Press brake

Amada

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length Dcedpfjw Iq Ugsx Abbog - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 4,000 rpm, travel distance X-axis: 245 mm, travel distance Z-axis: 210 mm, spindle motor power: 7,500 W, number of axes: 6, This 6-axis AMADA Wasino JJ3 was manufactured in 2007. It features a twin spindle, twin turret turning cell with a maximum spindle speed of 4000 rpm and a chuck size of 8”. The machine is designed for high-volume production with automatic loading and unloading capabilities. If you are looking to get high-quality turning capabilities, consider the AMADA Wasino JJ3 horizontal turning machine we have for sale. Contact us for further details. • Axes: X1, Z1, C1, X2, Z2, C2 • Travels: X1/X2 245 mm; Z1/Z2 210 mm • Spindles: 2 (double front spindle), max speed 4000 rpm, power 7.5 kW (option 11 kW), high-acceleration spindle • Turrets: 2 × 12 stations Dodpfjy Ndu Djx Abbjcg • Chuck size: 8" (3-jaw, both spindles) • Bed: High rigidity monoblock design • Cutting performance: • Turning (S45C): depth of cut 1.6 mm; feed 0.22 mm/rev; cutting speed 160 m/min • Drilling: Ø22 mm; feed 0.56 mm/rev • Tapping: M16 • Grooving: up to 8 mm • Precision: positioning accuracy ±2 µm; repeatability ±2 µm • Coolant/system: 290 L tank; filtration; high-pressure coolant pump • Cell concept/capability: automatic loading/unloading; fully automated; designed for unmanned, high-volume production • Driven tools: No • Condition: Good, properly working; regular maintenance since 2008 Additional equipment • Gantry loader with reverse turn unit • Work stocker: 2 units (expandable to 4) • Chip conveyor • Transformer • Integrated measuring unit (optional concept) • Cleaning unit (optional concept) Technical Specification Counter Spindle Yes Driven Tools No

Condition: used, Year of construction: 2004, operating hours: 26,000 h, functionality: fully functional, 2004 AMADA EM2510NT. The perforating machine is in good condition and has always been serviced on time by Amada service representatives. All documentation, service reports are included. Recently replaced bugno encoder. The machine is sold with software and tools. Perforating machine connected, available for testing, inspection. Specification: Year: 2004.07 Made in France. Operating time in hours: 26 426 Hours of power: 65 006 Software: Control unit: AMADA AMNC-F Perforating force: 20 tonnes Stations: 45 Tools: sold with tools Metal length: 2500 mm. Metal width: 1270 mm. Sheet thickness: 3,2 mm. Metal width change: 5000 mm. Workpiece weight: 150 kg. Dimensions: P 6080 x P 5120 x A2318 mm Dcsdpfxjt Hg Aco Abbsg Weight: 16 500 kg Location. Available for testing: Yes If you have any further questions, we will be happy to answer them.

Condition: ready for operation (used), Year of construction: 1991, Immediately available ex works: CNC press brake Amada Promecan Model HFBO 125/40 Year of manufacture: 1991 Control system renewed in 2024 Delem DA 58 control Dsdpfey N Adkex Abbscg Pressing force: 125 t Working length: 4200 mm Frame gap: 2700 mm Throat depth: 410 mm Stroke: 180 mm Drive: 11 kW Working speed: 8 mm/s Weight: 10 t Many tools included Price: EUR 10,500— plus VAT, ex works

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, operating hours: 8,650 h, control type: CNC control, laser hours: 8,650 h, laser power: 2,000 W, AMADA CNC Fiber Laser LCG-3015 AJ 2 kW Fiber skid table CT no.: 84561000 / Japan / no preferential origin AMNC Multi Media controller 2000 watt laser power AJ fiber laser Principle: flying optic 3-axis direct drive (X/Y/Z) oil shot function Including sensor cutting head Including lens quick-change system Including cutting lens 150, 190, 190 AX mm Including NC gas control Including NC focus control Including clean cut, high-pressure cutting Including aluminum cut function Including air purge system Including safety according to CE Including shuttle table PCLCG3015 Year of manufacture 04/2014 Dsdpfx Aeycf N Isbbocg

Condition: good (used), Year of construction: 2003, Amada HFP 100-3L (long stroke) 8-axis press brake Year: 2003 Tonnage: 100 tons Max. Bending length: 3110 mm Standard stroke: 350 mm Djdpfx Aovn S I Djbbscg Approach speed: 100 mm/sec Bending speed: 10 mm/sec Return speed: 100 mm/sec Weight: 7100 kg Dimensions Machine length: 4498 mm Machine width: 2450 mm Beam width: 60 mm Distance between side frames: 2705 mm Machine height: 2860 mm Open height: 620 mm CNC control type: AMNC Display: Touchscreen Akas laser protection Controlled axes: 8 axes, Y1, Y2, X1, X2, R1, R2, Z1, Z2 Documentation available Digipro angle measuring system Supplied with 1 set of tools

Condition: excellent (used), functionality: fully functional, Sheet width: 2,500 mm Sheet thickness: 4 mm Machine weight approx.: 5,000 kg Space requirement approx.: 3,000 x 2,000 x 1,700 mm Accessories/equipment: - Sheet holding device - Angle stop - 3x support arms - Foot switch Dcodpfsyz Rv Ejx Abbsg - Light barrier

Condition: good (used), functionality: fully functional, Sheet width: 4050 mm Sheet thickness: 8 mm Cutting angle: 2 - 10° Dcjdpfx Aboxu Nc Isbjg Cutting speed: 0.053 m/s Table length: 710 mm Machine weight approx.: 10,100 kg

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 41,569 h, machine/vehicle number: 77510200, control type: CNC control, controller manufacturer: Fanuc, controller model: AMNC 3i, laser type: CO₂ laser, laser source manufacturer: Fanuc, laser source model: C4000, laser power: 4,000 W, travel distance X-axis: 3,070 mm, travel distance Y-axis: 1,550 mm, Equipment: cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, On behalf of an authorized party, we are offering the following used item for sale by bid: Djdpfjy Iwixsx Abbecg Amada CO² Laser Cutting Machine Model FO-3015 NT II RI Laser Machine FO-3015 II RI Model: FOM2RI3015-C4 Operating hours: 41,569 h Laser specifications: 4,000 W CO2 Laser / Flying Optics Working area (X x Y): 3,070 x 1,550 mm Controller: AMNC 3i (21.5" screen size) Serial No.: 77510200 Year of manufacture: 2013 Including transformer TG513 Serial No. 987 Including cooler-extraction combination PC5011FOm24kw Serial No. 7196850001 LST3015 RI pallet changer for FOM23015RI LSTRI3015-CL Serial numbers: (30153398) Full demineralization unit type B5 Serial No. 31164908 with cartridge and conductivity meter Other condition notes: Last maintenance by Fanuc: 05.01.2023 at 38,095 h - Replacement of O-rings on the laser tube - Replacement of internal mirrors Turbo blower replaced at 24,000 h - Next replacement due at 48,000 h RI unit pneumatic valves partially leaking, inspection required Including various light barriers and a safety fence for the loading and unloading area Price is ex works/collection. The item is located in Erftstadt and must be collected by the buyer at that location. This offer refers exclusively to the described item. Other items possibly shown in the pictures may be part of a different offer. Errors subject to change. Inventory number: 2893-82

Condition: ready for operation (used), Year of construction: 2009, operating hours: 11,979 h, pressing force: 224 t, stroke length: 200 mm, overall weight: 17,100 kg, number of axes: 4, This 4-axis AMADA HFT 220-4 was manufactured in 2009. It features a maximum press force of 2200 kN and a maximum stroke of 200 mm, making it suitable for various bending applications. The machine comes with an extensive inventory of press brake tooling, including punches and dies stored in dedicated cabinets. If you are looking to get high-quality bending capabilities, consider the AMADA HFT 220-4 press brake we have for sale. Contact us for further details. • Noise level: < 75 dB(A) • Voltage: 400/415 V • Frequency: 50 Hz • Number of phases: 3 • Foreseen power: 20 kW • Nominal current: 351 A Additional equipment • Optional: Extensive inventory of press brake tooling (punches and dies) Dcjdjy E S Hyopfx Abbeg • Dedicated tool cabinets and racks for tooling Technical Specification Bending Length 4000 mm