Used Altendorf F 45 for sale (67)

Condition: good (used), Year of construction: 2003, functionality: fully functional, Length of sliding table: 3,000 mm Cutting width at rip fence: 1,000 mm Cutting height with blade diameter 450 mm: 75 - 150 mm Cjdpfx Asx Dax Esduehf Cutting height with blade diameter 350 mm: max. 100 mm (each at 90-degree blade position) Double carriage on steel round guides, no Pertinax Reinforced main saw motor: 7.5 kW Maximum saw blade diameter: 450 mm Height adjustment of the saw unit via dimension input on the control panel Motorized tilt adjustment of the saw unit via dimension input on the control panel Supplied with newly installed 350 mm saw blade 2-axis scoring saw unit, can be set in the control system to desired height and alignment relative to the main saw blade Scoring unit automatically lowers below table level when not in use Adjustment of the scorer can be done while the machine is running RAPIDO scoring saw blade – simplifies scoring width adjustment, set up in max. 3 minutes Adjustment range: 2.8 – 3.8 mm Additional accessories: - Mitre fence extendable to 3,200 mm, with 2 foldable stops - LASER cutting line indicator, e.g. for trimming cuts on solid wood planks

Condition: new, Year of construction: 2022, Sawblade tiltable 46 ° Length of the rolling table 3000 mm cutting width 1300 mm Motor output 5,5 kW Cutting height 150 mm Codpex Avq Uefx Adujhf Saw blade diameter 450 mm Speed stufenlos U/min. weight of the machine ca. 1300 kg

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, cutting length (max.): 3,200 mm, cutting width (max.): 1,250 mm, cutting width at rip fence: 1,250 mm, cutting height (max.): 80 mm, cutting height with scoring (max.): 80 mm, saw blade diameter: 300 mm, table length: 3,200 mm, height adjustment type: hydraulic, type of input current: three-phase, input voltage: 400 V, Equipment: saw blade guard, Year of manufacture: 1991, in very good condition and free of play First owner Codpsx Dkvzefx Aduohf Almost exclusively used for processing panel material Sliding table 320 cm 45° hydraulically tiltable Scoring unit All stops, protective covers, and required accessories included

Condition: excellent (used), Year of construction: 1986, Used, good condition Make: Altendorf Type F45 Year of manufacture: 1986 Machine No. 86-4-143 GS-tested Csdpfx Aswhgd Sodushf Motor: 5.5 kW Carriage length: approx. 2500 mm Cutting width: approx. 800 mm Pivotable up to 45° Saw blade diameter: 450 mm Parallelogram guard Miter stop Extraction connection: D 80 and 120 mm Space required: approx. 2500 mm x 1600 mm x 1500 mm Weight: approx. 1000 kg Storage location: 54634 Bitburg, Germany, free on load, unpacked Sold in the current condition as seen, without warranty or guarantee

Condition: good (used), Panel saw Altendorf F45 in good overall condition Year of manufacture: approx. 1990 Chjdpfsx Alcaex Adujf Sliding table 2800 mm Motor 5.5 kW Documentation available

Condition: reconditioned (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: Werksüberarbeitungsnummer: WÜA20111490519800, cutting length (max.): 3,000 mm, cutting width at rip fence: 1,000 mm, saw blade diameter: 450 mm, table length: 840 mm, power: 5 kW (6.80 HP), Equipment: rotational speed infinitely variable, Used machine GM010.0348 Year of manufacture: 2020 Chsdpfx Asw Intyjduef F45 ElmoDrive Machine height: 910 mm Control at eye level Document holder directly at the control panel Double-sided tilting (+/- 46°) Max. blade diameter: 450 mm Motor: 5.0 kW (6.8 HP) VARIO Prepared for 2-axis scoring unit Table extension: 840 mm Double roller carriage with carriage length 3000 mm On/Off switch on double roller carriage PQS centrally positioned Parallel fence DIGIT X 1000 mm Front support roller

Condition: used, Year of construction: 1984, Used machine Csdsxuxg Nspfx Aduohf Year of manufacture: 1984 Equipment and technical specifications: - Cutting length: 2800 mm - Cutting width: 1250 mm - Saw blade swivel range: 0° - 45° - Max. saw blade diameter: 350 mm - Saw blade speeds: 3000 / 4000 / 5000 / 6000 rpm - with scoring saw unit - with parallelogram guard - with extraction port 80 mm - with table extension 800 mm - Motor 5.5 kW - with brake motor Weight approx. 850 kg Availability: approx. end of January 2026 Location: Hesse

Condition: excellent (used), Year of construction: 2024, Sawblade tiltable 46 ° Length of the rolling table 3000 mm cutting width 13000 mm Codpfsx Ak Hwsx Adushf Motor output 7,5 kW Cutting height 204 mm Saw blade diameter 550 mm Speed 3000/4000/5000 U/min. weight of the machine ca. 1250 kg

Condition: used, Year of construction: 1993, functionality: fully functional, Panel saw Manufacturer: Altendorf Model: F 45 Year of manufacture: 1993 With 2800 mm sliding table Motor: 5.5 kW Codpfoxwypqox Aduehf Max. blade diameter: 350 mm Scoring motor: 0.75 kW With width extension With length extension

Condition: excellent (used), Year of construction: 2011, Altendorf Panel Saw F 45 Double roller carriage with carriage length 3000 mm Cutting width: 1300 mm with Digit X Drive power: 5.5 kW Saw blade diameter: 500 mm Codpfx Adexiv Dhouehf 2-axis scoring unit Table extension: 840 mm Angle-mitre fence Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1988, Panel saw Manufacturer: Altendorf Model: F45 Year of manufacture: 1988 Sliding table length: 320 cm Chjdpfxoxvyams Adujf Cutting width: 100 cm Cutting height: approx. 153 mm Max. saw blade diameter: 450 mm Power: 5.5 kW Speeds: 3 / 4 / 5 / 6,000 rpm Scoring unit: No Motor brake: No

Condition: reconditioned (used), Year of construction: 2020, machine/vehicle number: Werksüberarbeitungsnummer: WÜA20111490716308, cutting length (max.): 3,800 mm, cutting width (max.): 1,300 mm, saw blade diameter: 500 mm, table length: 1,200 mm, power: 5.5 kW (7.48 HP), Equipment: rotational speed infinitely variable, Template holder TPL 1,200 mm reinforced On/off switch at DRW WGA Digit - L Chsdpfx Aowqfxteduef Extendable cross slide extension PA 1,300 mm - CNC Front support roller Laser - kerf indicators

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, cutting length (max.): 3,200 mm, cutting width at rip fence: 1,300 mm, main saw diameter: 450 mm, power: 5.5 kW (7.48 HP), Equipment: motor brake, scorer, Machine available from October 2025 Chjdpfx Aew Rc H Hoduof - TOP condition - Digital display for motorised height adjustment - Digital display for motorised tilt adjustment 90° - 45° - Sliding table length 3200 mm - Scorer with 2-axis motorised adjustment - Digital display for cutting width at parallel fence 1300 mm, motorised adjustment - Motor power 5.5 kW (7.5 HP) Vario - Digital display for stepless speed adjustment 2800 - 6000 rpm - Digital display for angle stop; crosscuts up to 3800 mm - Table extension 800 mm

Condition: used, Year of construction: 1987, machine/vehicle number: 87-1-216, cutting length (max.): 3,200 mm, cutting width (max.): 1,250 mm, cutting width at rip fence: 1,250 mm, cutting height (max.): 155 mm, saw blade diameter: 450 mm, overall weight: 1,000 kg, pivoting range: 45 °, power: 5.5 kW (7.48 HP), Used Altendorf panel saw type F 45, sliding table 3,200 mm, cutting width at parallel fence 1,250 mm, max. saw blade D = 450 mm, max. cutting height approx. 150 mm, motor 5.5 kW, 4 speeds 3,000/4,000/5,000/6,000 rpm, parallelogram guard hood, hydraulic height and tilt adjustment 0 - 45°, manual angle display, double-sided mitre fence "Duplex" extraction connection D = 120 and 80 mm, Cedoxu D R Hspfx Adujhf located in Seevetal, as inspected, without freight and packaging, interim sale reserved,

Condition: new, Year of construction: 2025, functionality: fully functional, cutting length (max.): 3,200 mm, cutting width (max.): 1,000 mm, cutting height (max.): 150 mm, table length: 3,200 mm, Basic Configuration - Electrically powered height and tilt adjustment 0-46° for the main saw blade with automatic correction of the cutting height when tilting the saw unit - Control panel at eye level, swiveling - Double roller carriage, carriage length 3,000 mm - Parallel fence, manual adjustment via measuring scale, including manual fine adjustment, cutting width 1,000 mm - Angle fence with fixed 90° position, manually adjustable via measuring scale up to 3,200 mm - Max. saw blade projection 154 mm, max. saw blade diameter 450 mm - Drive power 5.5 kW (7.5 HP) with three speeds (3,000/4,000/5,000 rpm) - AKE tool clamping system for the main saw blade - Working height 91 cm Control System - Electrically powered height and tilt adjustment, also on both sides (+/- 46°)*, for the main saw blade with automatic height correction and digital displays - Electrically powered adjustment of the parallel fence* - Electrically powered adjustment of the CNC miter fence UNO 90* - Automatic size correction on the parallel fence and angle fence when tilting the saw unit - Digital speed display or stepless speed control (VARIO)* - Electrically powered adjustment of the scoring unit, two or three axes* - Stepless fine adjustment of the axes via +/- buttons - Control of vacuum clamping in the double roller carriage* - Easy axis calibration - Machine diagnostics - Operating hours counter - USB interface - Recall of the last dimension entered (back function) - 99 storable cutting programs - Grooving: with automatic stepwise positioning of the parallel fence until the groove is complete - Automatic conversion from peak to blunt measurement on the parallel fence and angle fence, taking material thickness and tilt angle into account - Compound angle cut function with automatic calculation of missing angles or dimensions - Advanced tool management · Storage of the scorer position (3-axis scorer)* · Saving of main blade thickness and cutting width · Saving of main tool speed · Max. 100 storable tools - Additional functions · Grooving: with automatic stepwise positioning of the parallel fence until the groove is complete · Chain dimension function: cutting sequences with identical distances on the parallel fence, calculated on both sides of the saw blade · Angle cut: by trimming the oversize, the desired finished size is produced after entering the edge angle · 999 storable cutting programs Csdpjxuqulefx Aduohf *optional accessories The following options are included: - Pattern holder - Extended cutting height incl. tilting - Motor 5.5 kW (7.5 HP) VARIO - 2-axis scorer unit - LED lighting - Double roller carriage with a length of 3,200 mm - On/Off switch on double roller carriage - Digital miter fence Digit L - CNC parallel fence 1,300 mm - Front support roller - Duplex 1350

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, cutting width (max.): 1,300 mm, saw blade diameter: 500 mm, Equipment: scorer, TECHNICAL DETAILS Chedjxnx Hcepfx Aduef Double roller carriage length: 3,000 mm Cutting width: 1,300 mm Drive power: 5.5 kW Saw blade diameter: 500 mm Table extension: 840 mm EQUIPMENT 2-axis scoring unit Mitre/fence angle stop

Condition: used, Year of construction: 1986, Used machine Year of manufacture: 1986 Cutting length: 2800 mm Cutting width: 1000 mm with scoring unit Motor 5.5 kW with brake motor with parallelogram safety guard with table extension 800 mm The duplex double mitre fence shown in the picture is not included in the delivery! Availability: short-term Storage location: Röllbach Chodsw A Dd Sopfx Aduof

Condition: reconditioned (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: Werksüberarbeitungsnummer: WÜA20101490328170, cutting length (max.): 3,800 mm, cutting width at rip fence: 1,300 mm, saw blade diameter: 450 mm, table length: 840 mm, power: 6.5 kW (8.84 HP), Equipment: scorer, Used machine GM010.0256 Year of manufacture: 2020 F45 ElmoDrive Machine height: 910 mm Eye-level control panel Dual-sided tilting ( + /- 46°) Maximum blade diameter: 450 mm 6.5 kW (8.8 HP) motor Chjdow Imvmepfx Adusf 3-axis scoring unit with dual-sided tilt Table extension: 840 mm Double roller carriage, carriage length 3800 mm On/Off switch on double roller carriage Angle and miter stop CNC parallel fence: 1300 mm Laser cut line indicator Spraying device

Condition: used, Year of construction: 1999, functionality: fully functional, cutting length (max.): 2,400 mm, cutting width (max.): 1,000 mm, cutting width at rip fence: 1,000 mm, cutting height (max.): 150 mm, saw blade diameter: 450 mm, table length: 3,400 mm, height adjustment type: electric, overall weight: 1,100 kg, input voltage: 380 V, input frequency: 50 Hz, power: 5.5 kW (7.48 HP), space requirement length: 7,460 mm, space requirement width: 4,830 mm, sliding table height: 910 mm, Panel saw F 45 ELMO CE version Cedpfx Adsxl Sa Rouohf Double roller carriage with 3400 mm carriage length Cutting width 1000 mm with electro-motorized adjustment Height and tilt CNC controlled Saw blade diameter 450 mm Angle stop for cross cuts up to 3200 mm Cross slide extension Table top extension Main saw blade drive power 5.5 kW Scoring unit electrically prepared Angle stop DIGIT-L

Condition: new, Year of construction: 2025, functionality: fully functional, cutting length (max.): 3,105 mm, cutting width (max.): 1,300 mm, cutting width at rip fence: 1,300 mm, cutting height with scoring (max.): 150 mm, saw blade diameter: 450 mm, height adjustment type: electric, table height: 910 mm, rotational speed (min.): 3,000 rpm, rotational speed (max.): 5,000 rpm, type of input current: three-phase, input voltage: 400 V, warranty duration: 12 months, power: 7.5 kW (10.20 HP), Altendorf F45 Pro Drive The machine is new and configured as follows: Working height: 910 mm Sliding table length: 3200 mm Control panel at eye level for comfortable operation Cutting height: 150 mm with a 450 mm saw blade Main motor: 7.5 kW with three rotation speeds; features the AKE saw blade changing system 2-axis scoring unit with a safety LED light in the scoring area, enhancing operator awareness when the scoring unit is active Main motor and scoring unit ON/OFF buttons on the sliding table for convenient machine startup Mitre crosscut fence, extendable to 3500 mm, with angle correction Cjdoxaudhjpfx Aduohf Cutting width: 1300 mm with CNC, programmable via the screen Gobjxaudhskr A Tq Djkc Motorized rise, fall, and tilt adjustment (0–46°) for the main saw blade, with automatic cutting height correction when the blade is tilted The Altendorf F45 has long been recognized as the flagship of sliding table saws, consistently setting the highest quality standards for this type of machine.

Condition: used, Year of construction: 2024, functionality: fully functional, cutting width (max.): 1,000 mm, cutting height (max.): 154 mm, saw blade diameter: 450 mm, overall weight: 1,200 kg, rotational speed (min.): 3,000 rpm, rotational speed (max.): 5,000 rpm, input voltage: 400 V, pivoting range: 45 °, input frequency: 50 Hz, power: 7.35 kW (9.99 HP), Equipment: motor brake, scorer, with Prodrive control system Scoring unit with LED lighting with CNC rip fence Crosscut fence with digital display Table extension: 840 mm Angle-mitre fence DIGITAL Codpfxexl Ti Ts Adujhf Machine height: 910 mm 2-axis scoring unit with swivel Automatic dimension correction on rip and angle fence when swiveling the saw unit Easy axis calibration Machine diagnostics, operating hours counter, USB interface Recall of last input dimension (back function) 99 storable cutting programs Further technical data Extraction port: 120 / 80 mm Outrigger table: 1200 mm Speed: 3000 / 4000 / 5000 rpm Sliding table: 3200 mm Height adjustment: electric Angle adjustment: electric Safety device: overhead guard

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 Standard Equipment: - Electrically powered height and tilt adjustment (0–46°) with automatic correction of cutting height during tilting - Eye-level, swiveling control panel - Double roller carriage, carriage length 3,000 mm - Manually adjustable rip fence with scale, including manual fine adjustment, max cutting width 1,000 mm Chsdpfx Adsw I Uxceuef - Crosscut fence with fixed 90° position, manually adjustable via scale up to 3,200 mm - Max saw blade projection: 150 mm - Max saw blade diameter: 450 mm - Drive power: 4 kW (5.5 HP) at 4,000 rpm - AKE main saw blade clamping system - Working height: 91 cm Motor 5.5 kW (7.5 HP) with VARIO F45: - Stepless speed control from 2,000–6,000 rpm - Precise speed adjustment to the material increases cutting quality and blade service life Extended Cutting Height for Single-Side Tilting: - This option enables single-side tilting with a large extraction hood for max blade Ø 550 mm and a blade projection of up to 204 mm - In combination with a scoring unit: max blade Ø 500 mm / max cutting height 179 mm - Only available in conjunction with at least 5.5 kW (7.5 HP) drive power 2-axis Scoring Unit for Tilting: - With motorized height and lateral adjustment, programmable scoring blade height with quick lowering and raising - Drive motor 0.75 kW (1 HP), 8,200 rpm - Retrofitting only possible on machines prepared for the scoring unit LED Lighting: - Highly energy-efficient LED technology for clear marking of the scoring area The Altendorf double roller carriage is renowned for its smooth operation and precision run. It can be locked steplessly in any position. The large double rollers, precision-manufactured from hardened steel, ensure the upper carriage remains absolutely accurate in conjunction with the lower carriage on the hard-chromed guide bars. This running quality is maintained even after decades of heavy use and exposure to dirt. The carriage construction features a highly rigid, torsion-resistant multi-chamber design. The table surface is finely planed and anodized. A hard-chromed round bar in the upper carriage serves as both the mount for the cross-slide and the interface for various accessories. The entire unit is low-maintenance and does not require lubrication. On/Off Switch on Double Roller Carriage: - The on/off switch on the double roller carriage is always within easy reach. With four buttons, both the main saw blade and the scorer can be switched on and off, saving time and increasing safety. Angle/Mitre Fence, Crosscutting up to 3,500 mm: - This Altendorf-patented fence with integrated length compensation makes it easier to cut angles and mitres precisely in a single operation. In both positions, the swivel angle is steplessly adjustable by up to 49° and displayed on a scale. The play-free and robust stop flaps can easily be moved and adjusted as a single flap over the entire area up to max. 3,500 mm.

Condition: reconditioned (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: Werksüberarbeitungsnummer: WÜA20101490211358, cutting length (max.): 3,400 mm, cutting width at rip fence: 1,300 mm, saw blade diameter: 450 mm, table length: 840 mm, power: 6.5 kW (8.84 HP), Used machine GM010.0217 Year of manufacture: 2020 F45 ElmoDrive Machine height: 910 mm Eye-level operation Dual-sided tilting (+ / - 46°) Max. blade diameter: 450 mm 6.5 kW (8.8 HP) motor Table extension: 840 mm Double roller carriage with 3400 mm carriage length Miter angle stop CNC parallel fence 1300 mm Csdew Imrbspfx Adujhf Front support roller STEG, second support on the double roller carriage

Condition: reconditioned (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 20-11-14-902, cutting length (max.): 3,200 mm, cutting width (max.): 1,000 mm, saw blade diameter: 450 mm, table length: 840 mm, Equipment: rotational speed infinitely variable, Manufacturer-refurbished Altendorf F45 with ElmoDrive control & Digit L display! TECHNICAL DETAILS Maximum cutting length: 3,200 mm Maximum cutting width: 1,000 mm Saw blade diameter: 450 mm Table length: 840 mm Saw blade projection 90° single-sided tilt: 154 mm 90° dual-sided tilt: 154 mm Chedpfx Adjxc T Tmeuef +45° single-sided tilt: 105 mm +45° dual-sided tilt: 105 mm -45° dual-sided tilt: 78 mm MACHINE DETAILS Power: 5 kW Dust extraction connection Upper extraction: Ø = 80 mm Lower extraction: Ø = 120 mm Suction pressure: 1,200 Pa at total extraction port, Ø = 140 mm Airflow: v_min = 1,110 m³/h at 20 m/s Air cushion table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) EQUIPMENT Continuously variable speed Dual-sided tilting Scorer preparation Template holder Digit - L PA 1,000 mm - CNC Front support roller

Condition: reconditioned (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 20-11-14-007, cutting length (max.): 3,430 mm, cutting width (max.): 1,300 mm, saw blade diameter: 500 mm, table length: 1,200 mm, Factory-refurbished Altendorf F45 with ElmoDrive control and parallelogram cross-slide! TECHNICAL DETAILS Maximum cutting length: 3,430 mm Maximum cutting width: 1,300 mm Saw blade diameter: 500 mm Table length: 1,200 mm Saw blade projection 90° with single-sided tilting: 179 mm 90° with double-sided tilting: 179 mm +45° with single-sided tilting: 123 mm +45° with double-sided tilting: 123 mm -45° with double-sided tilting: 96 mm MACHINE DETAILS Dust extraction connections Extraction at the top: Ø = 80 mm Chedoxc Uhfjpfx Aduof Extraction at the bottom: Ø = 120 mm Vacuum pressure: 1,200 Pa at total suction port, Ø = 140 mm Air consumption: v_min = 1,110 m³/h at 20 m/s Air cushion table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) EQUIPMENT Reinforced TPL support 1,200 mm On/off switch on DRW Extendable cross-slide extension Front support roller Laser - kerf indicator