Plastic mold

ARBURG Allround 220-90-350

Condition: excellent (used), Year of construction: 2001, Arburg 470S 1300-350 Year of manufacture: 2001 injection unit: Screw diameter: 35 mm injection weight: 117 g Injection pressure: 2500 bar Metering volume: 139 ccm Clamping unit : clamping force: 130 t tie bar distance : 470x470 mm size of clamping platens: 650x650 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Hydraulic core pull x 1 Control with hot runners x 6 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection The built-in system for control of pressure quality from the brand Sensor Kistler - measurement of mold pressure type of injection unit: Vario - it offers the possibility to use the injection unit e.g. for lateral injection The new injection unit is installed in the machine Dimensions: Weight: 5100 kg Length/width/height: 4.45x1.49x2.17 m Drive: Pumps/motor: 22 kW Heating power: 10,2 kW Total power: 32,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Kdjlhswcna Rjcdw Iok Price: Upon request

Condition: good (used), Year of construction: 2001, operating hours: 56,380 h, Used injection molding machine The machine has a complete history with all important repair work and components replacement hoses etc. Manufacturer: Arburg Type: 420C 1300-350 Year of construction: 2001 Machine no. 184172 Control system: Selogica Operating hours: 56380 h constant maintenance by manufacturer clamping unit Clamping force: 1300 kN/ 130 tons Distance between tie bars: 420 x 420 mm Mold mounting platens: 570 x 570 mm Ejector stroke: 175 mm / 40 kN Opening stroke: 500 mm Tool installation height: 250 mm Distance between platens: 750 mm max. Injection unit Injection volume: 145 ccm Injection weight: 127 g Kjlsvimd Nohcdw Ijdk Cgu3U8W0U Screw diameter: 35 mm Injection pressure: 2500 bar Extras Hydraulic core pull - Available immediately from our warehouse in Hanover, free on delivery or free to your door against freight reimbursement - Functionally tested (guaranteed function until first commissioning)

Condition: good (used), Year of construction: 2001, Arburg 470 C 1300-350 (2001) Clamping force is 130 ton. Total weight is 5,1 ton. | ---|--- Screw diameter| 40 mm Tie bar spacing (H)| 470 mm Tie bar spacing (V)| 470 mm Shot volume| 182 cm³ Shot weight| 153 g Pressure on material| 2120 bar Platen length| 650 mm Platen width| 650 mm Robot interface| Number of cores| Kelhcsuy Ncmodw Ijdk Number of heating zones| Opening of the press| 850 mm

Condition: ready for operation (used), Year of construction: 2001, operating hours: 74,930 h, General Data Measurements width 1600 mm Measurements depth 4350 mm Measurements height 1800 mm Machine weight 4500 kg Injection Unit Screw diameter 40 mm Shot weight 166 g (PS) Injection pressure 2120 bar Clamping Unit Clamping force 1300 kN Opening stroke 500 mm Distance between bars 420 x 420 mm Mould height min 250 mm Size of mold platens 750 mm Kslov Utrdjhcdw Ijdk This Arburg Allrounder 420 C 1300-350 was manufactured in 2001. A robust injection moulding machine with a clamping force of 1300 kN and a screw diameter of 40 mm. It features a maximum shot weight of 166 g PS and an injection pressure of 2120 bar. Ideal for precise, large-scale production, the machine we have for sale represents a significant opportunity for efficiency. Contact us for further details regarding this injection moulding machine. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2003, Arburg 221 K 350 - 100 injection molding machine Year of manufacture: 12/2003 Horizontal/vertical machine - stand-up unit Control type: Selogica Closing system: Knee TECHNICAL DATA Closing force: 350 kN Clearance between columns: 221 mm Plate dimensions: 324 mm x 250 mm Mould size: min 150 mm - 300 mm Maximum opening stroke: 200 mm Max distance between plates: 350 mm - 500 mm Screw diameter: 20 mm Injection volume / Injection weight: 31 ccm / 26 grams PS Injection pressure: 2400 bar GENERAL DATA Engine: 7.5 kW Heaters: 3.5 kW Operating hours: approx. 47,000 h Dimensions L x W x H: 2.7 m x 1.4 m x 1.7 m Kolhcewa R T Iodw Iodk Weight: 1150 kg

Condition: good (used), Year of construction: 1999, Functionality: fully functional, Clamping cylinder removed from Arburg 420C 1000-350/150 Clamping force 1000 kN Kdelhcev T Niisdw Iek

Condition: excellent (used), Year of construction: 2001, Arburg 470S 1300-350 Year of manufacture: 2001 injection unit: Screw diameter: 35 mm injection weight: 117 g Injection pressure: 2500 bar Kelhswcna Decdw Isdk Metering volume: 139 ccm Clamping unit: clamping force: 130 t tie bar distance: 470x470 mm size of clamping platens: 650x650 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Hydraulic core pull x 1 Control with hot runners x 6 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection The built-in system for control of the pressure quality from the brand Sensor Kistler - measurement of the mold pressure type of injection unit: Vario - it offers the possibility to use the injection unit e.g. for lateral injection The new injection unit is installed in the machine Dimensions: Weight: 5100 kg Length/width/height: 4.45x1.49x2.17 m Drive: Pumps/motor: 22 kW Heating power: 10,2 kW Total power: 32,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: like new (used), Year of construction: 2007, operating hours: 47,800 h, Functionality: fully functional, machine/vehicle number: 203241, Used injection molding machine - New screw Kelovhb Iyjhcdw Ijdk with original Arburg Multilift H The machine has a complete history with all major repairs and component replacements such as the screw, cylinder, etc. (In addition, the annual oil and filter changes, etc., were of course performed.) See document for download Manufacturer: Arburg Type: 470C 1500-350 Year of manufacture: December 2007 Machine No. 203241 Control: Selogica Operating hours: 47,800 h Continuous maintenance by manufacturer Clamping unit Clamping force: 1500 kN/150 tons Tie-bar spacing: 470 x 470 mm Mold clamping platens: 650 x 650 mm Ejector stroke: 175 mm Opening stroke: 500 mm Mold installation height: 250 mm Clamping platen spacing: 750 mm max. Injection unit Injection volume: 145 cc Injection weight: 127 g Screw diameter: 35 mm Injection pressure: 2500 bar Extras Multilift H Handling interface Core puller - Available immediately from our Hanover warehouse, free on load or free to your door with freight reimbursement - Functionally tested (guaranteed functionality until first commissioning)

Condition: excellent (used), Year of construction: 2006, Arburg 470S 1300-350, year 2006 Injection Molding Machine, new hydromotor Clamping force 130 t Screw 35 mm Shot weight 127 g/PS Distance between colums 470x470 mm Effective screw length: 23 L/D Kslhsvi Rzxocdw Iodk Screw travel 145 max. mm Calculated stroke volume 139 max. cm3 Injection pressure 2500 max. bar Injection flow 128 3/s Back pressure positive/negative 350/160 Screw circumferential speed 47 max. m/min Screw torque 560 max. Nm - Nozzle bearing force 55 max. kN - Nozzle lifting stroke 300 max. mm - B x H 650 x 650 mm - Weight 5500 kg, L x W x H: 550 cm x 150 cm x 235 cm - in production untill 05/2024 Condition: fully funtional - Video available on request. 3x hydraulic core pull - system is in Czech language Machine has brand new hydromotor!

Year of construction: 2007, Condition: ready for operation (used), This Arburg Allrounder 820 S 4000-1300/350 was manufactured in 2007. It is a hydraulic injection moulding machine, ideal for precision and efficiency in plastic processing. Contact us for more information about this machine. Keljv T D R Ijhcdw Iedk Application Types Injection Moulding

Condition: reconditioned (used), Year of construction: 2000, Functionality: fully functional, 2000 Arburg projector. 130 tons of closing force. The machine is delivered completely reconditioned in our facilities in Heras (Cantabria). New gaskets in the sealing body. We can show it in operation. Technical details CLOSING POWER 1300 kN PLATE DIMENSIONS 660x840 OPENING STROKE 575mm MAXIMUM DISTANCE BETWEEN PLATES 800/850 DISTANCE BETWEEN COLUMNS 420x420/470x470 SPINDLE 50mm Kelerxtpdshcdw Isdk INJECTION VOLUME 353cm3 INJECTION WEIGHT 117 YEAR OF MANUFACTURE 2000 INJECTION PRESSURE 2500bar

Condition: good (used), Year of construction: 1999, Functionality: fully functional, Injection unit Type 350 Removed from Arburg 420C 1000-350/150 Screw diameter 40 mm Complete with Danfoss OTM 250 hydraulic motor, valves, etc. Kslhcjv Tp Irodw Ijdk

Condition: excellent (used), Year of construction: 2000, Arburg 370S 800-350 Year of manufacture: 2000 Injection unit: Screw diameter: 35 mm Injection weight: 117 g injection pressure: 2500 bar Metering volume: 139 ccm Clamping unit : clamping force: 80 t tie bar distance : 370x370 mm size of clamping platens: 570x570 mm Ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap Robot interface Hydraulic core pull x 2 Kdolowcmv Dshcdw Ijk Injection unit hardened - bimetal Built-in sorting flap Integrated lateral original Arburg sprue picker Dimensions: Weight: 3800 kg Length/width/height: 4.06x1.39x2.12 m Drive: Pumps/motor: 18.5 kW Heating power: 10,2 kW Total power: 28,7 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2000, operating hours: 46,000 h, Functionality: fully functional, machine/vehicle number: 180316, clamping force: 1,000 kN, screw diameter: 35 mm, clearance between the columns: 420 mm, Fully functional plastic injection molding machine with associated documentation and diskettes. Kjlhcdsv N D Raow Ijdk The machine operated in clean production. The machine was injection molded with LDPE material, so the tip and screw are in first-class condition. Every 2 years, the pressures were checked and confirmed by an Arburg authorized service.

Condition: used, Year of construction: 2006, Clamping force: 80 ton Screw dia: 40mm Kdolhcdwjuy Sdtj Isk Weight 3400 kg Machine used for Bakelite production (DUROPLAST)

Condition: ready for operation (used), Year of construction: 1996, General Data Machine weight 4000 kg Clamping Unit Kdslhsv T D Rbjcdw Iek Clamping force 1300 kN This Arburg Allrounder 420C 1300-350 was manufactured in 1996. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this Arburg Allrounder 420C 1300-350 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2003, Arburg 420S 800-350 Year of construction: 11.2003 Injection unit: Screw diameter: 50 mm Injection weight: 250 g Injection pressure: approx. 1300 bar Dosing volume: 288 ccm Clamping unit: Clamping force: 80 t Distance between tie bars: 420x420 mm Size of the clamping platens: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Kdolhcdwswcmvwe Iek Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Air valve x 1 Core pull control Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Integrated original Arburg side sprue picker Dimensions: Weight: 3800 kg Length/width/height: 4.06x1.39x2.12 m Drive: Pump/motor: 18.5 kW Heating output: 10.2 kW Total output: 28.7 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2006, Arburg 270 U 350-100U (2006) Universal machine / possible to use in horizontal, vertical position. Clamping force: 35 tons Distance between tie bars: 270 x 270 mm Platten dimensions: 380 x 380 mm Screw diameter: 25 mm Injection volume: 49 cm3 Shot weight (PS): 45 g Injection pressure: 2000 bar Equipment: Cores: 1+2 Heating zones: 3 Kdolhcsvdu Dgjdw Iek Low hours: 54.000

Condition: ready for operation (used), Year of construction: 2003, General Data Machine weight 3800 kg Kdjlhcdjv S Ncgow Iok Injection Unit Screw diameter 145 mm Clamping Unit Clamping force 800 kN Opening stroke Max. 450 mm Distance between bars 420 x 420 mm This Arburg Allrounder 420 S 800-350 was manufactured in 2003. A robust injection moulding machine featuring a closing force of 800 kN, opening travel max of 450 mm, and a distance between clamping plates of 750 mm. It has a clear column spacing of 420x420 mm and a net weight of 3800 kg. A great opportunity to buy this Arburg Allrounder 420 S 800-350 injection moulding machine. Contact us for further details. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 1996, Arburg 320M 750-90 Year of construction: 1996 Injection unit: Screw diameter: 25 mm Injection weight: 26 g Injection pressure: 2500 bar Metering volume: 31 ccm Clamping unit: Clamping force: 75 t Distance between tie bars: 320x320 mm Size of the clamping platens: 490x490 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MULTRONICA Additional equipment: Kdolhcdwewcmt Nj Iek Air valve x 1 It is possible to position the spraying unit vertically It is possible to change the screw diameter for fi 20, 30, 35 mm Dimensions: Weight: 2360 kg Length/width/height: 4.24x1.90x2.05 m Drive: Pump/motor: 15 kW Heating output: 4.6 kW Total output: 19.6 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: good (used), Year of construction: 2001, Clamping force: 25/35 tons Opening stroke: 200 mm Mould height: 150-300 mm Kdelhcdjuwr Dhjw Ijk Clamping platen daylight: 350-500 mm Tie bar daylight: 221 mm Mould clamping plattens (b x h) : 342 x 250 mm Ejector stroke: 60 mm Screw diameter: 30 mm Screw stroke: 100 mm Injection volume: 70 cm3 Shot weight: 59 g Injection pressure: 1040 bar Working hours: 40.882

Condition: ready for operation (used), Year of construction: 2005, General Data Measurements width 3750 Measurements depth 5750 Injection Unit Screw diameter 35 mm Stroke volume 139 ccm Injection pressure 2500 bar Clamping Unit Clamping force 130 kn Max open daylight 579 mm Distance between bars 470 mm Mould height min 273 mm Additional Equipment Wittmann W721-0130 extraction unit 4x temperature control units: HB-Therm Thermo 5 Epson robots for selection This Arburg Allrounder 470 S 1300-350 was manufactured in 2005. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this Arburg Allrounder 470 S 1300-350 hydraulic injection moulding machine. Contact us for more information. Kdjlhcdovucirsw Ijk Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2003, Arburg 320S 350-60 Year of construction: 07.2003 Injection unit: Screw diameter: 18 mm Injection weight: 18 g Injection pressure: 2500 bar Dosing volume: 20 ccm Clamping unit: Clamping force: 35 t Distance between tie bars: 320x320 mm Size of the clamping platens: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Air valve x 2 Hydraulic core pull x 2 Control unit with hot runners Hardened injection unit - bimetal Built-in pressure quality control system from Sensor Kistler - mold pressure measurement Kdelhewcmh Tecdw Iok Built-in sorting flap and conveyor belt Dimensions: Weight: 2150 kg Length/width/height: 3.32x1.21x1.81 m Drive: Pump/motor: 7.5 kW Heating output: 2.7 kW Total output: 10.2 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: ready for operation (used), Year of construction: 2004, General Data Measurements width 2600 mm Measurements depth 5100 mm Injection Unit Screw diameter 35 mm Stroke volume 139 ccm Injection pressure 2500 bar Clamping Unit Clamping force 130 kN Distance between bars 470 mm Additional Equipment Robot: Wittmann W621-1618 2x Temperature Control Units: HB-Therm Series 4 1x Temperature Control Unit: HB-Therm Thermo 5 Plus Peripherals Kdelhcjvtt Hrsdw Ijk General Data Measurements width 2600 mm Measurements depth 5100 mm Injection Unit Screw diameter 35 mm Stroke volume 139 ccm Injection pressure 2500 bar Clamping Unit Clamping force 130 kN Distance between bars 470 mm Additional Equipment Robot: Wittmann W621-1618 2x Temperature Control Units: HB-Therm Series 4 1x Temperature Control Unit: HB-Therm Thermo 5 Plus Peripherals This Arburg Allrounder 470 S 1300-350 was manufactured in 2004. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this Arburg Allrounder 470 S 1300-350 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2004, Arburg 320S 350-150 with the Wittmann W621 robot Year of construction: 2004 Injection unit: Kdolhswcmhmscdw Isk Screw diameter: 25 mm Injection weight: 49 g Injection pressure: 2500 bar Metering volume: 54 ccm Clamping unit: Clamping force: 35 t Distance between tie bars: 320x320 mm Size of the clamping platens: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 2 Control unit with hot runners Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Built-in pressure quality control system from Sensor Kistler - mold pressure measurement Original mold crane Robot Wittmann W621 Year of manufacture: 2005 5-axis robot: 3 axes are driven by servomotors (electric); axis B (rotation) and axis C Travel in axes: X-550, Y-1000, Z-1500 Touch control panel Robot with adapter Purchase of the robot for an additional charge Dimensions Weight: 2250 kg Length/width/height: 3.44x1.24x2.04 m Drive: Pump/motor: 18.5 kW Heating output: 9.4 kW Total output: 27.9 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request