Used Roll benders (motor-driven) for 0 - 2.9mm sheet thickness for sale (57)

Condition: used, Year of construction: 2025, sheet width 1250 mm plate thickness 1.5 mm roll length 1270 mm roll diam. toproll 75.0 mm engine output 1.5 kW weight 400 kg Cgob Euhuovq R Iuovjt range L-W-H 1730 x 700 x 1160 mm Exhibition machine - like NEW not yet in use (!!) Special price on request Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever - electrical safety device

Condition: used, Year of construction: 2000, Max. bending length: 1040 mm Max. sheet thickness: 2 mm steel Right and left rotation via foot switch Safety rope pull switch Conical rounding possible Cgsb Euovrh R Aehuvet 600 kg

Condition: used, gr. working width: 1100 mm for sheet thickness (steel sheet) up to approx.: 1 mm electr. drive: 380 V, 0,75 kW Cjb Euhocaxvhjuvsgt space requirement: 2330 x 600 x 1140 mm weight: 357

Condition: new, sheet thickness: 2.5bending length: 1550upper roll diameter: 90 Technical specifications: - Cast iron body - By manuel or motorised (optional) bending - Opening top roll to side after bending for taking out the material easily - Cone bending device - Movement of the back and bottom rolls up and down manually with hand wheel - Portable control panel in order to control material from required  locations with foot pedal  - In acccordance with CE norms. Options: - Back roll with motor EURO 825,-- - Digital readout for displaying position of the backroll EURO 1.010,-- - Body cover EURO 362,-- Cgjbed Ab Txs Euhuvot - Hardened rolls EURO 650,-- We have many references!

Year of construction: 1982, Condition: good (used), Motorized round bending machine FASTI type: 106-20-2 year 1982 Bending capacity : 2040 mm X 2 mm in steel Rollers diameter 110 mm , with bending . Roll drive motorized Rolls adjustment motorized Cgobjk Iymxs Euhuvet Space requirement: 2,5 m X1 m X 1,2 Weight.ca.2000Kg. Machine in Good Condition Undercurrent Demonstratable .

Condition: new, Year of construction: 2025, Functionality: fully functional, Hydraulic two-roller bending machine Guaranteed capacities: Sheet thickness Bending with material 260 N/mm² Yield point: 2 mm Sheet thickness bending with material AISI 304-316 stainless steel: 1.5 mm Cycle time per part: 15 seconds Technical specifications: Working length: 1000 mm Installed power: 5.5 kW Rolling speed: 7 m/min Cgeb Esc S N Rijuhuvet immediately available from the factory!

Condition: excellent (used), Type 1042-18-0.8 Max 1860mm×0.75mm in 400 N/mm2 Runs on a curve see photo. Cjb Euhuevzk Hlevegt

Condition: good (used), Year of construction: 1984, machine/vehicle number: 8413105, with groove in the upper shaft, with steel wheel and scale, solid, stable construction, with wire insert grooves, feed of the rear roller: 70 mm, shaft diameter: 70 mm, color: green Csb Eovqaqfeuhuvegt

Condition: new, - Capacity 700 x 2 mm Csb Eoihv Hpouhuvsgt - Conical rolling - Removable top roller - Foot control - Emergency stop - Documentation - 400V

Condition: good (used), Year of construction: 1993, Functionality: fully functional, machine/vehicle number: HCU3000, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, sheet thickness copper (max.): 3 mm, sheet thickness brass (max.): 3 mm, sheet thickness (max.): 3 mm, roller (top) diameter: 100 mm, overall weight: 5,000 kg, total length: 4,500 mm, total height: 1,600 mm, total width: 1,000 mm, roller (bottom) diameter: 380 mm, bending length: 3,000 mm, type of input current: three-phase, working length: 3,000 mm, roller length: 3,000 mm, Equipment: documentation/manual, emergency stop, Plate rolling machine one-pass full rolling with rubber coated roll 2-roll pinch pre-bend system -Plate sheet width max. 3000 mm -Plate thickness max 2 mm depending on the material hardness -fully hydraulic operated with power unit self enclosed - 9 Kw electric power 400Vac/50 Top shaft size 110 mm -Lower roll size 380 mm urethane coated rubber -Hydraulic front opening for the unloading of closed shells. -Upper beam with adjustable pre-load to compensate the deflection of the top roll under load. Cgobovr S D Ho Euhuvjt -Console electric manual/automatic work sequence with digital readout. - ADDITIONAL EQUIPMENT INSTALLED WITH THE MACHINE -plate loader automatic - -unloading cradle system to receive the rolled plate -complete rubber coating to protect the plate surface from scratches.

Condition: used, Year of construction: 2020, sheet width 1270 mm plate thickness 2.5 mm roll length 1290 mm roll diam. toproll 90.0 mm bending speed 6.0 m/min engine output 1.1 kW weight 520 kg range L-W-H 2130 x 700 x 1200 mm Exhibition machine from 2020 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - motor-driven asymmetrical 3-roller round bending machine - hardened rollers - manual folding bearing for quick removal of the workpiece - profile inlets in the rollers Cgeb Euhusu Tv Efevet - double foot switch for R/L running and emergency stop button - conical bending device - rear roller manually adjustable - electric safety device

Year of construction: 1967, Condition: used, sheet width 103 mm weight 300 kg Cgob Euhslug Txjuvet drive ja Gußhebel abgebrochen

Condition: excellent (used), Year of construction: 2004, Brand : Luna Type : 8835 18/05 Year of construction: 2004 Capacity : 1890x0.5 (250 N/mm2) Mains voltage : 3x400V / 3x230V Roll diameter : Ø 35 mm Motors : 0.75 kW max. working speed : 7.1 m/min Machine weight : 900 kg Art.no. : 6812 Complete, well-functioning CNC plate roller for rolling thin material up to 0.5 mm plate (250 N/mm2). Especially suitable for rolling aluminum sheet. Previously used for rolling lampshades. Machine description Luna: Cob Eujh Ngd Rshuvjgt “The 8835 is a roll bending machine for the production of small radius louvres and reflectors to meet the demands of the latest small diameter light tubes. The machine is designed with three independant bottom rolls to reduce prodcution time to a minimum. All rolls run in adjustable support bearings to permit easy roll adjustment for materials of different hardness and thickness. The top roll crowning is carried out by means of a crossbeam, which tilts to make room for the bent part. All rolls are hardened and chromium-plated with polished surfaces to avoid marking. The control system allows the programming of constant radius parts as well as parabolic shapes. 100 programs can be stored. ” Full documentation available: - Operating manual (in English) - Electrical Schematics

Condition: new, sheet thickness: 1.2bending length: 1550upper roll diameter: 70 Technical specifications: - Cast iron body - By manuel or motorised (optional) bending - Opening top roll to side after bending for taking out the material easily - Cone bending device - Movement of the back and bottom rolls up and down manually with hand wheel - Portable control panel in order to control material from required  locations with foot pedal  - In acccordance with CE norms. Options: - Back roll with motor EURO 825,-- - Digital readout for displaying position of the backroll EURO 1.010,-- - Body cover EURO 362,-- Ceb Euhjd Ab T Nsuvogt - Hardened rolls EURO 550,-- We have many references!

Condition: new, - Capacity 1270 x 1.5 mm - Conical rolling - Removable top roller - Foot control Cgjb Euhuoh Ralqjvet - Emergency stop - Documentation - 400V

Condition: used, Year of construction: 1982, sheet width 2000 mm plate thickness 8,0 mm distance between columns 2090 mm roll diameter 190 mm Cjb Euhuovki Iasvjgt total power requirement 4,5 KW weight of the machine ca. 1,5 t dimensions of the machine ca. 3200 x 1000 x 1000 mm Sheet metal bending machine 3 rollers - holder for profile bending tools - 3 driven rollers - hardened rollers

Condition: used, Year of construction: 2007, sheet width 2030 mm plate thickness 1,0 mm roll length 2050 mm roll diameter Ø 95,0 mm work height max. 950 mm engine output 1,0 kW Cob Euhuou I Eftevjgt weight 275 kg range L-W-H 2700 x 700 x 1160 mm Furnishing: - motor-driven asymmetrical 3-roller bending machine - hardened rollers - Manual folding storage for quick removal of the workpiece - Profile inlets at the end of the roller - Double foot switch for R/L run and emergency stop button - rear roller manually adjustable - manual infeed of the bottom roller - electrical safety device * Machine link : ?machineno=1008-9401257

Condition: new, bending length: 1050sheet thickness: 1upper roll diameter: 56 Technical specifications: - Cast iron body - By manuel or motorised (optional) bending - Opening top roll to side after bending for taking out the material easily - Cone bending device - Movement of the back and bottom rolls up and down manually with hand wheel - Portable control panel in order to control material from required  locations with foot pedal  - In acccordance with CE norms. Options: - Back roll with motor  - Digital readout for displaying position of the backroll Cgeb Euhued Ab Uysvjt - Body cover - Hardened rolls EURO 336,-- We have many references!

Year of construction: 2021, Condition: new, - Capacity 1070 x 2 mm - Conical rolling - Removable top roller - Foot control - Emergency stop - documentation - 400V Csb Eushc Uvmshuvogt

Condition: new, sheet thickness: 6bending length: 2550upper roll diameter: 190prebending: 5sheet length: 2550Model MRM-S 3 rollers Motorized asymmetric plate bending machines Steel welded frame - Motorized adjustment of the rear roller Cob Euheflvl Aeuvjgt Options: Hardened rollers         1.800,- Extended roller shafts:    500,- Role segment:              750,- Digital display:           800,- All prices excluding VAT

Condition: new, - Capacity 1050 x 1 mm Csb Esi Dhn Sjuhuvegt - Roll diameter 56 mm - Conical rolling - Rotating top roller - Foot control - Emergency stop - documentation - 400V

Condition: new, bending length: 1050sheet thickness: 0.8upper roll diameter: 46 Technical specifications: - Cast iron body - By manuel or motorised (optional) bending - Opening top roll to side after bending for taking out the material easily - Cone bending device - Movement of the back and bottom rolls up and down manually with hand wheel - Portable control panel in order to control material from required  locations with foot pedal  - In acccordance with CE norms. Options: - Back roll with motor  Ceb Euhed Ab U Aeuvsgt - Digital readout for displaying position of the backroll - Body cover - Hardened rolls EURO 336,-- We have many references!

Condition: new, - Capacity 1550 x 2.2 - Electrically adjustable rear roller - Digital display - Hardened rollers - Conical roller - Swiveling top roller - Brake motor - Foot control - Emergency stop - Documentation - 400V Cob Euhoviyunjuvjgt

Condition: new, sheet thickness: 2bending length: 1250upper roll diameter: 75 Technical specifications: - Cast iron body - By manuel or motorised (optional) bending - Opening top roll to side after bending for taking out the material easily - Cone bending device - Movement of the back and bottom rolls up and down manually with hand wheel - Portable control panel in order to control material from required  locations with foot pedal  - In acccordance with CE norms. Options: - Back roll with motor EURO 825,-- - Digital readout for displaying position of the backroll EURO 1.010,-- - Body cover EURO 314,-- - Hardened rolls EURO 465,-- Cgsbsd Ab T He Euhuvot We have many references!

Condition: new, sheet length: 1275sheet thickness: 1,5weight approx.: 0,225messurements (LxWxH): 1,5x0,8x1,2 Cjb Euhujd Eqqvovsgt