Used Barford Sx 6000 for sale (2,491)

Condition: refurbished (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 1276, CNC Hot Radial Forging GFM SX-13 New in 1974 / 2022 New control system PLC SIEMENS S7 Gkodpfx Ahsq U R T Nedec Machine number: 1276 No. of Hammers: 4 Forging force each hummer: 160 Ton Hammer stroke / min: 700/min Hammer lenght: 240 mm Diameter setting range: 80 mm Maximum forging diameter: Structural steel, round-cross section: Ø 130 mm square cross section: Ø 115 mm Smallest dimensions forged: Ø 25 mm Manipulator A max. displacement: 6820 mm Manipulator B max. displacement: 7150 mm Maximum workpiece length: 6000 mm Rapid speed manipulator: 400mm/sec Total connected power: 300 kW 380 V, 50 Hz Machine dimensions: Forging height over floor: 615 mm Total height pf the machinr over floor: 1665 mm Total machine lenght: 32670 mm Total foundation lenght: 33400 mm Tot. machine width (without auxliary equipments): approx 3885 mm Total foundation width: 16000 mm Total weight of the machine: 84.000 Kg

Year of construction: 1974, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 1293, CNC Radial Forging Machine GFM mod. SX-16 Manufacture: GFM (Austria) YOM: 1974 / 2022 Model: SXL-16 Machine number: 1293 PLC: Siemens S7 - Technology V4.2 with CNC Bosch Rexroth XM Numbers of Hammers: 4 Forging force: 800 Ton (200 t per Hammer) Strokes per minute: 580 Hammer length: 320 mm Gjdpfsq U Sa Sex Ahdekc Maximum hammer setting scope - calculated by diameter: 100 mm Maximum diameter of forging regarding: - structural steel: circular cross section – Ø 160 mm square cross section – 130 mm - high alloy steel: circular cross section – Ø 120 mm square cross section – 100 mm Extreme quadrangle: 12 x 120 mm Maximum length of forging: 6000 mm Min and Max diameter of mounting in manipulator: 30 - 160 mm Feed of manipulator A: 6800 mm Feed of manipulator B: 7200 mm Passage through manipulator: Ø 130 mm Manipulators speed in fast move: 400 mm/s Feed speed of manipulators (stepless adjustment): 10 ÷ 115 mm/s Cooling water pressure: 3 ÷ 5 bar Temperature of inlet water: max. 30˚C Cooling water consumption: 34m3/h Pipe diameter for cooling water: 2” Compressed air pressure: min. 5 bar Pipe diameter for compressed air: Ø20 mm Consumption of compressed air: 1,5 Nm3/h Power supply (nominal power): 350 kW Motor voltage: 500 V Control voltage 220 V Power of main engine: 200 kW Power of pump motors: 185 kW Power of manipulators motors: 2 x 22 kW Dimensions of the machine Axis height of forging above the hall level: 750 mm Maximum height of machine above the hall level: 2.050 mm Maximum length of machine on the hall level: 33.740 mm Foundation length: 34.200 mm Maximum width of machine on hall level without loading equipment: 4350mm Foundation width: 15.600mm Machine net weight: 124.490 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, Beam on time: 12,577 hours Laser on time: 68,745 hours Gkjdpfxoznir Ao Ahdjc including Sheetmaster

Condition: good (used), functionality: fully functional, Year of construction: 2007, including Sheetmaster, Gripmaster, and Toolmaster Godozr Ha Eepfx Ahdjkc Year of manufacture: 2007

Year of construction: 2004, condition: good (used), functionality: fully functional, Wrapping machine Manufacturer: Böhl Gkodpsznczdsfx Ahdec Type: BSB-45 SX-2 Year of manufacture: 2004 Total power consumption: 2.5 kW Product dimensions: Width: 5-250 mm Height: 5-250 mm Length: 600-6000 mm Machine weight: 950 kg Includes roller tables: 2 x 4 m

Condition: good (used), Year of construction: 2008, Ref. -No.: 10564 Manufacturer: TOYODA Type: FH 630 SX Year of construction: 2008 Type of control: CNC-Steuerung Control: Fanuc 31i - A Storage location: Halberstadt Country of origin: Japan Serial no.: NS2XXX X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 850 mm B-Axis: 360 ° Max. Workpiece Weight: 800 kg Max. Tool Weight: 27 kg Max. Tool Length: 545 mm Max. Tool Diameter: Ø 120 mm Max. Size Of Workpiece Lxwxh: Ø 1000 x 1000 mm Tool Taper: BT - 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 6000 RPM Machine length: 7000 mm Machine width: 3500 mm Weight Of The Machine Ca.: 20,1 t Further information: Gsdpfxexvw Ize Ahdjkc - Equipped with IKZ and chip conveyor - NC rotary table 360,000 * 0.001° Machine can be inspected under power by arrangement.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, laser power: 6,000 W, CNC laser cutting machine TruLaser 3040 Fiber (L50) 6000 Watt X working area max.: 4000 mm Y working area max.: 2000 mm Z working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 6000 Watt Sheet metal thickness steel max.: 25 mm Sheet metal thickness stainless steel max.: 25 mm Sheet metal thickness aluminum max.: 20 mm Sheet metal thickness copper max.: 8 mm Standard equipment Standard features Machine - Closed machine frame - Integrated cabinet with roller shutter - Torque drive in combination with linear direct drives - Closed beam guidance via laser light cable (LLC) - Cooling unit - Integrated control cabinets with internal lighting - Automatic sheet metal changer in longitudinal direction - 19" touch color screen - Longitudinal conveyor belt - Work area lighting - Positioning laser diode - Spraying device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning - Transport and assembly device TRUMPF Laser - Solid-state laser TruDisk 3001 with one LLC output - Excitation via pump diodes - Laser power control Cutting head - Universal cutting head - Single cutting head strategy - Protective glass against lens contamination - Condition monitoring of the protective glass - ControlLine: Height control and sheet metal edge detection Control system - SINUMERIK 840D SL control system - Simple workshop programming - TruTops Laser via network access - Fast reproduction - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - ContourLine Gkjdpfx Ahoz Rl Eiedoc - FastLine - FlyLine - AdjustLine - Teleservice via Internet Data transfer - USB interface - RJ-45 network connection - Wireless Operation Point (basis for Visual Online Support) Safety - CE marking - Light curtains - Multi-chamber extraction system - Compact dust collection system - Machine enclosure, certified viewing window, door on the right - Sliding roof - Nozzle changer - CoolLine

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 11,800 h, laser power: 3,200 W, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 4 mm, No minimum price – guaranteed sale to the highest bidder! Includes SheetMaster, ToolMaster, GripMaster! TECHNICAL DETAILS Laser power: 3,200 W Laser type: CO₂ laser TruFlow 3200 Combined punching/laser working area: 3,000 × 1,500 mm Punching mode working area: 3,000 × 1,500 mm Laser mode working area: 3,000 × 1,500 mm Max. sheet thickness, structural steel: max. 8 mm Max. sheet thickness, stainless steel: max. 8 mm Max. sheet thickness, aluminum: max. 4 mm Max. punching force: max. 220 kN Max. punching stroke rate at E = 1 mm: max. 900/min Max. marking stroke rate: max. approx. 2,800/min Max. number of multi-tools with 3 clamping units: max. 18 Tool capacity: 180 tools Max. axis speed X/Y simultaneously: max. 108 m/min MACHINE DETAILS Operating hours: 11,800 h Laser on time: 42,100 h EQUIPMENT SheetMaster ToolMaster GripMaster Large-format working area without repositioning Linear magazine with multi-tools SheetMaster with two large-format tables Gkjdpfxez Izu To Ahdsc Automatic scrap sheet removal to lifting table

Condition: used, functionality: fully functional, Year of construction: 2007, machine/vehicle number: A0100A0637, laser type: CO₂ laser, laser source manufacturer: trumpf, laser power: 2,000 W, input voltage: 24 V, input current: 100 A, input frequency: 4,000 Hz, type of input current: three-phase, type of cooling: water, year of last overhaul: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Trumpf Trumatic 6000, manufactured in 2007 – still in use and fully operational (used for stainless steel sheets, 0.8 – 2 mm thick). Gjdpfx Ahez Iwvgjdokc

Condition: used, Year of construction: 2019, functionality: fully functional, total width: 2,300 mm, total height: 2,500 mm, total length: 6,500 mm, type of input current: three-phase, number of previous owners: 1, The machine is in good working condition and suitable for daily use. It is equipped with 4 nail guns. Two MAX CN80 nail guns with a jumbo magazine. Two MAX CN55 nail guns. Gksdpfx Ahjz Nyfbedoc The price is available upon request.

Condition: like new (used), Year of construction: 2016, operating hours: 500 h, functionality: fully functional, spindle speed (max.): 24,000 rpm, Gravograph IS 6000 IQ – CNC engraving machine – approx. 500 operating hours For sale is a very well-maintained Gravograph IS 6000 IQ with only approx. 500 operating hours. The machine is suitable for engraving and milling operations, for example, for the production of signs, lettering, and custom engravings. Machine data: Manufacturer: Gravograph / Gravotech Model: IS 6000 IQ Year of manufacture: 05/2016 Operating hours: approx. 500 Condition: used, very well maintained Equipment: Engraving software GS8-GRAPHIC incl. dongle Sturdy machine table with T-slots for workpiece clamping Matching base frame Wired hand control unit Gksdez D Htgopfx Ahdjc Extraction system on the machining head Spraying device 750 W high-frequency spindle kit for the IQ series according to the order confirmation from November 2017 The machine was purchased in December 2016. Its excellent condition and low usage with only approx. 500 operating hours are particularly noteworthy. Price: net 12,500 EUR Location: 09627 Bobritzsch-Hilbersdorf Availability: immediately If you are interested, we look forward to receiving your inquiry.

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 62005_2.0x3.0-30HP, table length: 3,000 mm, table width: 2,000 mm, year of last overhaul: 2025, total length: 3,500 mm, total width: 2,500 mm, Equipment: safety light barrier, NEC / DUAL HEAD Power Jet Systems Multi-Axis Waterjet Cutting Table Sold with x2 Digital Control High-Pressure Waterjet Pumps HP Pump Models: SX 222 V3 (Yr. 2005) Pump & SX 245 Pump (Yr. 2001) Plus, includes KMT Abrasive Hopper TWIN HEAD Industrial CNC Waterjet Cutting System: Manufactured by NEC Power-Jet Systems, this heavy-duty multi-axis waterjet cutting table is designed for precision cutting applications using pure water and/or abrasive waterjet technology. The machine features a rigid steel box-frame construction with integrated water tank, servo-controlled motion system, and industrial CNC control software. Suitable for engineering, fabrication, stone, glass, plastics, composites, rubber, foam, and metal cutting applications. Key Features: Multi-axis CNC waterjet cutting table Precision Ball Screw or Precision Rack & Pinion drive systems Linear bearing slideways Baldor digital servo motors and drive system Touchscreen operator interface Dedicated waterjet cutting software Integrated water tank/cutting table Adjustable water level system Abrasive distribution system mounted on gantry or Z-axis carriage Pure water and abrasive cutting capability Multi-head cutting configurations available Heavy-duty steel framework construction Stainless steel and anodised aluminium wetted components CAD/CAM compatibility with kerf compensation Nesting and material optimisation capability Dry-run facility and programmable jogging functions Technical Specification Construction Rigid heavy-duty steel framework Integral cutting tank and table Enclosed drive systems Cable trunking for protected service routing Local abrasive transfer unit Stainless steel and anodised aluminium wetted parts Integrated operator panel and electrical controls Motion System Precision Ball Screw drive (MaxiJet models) Precision Rack & Pinion drive (MidiJet models) Linear bearing guideways Baldor digital servo drives and motors Multi-axis configurations available: 2, 3 or 5-axis systems Software & Control Proprietary Power Jet cutting software CAD/CAM import capability Kerf compensation Material nesting and optimisation options Programmable jog speed control Home and return-home functions Dry-run programme verification Standard Machine Sizes MaxiJet: High-precision CNC waterjet table Ball screw drive system Standard cutting area: 2m x 3m Applications / Suitable for cutting: Steel Stainless steel Aluminium Stone Glass Plastics Rubber Foams Composite materials Technical engineering materials NEC Power Jet CNC Waterjet Cutting Machine | Multi-Axis Abrasive Waterjet Table | Servo Controlled Search Keywords Gsdoz Nll Hepfx Ahdokc Waterjet cutter, CNC waterjet, abrasive waterjet machine, pure waterjet cutter, Power Jet Systems, MaxiJet, MidiJet, industrial cutting table, CNC cutting machine, water jet cutting system, fabrication equipment, engineering machinery.

Condition: good (used), functionality: fully functional, Year of construction: 2009, controller model: Siemens Sinumerik 840D, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Working area 3050 x 1550 mm - Hi-Las high-pressure cutting - Cutting head quick-change system - Programmable cutting gas selection/pressure adjustment - Capacitive height control APC - Function: ContourLas - Slag cone detection - Compact dust extraction system - Tank heating - Automatic tool changer with 19 stations (21 – clamping jaws) - 2 clamping jaws - Rotation of all tools - NC-controlled, digitally operated, maintenance-free three-phase drives - Automatic repositioning - Tool length compensation - Rapid shutdown of the hydraulics - Automatic shutdown - Automatic indexing slides, each 500 x 500 mm - Sensors for both indexing slides - Slug extraction - Forming capability - Programmable stamping tool lubrication - Programmable clamping device - Adaptive stroke length control - Safety devices - RJ 45 network connection - 3.5'' floppy disk drive + 5'' cutting head + 9" cutting head Godpez Rl Uqjfx Ahdskc + FocusLine + MultiTool function + Thread forming function + Signing/quick beading function + Deburring and rolling technology function + Softpunch function + Additional clamping jaw + Repositioning cylinder + Vibration-damped installation + Blow-out device for small parts + Chip conveyor with tilting container

Condition: new, Year of construction: 2025, functionality: fully functional, air demand: 200 m³/h, total width: 2,400 mm, total height: 2,350 mm, total length: 3,500 mm, Cartridge filter system MBX-6000 with 8 cartridges. Suitable for filtering all types of dust, e.g. wood, sand, etc. Effective air output: 6000 m³/h, electric motor 9 kW, 3x400 Volt, 50Hz, filter area: 104 m² (8x13 m²), filter class: M, according to DIN 60335, filter cleaning: pneumatic, 10 min run-on. Dust containers: 4 pcs, each 30 liters. Clemco blasting pot (used), 100 liters Gkjdjx Ai Hpepfx Ahdjc Screw compressor Renner RSK 1-30, year of manufacture 2020, 1178 operating hours.

Condition: excellent (used), Year of construction: 2021, operating hours: 200 h, functionality: fully functional, machine/vehicle number: 220247, total length: 18,000 mm, total width: 4,000 mm, total height: 3,000 mm, input frequency: 50 Hz, input voltage: 400 V, pressure: 7 bar, The HE 500 is a double-edging line – L-shaped – consisting of 2 grinding machines connected at an angle. The first machine is designed for processing wider sheets of glass, while the second is for narrower sheets. At the inlet of the second machine, there is a centering device that corrects the position of the glass. Technical specifications of HE500: Minimum working size – 400x200, Godpfx Ajzznuijhdjkc Working thickness – 3 – 25, Oscillating spindle – 1+1, Diamond spindles for grinding flat edges – 2+2 Diamond spindles for grinding bottom bevels – 1+1 Polishing spindles for bottom bevels – 1+1 Diamond spindles for grinding top bevels – 1+1 Polishing spindles for top bevels – 1+1 Polishing spindles for flat edges – 3+3 Spindles for rounding corners – 1+1 Engraving spindle – 2+2 Empty positions – 0 Total power of the XE line installation (kW) – 120 Conveyor belts, motorization: Belts driven by 4 brushless motors Mobile bridge movement Ball bearing guides, controlled by two brushless motors Summary: Bavelloni HE500L Double Edging Line – 1 set. TT5130 feeding table – 1 piece. Horizontal washing machine 2800 – 1 piece.

Condition: used, Year of construction: 2024, controller manufacturer: Siemens, controller model: Sinumerik ONE, _____ Description: Year of manuf. : 2024 Control : Siemens Sinumerik ONE Speed : 8000 rpm Movement X/Y/Z : 1000/1000/1000 mm Tool holder : HSK-A100 Spindle: Technology:Gearbox Spindle Speed:8.000 rpm Power (max.):60 kW Torque (max.):1.146 Nm Taper:HSK-A100 NC-Roundtable: B-Axis:0,001° Palletsize:630 x 630 mm In general: Toolmagazine:425 stations Gkedpfez N Rbgjx Ahdsc Rapid travers in X/Y/Z:50 m/min Equipment/Accessory: Positionsensor:Direct Scales in all Axes Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with paperbelt-filter and high-pressure, 70bar Workpiecemeasurement:Touchprobe, Renishaw RMP60 Toolbreakagecontrol:Taktil Softwareoption:Process-integrated tool monitoring Automation I:Palletchanger, 2 stations Automation II:Interface FASTEMS MLS Oilmistseparation:Interface mechanical prepared Further Accessory:Rinsing pistol

Condition: good (used), functionality: fully functional, Year of construction: 2014, machine/vehicle number: D1101C3066, laser type: CO₂ laser, laser power: 6,000 W, total length: 1,145 mm, total width: 1,035 mm, total height: 620 mm, Equipment: CE marking, TruFlow 6000 laser resonator by Trumpf for sale. Godpfeyt Dchjx Ahdjkc The resonator is in good used condition and operates flawlessly. Two identical units are available (price is per unit).

Condition: used, Year of construction: 2006, operating hours: 22,000 h, functionality: fully functional, EQUIPMENT FOR TRANSPORT AND MANIPULATION OF RAW MATERIALS The equipment consists of:  Mercedes Actros container truck  Two containers with a volume of 10 to 20 m3 for sawdust  Liebherr bulk loader Equipment condition:  In good condition EQUIPMENT FOR THE PREPARATION OF RAW MATERIALS The equipment consists of:  Waste bin with movable floor - volume approx. 10 m3  Pneumatic transport systems with filter  Conveyor belts and augers  Sawdust dryer with biomass burner  Hammer mill for chopping wood chips with associated equipment  Control cabinets for each piece of equipment Capacity of the complete plant:  About 2 t/h of dried sawdust Equipment condition: Gedez I Tm Ujpfx Ahdskc  Completely overhauled BRIQUETTING PRESS WITH SAW AND PACKING UNIT Full capacity is 3,5T/h A complete briquetting line consisting of the following:  Briquetting press BP6000 CFN consisting of: o Silos for raw materials o Dosing screw o Oil and press head cooling system o Original press head and cooling line for briquettes with a diameter of 90 mm for hardwood o Manual and automatic control system o Current condition: the press has been 100% serviced and all vital parts of the press have been changed so that it is like new ones o Large quantity of spare parts in stock including spare axle and eccentric  Saw for cutting briquettes BRIDGE o Current condition: the equipment has been fully serviced  Automatic packaging machine for briquettes ROSMAN o Current condition: the equipment has been completely serviced and a new control cabinet has been made

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Niles N 40 MC - 6000 Turning/Milling Center, year of manufacture 2019, Siemens SI 840 D SL control, X/Z 850/6820 mm, Y axis -200 / +400 mm, B axis 0.001°, B axis swivel range -105° / +95°, tool changer with 192 positions, C axis main spindle 0.001°, spindle speed up to 1750 rpm, 2 gear stages, max. workpiece weight between chuck and tailstock 6,000 kg, drive power 87 kW, HSK 100 interface, steady rest 70 - 425 mm, tailstock. Gkedpfx Ahjz Dgw Ssdsc

Condition: used, Year of construction: 2010, machine/vehicle number: VG6000 3224, Equipment: documentation/manual, Koike Versagraph 6000, including cutting tables. Excluding strips. The machine was fully functional until April 2022. Gjdpfjzdz U Usx Ahdskc It has been disassembled and stored since 2022. Original new price: 450,000 euros.

Condition: ready for operation (used), Year of construction: 2020, total width: 2,200 mm, total height: 2,180 mm, overall weight: 2,600 kg, cutting length (max.): 6,150 mm, product length (max.): 8,015 mm, Circular Wood Saw manufactured in 2020. This CENTAURO SL Gold 6000 features a cutting length of 5,900–6,150 mm, a cutting height of 160 mm, and a cutting width of 600 mm. It is equipped with a saw blade diameter of 550 mm and an adjustable blade feed speed of up to 80 m/min. If you are looking to get high-quality cutting capabilities, consider the CENTAURO SL Gold 6000 machine we have for sale. Contact us for further details. • Cutting length: 5,900–6,150 mm • Cutting height: 160 mm • Cutting width: 600 mm • Saw blade diameter: 550 mm • Blade feed speed: adjustable 0–80 m/min • Blade motor power: 11 kW / 15 HP • Total installed power: 12.85 kW • Electronic control: TOP7, 7" touchscreen • Ethernet connection Gksdpfx Ahoz Iyanjdjc • Pneumatic operating pressure: 6 bar • Dust extraction outlets: 2 × Ø130 mm + 1 × Ø200 mm • Two-speed fence movement • 3-position saw blade height • Blade feed with gear motor and 3-phase inverter

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, We are selling this lathe, which has already been disconnected and is stored in our warehouse. A video of the machine can be sent via WhatsApp. The machine does not have steady rests. Swinging diameter over the bed: 1320 mm Swinging diameter over the carriage: 950 mm Turning length: 6,000 mm Gjdpfjz En Dvjx Ahdekc Max. workpiece weight: 14,000 kg Machine weight: 18,500 kg General overhaul performed in 2009.

Condition: used, Year of construction: 2013, HELLER 7 Machines: H 6000 MCH 280 MCH 250 We offer, directly on behalf of the owner, the following machines due to a site relocation: 7 x HELLER 4-axis horizontal machining centers Manufacturer: Heller 1. Type: H 6000 Year of manufacture: 2011 Operating hours: 28,338 Control: Simumerik 840 D solution line Travel X/Y/Z = 1,000 x 1,000 x 1,000 mm Pallet changer: 2-position Tool positions: 150 Gksdpez Ihpwsfx Ahdjc 2. Type: H 6000 Year of manufacture: 2009 Operating hours: 33,963 Control: Simumerik 840 D solution line Travel X/Y/Z = 1,000 x 1,000 x 1,000 mm Pallet changer: 2-position Tool positions: 165 3. Type: H 6000 Year of manufacture: 2013 Operating hours: 26,025 Control: Simumerik 840 D solution line Travel X/Y/Z = 1,000 x 1,000 x 1,000 mm Pallet changer: 5-position Defect in spindle / B-axis 4. Type: MCH 280 Year of manufacture: 2011 Operating hours: 44,454 Control: Simumerik 840 D Travel X/Y/Z = 1,000 x 1,000 x 1,000 mm Pallet changer: 5-position Tool positions: 100 5. Type: MCH250 Year of manufacture: 2008 Operating hours: 49,905 Control: Simumerik 840 D Travel X/Y/Z = 800 x 800 x 800 mm Pallet changer: 2-position Tool positions: 100 6. Type: MCH250 Year of manufacture: 2008 Operating hours: 43,820 Control: Simumerik 840 D Travel X/Y/Z = 800 x 800 x 800 mm Pallet changer: 5-position Tool positions: 100 7. Type: MCH250 Year of manufacture: 2007 Operating hours: 58,084 Control: Simumerik 840 D Travel X/Y/Z = 800 x 800 x 800 mm Pallet changer: 2-position Tool positions: 100 The sale is without clamping devices and tool holders. Further details and technical information are available upon request.

Condition: repair required (used), Year of construction: 2009, operating hours: 4,131 h, functionality: limited functionality, number of ink cartridges: 8, color channels: 8, number of print heads: 1, We are selling our Epson printer, which is no longer needed. It has been stored in our warehouse for a few years and was used to print photos in the garage. The print head is likely defective, and it does not recognize the cartridges on the left side, indicating that they are empty, even though they are full. Includes software and automatic paper roll feed. I did not connect it to the network, so I can only provide the number of pages printed: 4131 pages. Sold as is, with defects. Gkedpfx Ahozi Svmsdec We didn't use it much because we mostly print on our plotter. Inspection is possible.

Condition: good (used), Year of construction: 2011, functionality: fully functional, Horizontal machining center MAZAK Model: HCN 6000 Year: 2011 Control unit: MAZATROL MATRIX 2 X-axis travel: 800 Y-axis travel: 800 Z-axis travel: 800 Table length: 500 Table width: 500 Maximum workpiece size (length x width x height): D.900 x H.1000 Table surface: Tapped holes Maximum workpiece weight: 1000 Spindle speed: 7000 Spindle connection: ISO 50 Torque (continuous / 10 min): 680 Nm Rapid traverse rate X-axis: 60000 Rapid traverse rate Y-axis: 60000 Gkedpfsz Apacox Ahdoc Rapid traverse rate Z-axis: 60000 Number of tools: 60 Maximum tool diameter: 250 Maximum tool length (from reference line): 500 Tool selection method: Fixed Maximum tool weight: 30 Kg Tool change time: 5 sec. Pressure: 50 BAR Height: 3350 Width: 2820 Depth: 6755 Weight: 14700 Tool kit included