world producers

Mileage: 761,000 km, power: 382 kW (519.37 HP), first registration: 06/2010, overall weight: 32,000 kg, fuel type: diesel, color: white, axe configuration: > 3 axles, gearing type: mechanical, emission class: euro3, loading space width: 2,470 mm, loading space length: 5,300 mm, loading space height: 600 mm, Year of construction: 2010, Condition: used, Equipment: ABS, air conditioning, crane, Volvo FH 520 / 8x4 Platform 5,30 m + CRANE + REMOTE CONTROL Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2010 ? MILAGE: 761 000 km EQUIPMENT: ? ABS ? C. LOCKING ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING Dpgoqt ? TACHOGRAPH PLATFORM: 530 x 247 x 60 cm (L x W x H) CAPACITY: 10 000 kg TOTAL WEIGHT: 32 000 kg WHEELBASE: 200/360/138 cm TIRE SIZE: 315/80R22,5 SUSPENSION: SPRING CRANE: HIAB 1055 EP - 4 HIPRO + REMOTE CONTROL VIN: YV2AS50G89A686200 TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr)

Year of construction: 2023, Condition: new, machine/vehicle number: MR005063, Maximum technology with limited space requirements. Four-axis CNC machine with bumper protection, to be used for panel machining and solid wood. Machine with industrial designed frame, heavy duty, maximum precision on operations. Equipped with Easy2Go modern interface.Machine is equipped with the following options: - Machine conforming to CE regulations - Automatic lubrication system - Suction hood main motor 3-position adjustable - Tool length control Technical specifications: - Maximum panel thickness : 180 mm - Maximum panel length : 3115 mm - Maximum panel width : 1320 mm - Machine table : Beams with vacuum cups - Safety system : Bumper protection - Number of drilling spindles vertical : 12 piece - Number of horizontal drilling spindles (over Y-axis) : 2 piece - Number of horizontal drilling spindles (over X-axis) : 4 piece - Power milling motor : 13 hp - Milling spindle change : HSK63F - Tool changer positions : 11 piece - Milling spindle speed : 24000 /min - Tool length measuring system : Yes - Serial number : AH00006001 Biqmcokb8X3

Year of construction: 1997, Condition: used, Manufacturer: Minipack-Torre Model: EP40 M7Ura3Qno Type: Heat shrink wrapper on wheels Year: 1997 Function: Single sealer / Sealer + heat shrink Application: Machine for wrapping products (small objects, toys, accessories, etc.) in shrink film. Welding frame: 45 x 30 cm

Condition: excellent (used), Year of construction: 2019, Functionality: fully functional, type of cooling: air, overall weight: 2,310 kg, total width: 1,100 mm, total length: 4,400 mm, total height: 1,800 mm, warranty duration: 6 months, heating capacity: 265.5 kW (360.98 HP), HEAT PUMP KEYTER KWE6270QEP4W 265,5 Kw Heating capacity: 265.5 kW / 75.6 tons (40/45 — 7°C) Year of manufacture: 2019 Options: Hydraulic module Refrigerant circuit: 2 pcs. Condenser: Copper / Aluminum Heat exchanger: Plate Type of refrigerant: R410A Compressors: 2 pcs. DANFOSS DSH240A4APC + DANFOSS DSH295A4APC (scroll) Number of fans: 3 pcs. EBMPAPST A3G800-AU25-01 Hydraulic module: 2 pcs. water pump EBARA 30/1 50-160/7.4 expansion vessel. Weight: 2310 kg. Dimensions: 4.4 x 1.1 x 1.8 m. Working hours: 1024/1024/1477/1474 h. Dqqqjt Condition: Excellent

Condition: reconditioned (used), Year of construction: 1983, Functionality: fully functional, machine/vehicle number: 687, Schaal SEP 40 Automatic Punching Press. Year of manufacture: 1983. Machine completely reconditioned in 2023. Nominal capacity: 400 [kN] (40 [t]). Min./Max. number of strokes: 100 – 500. Ram adjustment: 70 [mm]. Variable stroke: 8 – 70 [mm]. Ram surface area: 340 – 300 [mm]. Stroke range: 8, 10, 15, 20, 25, 31, 36, 41, 46, 50, 54, 58, 61, 64, 66, 68, 69, 70 [mm]. Table dimensions: 550 x 580 [mm]. Fitted with gripper feeding device SZV 2. Width of strip: 8 – 120 [mm]. Feed length: 2 – 80 [mm]. Feeding thickness: 0.1 – 2 [mm]. Feeding: 180 [°]. Feed accuracy: ±0.01 [mm]. Drive power: 5,5 [kW]. Bjbzgyfv2Gc Dimensions (H x W x L): 2300 x 1600 x 1400 [mm]. Weight: 3800 [kg]. Operating instructions in German and English and schematics included.

Condition: used, Year of construction: 1992, Schaal SEP 40 control unit. Only control cabinet without machine. In tested working condition as seen on video. Disconnected from machine and in storage. Including original technical documentation. We have on stock more Bruderer, Mabu and Schaal high speed presses. Qwler