Universal machining center

DMG MORI DMU 60 eVo

Condition: excellent (used), Year of construction: 2014, operating hours: 66,600 h, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer you: Technical data: Control system: Heidenhain iTNC 530 HSCI Travel ranges: - x-axis: 600 mm - y-axis: 500 mm - z-axis: 500 mm Main spindle: - Speed range: 20 - 18,000 rpm NC rotary table: - Table clamping surface: 600 x 500 mm - Load capacity: 400 kg - b-axis: -5° to +110° - c-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool positions: 210 Lrsdpfx Aexgnz Tek Ajp Equipment and accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct path measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC swivel rotary table incl. table cooling - Laser tool measurement BLUM NT - Calibration mandrel with tool holder - Measuring probe infrared, manufacturer Heidenhain TS 649 - Preparation for 3D quickSET - Chip conveyor - MQL, 40 bar, tank 600 l, incl. rotating viewing window, compressed air, linear measuring systems, bed flushing - Flushing gun - Mechanical oil and emulsion mist separator - Compressed air through the spindle center - Operating mode 4 - Machine preparation for handling systems, consisting of: - Automatic, side loading door - Electrical interface for articulated-arm robots - Pneumatic control and monitoring of the zero-point clamping system - Selection and de-selection of the handling system via a switch on the machine control panel - incl. additional flushing in the work area - incl. machine preparation for job management - incl. control panel arrangement on the left - Power supply to the machine table incl. 2-channel rotary feedthrough - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 clamping circuit, 30 - 240 bar, pressure adjustment via proportional valve technology - incl. extension of the rotary feedthrough to 4 channels Operating hours: approx. 66,600 h Spindle hours: approx. 44,800 h The ball screw drives and linear guides in the x and z axes have been renewed. Accessories, tools and clamping devices shown in the pictures are only included in the scope of supply if this is noted in the additional information. Changes and errors in the technical data and information, as well as prior sale, are reserved!

Condition: new, connected load frequency 230 V battery 24V / 100Ah Brush diameter 510 mm turning speeds 175 U/min 0 Luft 24 L / s tank capacity 50 / 50 Liter weight 160 kg range L-W-H 1,1 x 0,52 x 1,0 mm KREMER floor cleaning machine: Packed with battery and charger Theoretical surface cleaning: Output: 2000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working area incline: 2% Ljdpfx Aksvu Hcce Asrp Fresh/waste water tank volume: 50/ 50 L

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 640, total height: 2,700 mm, overall weight: 9,600 kg, spindle speed (max.): 20,000 rpm, product length (max.): 3,000 mm, number of axes: 5, This 5-axis DMG MORI DMU 60 EVO was manufactured in 2017. It features a Heidenhain iTNC 640 control, a spindle speed of 20000 rpm, and a 120-fold tool changer. The machine includes a chip conveyor, coolant system, and an internal coolant supply of 40bar. It's well-suited for high-precision machining tasks. Consider the opportunity to buy this DMG MORI DMU 60 EVO vertical machining centre. Contact us for more information about this machine. • NC swivel rotary table • Tool changer: Yes, chain magazine 120 positions (120-fold) • Coolant: internal/external; internal coolant supply 40 bar / 6001; extended chip flushing; flushing gun; blast air through spindle center • Rotating viewing window • Electronic handwheel Ledpfx Aey D Hvask Asrp • Screen display: German/English • Space requirement: 25 sqm • Condition: Very good, in operation Additional equipment • Chip conveyor • Oil and emulsion mist separator • Infrared PP 60 optical measuring probe • Tool breakage control TRS2 • Signal light, 4-color • Extended interface M65 for Erowa Job Management System • Preparation for EROWA handling system (Operating mode 4) • Accessories: 120x SK40 tool holders Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2015, operating hours: 50,976 h, functionality: fully functional, nominal power (apparent): 57 kVA, overall weight: 9,850 kg, spindle speed (max.): 18,000 rpm, input voltage: 400 V, For Sale: DMG MORI DMU 60 eVo CNC 5-Axis Universal Machining Center — 2015 German-made DMG MORI DMU 60 eVo CNC 5-axis universal machining center, suitable for high-precision and complex milling operations. The machine offers excellent rigidity, precision, and productivity for mold manufacturing, precision engineering, automotive, aerospace, and general machining applications. Main Specifications: Manufacturer: DMG MORI / DECKEL MAHO Seebach GmbH Model: DMU 60 eVo Year: 2015 Origin: Germany Spindle Speed: 18,000 rpm Weight: 9,850 kg Power: 57 kVA Voltage: 400 V / 50 Hz CE Certified Ledsy Rd Rnspfx Ak Aerp Available for inspection. Photos, videos, and further technical details can be shared upon request.

Condition: new, weight max. in kg 1200 kg Lodsfgyhnopfx Ak Ajrp fork length 1150 mm stroke height min 85, max 190 mm 160 mm length in width 550 mm number of wheels 4 vorne, 2hinten tire equipment 80 x 70mm PU tandem fork arm (length x width x thickness) 1150 x 160 x 45 mm turning radius 1452 mm battery 48V / 20Ah weight of the machine ca. 0,140 t dimensions 1,65 x 0,55 x 1,2 m SPECIAL PRICE!!! - Battery charging time only 3 hours - Electrically lift and move - Use up to 6 hours - Easy to maneuver due to its low weight - Powerful lithium battery Driving speed - 4.5 km/h without load - with load 4.0 km/h

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 2,560 h, load capacity: 1,600 kg, lifting height: 4,950 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,150 mm, fork length: 1,200 mm, empty load weight: 3,400 kg, total length: 2,114 mm, drive type: Elektro, construction width: 1,100 mm, Electric 4-wheel forklift Load centre: 500 Mast type: Triplex Speed class: 20 Condition: Ready for use and fully functional Technical condition: normal Front tyre type: Non Marking Lrjdpfx Akew U E Uuj Aop Front tyre condition: 60 - 80% Rear tyre type: Non Marking Rear tyre condition: 60 - 80% Battery voltage: 48V Battery capacity: 625Ah Battery type: PzS Sideshift, 3rd valve, rear work light, front work light,

Condition: ready for operation (used), Year of construction: 2010, operating hours: 8,510 h, travel distance X-axis: 730 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: SIEMENS, controller model: 840D solutionline, spindle speed (max.): 18,000 rpm, spindle motor power: 15,000 W, number of axes: 5, This 5-axis DMG MORI DMU 60 monoBLOCK was manufactured in 2010. It features a working area of 730 mm x 560 mm x 560 mm and a rigid table size of 1,000 mm x 600 mm. The machine is equipped with a motor spindle capable of 18,000 rpm and includes a controlled NC swivelling milling head. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 60 monoBLOCK vertical machining centre we have for sale. Contact us for further details. • Swivelling milling head: Controlled NC B-axis with hydraulic clamping • Spindle offset: 100 mm • Swivelling range: -120° / +30° (X-axis travel reduced by 100 mm) • Tool changer: Pick-up system, 24 magazine positions • Table: Rigid, 1,000 mm x 600 mm • Control: Siemens 840D solutionline • 3D path control • 3D machining, 3D tool correction • TRANSMIT lateral surface transformation (milling of cylindrical paths - TRACYL) • CompCad compressor function for high-speed machining • Operating mode 4 (manual intervention with doors open) • Probing and calibration: • 3D measuring probe • 3D quickSET toolkit for checking/correcting 5-axis kinematic accuracy • Running time: 30,106 hours (spindle: 8,510 hours) • Note: Soft key buttons on the screen sometimes fail; operation may require the machine’s mouse pad or an external keyboard. Additional equipment • Chip conveyor • Optional: 125 SK40 tool holders Technical Specification Taper Size SK 40 Lodpfx Akjy Ndklo Asrp

Condition: used, Year of construction: 2017, travel distance X-axis: 435 mm, travel distance Y-axis: 465 mm, travel distance Z-axis: 560 mm, workpiece weight (max.): 80 kg, total height: 2,755 mm, total length: 3,360 mm, total width: 3,870 mm, overall weight: 8,500 kg, spindle nose: MAS BBT 40, 5-axis Vertical Machining Centre CNC Control Matsuura G-Tech 31 i Table size ø 130 mm Table load 80 kg Number of pallets 10 max workpiece dia x height 330 x 300 mm Movement X-axis 435 mm Movement Y-axis 465 mm Movement Z-axis 560 mm C-axis (table rotation) 360° A-axis (table tilt) -125/+10° Spindle speed 50 - 15.000 R/min Spindle taper MAS BBT 40 Spindle motor 7,5/5,5 kW Magazin capacity 90 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Lrjdpfjy Ny Aksx Ak Asp Feel free to view our other advertisements for a complete overview of our stock.

Year of construction: 2016, condition: ready for operation (used), Control Unit Brand HAAS Model Sigma 5 Main Drive Number of axis 2 This HAAS TR160 with Sigma 5 was manufactured in 2016. It features a 2-axis table and is equipped with a Sigma 5 servo motor, ensuring precise and efficient operation. Ideal for those looking to enhance their machining capabilities. Contact us for more information. Application Types Ljdex H Uz Nepfx Ak Aorp Other Machine Tools

Condition: good (used), Year of construction: 2013, Ref. -No.: 10636 Manufacturer: TOS VARNSDORF Type: WHN 13 CNC Ljdpfx Aszc D E Iok Aerp Year of construction: 2013 Type of control: CNC-Steuerung Control: Heidenhain 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 3500 mm Y-Travel: 2000 mm Z-Travel: 1250 mm W-Axis: 800 mm B-Axis: 360 ° Table Load: 15.000 kg Tool Taper: SK 50 Turning Speeds: 1400 RPM Spindle Speed: 2000 RPM Table size: 1800 x 2200 mm Further information: - The control system was converted to a HEIDENHAIN 530i in 2013. - All drives were upgraded to digital. Thrust bearing replacement on the tower also renewed in 2013. - Accessories: - 3D probe - Heidenhain, large spindle support - 1x Heidenhain axis module (completely overhauled), - 1 new axis module is installed in the machine. - Newly packaged spare parts, covers from the machine. - All bearings have been replaced on the machine in recent years. - Tools and milling cutter heads are available. The machine is first-hand. The machine is still powered up and in production. The machine can be viewed by appointment.