Belt sander

Bernardo MS 150 x 2000 S-2

Condition: new, Bernardo belt grinder MS 150 x 2000 S-2 Belt dimensions: 150 x 2000 mm Belt speed: 14.5 / 29 m/s Contact wheel diameter x width: 200 / 155 mm Flat grinding table: 460 x 150 mm Dust extraction port diameter: 100 mm Motor output power S1 100%: 2.1 / 2.8 kW Motor input power S6 40%: 2.8 / 3.6 kW Ljded Rw Rhjpfx Am Teac Voltage: 400 V Length: 1080 mm Width: 520 mm Height: 1000 mm Weight approx.: 85 kg

Year of construction: 2014, condition: ready for operation (used), An industrial Pyreg pyrolysis plant for the thermochemical utilization of biogenic residual materials is available. Fuel capacity: 500kW/module, max. fuel throughput capacity per module: 1375kg/year, min. fuel lower heating value on dry basis: 10MJ/kg, max. fuel moisture content: 50%, biochar production: 40kg/h, thermal heat output (exhaust gas heat): 150kW, power consumption: approx. 7.5kW. Plant dimensions X/Y/Z: approx. 9000mm/3000mm/3000mm, weight: approx. 10000kg, control system: PLC. Documentation available. An on-site inspection is possible. Lajdpfx Amjx Sywge Tjc

Condition: new, width of the strips 150 mm band length 2000 mm band speed 14.5 + 29 m/sek grinding width 460 x 150 Plantisch mm Laodpfjxabf Esx Am Toc Dust suction hood 100 mm total power requirement 4.0 kW 100% ED weight 84.0 kg range L-W-H 1080 x 520 x 1000 mm Standard with 2 speeds, ideal for grinding stainless steel properties - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the Sanding belt scope of delivery - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Year of construction: 2020, operating hours: 7,000 h, condition: good (used), functionality: fully functional, 🔹 General Machine Data Machine type: Pyrolysis plant / Carbonization plant / Biochar production plant Manufacturer: PYREG GmbH Model / Type: PYREG®-P500 Design: Containerized (modular) Ledpfsx Rpxksx Am Toac Condition: Used Year of manufacture: 2020 Operating hours: 7,000 Availability: Immediately / by arrangement Location: Germany 🔹 Main Technical Data Plant type: Continuous pyrolysis / carbonization Reactors: 2 × PYREG reactor Input materials: - Wood - Landscape maintenance material - Biomass (material dependent) Process: - Thermochemical carbonization - Exhaust gas recirculation (EGR) - Autothermal operation 🔹 Containers & Dimensions Plant container: Dimensions: 9,000 × 3,000 × 2,800 mm Weight: approx. 14 t Exhaust gas equipment container: Dimensions: 3,000 × 3,000 × 2,800 mm Weight: approx. 4 t 🔹 Reactor Technology Number of reactors: 2 Reactor dimensions (each): approx. 3,500 × 790 × 790 mm Function: Heating and carbonization of the feedstock Discharge: Screw conveyor with rotary valve Burn-back prevention: provided 🔹 Combustion Chamber Function: Combustion of process gases Dimensions: approx. 2,400 × 2,000 × 2,450 mm (including support frame) Weight: approx. 4,000 kg Burner: FLOX® burner Ignition: Pilot/ignition burner 🔹 Exhaust Gas & Heat Technology Heat exchangers: - High-temperature heat exchanger: Tube heat exchanger (max. 3 bar, approx. 1.1 m²), Ceramic heat exchanger (max. 3 bar) - Stainless steel plate heat exchanger: Max. operating pressure 30 bar, Exchange area approx. 5.51 m² Exhaust gas routing - Exhaust gas recirculation (EGR): available - Exhaust gas piping: Stainless steel DN200 PN10 - Exhaust outlet: approx. 6,000 mm above foundation 🔹 Conveying & Discharge Technology Feed hopper: - Volume approx. 2 m³ - Filling opening: 1,900 × 1,600 mm - Feeding: Walking floor & rotary valve Char / mineral discharge: - Conditioning screw - Water-cooled discharge - Airtight discharge 🔹 Fans & Electrical Equipment Exhaust fans: - 2 units (3.0 kW and 7.5 kW) Exhaust gas recirculation fan: - incl. Siemens frequency converter, 3.0 kW Combustion air fan: - incl. Siemens frequency converter, 3.0 kW 🔹 Control & Automation PLC: Siemens S7-300 Operator panel: Siemens TP1200 Comfort Control cabinet: - Dimensions: approx. 2,200 × 1,200 × 550 mm Degree of automation: Fully automatic 🔹 Peripheral Equipment (included) - Bruns walking floor container - Dosing bin approx. 30 m³ - Vertical screw conveyor - Cover - Control system 🔹 Permits & Operation BImSchV-compliant: Yes (plant-specific) Containerized: Yes Transportable: Yes

Condition: new, Year of construction: 2022, functionality: fully functional, Item: A-Aalborg-Micro AALBORG MICRO The Aalborg Micro is a compact exhaust gas heat exchanger/steam generator, designed for waste heat recovery from gas/MDO/HFO engines and gas turbines. As a heat exchanger, the Aalborg Micro offers a wide range of opportunities, due to the fact that hot water, TEG and TFO can all be used as media. Furthermore the Aalborg Micro can be used as a steam generator. A cylindrical unit in the center with an integrated regulation damper allows up to 80% of the exhaust gas to bypass the heating surface. Lasdpfxeqy Nv Rj Am Tjc The heating surface can be cleaned easily via optional soot blower rings using compressed air/steam/water, and/or by a pyrolysis process in dry-run mode