Used wide planing machinery for sale (24)

Condition: excellent (used), CATALOG NUMBER: 7503 TECHNICAL DATA: - max planing width 610mm - max planing height (two-sided) 200mm - max planing height (four-sided) 100mm Top: - 2 rubber feed rollers - 2 toothed feed rollers - metal feed roller - geared feed roller - pawls - pressure roller - 2 geared feed rollers - pressure roller - planing shaft 610mm, 4-knife, 7.5kW - pressure roller - smooth, metal feed roller - pressure roller - profiling shaft 7.5kW - pressure roller Cjlhjzr Ixcjccqkjhc - rubber feed roller Bottom: - planing shaft, axis 35mm, axis length 130mm, 2.2kW - 2 guide strips - feed table - smooth feed roller - planing shaft 610mm, 4-knife (2 knives installed), 7.5kW - 2 smooth feed rollers - split, metal slip roller - side pressure roller Rear: - side spindles + 2 pressure rollers - 1) vertical right 95mm, 4kW - 2) vertical left 95mm, 4kW - spindle diameter 35mm - spindles adjustable up/down, right/left - adjustable rollers in the lower table - electric thickness setting - 6 feed speeds 7/9/11.5/14/18/23 m/min - feed motor 3.1kW - dust extraction port diameters 3x120, 3x160mm - dimensions (L/W/H) 3150x1900x1600mm - weight approx. 3500kg ADVANTAGES: – best wide-belt planer for wet and dry wood – ideal for processing timber, flooring, etc. – additional profiling shaft and planing shaft (undercutter) – 4 horizontal planing shafts + 2 vertical spindles – manufactured by the German brand KUPFERMUHLE – used planer, very good condition Net price: 66900 PLN Net price: 15558 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to fluctuations)

Condition: ready for operation (used), KUPFERMÜHLE – 2-sided Planer K43 Working width max. 420 mm Planing height, 2-sided max. 300 mm Feed rate 15 - 90 m/min Chip removal, lower cutterhead 15 mm Chip removal, upper cutterhead 20 mm Cholhccqezmmrdjksc Drive motor, lower shaft 15.0 kW Drive motor, upper shaft 22.0 kW Drive motor, scoring saw, top 7.5 kW Feed motor 7.5 kW Height adjustment 3.0 kW Total electrical power 55 kW Planer heads, aluminum, each with 8 knives D 200 mm 2 pcs Jointing device, bottom and top Overall length 2960 mm Overall width 1630 mm Table height, constant 800 mm Net weight 5300 kg Year of manufacture 1983 Last maintenance by the manufacturer 2024 Condition good This planer was originally purchased new in 1984 as a 4-sided machine. However, the vertical milling units have been removed and are no longer present. OPTION: Machine with 2 vertical milling units available at an additional cost. Machine is located in a soundproof cabin. L 3.8 x W 2.4 x H 2.6 m

Condition: like new (used), Year of construction: 2026, functionality: fully functional, Double side planer (Double Surface Planer ) extra wide 610 mm Maximum working width 610 mm Maximum working height 200 mm Heavy cardan feed system Special spike feedsystem Unlike the conventional chain drive systems, this machine employs a patented synchronized transmission system along the four fitting columns. Cholozy Np Eshccqkoc Electronic height adjustment Spiral cutterheads top and bottom Latest generation IE-3 motors Spindle and feed brakes CE

Condition: ready for operation (used), KUPFERMÜHLE DOMA-g-1620-V44 Four-sided planer with constant table height for varying wood thicknesses Working width max. 1620 mm Planing height, 2 sides max. 300 mm Planing height, 4 sides max. 240 mm (OPTION: can be converted to 300 mm) Feed rate in 6 stages 4.5 - 26 m/min Total electrical power 91 kW 4 horizontal planing shafts bottom right 11.0 kW bottom left 15.0 kW top right 18.5 kW top left 18.5 kW 2 vertical milling units x 7.5 kW with mounted aluminum planing heads H 240 mm Machine mounted on a rotary bearing Wood widths up to 820 mm can be planed with energy efficiency Chjlhccjzlbz Reqksc with 1 motor at the bottom + 1 motor at the top good technical condition of the machine with functional guarantee year 1981 last inspection by the manufacturer in 2025

Condition: used, Planer machine available in 2-sided or 4-sided versions REX HOMS 2050 Working width max. 2050 mm Working height max. 310 mm including swivel ring Chjlhccqjyid Uyoksc Constant table height with varying wood thicknesses The 8 images showing a REX HOMS 2050 in light blue were refurbished and delivered by joema several years ago and serve as an example.

Condition: ready for operation (used), functionality: fully functional, Kupfermühle KH30 Four-sided planing machine with additional unit: horizontal work spindle and extraction unit 4-sided universal planing machine KUPFERMÜHLE Electrical system: 400 volts / 50 Hz / 58.5 kW Paint finish: original Reseda green RAL 6011 Motor power and arrangement (kW): bottom 7.5 / top 11.0 / vertical right 7.5 / vertical left 11.0 5th spindle, bottom: 11.0 / Feed: 7.5 / Power: 3.0 Feed speed min/max: 5 – 30 m/min Work spindles: 5 pieces Discharge/extraction port: bottom 200 / top 200 / right 160 / left 160 mm / bottom 140 mm Working width min/max: 30 mm / 310 mm Working height min/max, 2-sided: 15 mm / 300 mm Working height min/max, 4-sided: 15 mm / 180 mm (OPTION 250 or 300 mm) Key features: Constant table height Guide rail on the RIGHT Planer heads for quick change Jointing device at the bottom and top Table plates slotted for sound insulation and are replaceable Extraction unit with 2 driven rollers at the top and double-sided guided upper part Height adjustment synchronized with the base machine Machine in repaired and tested condition with functional guarantee Additional options: New paint finish Repainting Overhaul Colhccsx Ehfcjqkshc etc.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, REX BIGMASTER Planer A+D+FR+FL+AFV+NSH+HFRo+HFRu 6 spindles + 2 chamfering units. Spindle arrangement: U-O-L-R-O-U Feed rate controlled by frequency inverter up to 80 m/min. Planing width 310 mm. Planing height 205 / 300. Chslhccjzrtn Noqksc Positioning control. Electrical control cabinet with control unit and power supply. Control panel. Soundproof cabin. 2 sets of tools. Technical documentation.

Condition: ready for operation (used), functionality: fully functional, planing width: 600 mm, overall weight: 3,000 kg, Four-side planer Manufacturer: Kupfermühle Model: Vuin 605 Planing width: 600 mm Max. planing height: 200 mm Table height adjustable Feed rate adjustable in steps 2 outfeed rollers Operating voltage: 380 V Control voltage: 220 V Frequency: 50 Hz Total operating current: 60 amps Total control current: 6 amps Transport dimensions: Machine approx. 2000 x 1800 x 1800 mm + pallet with accessories 1200 x 800 x 500 mm Cholhccoy At D Uoqkoc Total weight approx. 3000 kg

Condition: used, functionality: unexamined, Planing machine with planing shaft at the top and bottom Double-sided planing machine Feed rate continuously adjustable up to 80 m/min Planing width max. 310 mm Planing height max. 310 mm Lower shaft 22 kW Upper shaft 30 kW Feed 7.7 kW Cjlhccsy Ryx Ujqkjhc Electrical connection 61 kW Jointing device at the bottom and top Machine mounted on 2 steel supports, which are approximately 1.5 m longer than the machine Year 1990 Condition: good

Condition: good (used), planing width: 510 mm, working width: 510 mm, working height: 200 mm, Thickness planer REX, table width 510mm, max. planing height 200mm, two cutterblocks. Celhccqoy Sxyaokjhc

Condition: used, Planing machine with planing shaft at the bottom and top Cholhccqsy Ry Ddekoc Double-sided planing machine Feed rate steplessly adjustable up to 110 m/min Planing width max. 310 mm Electrical power 95.75 kW Bottom: 37 kW Top: 45 kW Feed: 13 kW Jointing mechanism at the bottom and top Good condition

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Double side planer (Double Surface Planer ) extra wide 400 mm Maximum working width 400 mm Maximum working height 200 mm Heavy cardan feed system Cslhozlqvweccqkjhc Special spike feedsystem Unlike the conventional chain drive systems, this machine employs a patented synchronized transmission system along the four fitting columns. Electronic height adjustment Spiral cutterheads top and bottom Latest generation IE-3 motors Spindle and feed brakes CE

Condition: used, Year of construction: 2010, functionality: fully functional, overall weight: 10,000 kg, input voltage: 380 V, Equipment: cabin, Lamellar planing machine 310 x 200 mm + saw spindle Chelox Exbdjhccqkjc

Condition: good (used), table length 1,500 mm / width 760 mm, Motor 4.0kW (originally for REX HOMS 760) Chip removal of the pre-dressing knife shaft max. 10 mm Speed of the blade shaft VA D=140 mm, Z4: approx. 4200 rpm. suction connection D= 140 mm Condition functionally tested >>REX New price over 20,000 € Chelhccqoimz D Uokoc

Condition: used, Year of construction: 1998, functionality: fully functional, planing height: 250 mm, working width: 410 mm, overall weight: 5,500 kg, Planer REX TIMBERWORK 410x250 mm + 4x chamfers + saw spindle Year of manufacture: 1998 Location: France, Savoie Chjljwmm Alehccqkoc

Condition: used, transversal substructure for planing machine Move the planing machine in order to be able to use the planer knives over the entire knife length and the zero line is retained Chelhccqjimz Egskec REX Hobelmaschine Querverstellung REX planing machine transverse adjustment Réglage transversal de la raboteuse REX Length 2850 mm / width 2600 mm / height 250 mm + bracket 215 mm

Condition: as good as new (ex-display), feed length X-axis: 800 mm, planing width: 800 mm, Double-sided planer. In very good working condition. Chjljx Rrykohccqkjc

Condition: refurbished (used), pull-out unit Celhcconvf Tbeqkohc Roller width 180 mm 2 powered rollers below 2 without drive above

Condition: excellent (used), Year of construction: 2016, Steton 5-head four-sided planer. Steton 5-head four-sided planer. The machine after the review does not require a financial contribution. Technical data: - max width of the workpiece 23 cm - max height 13 cm spindle diameter 40mm - 1 - Horizontal bottom 23 cm - 2 - vertical right 13 cm - 3 - vertical left 13 cm - 4 - horizontal upper 23 cm - 5 - universal 360 degree soundproofing cabin - electric setting of planing thickness Chjlhcji Apuhecqksc - two types of feed speed

Condition: new, Year of construction: 2021, V-hold 4-sided, 5-spindle planer, model VH-M 521 - width from 25 to 230 mm - height from 8 to 160 mm 1st from the bottom - 7.5 kW 2nd from the right -7.5 kW 3rd from the left -7.5 kW 4. from the top -11 kW 5. from the bottom - 7.5 kW - 5.5 kW feed from 6 to 36 m / min Colohq Rp Hshccqkshc - revolutions 6500 / min - diameter of the spindles 40 mm - feed for short, opposite the right spindle - pressure in front of and behind the upper spindle. - manual table lubrication pump - machine weight 3100 kg In stock

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with XPLANE cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating Cholhccsqlck Nsqksc construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: Xplane solid steel cutterblock Cutterblock with 3 spiral rows of knives (33 cambered hard metal knives per row), delivery includes full set of knives and a Torx T20 T-wrench; shaft speed 6,000 rpm included; The emission sound pressure level LpA during processing is reduced by 10 dB(A) - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, table surface precision-planed - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at the infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with Tersa cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality Cjlhceqlckpecqkshc the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 1994, 4 side planer 8 8 HARBS heads long table going 3 meters. Machine weight 5500 kg cardan drive. Head arrangement, bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal. Upper horizontal. 5.5 kW and 7.5 kW motors. Planing width 230 mm. Planing height 160 mm. Celel Dw Nxehccqkohc

Year of construction: 1996, condition: used, Planing machine Rex Homs 310 With a slitting saw from below Planing rollers above and below Planing width 310 mm Celhochrgreccqkshc Without feed mechanism. The feed mechanism here was from the continuous press of the zinc coating system.