Clamping plate with T-slots

Alu 1000/1000

Condition: used, Clamping plate with T slots, T-slot plate, clamping plate, plate field, -Mounting plate: T-slot plate aluminum -Clamping surface: 1000 x 1000 mm -Plate height: 25 mm -Groove width: 8 mm -Dimensions: see drawing in the photos -Total dimensions: 1000/1000/H25 mm -Weight: 64 kg Dpeylp

Overall weight: 1,000 kg, Maximum load weight: 740 kg, Axe configuration: 1 axle, Tire size: 13 Zoll, Condition: new, Machine/vehicle number: 8.221, Large exhibition in the Rhineland - 500 trailers in stock! Special offer only with us and always at the best price! Special offer price = BEST PRICE wm meyer motorcycle trailer braked low loader 2er motorcycle trailer buy at the best price in big showroom C&P Elsdorf wm meyer MOT 1025-151 Alu (274b) - 2500 x 1510 x 100 - 100 km/h possible Model: wm meyer MOT 1025/151 Alu 1000 kg braked - 100 km/h possible Dmlxih - Safety ball coupling with wear and safety indicator - Version with overrun brake + parking brake - Trailer with V-drawbar, galvanized - Quality axle, low-maintenance and galvanized, with rubber suspension for better handling - Sturdy jockey wheel - Lighting in light carrier in accordance with StVZO, with rear fog light and reversing light - Closed wooden floor covered with aluminum checker plate - 6 movable V2A fastening points in the floor-wall profile on the right and left - Aluminum drop sides on 3 sides (height: 100 mm) - 2 upright rails with bracket - 1 drive-on rail (length: 2,000 mm) - Corner stanchion holder for accessories (e.g. side wall elevation, tarpaulin structure) - 13-pin plug - Total weight: 1000 kg - Unladen weight: 260 kg - Payload: 740 kg - 13 inch tires - Internal dimensions L x W x H mm: 2500 x 1510 x 100 - Overall dimensions: 3780 x 2040 x 900 - Loading height mm: 800 Accessories at extra charge: - 100 km/h equipment - 120,- Euro - Wheel holder rocker 15 - 19 inch - 99,- Euro - Wheel holder rocker 13 - 21 inch - 159,- Euro - 2 pairs of wheel chocks with holder - 10,- Euro - Anti-theft device depending on version - 25,- to 35,- Euro - Rear stabilizers with bracket - 45,- Euro - Aluminum dropside attachment 350 mm removable - 690,- Euro - Tarpaulin & bows on dropside extension, internal height approx. 1400 mm - 799.00 Euro Experience a gigantic selection of quality and price in one of the largest trailer distributors in Germany with more than 500 trailers permanently in stock! CAR TRAILER SALES CENTER + RENTAL PARK ELSDORF Over 200 RENTAL TRAILERS! Over 500 trailers on 8,000 m² of exhibition space! major exhibition in the rhineland! Free show and viewing on Sundays and public holidays from 12.00 - 18.00 (No sale - no consultation) Pictures may include accessories at extra cost. BEST PRICES CLEMENS & PARTNER ELSDORF

Condition: good (used), 1) Used carbide circular saw blade for sawing aluminum Article: 100040180 TFZ neg (GEBR-B1) Application: Long cut circular saw Note: little used, top condition Technical description: ● Diameter 1000 mm ● Mounting hole 40 mm ● Teeth 180 ● Tooth shape trapezoidal flat tooth negative (TFZ neg) ● Cutting width 7 mm Dpbkxb ● Master blade 6 mm ● Thickness of carbide tooth approx. 3 mm ● Secondary holes 2 pieces, pitch circle 80 mm, ø 13 mm 2) Used carbide circular saw blade for sawing aluminum Article: 100040180 TFZ neg (GEBR-B2) Application: Long cut circular saw Note: little used, top condition Technical description Diameter 1000 mm ● Mounting hole 40 mm ● Teeth 180 ● Tooth shape trapezoidal flat tooth negative (TFZ neg) ● Cutting width 7 mm ● Master blade 6 mm ● Thickness of carbide tooth approx. 3 mm ● Secondary holes 2 pieces, pitch circle 80 mm, ø 13 mm 3) Used carbide circular saw blade for sawing aluminum Article: 80040160 TFZ neg (GEBR-B3) Application: Long cut circular saw Note: little used, top condition Technical description Diameter 800 mm ● Mounting hole 40 mm ● Teeth 160 ● Tooth shape trapezoidal flat tooth negative (TFZ neg) ● Cutting width 6 mm ● Master blade 5.5 mm ● Thickness of carbide tooth approx. 2.8 mm ● Secondary holes 2 pieces, pitch circle 80 mm, ø 13 mm 4) Used carbide circular saw blade for sawing aluminum Article: 99040180 TFZ neg (GEBR-B2) Application: Long cut circular saw Note: little used, top condition Technical description Diameter 990 mm ● Mounting hole 40 mm ● Teeth 180 ● Tooth shape trapezoidal flat tooth negative (TFZ neg) ● Cutting width 7 mm ● Master blade 5.5 mm ● Thickness of carbide tooth approx. 3.7 mm ● Secondary holes 2 pieces, pitch circle 80 mm, ø 13 mm

Condition: new, Year of construction: 2024, Functionality: fully functional, Machine/vehicle number: SÇ 1000 DİJİTAL METRE, - 3 Meter length - +/- 0.1 mm measurement accuracy - 220 Volt voltage Nno908Gdij - Touch screen - One-button push-back feature that allows the cut product to be easily removed from the mold - Design for ease of use - Easy calibration

Condition: as good as new (ex-display), Year of construction: 2024, Tip height 181 mm chip width 1000 mm largest grindable workpiece diameter 360 mm max. load on the fly 1000 N 100kg max load between centers 3000 N 300kg Z-axis Table inclination 10 degrees Table drive hydr. 0-4 m/min X-axis Adjustment path of the infeed spindle 80 mm Rapid traverse (hydraulic) 50 mm Coarse adjustment travel air cushion 280 mm Infeed drive by DC motor Rapid traverse speed 48 mm/min/Ø Infeed process Grooving Longitudinal grinding 4 preselectable speeds mm/min/Ø 0.01-48 4 preselectable infeed rates mm/ 0.001-0.1 Firing during infeed grinding s 0-99 0-99 strokes Rqg37H8Cev Jog infeed mm/Ø 0.001 Grinding headstock Universal, swiveling degrees 0-180 Grinding wheel:Outer D x w x d mm 500x100x127 or 203.2 Grinding wheel.face (option) D mm 250x32x76.2 Grinding wheel. Internal (option) D mm (2-250) Drive power: External, flat kW 5.5 (7.5) Drive power: Internal kW 2.2 Peripheral speed: Outer m/s 35 (50) Grinding wheel wear: Outer mm/Ø 160 Guard width mm 100 Grinding spindle diameter mm 60 Internal spindle mount mm 80 (100) Workpiece headstock: Drive infinitely variable: Mk 4 1/mm 30-270/ 50-450 Workpiece spindle can be fixed Spindle holder mm MK 4/24 Spindle nose for flange mounting: MK 4 mm cylindrical Ø63H6 x 6 Workpiece headstock can be swiveled on turning part degrees 0-90 Tailstock: Quill holder/ quill diameter mm MK4750 Quill stroke mm 45 Quill force N 100-800/ 250-1400 adjustable Manual quill actuation (foot switch) Quill fine adjustment +- 40µ Connected loads: Total connected load of the machine kW 6.5 -10 Grinding headstock kW 5.5 (7.5) Workhead kW 0.55 (1.1) Coolant cleaning kW 0.75 - 2.2 Lubrication pump guideways kW 0.1 Hydraulic pump kW 1.5 Hydraulic reservoir liter 80 Pneumatics bar 6

Condition: new, New never used aluminum rods for trolleys 800pcs avaliable Dpfgdp

Condition: new, Year of construction: 2023, Travel distance X-axis: 10,000 mm, Travel distance Y-axis: 3,200 mm, Travel distance Z-axis: 1,600 mm, Heidenhain / Siemens control Water-cooled inline motor 43 kW / 900 Nm Travels: X= 4,000 - unlimited Y= 2.600 / 3.200 Z= 1.600 Milling heads: 2.5°x2.5° / 1°x1° / 0.001°x0.001 / quill Further equipment: Tool changer 40 / 60 / 80 / 100 NC tables Plate fields Carousel rotary tables Chip conveyor Fully automatic milling head changing system Pendulum machining Splash guard cladding B9T7Tl9L Operator-supporting technology packages

Condition: good (used), Year of construction: 2002, Functionality: fully functional, USED SORALUCE SORAMILL MODEL SP 10000 TRAVELLING COLUMN, TABLE TYPE CNC MILLING CENTRE, WITH AUTOMATIC OIL MIST LUBRICATED ORTHOGONAL MILLING HEAD WITH 1 X 1 DEGREE INDEXING AND HEIDENHAIN TNC 430 M CONTROL SYSTEM. YEAR 2002 Sn 8647 Bmdatpedsgo Table Area 10000 x 1100 mm Column Traverse (X) 8500 mm Vertical Traverse (Y) 1600 mm Ram Traverse (Z) 1200 mm Spindle Motor 28 kW Spindle Taper. Standard ISO 50 BT50 tooling Pullstud DIN 6987 2-Form A. ISO 7388/2-Form A Independent Gearbox with 2 Ranges Speed Range 20 to 4000 RPM Feed Range 5 to 5000 mm/min Rapid traverse rate (X, Y, Z) 15,000 mm/min Preloaded double nuts and recirculating ballscrews to each axis. Linear Guiding System with recirculating cylindrical rollers and steel guideway assemblies in X, Y and Z axes Independent A.C Drive motor to each axis. Linear Transducer in X, Y and Z-axes with air purge system. Automatic tool clamping. Automatic hydraulic tool releasing device. CNC Control HEIDENHAIN TNC-430-M. (Flat TFT screen with digital drives) 9 axes CNC and 1 spindle, 5 of them simultaneously interpolated. Working area lighting. Electrical cabinet cooling system Electrical cabinet lighting Heidenhain HR410 portable electronic handwheel with 3m spiral cable Horizontally articulated pendant for CNC control Orthogonal head 28KW, 800Nm, 1deg x 1 deg, 4000rpm oil lubricated Price includes oil cooling unit for both head and gearbox. Option G2, Ram prepared for 4000rpm, is also included. Coolant through the spindle type AD. Coolant system with 500l capacity tank with two pumps providing low and high pressure of 3 and 8 bars and 50l/min flow. The system includes a combined paper and magnetic drum-filtering unit. Standard operators platform fixed to the column 40 tools capacity toolchanger magazine, BT50 Max. Tool length = 400 mm. Max. Tool diameter: - With full magazine = 120 mm. With adjacent position empty = 250 mm. Max. Tool weight = 20 kg. Mean tool weight with full magazine = 10 kg. Max. Permitted total weight = 20 kg. Swarf Conveyor Hinge type conveyor belt Machine preparation for the addition of a 4th axis electro-mechanical table. Splash Guarding against swarf at the table front and both sides. Consists of four sliding front doors with a height from the floor of 2.100mm and a length of 1.700mm each one. Manually operated opening and closing with mechanical interloc The doors can be opened for the full longitudinal traverse. The rear of the table is open. Protection in the back and both lateral sides of the machine column.

Year of construction: 2023, Condition: new, Machine/vehicle number: EPRI760-10000, We offer new scissor roller conveyors with sensors for sale. technical data: Re2Yl Roll width 760mm Length retracted 3900mm Length extended 10000mm Height 690-1000mm Load capacity 130kg/m Available quantity: 18 Shipping possible. Please contact us if you are interested.

Condition: new, Year of construction: 2019, Accessories: We9Gct27 Orbiweld TP600 mit drahtzuführun 70-170mm Orbiweld TP1000 mit drahtzuführun 120-275 Orbimat P16 Rohrend Schweiße

Condition: new, Year of construction: 2023, Longitudinal x 10000 mm Vertical Y 2200 mm transverse Z 1300 mm tool holder ISO 50 Control Heidenhain TNC 640 Bsppvqqof3 milling head 2,5° 6000 rev. IKZ changer 60 pockets panel field 11000 x 2500 x 300 mm

Year of construction: 2023, Condition: new, Machine/vehicle number: EPRI610-10000, We offer new scissor roller conveyors with sensors for sale. Roll width: 610mm Length retracted: 3900mm Length extended: 10000mm Height 690-1000mm Load capacity 130kg/m Available quantity: 14 pieces Other lengths available from stock. Please contact us if you are interested Rfaol Shipping worldwide

Overall weight: 1,000 kg, Empty load weight: 225 kg, Maximum load weight: 775 kg, Loading space volume: 1.6 m³, Loading space length: 2,050 mm, Loading space width: 1,050 mm, Loading space height: 650 mm, Color: silver, Condition: new, Construction height: 1,320 mm, Working width: 1,570 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * TECHNICAL DATA - Make: Koch trailer - Model: B1000 - Vehicle type: Cover trailer - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (L x W x H): 205 x 105 x 65 cm - External dimensions (L x W x H): 306 x 157 x 132 cm - Loading height of floor: 50 cm - Perm. Total weight: 1,000 kg - Unladen weight: 225 kg - Payload: 775 kg - Chassis: Low loader (wheels next to the body) - Tires: 185/70R13 - Chassis: ALKO rubber spring axle - Support wheel: Yes - 100km/h approval: Yes EQUIPMENT - Brakes: Yes - Number of axles: 1 - Floor: Aluminium floor - Drop sides: Anodized aluminium, double-walled - Drop side height: 60 cm - Drop sides foldable: Rear drop side - Drop side hinges: 2 at the rear, bolted - Drop side elevations: 1 - Locks: Eccentric locks - Railing: Yes - Number of pallet spaces: 1 - Lid: Yes - Lid stop side: Front - Lid load: Heavy-duty, on the railing - Rear opening with lid closed: No - Bicycle carrier / lid: No Bicycle carrier / surf rack: Optional, can be retrofitted - Overrun device/brake: ALKO - Frame/chassis: Steel side member, bolted - Galvanization: Hot-dip galvanized - Drawbar: Tubular drawbar - Drawbar length: 95 cm - Mudguards: Steel mudguards - Rear doors / tailgate: Tailgate - Load ramps: - - Drive-on angle: - - Supports: Optional, can be retrofitted - Lashing eyes: 4 - Rear lighting: bulbs, lamps recessed in rear frame - Side lighting: - - Plug for lighting: 13-pin - Vehicle documents: ZBII & COC papers DESCRIPTION - Dropside height 60 cm + lid height 5 cm - Double-walled anodized aluminium dropside 30 mm, with integrated aluminium frame - Dropside with load securing system Accessories such as, lashing eyes can be easily fitted without drilling. - Stainless steel lashing rings (V2A stainless steel) - Full aluminum floor - Complete aluminum floor with ribbed surface. This means the floor lasts almost forever. - Very sturdy latches for the tailgate made of V2A stainless steel (unique) - Lid can be opened from the rear - 2 sturdy V2A stainless steel hinges at the front - Sturdy aluminum lid with aluminum corrugated cover plate can be walked on - 8 mm V2A screw connection - Sturdy lid railing - Optional cross member set can be mounted on railing - Sturdy V2A lid lock at the rear with disc lock - 2 gas springs for easy opening - Lid can be easily removed - Maintenance-free hot-dip galvanized rubber spring axle - Chassis and drawbar from renowned manufacturer ALKO - Safety indicator on the coupling - Steel mudguards - Tailgate can be easily removed - 13-pin plug - Reversing lights - Large reversing lights plug - reversing light - large safety lighting - integrated rear fog light - lighting recessed in the rear frame - equipped with balanced 1A brand tires as standard - large 185/70R13 tires balanced and 100 km/h capable - M8 stainless steel (V2A stainless steel) screw connection - clear operating sign with the most important data (tire pressure, cable assignment...) - Includes 10-year Koch warranty Accessories can be retrofitted on request: - Rear supports, the pair - Anti-theft device - Cross carrier for bike racks, surfboards and similar available. - much more New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately avail Cs7Nidyj00

Overall weight: 1,000 kg, Empty load weight: 240 kg, Maximum load weight: 760 kg, Loading space volume: 1.8 m³, Loading space length: 2,050 mm, Loading space width: 1,050 mm, Loading space height: 800 mm, Color: silver, Condition: new, Construction height: 1,470 mm, Working width: 1,570 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * Technical data: - Type: new vehicle - Availability: immediately!!! - TÜV: 2 years from first registration - Floor: all-aluminum floor - Gross vehicle weight: 1,000 kg - Unladen weight: 240 kg - Payload: 760 kg - Interior dimensions: 205 x 105 x 80 cm (L x W x H) - Exterior dimensions: 306 x 157 x 147 (L x W x H) - Loading sill height: 50 cm - Tires: 185/70R13 - Brakes: yes - Support wheel: included - 100km/h: INCLUDED !!! - incl. vehicle documents (letter) Standard equipment: - Double-walled anodized aluminium dropsides 30 mm, with integrated aluminium frame - Dropside with load securing system Accessories such as lashing eyes can be easily mounted without drilling. - Stainless steel lashing rings (V2A stainless steel) - Sturdy screen-printed floor plate, non-slip (birch wood, waterproof glued) - Very sturdy locks for the tailgate made of V2A stainless steel (unique) - Maintenance-free, hot-dip galvanized rubber spring axle - Chassis and drawbar from renowned manufacturer ALKO - Safety indicator on the coupling - Steel mudguards - Tailgate can be easily removed - 13-pin plug - Reversing lights - Large reversing light - Steel mudguards plug - reversing lights - large safety lighting - integrated rear fog light - lighting recessed in the rear frame - fitted with balanced 1A brand tires as standard - M8 stainless steel (V2A stainless steel) screw connection - clear operating sign with the most important data (tire pressure, cable assignment, etc.) - incl. transfer costs - incl. vehicle registration document Special equipment included in the price: - Full aluminum floor - Complete aluminum floor with ribbed surface. This means the floor lasts almost forever. - Side wall height 75 cm + lid height - Sturdy aluminum lid with aluminum corrugated deck plate walkable - Sturdy lid railing - Indestructible lid lock with discus lock - Lid is easy to remove - 2 x gas spring for easy opening and closing - Crossbars for bicycle racks, surfboards and the like are available on request. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! For more than 30 years we are Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Specialized dealer & repair workshop - Delivery throughout Germany possible with surcharge! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved - Dpp2Tj

Overall weight: 1,000 kg, Empty load weight: 240 kg, Maximum load weight: 760 kg, Axe configuration: 1 axle, Loading space length: 2,050 mm, Loading space width: 1,050 mm, Loading space height: 800 mm, Color: silver, Condition: new, * AVAILABLE IMMEDIATELY incl. 10 year manufacturer's warranty!!! Technical data: - Type: New vehicle - Availability: immediately! - TÜV: 2 years from first registration - Floor: Full aluminum floor - Permissible total weight: 1,000 kg - Unladen weight: 240 kg - Payload: 760 kg - Interior dimensions: 205 x 105 x 80 cm (L x W x H) - Loading sill height: approx. 50 cm - Tires: 185/70R13 - Brake: yes - Support wheel: included - 100km/h: INCLUDED !!! - incl. vehicle documents (letter) Standard equipment: - double-walled anodized aluminium drop sides 30 mm, with integrated aluminium frame - Dropside with load securing system Accessories such as lashing eyes can be mounted without drilling. - Stainless steel lashing rings (V2A stainless steel) - Sturdy screen-printed floor plate, non-slip (birch wood, waterproof glued) - Very sturdy latches for the tailgate made of V2A stainless steel (unique) - Maintenance-free, hot-dip galvanized rubber spring axle - Chassis and drawbar from renowned manufacturer ALKO - Safety indicator on the coupling - Steel mudguards - Tailgate easily removable - 13-pin plug - reversing lights - Large dimensioned safety lighting - Integrated rear fog light - Lighting recessed in the rear frame - Fitted with balanced 1A brand tires as standard - M8 stainless steel screw connection (V2A stainless steel) - Clearly arranged control plate with the most important data (tire pressure, cable assignment...) - Incl. transfer costs - Incl. vehicle registration document Special equipment included in the price: - Full aluminum floor - Complete aluminum floor with ribbed surface. This means the floor lasts almost forever. - Side wall height 75 cm + lid height - Sturdy aluminum lid with walk-on aluminum corrugated top plate - Sturdy lid railing - Indestructible lid lock with discus lock - Lid is easy to remove - 2 x gas springs for easy opening and closing Mjp7Wu0B - Crossbars for bicycle racks, surfboards and the like are available on request. You can pay in cash or by bank transfer before collection.

Condition: used, Suspension crane runway Crane system made of aluminum system profile similar to GIS GISKB ALU, EEPOS, KITO ProSystem, ERIKKILA No DEMAG but similar to KBK Overhead monorail system with single girder crane bridge Light crane system made of aluminum system profiles Load capacity: 125 kg Span: 3.2 meters as single girder bridge Profile height: 155 mm Profile width: 100 mm - Natural anodized aluminium profiles - Carriage with smooth-running plastic rollers - Power supply via trailing cable on the wire rope Consisting of: 2 pieces of 4.8 meter aluminum system profile for the longitudinal track with 3 suspension eyelets each 1 piece of 3.35 meter aluminum system profile for the crossbeam (single girder bridge) with 2 suspension eyelets 1 trolley for crane suspension on the crossbeam 1 carriage on the longitudinal beams (2 pieces) 6 end covers suitable for the profile rails Weight of profile rails: 125 kg Very good condition, as good as new Cnjhn8Ah3E Hoists can be found in our WebShop under the search term "chain hoist" You can find suitable assembly material in our WebShop under the search term "KBK"

Condition: excellent (used), Year of construction: 2004, WEMAS VZ 1000 - Control Heidenhain iTNC 530 - Year of construction 2004 - Tool measurement Tool Eye - Coolant supply - Chip tray Working area: - Travel X-1000mm , Y-600mm , Z-650mm Main spindle: - Spindle speed max. 8000 rpm. - Tool holder SK 40 Table: - Clamping surface 1300 x 600mm - Table load 1300kg Uduaqil3Yb Tool changer: - 20 magazine positions

Year of construction: 1995, Condition: used, Transport trolley made of aluminium / VA Year of manufacture 1995 Technical data: Floor area 1650 x 625 mm E9Elacolc Number of shelves 1 Outside dimensions 1750 x 630 x 1550 mm with: - 2 fixed and 2 movable castors - Handles - Sheets made of VA used, in good condition

Condition: good (used), In this offer you acquire a used 5-colour production system "Xerox 1000 Colour Press". Item for sale: 1 x Xerox 1000 Colour Press with the following equipment: incl. 5th colour (gold/silver) incl. Paperdeck JCF-1 incl. booklet finisher LFN-7 incl. stacker incl. FreeFlow print server, license expired Meter readings: Total: Approx. 18,613,184 pages Colour: Approx. 16,590,986 pages Black: Approx. 2,022,198 pages Condition: This is a used machine and may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The machine has been tested for function A test printout can be seen in the photo Please note the FreeFlow licence agreements Q38Ox Packing and shipping: You are welcome to view the unit during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! Before shipment or collection, a function test will be recorded for you on video. For more information, you can of course also contact us personally.

Condition: new, 3 pcs. Buy Hymer ALU-PRO stepladder, pallet goods Dptmst - Brand: Hymer - Model: ALU-PRO 7102607 - Number of steps: 7 - Material: aluminum, plastic - with platform - Condition: new, A-goods

Condition: new, max. width of grinding wheel 145 mm diameter / bore of grinding wheel 300 mm Flange taper Reishauer 0 Citrus8Me8 grinding wheel size 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 2,5 EW20° 3GG Cubitron from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools

Condition: good (used), In this offer you acquire a used colour production system "Xerox 1000 Colour Press". Item for sale: 1 x Xerox 1000 Colour Press with the following equipment: incl. Fiery EX1000 (QX100-07) incl. Finisher A-GW01 + LCS-1 incl. Paperdeck JCF-1 incl. 5 colour transparent Meter readings: Total: Approx. 3,661,919 pages Colour: Approx. 2,892,248 pages Black: Approx. 769,671 pages Condition: This is a used machine and may show signs of use (minor scratches or yellowing). The machine has been tested for function A test printout can be seen in the photo Packing and shipping: You are welcome to view the unit during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! Before shipment or collection, a function test will be recorded on video for you. Cp0Vnvfpvr For more information, you can of course also contact us personally.

Condition: new, max. width of grinding wheel 145 mm diameter / bore of grinding wheel 300 mm Flange taper Reishauer 0 grinding wheel size 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 1,5 EW20° 3GG from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance Dpmm3Z - Significantly higher sanding parameters than with standard tools

Condition: new, max. width of grinding wheel 145 mm diameter / bore of grinding wheel 300 mm Flange taper Reishauer 0 grinding wheel size 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 2,25 EW20° 3GG from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle Citqwzizuu EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools

Condition: new, max. width of grinding wheel 145 mm diameter / bore of grinding wheel 300 mm Flange taper Reishauer 0 grinding wheel size 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc Dpmm3P T1SP 300x145x160 M 2,5 EW20° 2GG Cubitron from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools