Universal machining center

Deckel Maho DMU 60

Condition: used, Year of construction: 1999, serial number 10970000633 control 3D Bahnsteuerung MILLPLUS letzte Ausbaust Control 67 10.221.661 x-travel 600 mm y-travel 700 mm z-travel 550 mm spindle SK40 - neu - 380 Std. Gbsdpfx Asx Uz Apectjw spindle speed: 12.000 U/min tool change unit 30 Plätze Infrarot-Taster 600 L 40 bar mode of operation 3 + 4 MillPlus IT flushing gun mit Pumpe Durchmesser 630 mm T-slots 9 T-Nuten 14 H7 / 63 mm capacity 700 kg

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 104605-104645, input voltage: 400 V, total width: 1,500 mm, total length: 4,500 mm, total height: 2,820 mm, type of input current: three-phase, Fortuna Primus K4 – 4-row roll divider – rounder + depositor + GEK, year of manufacture 2011 Dough divider & rounder Condition: fully functional, directly from ongoing operation Application: round rolls, e.g., Kaiser rolls, braided rolls, salt rolls, wheat & mixed doughs • Weight range: approx. 40-110/120 g • Hourly output: approx. 4,800 pieces/hour • Rounding chamber height: approx. 10–35 • Rounding speed: scale 0–30 • Hopper volume: 20–25 kg • Dough yield: TA 160–165 Gbedpfxoy St U Sj Actew • Connection power: approx. 1.5 kW • Machine weight: 650–700 kg • Depositor: for 60 × 80 cm trays (58–78) _____ Equipment • Fortuna Primus K head machine • 4 rows • GEK pre-fermentation cabinet matching the line • Rounding/stamping sets: Kaiser rolls, braided rolls, salt rolls • Complete depositor • Immediately ready for operation • In use until recently • Clean, well-maintained, regularly serviced • No known defects • Electronics modernized (new display) INSPECTION and TRIAL RUN possible (only) by appointment Freight possible, fully assembled with a jumbo truck (L/W/H = approx. 4,500 mm x 1,500 mm x 2,820 mm)

Condition: good (used), Year of construction: 2000, operating hours: 53,776 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 380 mm, rotary table diameter: 500 mm, rotational speed (max.): 18,000 rpm, For sale is a 5-axis simultaneous milling machine from Deckel Maho, model DMU 50 eVolution. The machine is in good condition and ready for immediate use. Technical Data: Year of manufacture: 2000 Control: MillPlus Power-on hours: 53,776 h Spindle hours: 18,512 h X-axis: 500 mm Y-axis: 400 mm Z-axis: 380 mm B-axis: 0-180° C-axis: 360° Clamping surface: Ø 500 mm Max. table load: 200 kg Spindle taper: SK40 Max. speed: 18,000 rpm Spindle power: approx. 15 kW Tool magazine: 60 slots Dimensions: approx. 3,400 x 2,400 x 2,500 mm Weight: 5,500 kg Transport and loading can be arranged Europe-wide at an additional cost upon request. Prices are subject to VAT. Viewing possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell your equipment? Gsdpfx Ajwxd Agectebw For further information or contact options, please visit our website.

Condition: good (used), Year of construction: 1998, Machine is in good working condition. Parts shown by hand not come. Gbjdo Aihrrspfx Actjw X 600 mm, Y 525 mm, Z 500 mm, 12.000 rpm, 25 places in tool changer. max part wight 350 kg 4.200 kg

Condition: used, Year of construction: 2000, operating hours: 3,273 h, machine/vehicle number: 15015702974, travel distance X-axis: 710 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, torque: 130 Nm, controller manufacturer: Heidenhain 426/430, workpiece weight (max.): 350 kg, total height: 2,724 mm, total length: 2,756 mm, total width: 2,020 mm, table width: 500 mm, table length: 700 mm, rotary table diameter: 700 mm, overall weight: 5,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, number of spindles: 1, number of slots in tool magazine: 32, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, 5-Axis Machining Center DECKEL MAHO DMU 70V We offer for sale an advanced, universal vertical machining center, the Deckel Maho DMU 70V (part of the renowned DMG MORI group), equipped with a numerically controlled (NC) rotary/tilting table. The machine features a compact and robust design, minimizing its footprint in the production hall while offering full capabilities for advanced 5-axis machining. AXIS SPECIFICATIONS AND WORKING AREA • Axis travel (XYZ): X = 710 mm | Y = 520 mm | Z = 520 mm • Working travel: 710 mm (X) / 520 mm (Y) / 520 mm (Z) INNOVATIVE NC ROTARY/TILTING TABLE (4th and 5th AXIS) • Mounting surface dimensions: ∅ 700 mm x 500 mm (practical design with factory-cut sides, facilitating optimal mounting of vises and fixtures) • Maximum table load: 350 kg (full mechanical safety of the gearbox, bearings, and measuring system) • Axis rotation range: • C-axis (rotation): continuous / multi-rotation operation (advanced trochoidal milling strategies) • B-axis (tilting): wide working range of over 180°, providing excellent access to the workpiece and freedom for angled undercutting MAIN DRIVE AND SPINDLE • Spindle speed: continuously (steplessly) adjustable in the range of 20 – 12,000 rpm • Spindle power: 15 kW • Maximum torque: up to 130 Nm (powerful cutting force guaranteeing excellent stiffness and stability during heavy rough machining of hard materials) CONTROL SYSTEM AND TOOL MAGAZINE • Control system: Reliable and widely appreciated by operators, the Heidenhain 426/430 (simple dialog programming, intuitive menu) • Tool magazine: Automatic, compact chain-type magazine with a capacity of 32 positions (fast tool change in automatic cycles) Gbjdozumh Iepfx Actew LOGISTICAL AND CONNECTION PARAMETERS • Overall dimensions of the machine ready for operation (with chip conveyor): • Length: 2756 mm • Width: 2020 mm • Transport height: 2724 mm (the machine fits easily on standard trailers and passes through conventional hall doors) • Total machine weight: approx. 5,500 kg • Maximum power consumption (connection): up to 42 kVA • Input voltage: 400 V (AC - three-phase current) • Current protection (fuse): 63 A • Power supply frequency: 50/60 Hz MACHINE CONDITION AND ADDITIONAL INFORMATION The machine is in good technical condition, regularly serviced and maintained. It is ideally suited for both serial production and tool shops producing complex molds, dies, and precise 5-axis parts. The machine comes complete with a chip conveyor.

Condition: good (used), Year of construction: 2010, operating hours: 44,200 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: Siemens, controller model: 840 D, table load: 600 kg, rotational speed (min.): 20 rpm, rotational speed (max.): 12,000 rpm, overall weight: 10,000 kg, operating hours of spindle: 22,700 h, coolant supply: 40 bar, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, Manufacturer: DMG DECKEL MAHO Year: 2010 Machine Type: 5-Axis Milling-Turning Center General Information CNC Control: Siemens 840D sl Machine Weight: approx. 12,000 kg Travel and Axes X-Axis Travel: 600 mm Y-Axis Travel: 700 mm Gjde Ai Spwepfx Actobw Z-Axis Travel: 600 mm B-Axis: −30° to +180° C-Axis: 360° Rapid Traverse X/Y/Z: 60 m/min Main Spindle Max. Spindle Speed: 12,000 rpm Milling-Turning Table Table Diameter: 700 mm Max. Table Load: 600 kg Milling Table Speed: 50 rpm Turning Table Speed: 1,200 rpm Tool Magazine / Equipment Tool Capacity: 60 Tool Holder: HSK-A63 High-Pressure Coolant: 40 bar Tool Measurement: BLUM 3D Laser Workpiece Probe: TS 649

Condition: ready for operation (used), Year of construction: 2001, operating hours: 18,391 h, functionality: fully functional, machine/vehicle number: 11160000853, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-Axis Travel: 600 mm Y-Axis Travel: 700 mm Z-Axis Travel: 600 mm Maximum Spindle Speed: 12,000 rpm X-Axis Feed Rate: 20 – 15,000 mm/min Y-Axis Feed Rate: 20 – 15,000 mm/min Z-Axis Feed Rate: 20 – 15,000 mm/min Rapid Traverse X-Axis: 40 m/min Rapid Traverse Y-Axis: 40 m/min Rapid Traverse Z-Axis: 40 m/min Linear Scale Resolution X-Axis: 0.001 mm Linear Scale Resolution Y-Axis: 0.001 mm Linear Scale Resolution Z-Axis: 0.001 mm Input Increment X-Axis: 0.001 mm Input Increment Y-Axis: 0.001 mm Input Increment Z-Axis: 0.001 mm Positioning Accuracy X-Axis: 0.01 mm Gedps Ai Ekmsfx Actsbw Positioning Accuracy Y-Axis: 0.01 mm Positioning Accuracy Z-Axis: 0.01 mm Tool Holder: SK 40 NC Rotary Table Clamping Surface Diameter: 630 mm Max. Table Rotation Speed: 10.7 rpm Table Feed Rate: 3,600 /min Table Scale Resolution: 0.001 MACHINE DETAILS Control Manufacturer: Heidenhain Recorded Spindle Hours: 18,391 h Operating Voltage: 400 V Frequency: 50 Hz Rated Current: 80 A Connected Load: 44 kVA Dimensions & Weight Dimensions (L x W x H): 5,500 x 4,500 x 2,500 mm Machine Weight: 10,000 kg EQUIPMENT 60-station tool changer Chip conveyor Cooling system

Condition: good (used), Manufacturer: Deckel MAHO Year of manufacture: 1996 Type: DMU 50 V Machine number: 21503700 Control system: DMG Operating hours: 17,185 h Spindle hours: 6,720 h Table: Rotary table with swivel axis Gbjdjy Uckzepfx Actew Size: 500 mm diameter x 380 mm Swivel range: 180° Table load capacity: 200 kg Travel ranges x-y-z: 500 – 380 – 380 mm Spindle connection: SK 40 Tool changer: 24 positions (2 x 12) Spindle speed: 20 to 8,000 rpm, continuously programmable Spindle power: 10 / 15 kW Feed rate: 0 to 10 m/min, continuously programmable Rapid traverse: 30 m/min Accessories: separate coolant system Chip conveyor Condition: good Connection: 36 kW Machine dimensions: 3,000 x 2,100 x 2,300 mm Coolant system dimensions: 1,600 x 2,000 x 1,800 mm Weight: approx. 4.5 t

Condition: excellent (used), Year of construction: 2002, operating hours: 18,419 h, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: Heidenhain, table load: 350 kg, number of axes: 5, TECHNICAL DETAILS X-axis travel: 630 mm Y-axis travel: 560 mm Z-axis travel: 560 mm Table length: 1,000 mm Table width: 600 mm Rotary table diameter: 600 mm Table weight: 800 kg Table load capacity: max. 350 kg Number of T-slots: 8 / 1 T-slot width: 14 H12 / 14 H7 mm T-slot spacing: 63 mm Spindle speed: 12,000 rpm C-axis swivel range: 360° Tool holder: SK 40 Tool positions: 24 Gjdpfx Aj Afw Aujctobw MACHINE DETAILS Control system manufacturer: Heidenhain Spindle operating hours: 18,419 h Total operating hours: 50,446 h EQUIPMENT 5-axis machining (3+2) Controlled NC swivel milling head (B-axis) NC rotary table (C-axis), integrated into the fixed machine table 24-position tool changer

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 10960000423, For sale is a CNC universal milling machine, type Deckel Maho DMU 60T, manufactured in 1999. This machine stands out due to its robust design (cross slide) and is ideal for toolmaking, prototype production, training, or as a versatile workhorse in the workshop. The machine is in good condition and can be inspected while powered on after prior arrangement. Equipment: - Rigid T-slot table - Precision vise Gsds Ad Apqjpfx Actsbw - Control panel with Heidenhain control Accessories: - Workbench (4 drawers, 1 door) with attached bench vise - Stool - Tool clamping devices Attractive offer – flexible & worry-free We offer not only a high-quality product but also customized financing options that can be tailored to your needs. Whether it's a down payment, installment payments, or individual financing models, we will work together to find the right solution. Upon request, we also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so that you don't have to worry about anything. 📞 Please contact us for further information or a non-binding offer. We will provide you with personal and competent advice. Subject to prior sale, changes and errors!

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 1270mm/660mm/610mm, speed: 10000rpm, max. table load: 3000kg, spindle mount: CAT40, tool positions: 40, machine dimensions X/Y/Z: approx. 3300mm/2800mm/3000mm, weight: approx. 9000kg, control: Ultimax. Documentation available. On-site inspection is possible. Gbodouzyafepfx Actsw

Condition: excellent (used), Year of construction: 2001, I have a Deckel Maho DMU 60T machining center for sale. Control system: Heidenhain 430 Technical condition of the machine: Very good Year of manufacture: 2001 Country of origin: Germany Machine parameters: X-axis travel: 630 mm Gsdpfxj Ahdrvo Actebw Y-axis travel: 560 mm Z-axis travel: 560 mm Swiveling head Maximum spindle speed: 12,000 rpm Tool magazine: 24 tools (2 x 12 tools) Heidenhain linear scales on all axes Chip conveyor Central lubrication Hydraulic tool clamping Spindle taper: SK40 Complete programming manual Mechanical and electrical documentation Loading is included in the price Stal-Com has been involved in the sale, service, and training for CNC machines from the DMG group for 20 years. We specialize in all models of Gildemeister lathes and Deckel Maho machining centers. All machines undergo a thorough technical inspection. Our machines are purchased not only by customers in Poland but also by customers throughout Europe and parts of Asia. Each machine can be inspected during production, as we also offer machining services. After purchasing a machine from our company, we provide training for the staff and can also set up production at the customer's facility. We cooperate with many companies on a long-term basis, supplying them with additional machine tools.

Condition: used, Year of construction: 2001, Technical details: x-travel: 630 mm y-travel: 560 mm z-travel: 560 mm c-axis: Tisch 360° ° b-axis: Spindel=rechts:90/links=10° manuell ° control: Heidenhain TNC 430 MillPlusM table-size: 1000x600 mm table load capacity: 400 kg tool taper: SK 40 Revolution per minute: 20 - 12 000 U/min. feed speeds infinitely variable: x/y/z= 20 - 10.000 mm/min tool changer: 2 Magazine tool changer with: 12 place pro Magazin spindle hours: 21 212 h operating hours - idle run: 49 845 h total power requirement: 20,6 kW Weight approx.: 6,7 t dimension machine xH: 3,0 x 2,0 x 2,15 m Equipment: - AC motors for x/y and z-axis - Tool clamping hydraulic/mechanical - Chip conveyor with separator (screw conveyor) - seperately working indexing head Ø 300mm with manual control unit for B-axis table tilting -10° / +95° and C-axis table turning 360° (not interpolable, electric selectable via manual control unit) - Coolant unit 8 m³/h (dimensions: L:1,1 x W: 0,54 x H:1,2m) Gbedpeu Idgcofx Actow - control unit *

Condition: good (used), total width: 375 mm, total length: 430 mm, total height: 95 mm, 2 magnetic Tables and 1 controll unit  Electropermanent magnetic clamping system Clamping all kind off jobs such as; Face milling, lateral drilling, Round bar facing and slots drilling Coupled parts machining ans forged parts machining Edge milling and chamfering plates machining on right angle Flattening through drilling and pocket execution Seperate MCC Control box with quick connection Table Length: 430mm Table Width: 375mm Table Height: 95mm Number of poles:56 Length: 375mm Gbodpewq Rutjfx Actow Width: 430mm Height: 95mm Weight: 350kg

Condition: ready for operation (used), Year of construction: 1998, operating hours: 23,800 h, travel distance X-axis: 600 mm, travel distance Y-axis: 525 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 25, number of axes: 3, This 3-axis DECKEL MAHO DMU 60 E was manufactured in 1998. It features an X-axis travel of 600 mm, Y-axis travel of 525 mm, and Z-axis travel of 500 mm. The machine is equipped with a 25-fold tool changer and a manually swivelable milling head, providing versatility for various machining tasks. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMU 60 E vertical machining centre we have for sale. Contact us for further details. Godpfx Aco Aazq Estebw • Milling Head: Manually swivelable • Tool Changer: 25-fold • Tool Holder: SK 40 • Spindle Speed: Up to 12,000 rpm • Operating Hours: Approx. 44,600 hrs. • Spindle Hours: Approx. 23,800 hrs. • Optional Equipment: Chip tray, manual touch probe, coolant unit Technical Specification Taper Size SK 40