Used other wood planers for sale (27)

Year of construction: 2021, condition: used, Planing width: 410mm, working height: 3mm-240mm, max. stock removal: 5mm, feed speed: 12m/min, thicknessing table X/Y: 775mm/423mm, extraction port diameter: 120mm, operating hours: approx. 350h, weight: approx. 361kg. Equipped with 4-knife TERSA cutterblock for quick knife changes without adjustment or screws, solid gray cast iron thicknessing table with 4-column guide on four large spindles, integrated lifting device for a stable table position without additional locking, manual thicknessing table adjustment with numerical readout and reading accuracy of 1/10mm, helical-toothed steel infeed roller for gentle stock removal from 0.2mm and satin-finished steel outfeed roller. The machine is currently in storage. Kodpfszzdyuox Agrjnb

Condition: excellent (used), Year of construction: 1997, machine/vehicle number: 180.1001, functionality: fully functional, input voltage: 380 V, input current: 32 A, input frequency: 50 Hz, We are offering this very well-maintained Hoffmann + Kuhnheinrich 180 four-sided planer, year of manufacture 1997. Manufacturer: Hoffmann + Kuhnheinrich GmbH Machine type: 180 Year of manufacture: 1997 Machine no.: 180.1001 Voltage: 380 V Rated current: 32 A Frequency: 50 Hz Kjdpjy D Nc Nofx Agronb If you have any questions or require more information, please feel free to send us a message or give us a call.

Year of construction: 1996, condition: used, Offered is a combined Weinig/Alfred Harbs planing and profiling line for woodworking. 1) Weinig Unimat 23 E planer/moulder, year of manufacture: 1996, operating voltage: 3x380V/50Hz, control voltage: 230V/50Hz and 24V DC, rated current: 78A, main fuse: 80A, power: 34kW. 2) Weinig Uniplan fine finish/hydro planer, year of manufacture: 1996, operating voltage: 3x380V/50Hz, control voltage: 230V/50Hz and 24V DC, rated current: 42A, main fuse: 50A, power: 17kW. 3) Weinig UC 10, year of manufacture: 1996. 4) Alfred Harbs K6V, year of manufacture: 1992. Including additional associated components and transport equipment. An on-site inspection is possible. Knjdsz Da R Sjpfx Agrsb

Year of construction: 2017, operating hours: 200 h, condition: used, functionality: fully functional, We are offering this used Marunaka SUPER MECA-S super surfacer / planing machine, year of manufacture 2017. Serial number: 1074 Knsdpoy Hdp Njfx Agrob Manufacture date: 02.11.2017 Rated voltage: 380 V Phases: 3 Network frequency: 50 Hz Total power: 2.3 kW Main motor power (continuous): 2.2 kW Main motor speed at 50 Hz: 1,410 rpm Feed speed: 53 m/min Maximum working width: 250 mm Maximum working height: 300 mm Net weight: 430 kg The machine comes with the following optional features: - Increased pass-through height to 300 mm - Pressure roller for wide workpieces - Lateral infeed and outfeed tables - Includes 10 blades at EUR 50 each The machine has seen very little use and is in excellent condition. If you have any questions or need further information, please feel free to send us a message or give us a call.

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, Due to equipment replacement, a Changa Iron Cm-767C four-sided moulder, year 2010, is for sale. In working condition. 6 spindles. Working width 18–230 mm, height up to 150 mm. Knodpfx Aoy N Eb Ssgrsb Feed speed up to 36 m/min. Suitable for planing and profiling timber materials. Located in Kandava, inspection possible. Available immediately.

Condition: excellent (used), Heads: -lower -right -left -right -left Spindle diameter: 50 mm 5 rollers in the table Transport dimensions: Width: 2.4 m Height: 1.8 m Length: 5 m Without a feeder. Kedpfx Aozba E Ujgrenb

Condition: used, Stress line and finger joint line capable of producing lengths up to 13 m, which is the maximum length the planer line can handle. Ksdpfxozaazgo Agronb This can be sold in two different packages: either the stress line and finger joint line together, or the planer line separately. For more information, please contact us.

Condition: excellent (used), Four-sided planer Weinig Profimat 22 N, 6 heads – the last one is universal. Tools included. Work video of the machine available. Very good condition. Ready for operation. Ksdpfx Aexyxaasgrenb

Condition: excellent (used), Deburring machine, Ksdpfxoy Andcj Agronb 1 upper head, 3 kW motor 2 lower head, 3 kW motor 3 right head, 3 kW motor 4 left head, 3 kW motor 5 universal head, 0.37 kW motor 6 feed mechanism, 1.5 kW motor, 18 m/min Working height: 11 cm Working width: 14 cm

Year of construction: 2023, operating hours: 10 h, condition: new, functionality: fully functional, Here we offer a machine that was specially developed for fixing loose or cracked branches. Knsdpfxopiufws Agrsb The branches are automatically recognized as they pass through and fixed with hot melt adhesive. This significantly reduces waste due to branch branches. With opaque painted surfaces, the branch becomes almost invisible. Net Automation sets the standard with the AELA XKI new technological standards in the Diagnosis and correction of wood characteristics. • greatly reduced throughput times • immediate further processing possible • Visual enhancement • Easiest operation DIAGNOSIS AND CORRECTION • Rotten branches • torn branches • Resin galls • Wing branches etc. ..... ..... ADVANTAGES • no tear-outs when planing • Detection of dirt and slatted marks • Diagnosis with artificial intelligence (AI) • automated vaccination process The system can be viewed and tested by arrangement in 77866 Rheinau.

Condition: excellent (used), 4 knives Table length: 300 cm Table width: 63 cm Knedeyk D H Ispfx Agrjb Motor power: 5 kW

Year of construction: 2009, condition: ready for operation (used), SCM surface planer offered. Working width: 520mm, cutter block diameter: 120mm, knife dimensions X/Y/Z: 520mm/35mm/3mm, max. speed: 5000rpm, max. depth of cut: 8mm, total jointer table length: 2750mm, infeed table length: approx. 1550mm, dust extraction port diameter: 120mm, machine dimensions X/Y/Z: approx. 2750mm/1415mm/1200mm, weight: 875kg. Inspection by appointment possible. Kjdezl Enuspfx Agrsnb

Year of construction: 2003, condition: used, Technical data: - Manufacturer: Weinig - Type: Unimat Super 4 - Year of manufacture: 2003 - Working width: 25 - 150 mm - Working height: 15 - 50 mm- Shaft arrangement: Spindle 1 below: Planing and milling the guide groove 125x40x40 mm, Z=2 125x120x40 mm, Z=2 Spindle 2 above: Combination tool consisting of special planing head with guide groove and 2 flat milling cutters. Precise thickness planing and flat milling of the gluing surfaces on the right and left. Face milling cutter on the right: 240x17x40mm, Z=8 Special planing head: 125x240x40mm, Z=4 Face milling cutter on the left: 240x80x122mm, Z=8 Tool flight circles 125 and 250mm Spindle 3 below: Removing the guide groove and finish planing. 125x170x40mm, Z=4 - Spindle 1: 11 KW Kjdpfxsyatffe Agrsnb - Spindle 2: 18.5 KW - Spindle 3: 5.5 KW - Feed engine: 2.2 KW - Feedspeed: 5-20 m/min. - Speed spindle 1 and 3: 6.000 rpm. - Speed spindle 2: 7.000 rpm. - Transport rollers D (hardened): 140 mm - Length of infeed table: 2.000 mm - Hardened machine tables - Guide groove in machine table - Suction nozzles 2x140 mm, 1x160 mm - Volume flow: approx. 5,500 m³/h - Volts/Hz: 400/50 - Location: Blomberg warehouse from 01/2026

Year of construction: 1999, condition: ready for operation (used), A double planer Cremona including a log turner and an optional milling head is available. Working width: 900mm. An on-site inspection is possible. Kjdpfx Agjw I E D Norsnb

Year of construction: 1987, condition: ready for operation (used), A Weinig four-sided planer including automation, double cross-cut saw, infeed and extraction system is available. 1) Four-sided planer Weinig Hydromat 22 BL with automatic lubrication, year of manufacture: 1987, working width: 220mm, working height: 140mm, number of heads: 7, head arrangement: bottom/right/left/right/top/bottom/bottom, spindle diameter: 50mm. 2) Kellfass automation unit consisting of double cross-cut saw, length: 5000mm, buffer cross conveyor and pneumatic roller infeed. On-site inspection is possible. Kjdpjv T Apcofx Agrenb

Year of construction: 1999, condition: ready for operation (used), Working width: 230mm, working height: 160mm, number of spindles: 5, spindle diameter: 50mm, spindle power: 4x 5.5kW/2x 11kW, feed rate: 24m/min, input table length: 3000mm, vertical spindle axial stroke: 80mm, horizontal spindle axial stroke: 45mm. Connected load: 126kW, air requirement: 8400-9600m³/h, machine dimensions X/Y/Z: approx. 3500mm/2000mm/1800mm, weight: approx. 3500kg. Including Weinig EM-11 slide-in unit and suitable distributor for the extraction system. Documentation available. On-site inspection is possible. Knodou Damdepfx Agrob

Condition: used, Year of construction: 1993, machine/vehicle number: 315 AE 0643 V 02 85, ACMA DM82 – Single-Blade Rip Saw (Délingeuse monolame) Knodpsyrnxksfx Agrjb The ACMA DM82 is a robust French single-blade rip saw for professional longitudinal splitting of boards and strips in sawmills and woodworking shops. Featuring hydraulic feed and INRS safety approval (Visa No. 315 AE 0643 V 02 85) from 1993, it is ideal for precise wood cutting up to 160 mm height. Cutting length: 4000–5200 mm Cutting height: 140–160 mm Cutting width: 370–600 mm Saw blade Ø max.: 600 mm (min. 450 mm) Saw motor power: 9–13.2 kW (12–18 HP), 380 V 3~ RPM: 3000 rpm Hydraulic motor: 2.2 kW Table height approx.: 820 mm Dimensions (L×W×H): 4800–6600 × 1500–2300 × 800–1500 mm Weight: approx. 1350 kg

Year of construction: 2025, condition: new, Dimensions (L/W/H) 2650x950x1850 mm Kedpfx Aevz Ewrsgronb Weight 2100 kg Total power requirement 15 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 3500x1500x1650 mm Knedevz Em Hepfx Agrsb Weight 2200 kg Total power requirement 40,3 kw

Year of construction: 2026, condition: new, planing width 405 mm Knjdsyk Ibpepfx Agreb total power requirement 15 kW Weight 1900 kg

Year of construction: 2026, condition: new, planing width 610 mm total power requirement 19,5 kW Weight 2500 kg Knedpjyk Ibcsfx Agrjb

Year of construction: 2025, condition: new, Dimensions (L/W/H) 0x0x0 mm Weight 3500 kg Kedpevz Ei Usfx Agrjnb Total power requirement 57,7 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 2200x1100x1720 mm Weight 2500 kg Kedpfjvz El Aox Agrjnb Total power requirement 19,5 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 2200x900x1700 mm Knodpfx Aevz Ezqsgreb Weight 1900 kg Total power requirement 15 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 3500x1500x1650 mm Knodpovz Evhjfx Agrjb Weight 2500 kg Total power requirement 45,8 kw