Sizing saw make BÄUERLE type FB 25 series D
Machine # D 115, year of construction not apparent
sliding carriage length 2700 mm
cutting width 850 mm
saw blade diameter 420 mm
drive power 7,5 PS
outer dimensions 2700 x 1000 x 900 mm
- support arm
used, in good and working condition €
The saw unit cannot be swivelled.
Type: K 700 S/03 Year of construction: 2006 Condition: function tested, very good, used - tiltable saw blade up to 45 degrees - trimming carriage length 2800 mm - cutting width 1300 mm - scoring unit - motor 4 kW / 400 V - CE-conform Available from kw 03-2022!
Panel saw Holzkraft / SCM S 350 WS
used, year of constr. 2008
Sliding table length 2600 mm
Circular saw blade max. D 350 mm, inside diam. 30 mm
Speeds: 3500 - 4200 - 5000 rpm (according to the operating instructions)
Cutting height max. 118 mm
Scoring unit with separate motor
Motorized cutting height and angle adjustment with digital display
Cutting width with rip fence about 1300 mm, digital display for cutting width
Rip fence can be swiveled away, table widening with tape measure up to appr...
" Products " Woodworking " Holzkraft " Sizing circular saws
Series SC 3 classic - Small format circular saws
Cutting plane directly on the roller table
Precision-guided sliding table made of aluminium, anodized as standard
Large table arm guided on telescopic arm and longitudinally adjustable
Extendable aluminium telescopic stop, angle adjustable with professional stop flaps
Rip fence with quick clamping and fine adjustment
The standard table widening and table extension make it easy to work wi...
Sizing saw make ALTENDORF type F 90
make # 6911133 year of construction 1969
cutting length 2800 mm
cutting width 1000 mm
cutting height 0 - 55 to 75 - 155 mm
4 speeds 3000 / 4000 / 5000 / 6000 rpm.
Saw blade diameter 250 - 450 mm
Saw blade bore 30 mm
Drive power 5,5 kW
power supply 380 V / 50 Hz
weight approx. 970 kg
used, in good condition
Altendorf WA 6
manual height adjustment,
sliding table length 2600 mm
Lowerable below table height
----- Technical data -----
Swivel range: 0 - 45 °,
Cutting width at rip fence: 1,000 mm,
max. cutting height: 87 mm,
max. saw blade Ø: 315 mm,
Swivel range of mitre fence: up to 49 °,
Speeds: 4,200 rpm,
Engine power main engine: 5.5 hp / 4 kW,
Motor power scoring motor: 0.5 PS / 0.37 kW,
Work table height: 910 ...
In heavy professional version with scoring unit and format sliding carriage made of anodised aluminium
Standard with scoring unit with separate drive motor, adjustable from outside
Smooth-running anodised aluminium sliding table
Large table extension (longitudinally adjustable) with material roll on telescopic arm
Extendable telescopic crosscut fence with two flip stops
Precise rip fence, folds down for large plates, with quick clamping and integrated fine adjustment
Standard with ...
Technical data si x
- cast iron saw worktable diam. mm 1000 x 685
- blades tilting - 46° ÷ +46°
- max. saw blade Ø with scoring blade installed mm 400
- max. saw blade projection from table at 90°/45° mm 136/97/60
- scoring blade diameter mm 160
- max. squaring stroke (standard) mm 2600
- cutting width on parallel fence [mm] 1270
Other technical features:
- three phase motors 7kW (9,4hp) 50Hz
- phase motor (scorer) 0,9kW (1,2hp) 50Hz
- exhaust outlets diameter mm 120 - 80
Due to a company liquidation the following machine is for sale:
Year of construction: ca. 1965
Maximum saw blade diameter: 500mm
without cross stop
Saw blade bore: 30mm
Cutting length: 2650mm
Maximum workpiece width: 85cm
Height adjustable: Yes
Motor: 5,5 PS
Speed: 3500, 5000, 7000
Weight: 950 kg
Demonstration possible. Shipping possible for an additional charge.
With machine service, repair and maintenance.
SCHULTZE Holzbearbeitungsmaschinen specialises in trading with new and used machines in the woodworking industry. These can be viewed and purchased in our warehouse in quantities by prior appointment.
The company also offers service and repair work.
Comfortable and precise woodworking with the highest quality for every training and craft enterprise. Saw unit can be swivelled by 46° on both sides. Programmable, electric saw blade adjustment
The Werktuigen Trust Seal enables buyers to quickly recognize whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Verification of the dealer's postal address
Validation of the banking details
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal awarded to you in your listings on Werktuigen. In this way, you signal to any potential buyer the independently verified seriousness of your company. This creates buyer confidence and increases the likelihood of successfully selling machines. In addition, you have the option of including the Maschinensucher seal of confidence on your homepage and letterhead.
All information, offers and prices on this website are subject to change and non-binding!
Designated trademarks belong to their respective holders.
MSG Auctions GmbH does not assume liability for the content of linked external websites.