Plate Bending Machine - 4 Rolls
ROCCIA HR4WE 2510

Name: ROCCIA HR4WE 2510
Brand: ROCCIA
Availability: InStock

Year of construction

2014

Condition

Used

Location

Ahaus

Plate Bending Machine - 4 Rolls ROCCIA HR4WE 2510

Show map

Machine data

Machine type:: Plate Bending Machine - 4 Rolls

Manufacturer:: ROCCIA

Model:: HR4WE 2510

Year of construction:: 2014

Condition:: excellent (used)

Price & Location

Location:: 48683 Ahaus

Call

Details about the offer

Listing ID:: A212-79417

Reference number:: 1125-9401303

Update:: 20.02.2026

Description

sheet width 2600 mm
plate thickness 10.0 mm ST
pre-bending 8.0 mm ST
diameter of upper rolls ~ 220 mm
side roll diameter ~ 170 mm
diameter of lower rolls ~ 190 mm
Control konv.
oil volume 80.0 Liter
voltage 380 V
total power requirement 5.5 kW
weight ca. 5000 kg
Dimensions (only the machine) ca. 3500 x 1550 x 1400 mm
very good condition (!!)
current new price incl. accessories approx. 120.000 Euro
special price on request

Equipment:
- robust electro-hydraulic 4-roll round bending machine
- 4-roll concept offers a wide range of bending and rounding options
- Swivel-mounted control unit
* Operation - control of all rollers or machine axes
* Digital position display of the side rollers
* Manual operation via JOY sticks
Gbsdpsylpz Hjfx Afzok
- Two central rollers are driven directly via hydraulic motors
- Conical rolling possible by tilting the rollers
- Parallelism of the side rollers via torsion shafts
- Bending on both sides
- diameters of up to 1.1 times the top roller diameter are possible
- Forged and hardened rollers with a hardness of 53-55 HRC
- Low-maintenance, stable machine concept
- Permanent lubrication of all bearings
- Sturdy welded steel construction
- electro-hydraulic hinged bearing for easy pipe removal
- pressure gauge / pressure display for the rollers
- Safety device (safety line with switch unit)
- operating instructions

* Special accessories included :
- ROCCI height-adjustable center support
* for large pipe diameters
- ROCCI electro-motorized material feed table
* motorized sheet feeding material support surface

Seller

Registered since: 2011

750 listings online

Call

Send inquiry

Telephone & Fax

+49 5939 ... show

Fax:

These listings may also fit your interest.

Listing

Mot. tank- boiler turning device OERLIKON RB-AFV/FV 4000 Syn

Rödermark

7,854 km

Mot. tank- boiler turning device
OERLIKONRB-AFV/FV 4000 Syn

Call

Year of construction: 2009, condition: good (used), machine/vehicle number: 120P1109, OFFER 21407 Mot. tank-boiler turning device with rail trolley Technical data: - Total payload driven + travelling unit 40000 kg. - payload per vessel device 20000 kg Gbjdpfx Aehcnhmofzok - workpiece diameter approx. 500 - 3500 mm - Centre distance of the support rollers adjustable via trapezoidal thread spindle - roller diameter 500 mm - roller width 150 mm - driven unit with drive on both sides - infinitely variable rotational speed - manual remote control for Re- and Li.-run - drive 400 V - Both units are mounted on rail trolleys - space requirement with running unit approx. W 3800 x H 1150 x D 1350 mm - Space requirement with running unit approx. W 3600 x H 1150 x D 1350 mm - Weight attached unit approx. 2500 kg - Weight with running unit approx. 1800 kg

See details

Listing

Plate rolling machine MG 4roll 2500x12 mm

Cesena

8,449 km

Plate rolling machine
MG4roll 2500x12 mm

Call

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: MG, controller model: 4-AXIS, number of rollers: 4, roller (bottom) diameter: 245 mm, roller (top) diameter: 265 mm, side roll diameter: 185 mm, roller diameter: 280 mm, roller length: 2,550 mm, working width: 2,500 mm, working height: 700 mm, sheet thickness (max.): 14 mm, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 10 mm, overall weight: 7,500 kg, total length: 4,200 mm, total width: 1,500 mm, total height: 1,600 mm, power: 18 kW (24.47 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 3, Equipment: centralized greasing system, cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4roll plate bending machine 2500 X 12 mm with central support hydraulic for large diameters and side arm plate support Capacity plate width 2500 mm Plate thickness 12 mm Prebend 10 mm Upper roll 265 mm Lower rolls 245 mm Surface useful on rolls 2550 mm Power supply 380/50 Electric motor 15 Kw on hydraulic unit Gbsdjxw S Eqepfx Afzsk Configuration Hardened rolls very high surface resistance Conical bending attachment Digital position readout of the rollers Safety and emergency installed per norms Hydraulic rolls power driven with planetary gear unit Hydraulic motion of rollers individual with dual initial pre-pinch Open front drop-end hydraulic to unload the closed shells Central support vertical hydraulic operated for large diameters Side arm operated hydraulic support Total weight of the machine 7500 Kg machine layout 4200X1500 X H1600 mm

See details

Listing

Korschenbroich

7,648 km

Forklift gas
HYSTERS180XL

€20,000

Fixed price plus VAT

Call

Listing

Inverter power source for orbital welding machine, welding unit + water cooling, orbital welding uni MESSER GRIESHEIM - POLYSOUDE PS 204 + RC 200

Hessisch Lichtenau

7,826 km

Inverter power source for orbital welding machine, welding unit + water cooling, orbital welding uni
MESSER GRIESHEIM - POLYSOUDEPS 204 + RC 200

€1,200

Fixed price plus VAT

Call

Condition: used, Power source for orbital welding machine MESSER GRIESHEIM - POLYSOUDE PS204 Water cooling unit for orbital welding machine MESSER GRIESHEIM - POLYSOUDE RC200 Welding power source, inverter welding machine POLYSOUDE PS 204 + RC 200 Year of manufacture: 1997 Power source serial no.: 9885186 Cooling unit serial no.: 97861? Output: 200 amps = 20% duty cycle 90 amps = 100% duty cycle Power supply: 230 volts, 50 Hz, Schuko plug - Remote control cable type BP 1436 with 7.5 m connection cable - Adjustable output from 1 to 200 amps - DC only - HF ignition - Cooling water unit for torch cooling - 44,895 operating hours (read) - Operating and maintenance manual included Space requirements welding machine (L x W x H): 550 x 360 x 500 mm Space requirements cooling unit (L x W x H): 550 x 360 x 550 mm Gbedpfx Ast Awm Defzek Weight welding machine: 45 kg Weight cooling unit: 25 kg Good condition Sold without accessories The price refers to a set consisting of 1x power source and 1x water cooler.

See details

Listing

Hydr. four-roll round bending machine AKBEND AHS 2600 x 20/16 mm

Kreuztal

7,743 km

Hydr. four-roll round bending machine
AKBENDAHS 2600 x 20/16 mm

Call

Condition: excellent (used), Year of construction: 2012, Technical Data: Working width: 2600 mm Bending capacity: 20.0 mm Pre-bending: 16.0 mm Top roll diameter: 330 mm Middle roll diameter: 300 mm Side rolls diameter: 240 mm Gedpfx Asx Ii Hvofzobk Conical bending device via tilting of both side rolls Mobile control panel with digital display Motor power: 11 kW CE mark Dimensions (L x W x H): approx. 5800 x 2300 x 1900 mm Weight: approx. 11 t Additional equipment: Upper bending aid The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

See details

Listing

Krefeld

7,636 km

Section Bender
AKYAPAKAPK 30

Call

Condition: as good as new (ex-display), Year of construction: 2007, I - beam section - flat steel 50 x 10 mm I-beam section - upend 80 x 15 mm L-beam 50 mm round material 30,0 mm bar material dia. max. 1 1/2" mm bar material - diameter 30,0 mm weight 0,185 t range L-W-H 670 x 530 x 1350 mm square material 40 x 40 x 3 mm pipes 60 x 2,0 mm total power requirement 0,75 kW Demonstration device Equipment: • Base frame of the machine • Foot switch Gedot U R H Uspfx Afzobk • Standard-rolls (divided) • Possible to bend horizontally and vertically

See details

Listing

Hergensweiler

8,062 km

Welding turn Table
ProtecRB 3000 G

€3,500

Fixed price plus VAT

Call

Listing

Polishing machine Optimum OPTIpolish GZ 40P

Waiblingen

7,958 km

Polishing machine
OptimumOPTIpolish GZ 40P

Call

Condition: like new (used), Year of construction: 2024, As-new polishing machine OPTIMUM OPTIpolish GZ40P with variable-speed conversion featuring Siemens inverter and cyclone extraction system. For polishing wheels with a diameter of up to 350mm, maximum wheel width 35mm, wheel bore 20mm. Suitable for continuous and intensive industrial use. Heavy-duty industrial polishing machine; its high dead weight absorbs the already minimal vibrations. Maintenance-free, long-life induction motor with smooth operation, cast iron housing. Additionally equipped with: Variable speed drive using Siemens Sinamics V20 inverter. Circumferential speed adjustable from 34 m/s down to 6 m/s. Sturdy base with cyclone extraction integrated in the base, thus requiring minimal space. Sound-insulated. The base must be filled with concrete by the customer. Gbjdpfxsyglkys Afzek Automatic start/stop feature: When the external device is powered on or off, the extraction system automatically switches on or off with a 2-3 sec delay. There is no need to operate the extraction system separately. According to hazardous substance regulations, residual dust is extracted after the machine shuts down. The machine is located at 71334 Waiblingen-Beinstein and can, of course, be inspected by appointment. Please contact us for further information.

See details

Listing

Hydraulic four-roll bending machine PARMIGIANI VHB 2600 x 16/12 mm

Kreuztal

7,743 km

Hydraulic four-roll bending machine
PARMIGIANIVHB 2600 x 16/12 mm

Call

Condition: excellent (used), Year of construction: 2009, Technical data: Working width: 2600 mm Bending capacity: 16.0 mm Gbjdpfeyg Eulex Afzjk Pre-bending: 12.0 mm NC control Upper roller diameter: 330 mm Middle roller diameter: 290 mm Side roller diameter: 270 mm Conical bending device via inclined positioning of the side rollers Mobile control panel with digital display Motor power: 11 kW CE mark Dimensions (length x width x height): approx. 5100 x 2100 x 1800 mm Weight: approx. 12 tons The seller is not liable for typographical or data transmission errors. The machine's condition, both visually and technically, as well as wear, is in accordance with its age; used machines are sold without any warranty.

See details

Listing

Plate Bending Machine - 4 Rolls MG EH 306 A/S

Ahaus

7,617 km

Plate Bending Machine - 4 Rolls
MGEH 306 A/S

Call

Condition: excellent (used), Year of construction: 2001, sheet width 3100 mm plate thickness 6.0 mm ST pre-bending 4.0 mm ST diameter of upper rolls 200 mm side roll diameter 165 mm diameter of lower rolls 190 mm bending speed ca. 5.0 m/min Control DIGI oil volume 80.0 Liter voltage 380 V total power requirement 6.0 kW weight 6000 kg range L-W-H 5250 x 1500 x 1400 mm very good condition (!!) Current new price approx. 80,000 euros Special price on request Features: - Robust electro-hydraulic 4-roll bending machine * 4-roll concept offers a wide range of bending and rounding options - MG swivel control panel Gjdpfsx Sr Dfox Afzebk * Operation - control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Two central rolls are driven directly by hydraulic motors - Conical rolling possible via inclined position of the rolls - Parallelism of the side rollers via torsion shafts - Bending on both sides - Diameters of up to 1.1 times the upper roller diameter are possible - Forged and hardened rollers with a strength of 53-55 HRC - Low-maintenance, stable machine concept - Permanent lubrication of all bearings - Stable steel welded construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge/pressure display for the rollers - Safety device (safety line with switch unit) - Operating instructions (PDF)

See details

Advertise here