Used processing- and subsequent machines for sale (71)

Year of construction: 1996, condition: used, functionality: fully functional, machine/vehicle number: 465, HAUL-OFF UNIT ME 30/4 - used machine, function-tested - Driven by 2 GS motors 0.8 kW each - Pull-off speed 0.5 to 10 m/min - Pull-off force max. 4,500 N - Caterpillar clamping pneumatic, weight compensation of the upper crawler carrier, Equalising tank for the compressed air supply Credpfxetx Axro Aifjf - 2 transport chains 75 mm wide, 23 mm high, hardness approx. 70 Shore A profiled for roller shutter standard profile (smooth segments possible) - Protective panelling, limit switch protected - Control panel with approx. 12 m connection cable - Fixed extrusion height 1100 mm Central chain lubrication

Year of construction: 1998, operating hours: 1,776 h, condition: used, functionality: fully functional, machine/vehicle number: 37, IDE--o/c 182836 - DC-drive 8,5 kW / screw Speed max. 50 rpm - 1-part cylinder, smooth Crjdpfx Ajzmurreifef - 1x flange heating zone - 2x die heating zones - die connection IDE M70x2

Condition: new, Year of construction: 2025, machine/vehicle number: 30765, BELT HAUL-OFF BASE.2 - new machine from IDE-stock programme - Extrusion height preset to 1,100 mm - External height adjustment with 4 threaded spindles - Base frame 2.0 m long, welded tubular frame - Driven by 2 AC motors 0.55 kW each (rated-power at 50Hz) * operation at 87Hz = 0,96 kW each - Pull-off speed 1.0 to 10 m/min - Pull-off force max. 5.360 N - Contact length approx. 1,000 mm - Pneumatic track clamping * Weight compensation of the upper caterpillar carrier * Adjustable stop for mechanical limitation mechanical limitation of the track clamping * Equalising tank for compressed air supply - 2 transport belts 200 mm wide Codewcaqhspfx Aiferf * Hardness approx. 40 Shore A - Protective panelling with sliding door, limit switch protected * with inlet and outlet protection channel, 500 mm long - Profile guide rollers on infeed side, adjustable - Analogue operation, integrated in the control cabinet

Condition: used, Year of construction: 1973, KRUPP FS-74 Cutting Machine - incl. dual brake unit (250kg) - incl. drive system - speed control Cjdpoytcw Refx Aifsrf - winding monitor The system is available twice. (price per unit) Please note that the machine must be dismantled, packed, and collected by the buyer.

Condition: used, Year of construction: 2004, Screen changer EREMA SW8/134 RTF Continuous partial area backwash filter with 4 carrier pistons (8 sieves) for heavily contaminated polymers Minimal pressure differences when backwashing or changing sieves The melt filter system meets the highest demands for fine filtration and is characterized by robustness, a high degree of automation and maximum availability, plus improved homogenization of the melt Main components: 1x continuous 4-piston backwash filter 1x control monitoring unit 1x operating unit for filter change Cjdpfxjualale Aifjrf 1x hydraulic unit System features: - Sieve diameter Ø 134mm - Active sieve area 1128cm² - fully automatic rinsing processes without interrupting production - Technical documents - Year of manufacture 2004 Subject to prior sale Please only send inquiries by email Note: The machine is still installed and can be inspected on site. The buyer must dismantle it himself and organize the shipping. This is not part of the offer price.

Year of construction: 2013, condition: used, functionality: fully functional, Equipment: CE marking, "Dual drying system with compressed air expansion + molecular sieve treatment Crsdpfx Aijzlxq Nsfsf - Weekly timer - Anti-stress system - Compressed air flow rate: 7 - 20 Nm3/h - Maximum temperature: 180 °C - Dew point: -50 °C - Total power: 1 kW - Power supply: 230 V - 50 Hz - Hopper capacity: 50 dm3 - Compressed air pressure: 6-8 bar - Weight: 23 kg"

Condition: good (used), Year of construction: 2000, Sica Starbell Crsdpfxjwmrgve Aifef

Condition: good (used), 10 Meter vacuum tank Leba 225 diameter Csdpjwmrhaofx Aiforf

Condition: excellent (used), Manufacturer: MORETTO S.P.A. -type: Hopper Loader; Serial.: 1302868; Model: F3F40 -electrical data: 230V; 50/60Hz; 1kW -capacity: 50dm3/h Cjdpfx Aist H Ndpsferf -weight: 11 kg

Year of construction: 2015, condition: like new (used), Piovan granulate tank, + inverter+ PLC Cedpfx Aisgh Tkpofsrf With safety top door. Tank diameter 650 mm Tank height: 800 mm Overall size: 650x800x1300 mm

Year of construction: 2011, condition: used, functionality: fully functional, Blackman & White Genesis 2300 Conveyor (DOM June 2011) Overall Size – 7.6m (including cradle) X 3.1m Belt size - 5m x 2m Cutting Window – 4.6m X 1.3m Max Cutting Speed – 1500mm/sec Pneumatic Oscillating Drag Knife with 1 spare tool head (Unsure on working state) Full Vacuum System (Single Zone) Leibinger JET3 Inkjet Marking System (NON WORKING) MasterCut 2100 CL Drive Software Included Alphacam 2012 Processable Materials Codpfezdkv Iox Aifjrf Composite Pre-Preg Materials (Carbon Fibre , Glass Fibre, Kevlar) Textile Fabrics Low Density Foam

Year of construction: 2016, condition: like new (used), functionality: fully functional, machine/vehicle number: 1109675-001, Robatech Concept Diamond 5/2 Hot Melt Melting Unit Manufacturer: Robatech Model: Concept Diamond 5/2 Article Number: 164001 Serial Number: 1109675-001 Year of Manufacture: 2016 For sale is a Robatech Concept Diamond 5/2 hot melt melting unit, used in an industrial setting. The unit was used in 2019 in a coating system for the production of stair treads. In the same year, the system was upgraded to a larger Robatech Concept Diamond 8 system because a higher melting capacity and conveying performance were required for production. Therefore, the machine offered here was not replaced due to a defect, but solely due to the increased production requirements. Since then, the unit has been kept as a backup machine. Equipment according to Robatech configuration: * 5 kg tank * Gear pump ZPC 5 * 2 sockets with a total of 4 heating zones * Level sensor ILS * External USB interface * Quantity control * Analog input 0–10 V or 4–20 mA * Pneumatic pressure control with pressure gauge for 1 pump * Filter cartridge sintered bronze 130 µm Cedpfx Aozfx A Eeiforf * Connection: 400/230 V AC, 3LNPE, 50–60 Hz, 25 A Technical data: * Type: Hot melt melting unit / Adhesive Melter * Tank size: 5 kg * Pump type: ZPC/GRC * Number of pumps: 1 * Year of manufacture: 2016 * Serial number: 1109675-001 The unit is in good used condition. Inspection is possible by prior appointment. Errors and prior sale excepted.

Year of construction: 2025, operating hours: 255 h, condition: like new (used), functionality: fully functional, We are offering for sale a large-format, 5-axis CNC waterjet cutting machine, PTV WJ4080. The machine was manufactured in 2025, has only approximately 255 operating hours, and is in new condition (like new/demonstration machine). Regular service and maintenance have been performed exclusively by authorized technicians from the manufacturer, PTV. Cjdpfx Aijzg Dgxsforf The machine is equipped with superior optional features for maximum precision (5-axis cutting head with bevel compensation) and gentle cutting of brittle materials. The machine is connected and ready for a demonstration. Technical specifications: • Manufacturer: PTV s.r.o. (Czech Republic) • Model: WJ4080-1Z-UJ-PJ-5AX (60°) • Year of manufacture: 2025 • Serial number: 70-1457 • Machine condition: Like new (as new, minimally used) • Operating hours: approx. 255 hours • Working dimensions: 4,000 x 8,000 mm x +-180 mm • Enclosure protection class: IP54 • Electrical parameters and connection: • Voltage system: TN-C-S, 3+N+PE-400/230 V AC • Network frequency: 50 Hz • Infeed fuse: 25 A • Installed power: 5.5 kW • Power factor COS φ: 0.85 • Control circuit voltage: 24 V DC • Maximum short-circuit current of busbars: 10 kA Key features and technologies: • 5-axis cutting head (60°) with Progress Jet function: A system for active bevel elimination, which ensures a perfectly perpendicular cut and maximum dimensional accuracy, even at high speeds. • Gentle Piercing function: Controlled piercing with a smooth increase in cutting pressure. Ideal for brittle materials (glass, tiles, ceramics, stone, composites), where it completely prevents cracking or delamination of the material. • PTV JETS 3.8/60 Classic high-pressure pump: - Equipped with a frequency converter (dampens shocks, saves electrical energy, and extends the life of high-pressure components). - Integrated auxiliary pump for compensating low pressure in the supply water. • ARSA automatic sludge removal: Continuous mechanical cleaning of the tank/collector from used abrasive + integrated vacuum tube for easy manual cleaning. • Abrasive handling system: Pressurized abrasive feed unit PDA 1500. Bonus to the offer: We will provide 4 tons of high-quality abrasive free of charge with the machine, which allows the new owner to immediately start production without additional initial investment. The machine is fully functional, connected, and can be viewed and tested by prior arrangement. If you have any questions, need further information, or are interested in viewing the machine, please do not hesitate to send us a message or contact us by phone. We will get back to you promptly.

Year of construction: 2009, condition: used, functionality: fully functional, machine/vehicle number: T004886, Hydraulic screen changer: Complete hydraulic power unit. Dual plate (double) system. Four screens, 300 mm diameter. Controls on both sides of the screen changer. Melt pressure sensor. Crsdpfx Aiewqrprefsf

Condition: used, Ultrasonic welding machine, see images. Codpfxszcvuhj Aiferf

Year of construction: 2006, condition: excellent (used), Capacity over bed Ø 400 mm, travel X/Y/Z 170/50/505 mm, tools Q-axis 360°, 2 + 1 tools, spindle 7 KW, 10 – 4000 rpm, bore Ø 42 mm, control SIEMENS 840D, chip cylinder vacuum cleaner, minimum lubrication system, pneumatic hollow fixing device, 2-jaws and 3-jaws chuck Ø 160 mm, manuals, etc Crodpfxjimbl Uj Aifof

Condition: excellent (used), Year of construction: 2003, This Haul-off saw from our renowned brand SICA S.p.a. is in machine storage at Plastima Used Machinery. The saw is from 2003 and is in used but good condition. Brand: SICA S.p.A. Model: TRS/U 110-800 Year of construction: 2003 Cedpfotphp Isx Aifsrf Power: 5.5 kW Pipe outer diameter max: 110 up to 800 mm

Condition: good (used), Transitube mixing system for mixing laser sintering material, including conveying via screw conveyor. Cjdpfxoyzamgo Aiforf

Year of construction: 2000, operating hours: 0 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 991666/A, Complete Turbomixing plant composed of: Bandera turbomixer 700L volume of the tank, DC motor 130kw Credpfxsy Txzms Aifof Cooler mixer 2000L , electric control Panel with PLC to control the mixing cycle Available original manual Bandera

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: LCS300-4T, CNC machine Elcede, type LCS300-4T, year of manufacture 12/2001, 400/50 Hz, working area 305 x 152.5 cm, machine dimensions 545 x 280 x 233 cm (height), control cabinet 80 x 64.5 x 190 cm (height), PC cabinet 84 x 75 x 198 cm (height), 3x Dietz fans, + cooling unit KKT-krans KLB-S26T-RS, year of manufacture 2001, 400V, 144 x 90.5 x 161 cm (height), 50,640 operating hours, desk with Fukitsu desktop, password Defi123+, desk 170 x 75 x 78 cm (height), in operation. Codpfey D Hwwex Aiferf

Condition: used, Year of construction: 2010, functionality: fully functional, Machine data • Gantry-type machine with stationary table and moving bridge for minimal footprint • Base, bridge, and bridge columns made of steel, welded in one piece, stress-relieved and machined • Main structural components consist of ribbed welded assemblies, optimized for the best possible rigidity-to-weight ratio, vibration damping, and high acceleration • Every machine design is verified and optimized using finite element analysis (FEA) to ensure maximum quality, performance, and safety • Easily accessible machine table enables simple loading and unloading with a forklift or overhead crane • Precision ground linear guides with high preload and additional cover strip on all axes for optimal chip protection • Brushless digital A/C servo motors and controllers on all axes • Single-sided (centered) drive on the X-axis (gantry drive) • Rack and pinion drive on X and Y axes • Precision ball screw spindle with double bearing support on Z-axis • Precision planetary gearboxes with minimal backlash • Fully enclosed cable drag chains to protect cables from chips and dust Crsdjybb N Ispfx Aifsf • High-quality shielded cable drag chain wiring for maximum reliability against interference and downtime • X-axis machining area: 1,540 mm • Y-axis machining area: 1,540 mm • Z-axis clearance: 150 mm • Z-axis travel: 240 mm • Network connection via Ethernet • Remote maintenance via Internet FlexiCAM control system • DIN-ISO 66025 G-code compatible • Includes TCP/IP network interface • 256 MB RAM • Simple operation via handheld control unit with display Spindle with manual tool change • Power consumption: 5.6 kW • 5,000 to 24,000 RPM, infinitely programmable • Cooling via integrated electric blower Dust extraction for manual tool change • Hose connection diameter: 120 mm Work table • T-slot profiles Safety features • CE compliant according to DIN EN 13849 • Includes EMC filter, Emergency Stop • Light curtain system controlled by the machine controller

Year of construction: 2017, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 6,000 rpm, table load: 15,000 kg, Fully operational condition + regularly serviced by the machine manufacturer The machine was built in 1998. In 2017, the control system was completely renewed for approximately €40,000! TECHNICAL DETAILS X-axis: approx. 5,000 mm Y-axis: approx. 2,500 mm Z-axis: approx. 1,250 mm Control unit: Fidia CXR with handwheel – new from 2017 Clamping table dimensions: approx. 5,600 x 2,740 x 520 mm (cast iron) Table load capacity: max. 15,000 kg T-slots and spacing: 10 x 22H8 / 255 mm Spindle Spindle type: hollow milling spindle with 78/8 flange and locknut Milling spindle power: 8 kW Spindle speed: 6,000 rpm Tool holder: ER40 collet chuck Tool release: manual Note: For approx. €10,000, a spindle upgrade kit can be retrofitted (cables & adapter plate included): Spindle speed: 24,000 rpm Tool holder: HSK63F Power: 10 kW Torque: 8.7 (S1) and 10.5 (S6) Codpfxjw N Nnbo Aifjrf A new 6-position tool changer can also be purchased in combination with the spindle upgrade (approx. €4,000). MACHINE DETAILS Connected load: approx. 28 kW Main fuse: 63 A Installation space required: approx. 8,000 x 5,000 x 4,500 mm Total weight: 25,000 kg

Condition: new, Year of construction: 2026, rotational speed (max.): 36,000 rpm, Perfect for: Highly efficient 3D milling of small workpieces – precise machining with high output Materials: Plastics, composites such as CFRP/GFRP, model-making materials, aluminum Industries: Automotive, aerospace, transport & logistics, leisure industry, sanitary engineering, boatbuilding, automation Crodpfx Ajx S E Nbsifef _____ Reference number: 1221 Availability: April 2026 Model: 5-axis CNC milling machine G-S-F/B (25-10) Spindle data: 8 kW / 6.4 Nm; 1,000-36,000 rpm; HSK E 40 Rapid traverse X/Y/Z: 80/80/60 Workpiece dimensions X/Y/Z: 2,500 x 1,000 x 600 Control: FANUC Tool changer: 13 tools Tables: 1 rotary table Vacuum system: yes Tool breakage and length control: Renishaw TS 27 R Miscellaneous: on request Year of manufacture: 2026 Condition: new

Condition: new, Year of construction: 2026, rotational speed (max.): 36,000 rpm, Perfect for: Highly efficient 3D milling of small workpieces – precise milling with high output Materials: Plastics, composite materials such as CFRP / GFRP, model-building materials, aluminum Industries: Automotive, aerospace, transport & logistics, leisure industry, sanitary, boatbuilding, automation Reference number: 1221 Availability: April 2026 Model: 5-axis CNC milling machine G-S-F/B (25-13) Spindle data: 8 kW / 6.4 Nm; 1,000–36,000 rpm; HSK E 40 Rapid traverse X/Y/Z: 80/80/60 Workpiece dimensions X/Y/Z: 2,500 x 1,300 x 600 Control: SIEMENS – Sinumerik One with HT 2 handheld terminal Crodox Uw Stepfx Aifof Tool changer: 13 tools Tables: 1 rotary table Vacuum system: yes Tool breakage and length detection: Renishaw TS 27 R Other: upon request Year of manufacture: 2026 Condition: new

Condition: good (used), Year of construction: 2014, functionality: fully functional, ELCON Automatic Multiwall Sheet Cutting Machine LANCET 215 For vertical and horizontal cutting of multiwall sheets with a rigid blade! Crjdpeyymhuefx Aifef Technical Specifications: Cutting Height: 2,150 mm Cutting Length: 7,300 mm Cutting Depth: 50 mm Required Air Pressure: 6 bar Dimension setting for horizontal cuts: electronically adjustable via touchscreen Dimension setting for vertical cuts: via scale from 0–1,300 mm Feed rate: continuously adjustable from 0 to 60 m/min. Features: Solid, enclosed rear wall with felt support (new) Aluminum material support table Right-hand, pneumatically retractable material stop Pressure device for vertical cuts with adjustable pressure Lower pneumatic sheet clamping device per meter of cutting length Pneumatically retractable blade Pneumatically swiveling blade