Plate rolling machine

AKYAPAK AHS 25/16

Year of construction: 2009, condition: good (used), machine/vehicle number: 120P1109, OFFER 21407 Mot. tank-boiler turning device with rail trolley Technical data: - Total payload driven + travelling unit 40000 kg. - payload per vessel device 20000 kg - workpiece diameter approx. 500 - 3500 mm Dodpfjhcnhmex Adwjur - Centre distance of the support rollers adjustable via trapezoidal thread spindle - roller diameter 500 mm - roller width 150 mm - driven unit with drive on both sides - infinitely variable rotational speed - manual remote control for Re- and Li.-run - drive 400 V - Both units are mounted on rail trolleys - space requirement with running unit approx. W 3800 x H 1150 x D 1350 mm - Space requirement with running unit approx. W 3600 x H 1150 x D 1350 mm - Weight attached unit approx. 2500 kg - Weight with running unit approx. 1800 kg

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: MG, controller model: 4-AXIS, number of rollers: 4, roller (bottom) diameter: 245 mm, roller (top) diameter: 265 mm, side roll diameter: 185 mm, roller diameter: 280 mm, roller length: 2,550 mm, working width: 2,500 mm, working height: 700 mm, sheet thickness (max.): 14 mm, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 10 mm, overall weight: 7,500 kg, total length: 4,200 mm, total width: 1,500 mm, total height: 1,600 mm, power: 18 kW (24.47 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 3, Equipment: centralized greasing system, cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4roll plate bending machine 2500 X 12 mm with central support hydraulic for large diameters and side arm plate support Capacity plate width 2500 mm Plate thickness 12 mm Prebend 10 mm Upper roll 265 mm Lower rolls 245 mm Surface useful on rolls 2550 mm Power supply 380/50 Electric motor 15 Kw on hydraulic unit Configuration Hardened rolls very high surface resistance Conical bending attachment Digital position readout of the rollers Safety and emergency installed per norms Hydraulic rolls power driven with planetary gear unit Hydraulic motion of rollers individual with dual initial pre-pinch Open front drop-end hydraulic to unload the closed shells Dusdpfx Aexw S Eqjdwor Central support vertical hydraulic operated for large diameters Side arm operated hydraulic support Total weight of the machine 7500 Kg machine layout 4200X1500 X H1600 mm

Condition: used, Year of construction: 2002, fuel type: gas, Number of working hours 3184 h weight max. 8 t weight of the machine ca. 13400 kg Duedjwx R T Ejpfx Adwer

Condition: used, Power source for orbital welding machine MESSER GRIESHEIM - POLYSOUDE PS204 Dedpfx Ast Awm Djdwour Water cooling unit for orbital welding machine MESSER GRIESHEIM - POLYSOUDE RC200 Welding power source, inverter welding machine POLYSOUDE PS 204 + RC 200 Year of manufacture: 1997 Power source serial no.: 9885186 Cooling unit serial no.: 97861? Output: 200 amps = 20% duty cycle 90 amps = 100% duty cycle Power supply: 230 volts, 50 Hz, Schuko plug - Remote control cable type BP 1436 with 7.5 m connection cable - Adjustable output from 1 to 200 amps - DC only - HF ignition - Cooling water unit for torch cooling - 44,895 operating hours (read) - Operating and maintenance manual included Space requirements welding machine (L x W x H): 550 x 360 x 500 mm Space requirements cooling unit (L x W x H): 550 x 360 x 550 mm Weight welding machine: 45 kg Weight cooling unit: 25 kg Good condition Sold without accessories The price refers to a set consisting of 1x power source and 1x water cooler.

Condition: excellent (used), Year of construction: 2012, Technical Data: Working width: 2600 mm Bending capacity: 20.0 mm Pre-bending: 16.0 mm Top roll diameter: 330 mm Middle roll diameter: 300 mm Side rolls diameter: 240 mm Conical bending device via tilting of both side rolls Mobile control panel with digital display Motor power: 11 kW CE mark Dimensions (L x W x H): approx. 5800 x 2300 x 1900 mm Weight: approx. 11 t Duedpfx Aex Ii Hvodwer Additional equipment: Upper bending aid The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: as good as new (ex-display), Year of construction: 2007, I - beam section - flat steel 50 x 10 mm I-beam section - upend 80 x 15 mm L-beam 50 mm round material 30,0 mm bar material dia. max. 1 1/2" mm bar material - diameter 30,0 mm weight 0,185 t range L-W-H 670 x 530 x 1350 mm square material 40 x 40 x 3 mm pipes 60 x 2,0 mm total power requirement 0,75 kW Demonstration device Equipment: • Base frame of the machine • Foot switch • Standard-rolls (divided) • Possible to bend horizontally and vertically Dedst U R H Ujpfx Adwjur

Condition: new, Year of construction: 2023, Container turning device 3000 Kg load capacity with hand and foot remote control speed infinitely variable 120 to 1200 mm / min. diameter from 50mm to 3000mm Wheel size diameter 300mm x 50 Dodjlypunspfx Adwsur dimensions per piece approx. 1680 mm x 550mm

Condition: excellent (used), Year of construction: 2014, sheet width 2600 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 220 mm side roll diameter ~ 170 mm diameter of lower rolls ~ 190 mm Control konv. oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight ca. 5000 kg Dimensions (only the machine) ca. 3500 x 1550 x 1400 mm very good condition (!!) current new price incl. accessories approx. 120.000 Euro special price on request Equipment: - robust electro-hydraulic 4-roll round bending machine - 4-roll concept offers a wide range of bending and rounding options - Swivel-mounted control unit * Operation - control of all rollers or machine axes * Digital position display of the side rollers * Manual operation via JOY sticks - Two central rollers are driven directly via hydraulic motors - Conical rolling possible by tilting the rollers - Parallelism of the side rollers via torsion shafts - Bending on both sides - diameters of up to 1.1 times the top roller diameter are possible - Forged and hardened rollers with a hardness of 53-55 HRC - Low-maintenance, stable machine concept - Permanent lubrication of all bearings - Sturdy welded steel construction - electro-hydraulic hinged bearing for easy pipe removal - pressure gauge / pressure display for the rollers - Safety device (safety line with switch unit) - operating instructions * Special accessories included : - ROCCI height-adjustable center support * for large pipe diameters - ROCCI electro-motorized material feed table Duedpfeylpz Hox Adwer * motorized sheet feeding material support surface

Condition: like new (used), Year of construction: 2024, As-new polishing machine OPTIMUM OPTIpolish GZ40P with variable-speed conversion featuring Siemens inverter and cyclone extraction system. For polishing wheels with a diameter of up to 350mm, maximum wheel width 35mm, wheel bore 20mm. Suitable for continuous and intensive industrial use. Heavy-duty industrial polishing machine; its high dead weight absorbs the already minimal vibrations. Maintenance-free, long-life induction motor with smooth operation, cast iron housing. Duedpfx Ajyglkyjdwsr Additionally equipped with: Variable speed drive using Siemens Sinamics V20 inverter. Circumferential speed adjustable from 34 m/s down to 6 m/s. Sturdy base with cyclone extraction integrated in the base, thus requiring minimal space. Sound-insulated. The base must be filled with concrete by the customer. Automatic start/stop feature: When the external device is powered on or off, the extraction system automatically switches on or off with a 2-3 sec delay. There is no need to operate the extraction system separately. According to hazardous substance regulations, residual dust is extracted after the machine shuts down. The machine is located at 71334 Waiblingen-Beinstein and can, of course, be inspected by appointment. Please contact us for further information.

Condition: excellent (used), Year of construction: 2009, Technical data: Working width: 2600 mm Bending capacity: 16.0 mm Pre-bending: 12.0 mm NC control Upper roller diameter: 330 mm Middle roller diameter: 290 mm Side roller diameter: 270 mm Conical bending device via inclined positioning of the side rollers Dujdeyg Eulopfx Adwjr Mobile control panel with digital display Motor power: 11 kW CE mark Dimensions (length x width x height): approx. 5100 x 2100 x 1800 mm Weight: approx. 12 tons The seller is not liable for typographical or data transmission errors. The machine's condition, both visually and technically, as well as wear, is in accordance with its age; used machines are sold without any warranty.