Used Barford Sxr 7000 for sale (705)

Condition: new, For sale: Professional carrying harness for self-contained breathing apparatus (SCBA) Dräger PSS 7000 • Model: PSS 7000 • Pressure gauge: up to 300 bar • Part No: 3355850 • Type No: 3355068 • Technical condition: good • Complete set of straps and buckles • Sturdy frame with no cracks Selling exactly what is shown in the photos. No cylinder or face mask included. Firefighter-grade equipment – top series from Dräger. Bodpey Ilvgsfx Abbewl

Condition: excellent (used), functionality: fully functional, power: 56 kW (76.14 HP), fuel type: diesel, operation weight: 18,000 kg, Year of construction: 2021, operating hours: 350 h, Feed hopper volume: 5 m³ Operating position dimensions: 11,444 x 10,576 mm (LxW) Engine type / power: Catertpillar 4.4 / 56 kW Screen box: 3,660 x 1,280 mm (LxW) Bedpfsrh E Evex Abbswl Weight: 18,000 kg Throughput: approx. 400 t/h

Condition: new, Year of construction: 2024, Conveyor belt: hydraulic folding in and out Bsdsikqxtepfx Abbswl Scraper: front and rear scraper Conveyor belt length: 25.000 mm Engine: Caterpillar 4.4 Fixid Speed Engine 133 HP Crawler track: floor plates 400 mm Discharge height 22,5° / 27,5°: 8.8200 / 11.000 mm Conveyor belt width: 1.200 mm Feed hopper: Capacity 8 m³

Condition: good (used), Year of construction: 2023, operating hours: 1,031 h, functionality: fully functional, overall weight: 18,999 kg, Belt width: 1,200 mm Belt length: 30,500 mm Dimensions in working position: 28,219 x 2,489 x 12,268 mm (L x W x H) Discharge height at 22° inclination: 12,268 mm Bsdoyw Hluspfx Abbjwl Engine manufacturer: Cat C2.8 Operating weight: 18,999 kg Transport dimensions: 16,078 x 2,489 x 3,149 mm (L x W x H) Engine power: 55 kW Throughput: approx. 700 t/h

Condition: refurbished (used), battery capacity: 930 Ah, battery voltage: 80 V, total height: 880 mm, total length: 2,460 mm, total width: 735 mm, Tested forklift battery for your forklift - 80V 6PZS 930Ah - special tray + 1 year warranty + Including aquamatic system + Including end discharge device & REMA 320 connector (other connectors available on request) + Capacity: minimum 90–100% (C5 capacity protocol will be supplied upon delivery) + Year of delivery: 2024 Dimensions: Length: 2,460 mm Width: 735 mm Height: 880 mm Weight: approx. 2,300 kg Suitable for the following models and others: Still MX-X Crown TSP 7000 Bulmor EQN 40-50 Bjdpfxswzvw Ij Abbewl Caterpillar EP50N Daewoo B40 X Dimos BMS 30/89 Doosan B45X-5 Doosan B50X-5 Hubtex MQ 45 Hubtex MQ 70 Hubtex MSU 40 Hyundai 50B-9 Hyundai B40-9 Steinbock-Boss WA 15 Kalmar EC 4-500 Kalmar ECD 50-6 Kalmar ECD 55-6 Kalmar ECE 50-6 Kalmar ECF 70-6 Kalmar ECG 55-6 Common battery sizes available; please enquire. Transport possible.

Condition: excellent (used), Year of construction: 2011, For sale: fully functional GAS BURNERS, G70, 7,000 kW, including control cabinet and control unit, gas section DUNGS DN 80. WEISHAUPT Model: G70/1-B Version: ZM-LN Output: 700–7,000 kW Year of manufacture: 2011 - Delivery available upon request - All technical data can be seen in the pictures Preferred sale to dealers, commercial operators, or for export. All information provided without guarantee; subject to errors and prior sale. Bjdeign Iwopfx Abbowl The seller assumes no liability for typographical or data transmission errors.

Year of construction: 2020, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: KE-TR6536-C-A-442, Stockpile conveyor for direct feeding via crushing / screening plant. TECHNICAL DETAILS stockpile capacity: up to 300 t/h at an angle of repose of 37°. Bulk density: 1,7kg/dm³ stockpile capacity (rotation 0°): 2500 t stockpile capacity (rotation 90°): 8500 t stockpile capacity (rotation 180°): 15000 t Feed size: 0 / 200mm Conveyor belt length: 18252 mm (AA) conveyor belt width: 900 mm Discharge height: max. 8320 mm Rubber belt: 3 ply smooth including conveyor belt scraper track length: 2500mm plate width: 400mm Perkins diesel engine: 37kW Bjdpfx Asmv E Igebbjwl own weight: approx. 8000kg FURTHER - Cable remote control for crawler - head piece hydraulically foldable - central lubrication point

Year of construction: 2022, operating hours: 0 h, condition: new, functionality: fully functional, Stockpile conveyor for direct feeding via crushing / screening plant. Machine is unused and new! TECHNICAL DETAILS stockpile capacity: up to 300 t/h with angle of repose 37°. Bulk density: 1,7kg/dm³ stockpile capacity (rotation 0°): 2500 t stockpile capacity (rotation 90°): 8500 t stockpile capacity (rotation 180°): 15000 t Feed size: 0 / 200mm Conveyor belt length: 18252 mm (AA) conveyor belt width: 900 mm Discharge height: max. 8320 mm Rubber belt: 3 ply smooth including conveyor belt scraper track length: 2500mm plate width: 400mm Perkins diesel engine: 37kW Bwodpepdqr Eefx Abbel own weight: approx. 8000kg FURTHER - Cable remote control for crawler - head piece hydraulically foldable - central lubrication point

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 5,300 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,000 mm, spindle speed (max.): 1,800 rpm, table length: 7,000 mm, TECHNICAL DETAILS Travel range X-axis: 5,300 mm Travel range Y-axis: 1,500 mm Travel range Z-axis: 2,000 mm Table size: 7,000 x 1,000 mm Tool holder: SK 50 Spindle speeds: 12.5 – 1,800 rpm Spindle motor: 22 kW Feed rate range: 6 – 10,000 mm/min Rapid traverse: 15 m/min Number of tool changer positions: 24 MACHINE DETAILS Total power requirement: 70 kW Bedsy Dg I Nspfx Abbowl Dimensions & Weight Space requirements: approx. 8.7 x 4.7 x 4.1 m Machine weight: approx. 30 t EQUIPMENT Electronic handwheel Automatic swivelling milling head, vertical/horizontal 2 x 180° Milling head swivels automatically in the rear axis 72 x 5° Automatic tool changer (ATC 24) Coolant system Extended cross travel (Y-axis) 1,500 mm Extended vertical travel (Z-axis) 2,000 mm

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, clamping force: 7,845 kN, screw diameter: 105 mm, injection weight: 3,760 g, overall weight: 64,000 kg, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 800 tons Tie bar spacing: 100 mm x 100 mm Bwsdpfx Aey Ewqqsbbjl Screw diameter: 105 mm Shot weight: approx. 3,760 g MACHINE DETAILS Weight: 64 t Note: When purchasing multiple items from the same location (see offers below), you will only be charged the lower costs for dismantling and loading.

Condition: good (used), axle configuration: 3 axles, first registration: 12/2016, total length: 10,400 mm, total width: 2,550 mm, total height: 900 mm, suspension: air, tire size: 205/65R17,5, color: other, Year of construction: 2016, Equipment: ABS, = Additional Options and Accessories = - EBS - Hydraulic system - Alloy wheels = Notes = Number of axles: 3, twin tyres, unladen weight: 6,860 kg, gross weight: 23,800 kg, alloy wheels, suspension type: full air, ABS, EBS, hydraulic system, max. number of cars: 3, axle type: BPW = Further Information = General Information Cab: Day cab Registration number: KLEYN1 Driveline Fuel type: Diesel Transmission Gearbox: Manual transmission Axle Configuration Tyre size: 205/65R17.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Twin tyres; left inner tread: 8 mm; left outer tread: 8 mm; right inner tread: 9 mm; right outer tread: 8 mm Axle 2: Twin tyres; left inner tread: 11 mm; left outer tread: 10 mm; right inner tread: 10 mm; right outer tread: 9 mm Axle 3: Twin tyres; left inner tread: 9 mm; left outer tread: 10 mm; right inner tread: 8 mm; right outer tread: 8 mm Weights Unladen weight: 6,860 kg Payload: 16,940 kg Gross vehicle weight: 23,800 kg Functional Max. number of cars: 3 Environment Emission class: Euro 0 Bwsdpfey Inccex Abbsl Condition Technical condition: good Visual condition: good Damages: none = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our offering covers all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-moving inventory • Recognisable quality • Great pricing • Proper business practices • We speak many languages • We understand our customers • Import and transport support • (Export) registration plates arranged quickly • Expert technical services • The assurance of 'recognisable quality' • And much more.... Please visit our website for special offers and complete stock list: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an enquiry via our website. Ask about our European warranty package directly.

Condition: like new (used), Year of construction: 2022, operating hours: 120 h, functionality: fully functional, The Red Rhino 7000 is a mobile (mini) jaw crusher – essentially a self-contained, movable crusher that uses one fixed and one movable jaw to crush material. - Crushing principle: Jaw crusher – large, wear-resistant jaws made of manganese steel. Bsdsy It Tgjpfx Abbjwl - Inlet size: approx. 700 mm × 400 mm – this is the maximum material size the crusher can handle at one time. - Capacity: up to approx. 45 tons/hour (depending on material quality). - Drive: Diesel engine (e.g., Deutz, approx. 66–70 hp, but the exact engine size depends on the specific model). - Output size: adjustable between coarse and fine (e.g., 10–120 mm), resulting in variable particle size of the crushed material. - Mobility: Tracked or rubber-tired chassis → easy to move across terrain. - Control: often via radio remote control. What is it used for? - Crushing construction waste - On-site crushing of concrete, reinforced concrete, bricks, and stones for reuse or easier handling. - Recycling

Condition: ready for operation (used), Year of construction: 2010, laser power: 3,600 W, travel distance X-axis: 6,500 mm, number of axes: 5, This TRUMPF TruLaser Tube 7000 KT02 was manufactured in 2010. It features a working area of 6500 mm on the X-axis and can handle circular diameters up to 200 mm. Equipped with a CO₂ laser TruFlow 2000 and a laser cutting head with a 155 mm lens, it's ideal for precise tube cutting. Contact us for more information about this machine. • Circular diameter: 200 mm • Reject station: 3 m with brush table • Reject tray • Process/software features: NoLine, PowerLine, ContourLine, Laser power control, Programmable cutting pressure, Program repeat, Automatic blow-off, Work interruption lighting, Hole-punching function (laser) • Laser: CO₂ laser TruFlow 2000 • Laser cooling unit • Cutting head: Laser cutting head with 155 mm lens • Control unit: 84D • Connectivity/data transfer: RJ-45 network connection, USB connection; network connection incl. installation • Safety: CE marking, Multi-beam light barriers, Capacitor power 1600 N/cm², Safety with macro stops Additional equipment • Accessories: • Spare parts case for cutting heads • 1 x remote control kit • Clamping jaw set Ø 216 / 200 mm • U-shaped guide rails for reject station with ID = 200 mm • Automation: • LoadMaster Tube 6 m with belt support, 2 grippers • Options for LoadMaster Tube 6 m: • Circular diameter 250 mm • Shorter belt support • Swivelable conveyor section • Additional gripper Ø 200 mm • Additional gripper Ø 250 mm Bwsdpfx Abex D I H Djbjl • Special equipment: • Flexible reject station 4.5 m (prototype) instead of reject station 3 m, without brush table • Special installation for flexible reject station • LoadMaster (series version 103) • Installation 100 mm higher (use of wire mesh container possible), decision upon acceptance • Services: • Installation, commissioning, training

Condition: used, Year of construction: 2013, Punching capacity 220 kN laser capacity in Watt 4000 Bwsdpfx Aboy D T S Usbel travel -x axis 2500 mm travel -y axis 1250 mm Cutting capacity structural steel 8 mm Cutting capacity stainless steel 8 mm Cutting capacity aluminum 6 mm workpiece weight 280 kg weight of the machine ca. 24.000 kg dimensions 10130 x 8898 x 2328 mm

Condition: used, power: 22 kW (29.91 HP), Year of construction: 2003, Circular vibrating screen Screen area: 7,000 x 2,250 mm Motor stand with drive components Lower deck with piping and spray system Bwodpfx Aeulu Nbobbol

Condition: new, Year of construction: 2025, THE ECONOMICAL MANDREL BENDING MACHINE FOR TIGHT BENDING RADII. For tube dimensions from 20 - 90 mm, this bending system offers solutions for complex geometries with standard radii of 2xD. Depending on material quality and wall thickness ratio, radii of 1.5xD can also be realized suitable for series production. With a tool height of 120 mm, there are also sufficient options for special profiles. The extremely precise and powerful electric drive of the bending axis as well as the stable and rigid construction of the mandrel carrier and the bending arm also contribute to the desired bending result. The plug-in bending tools allow a quick changeover to other tube dimensions. The clamping pressure for the tube clamping can be optimally adjusted. The PLC control (can be expanded as required via USB stick) with data memory and the latest X2X interface can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for a maximum of 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The control system has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. Also available with pneumatic rotation stop or with gear-assisted length and twist positioning. POSSIBLE AREAS OF APPLICATION: - Plant engineering, e.g. chemistry - hydraulic piping - metal construction- prototype construction- pipeline construction TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mmbending capacity 9000: Ø 20 to 90 x 5 mm depending on the material- bending radius min/max: 40 mm/250 mm- Bending radii min: 1.5 x Ø (standard 2 x Ø ) - Multifunction machine control Bending angle adjustment (0,1°) - Mandrel support lengths 3000/4500/6000 mm - Maximum 180º bending result - Weight 1600-3200 kg (depending on version) - Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Bwedpfx Aenh R Suebbel - Automatic mandrel lubrication (minimum quantity) - Pneumatic or hydraulic quick chuck - Larger bending radius up to 300 mm - Positioning of the length and twist via automatic brake function or via manual stops by foot switch - Semi-automatic positioning of the length and twist via servo motors - Automatic tool retraction - Pipe calculation software - 10 inch touch screen with integrated tube calculation - Data transfer via cable (LAN), via radio (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via - the company JUTEC - Service contracts, maintenance at your site

Condition: used, mileage: 190,447 km, power: 112 kW (152.28 HP), first registration: 10/2000, fuel type: diesel, overall weight: 7,490 kg, Equipment: crane, Well-maintained Mercedes Atego 815 equipped with a Palfinger PK 7000 crane featuring radio remote control, 2 hydraulic and 2 mechanical extensions, and a maximum working height of 13 m. German vehicle, single owner. Palfinger PK 7000 specifications: Working height: 13 m Max. lifting capacity: 2,960 kg Lateral outreach: 1.80 m – 2,960 kg 3.40 m – 1,790 kg 5.10 m – 1,160 kg 6.90 m – 870 kg 2 mechanical extensions: 8.90 m – 600 kg 10.90 m – 370 kg Radio remote control Flatbed dimensions: Length 4,200 mm, Width 2,450 mm Bwodpox Rtfhofx Abbel Payload at 7,490 kg GVW: 1,970 kg Payload at 8,600 kg GVW: 3,080 kg Rockinger trailer coupling Towing capacity: 10,500 kg Auxiliary heater German vehicle Single owner Differential lock Radio Roof hatch Financing options available through our partner banks; we are happy to assist you. Please note that the vehicle is also advertised on other platforms, and we reserve the right to prior sale. All accessory specifications are provided without guarantee. Subject to changes, prior sale, or errors. We strongly recommend and offer viewing and inspection, so that you can assess the vehicle's condition and suitability. Viewing and inspection are possible at any time by appointment and are expressly encouraged.

Condition: used, Year of construction: 2009, The HSB 7000, manufactured by Hohner in 2009, is a reliable machine with a serial number of 07.089. This machine has dimensions of 390 x 350 mm and is currently in good condition and operational within a printshop located in Germany. The HSB 7000 is capable of handling a maximum untrimmed size of 390 x 350 mm when manually fed, and it can manage products with a maximum thickness of 4 mm. Its robust construction and maintained condition make it a valuable asset for any printshop looking to enhance its production capabilities. Format: 390 x 350 mm Max. Paper Thickness: stitching thickness max: Speed: mechanical speed: from 20 Power: 3N 400 V, 50/60 Hz, maks Bwjdswza Epspfx Abbjl Equipment: Untrimmed size 350 x 390 mm Trimmed sizes 80 x 120 - 340 x 380 mm4 mm Stations 6 feeders + 1 Finisher stitcher with 2 Hohner 52/8 + 3 knife trimmer Delivery on a belt Speed 2.000-7.000 cycles p-h 2 Hohner Universal 52/8 stitching heads 2 compressors

Condition: used, Year of construction: 1995, CNC Gantry Flame Cutting Machine Manufacturer: Messer Model: Omnimat P 7000 Year of manufacture: 1995 CNC control: Global Control Plus Bwsdpfoyay Dhex Abbsl Track gauge: 7,000 mm 8 x oxy-fuel torches type ALFA 8 x Omnilift 200 Without rail track Without table Without filter 16426

Condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer -Heavy-duty transport wagon: Industrial trailer with single-axle turntable steering Bodpsyzd R Nsfx Abbewl -Platform: 7000/2000/H910 mm -Load capacity: 21 t -Tires: Vorwerk 645/300-410 solid rubber -Drawbar length: 1900 mm -Transport dimensions: 7000/2000/H910 mm -Weight: 2630 kg

Condition: used, Year of construction: 2012, operating hours: 10,000 h, machine/vehicle number: TP109, Used Capping Machine AVE 6T up to 7000 bph The used capping machine AVE 6T up to 7000 bph delivers high efficiency and versatility for the bottling industry. Specifically, it handles medium to high-speed production lines, ensuring consistent and reliable results. Furthermore, the machine for Stelvin Lux uses six capping heads to provide precise and uniform operation throughout every bottling cycle. Moreover, its design maximizes production speed, enabling the handling of up to 7000 bottles per hour. This performance, in turn, supports businesses aiming to improve operational efficiency and maintain consistent product quality. The system supports aluminum screw caps of the Stelvin Lux type, measuring 30×60 mm. Consequently, this cap type creates an airtight seal, preserving product integrity and extending shelf life. Producers in the wine and beverage industry often choose this format for its reliability. Additionally, the machine rotates clockwise, aligning with standard bottling line layouts and reducing the need for costly modifications. Its compact design, moreover, integrates smoothly into existing production environments, even when space is tight.  Safety Features and User-Friendly Maintenance The used capping machine AVE 6T up to 7000 bp enhances safety by incorporating advanced protective features. For instance, these systems shield operators from potential risks, reducing accidents and improving workplace safety. Furthermore, the safety mechanisms allow operators to access and maintain them quickly, ensuring consistent compliance with industry standards. The technical manuals of Stelvin Lux, in addition, offer clear instructions for installation, maintenance, and troubleshooting. These guides, therefore, enable operators to resolve issues efficiently, minimizing downtime and preserving productivity. Additionally, the machine’s modular design allows technicians to replace components quickly, streamlining maintenance tasks and lowering repair costs. Current State and Electrical Requirements Bwodpfjvgvabex Abbjl The machine for Stelvin Lux currently remains in storage, ready for immediate installation on a new production line. Moreover, it operates at 400 V, with a power requirement of 3 kW and a frequency of 5 Hz. Therefore, users should verify these specifications to confirm compatibility with their existing electrical systems. Furthermore, the machine’s low energy consumption supports production facilities in reducing operational costs without compromising performance. Robust Performance and Durability of Stelvin Lux Thi machine withstands demanding production environments with its durable construction. Notably, its six capping heads ensure consistent quality in every operation, maintaining high production standards. Consequently, businesses rely on this machine to meet ambitious production goals while preserving the integrity of their products. Moreover, its precision and efficiency make it a valuable asset for any bottling operation. Conclusion of teh Used Capping Machine AVE 6T up to 7000 bph The used capping machine AVE 6T up to 7000 bph offers an effective and reliable solution for bottling operations. In particular, it boosts efficiency by combining precise capping heads, strong safety features, and simple maintenance requirements. Additionally, its seamless compatibility with standard production lines and energy-efficient operation provide ...

Condition: excellent (used), max. workpiece diameter 600 mm threading length 7000 mm max. module 8 / 12 min. module 1 swival range ° diameter of hob 63 - 140 mm spindle turning speed - stepless 45 - 450 U/min weight of the machine ca. 12,5 t dimensions of the machine ca. 9,0 x 2,0 x 2,2 m Condition: In good condition, checked and partially overhauled by a specialist. The existing milling head was replaced by an overhauled universal milling head. Furnishing: Differential for inclined machining Automatic indexing device (indexing discs changeable!) For multi-wedge, multi-thread parts, then extensive bushings, support rollers and around 70 Change gears. Conversion of the milling head speed to a frequency converter with corresponding powerful motor is a great thing and saves a lot of set-up time. Equipment: Around 70 change gears, 3 bushing sticks of different sizes, around 20 Bushings, 2 roller mountings, 2 tips for direct mounting on the Clamping spindle, 350 mm chuck, 2 spare part disks. Bodswgizdjpfx Abbjwl

Condition: used, Year of construction: 2022, functionality: fully functional, overall weight: 220 kg, total length: 610 mm, total height: 2,000 mm, total width: 805 mm, input voltage: 400 V, control cabinet height: 2,000 mm, control cabinet length: 610 mm, control cabinet width: 805 mm, input frequency: 50 Hz, control voltage: 230 V, protection type (IP code): IP20, We are offering this used Eskap ESR-7000 (-S485) power factor correction system, 100 kvar, year of manufacture 2022. Ready-to-connect, regulated power factor correction system for the automatic compensation of reactive power, ESKAP modular design in accordance with IEC / DIN EN 61439-1 and -2, IEC / DIN EN 60831-1 and -2 and DIN EN 61921. Rated voltage: 230 / 400 Volts, 50 Hz Rated power: 100 kvar, step power: 25 kvar Configuration: 2 x 25 – 50 kvar, expandable in the same cabinet up to max. 200 kvar Modules spaced approx. 100 mm apart Contactors with pre-charging resistors for damping inrush current peaks Group protection with NH fuse-switch disconnectors MKP three-phase capacitors with discharge resistors, UN = 525 Volt 7% detuned to protect against ripple control frequencies > 228 Hz Reactors with high linearity, temperature monitoring Temperature class T40/B, insulation class F 12-step four-quadrant controller with self-adaptation Ventilation via ball-bearing roof fans Bwedpfjyiryyjx Abbjl Permissible ambient temperature: -10°C to +35°C (24h average), +40°C (short-term max) ESKAP floor-standing cabinet, dimensions 2000 x 805 x 610 mm (H x W x D) Protection class 1, IP20, color: RAL 7035 Cable entry from below, door hinge right, weight approx. 220 kg If you have any questions or need further information, please feel free to send us a message or call us.

Condition: used, machine/vehicle number: LC555, Used aseptic filling line Tetra Pak A3 FLEX 1000SQ 7000 l/h General description of the line The Used aseptic filling line Tetra Pak A3 FLEX 1000SQ 7000 l/h provides an industrial configuration specifically designed for the sterile filling of liquid food products. It particularly suits sensitive items such as UHT milk and fruit juices, which require controlled processing environments. Moreover, the system operates with 1-liter square containers and reaches a production capacity of 7,000 liters per hour. As a result, it ensures high microbiological quality standards. In this configuration, each machine plays a critical role in maintaining aseptic conditions from filling to final packaging. Bwjdpfxswkux Ns Abbol Aseptic filler Tetra Pak A3 FLEX At the heart of the Used aseptic filling line Tetra Pak A3 FLEX 1000SQ 7000 l/h, the Tetra Pak A3 FLEX filler (version 100V), manufactured in 2004, performs aseptic filling using an integrated sterilization system, microbial barrier, and precise dosing mechanisms. Consequently, it processes pasteurized or sterilized products intended for extended shelf life and keeps them intact without requiring refrigeration. Furthermore, the filler maintains a sterile environment throughout the entire cycle. In addition, it ensures consistent product dosing and eliminates variability in filling performance. As a result, manufacturers can rely on this equipment to meet strict food safety requirements. Aseptic capper Tetra Pak TCA88 The line also includes the Tetra Pak TCA88 capper, built in 2006. This module applies plastic caps to filled containers using induction or mechanical systems that ensure hermetic sealing in an aseptic environment. Moreover, the capper synchronizes precisely with the filler to ensure uninterrupted operation. In contrast to conventional systems, this integration significantly reduces the risk of contamination after filling. In the same way, the TCA88 includes built-in quality control functions that verify each cap’s position and torque. Meanwhile, Tetra Pak designed the unit with safety features such as interlocked guards and error monitoring systems, ensuring full compliance with industry standards. Cardboard packer TCBP70 in this used aseptic filling line Tetra Pak The Tetra Pak TCBP70 packer, manufactured in 2007, manages secondary packaging. This automatic system forms and fills corrugated cartons using wrap-around or preformed box configurations. Similarly, it operates with fully electronic controls that allow real-time adjustment and monitoring. Therefore, the machine supports flexible packaging layouts and rapid format changes. In addition, the TCBP70 includes safety systems such as light curtains and emergency stop devices. For example, if an operator enters the guarded zone, the system halts automatically to prevent accidents. As a result, the packaging process remains both efficient and secure. Industrial applications and operational benefits The Used aseptic filling line Tetra Pak A3 FLEX 1000SQ 7000 l/h targets producers in the dairy and beverage industries who require aseptic packaging capabilities. For instance, companies manufacturing milk, plant-based drinks, or fruit juices can benefit from the line’s ability to maintain sterility without cold chain logistics. In fact, the full integration of Tetra Pak modules allows manufacturers to achieve high energy efficiency, complete batch traceability, and reduced d...

Condition: used, Lippert belt conveyor GF 6870-900-800 RA2106 Technical data: Conveyor length (NL): 6870 mm frame width (NB): 900 mm belt width (GuB): 800 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Bodpspdv N Eofx Abbowl Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics