Used Planing & moulding machines for sale (578)

Year of construction: 1990, Condition: reconditioned (used), 4-sided planer unimat U23, 7 heads 4-sided Weinig 7-head planer, 7 universal arrangement: horizontal, lower vertical, right, left, vertical, right, vertical, upper horizontal, lower horizontal, and the last universal. The drive is realized by means of cardans. The drive is secured with Rotax clutches. Pressure of the element using pneumatics. Feed smoothly regulated by an inverter. Machine feed 0-42 m/min. 2.5 kW and 7.5 kW engines. Grinding table and a new one. Additionally, new wiring and new electrics. The machine has been completely renovated. Warranty . Dujlepqxnxein Uikot

Condition: reconditioned (used), Year of construction: 1984, Functionality: fully functional, WEINIG planer type Hydromat 30R Year of manufacture-1984 №2609/686 Technical characteristics of the machine: Planing width 300 mm Planing height 150 mm Dslisupurqon Uiksut Maximum feed speed 120 m/min, motor power 30 kW Spindle position: 1. Horizontal lower spindle- 15 kW + control + jointer 2. Vertical right spindle - 11 kW 3. Vertical left spindle - 15 kW 4. Horizontal upper spindle - 18.5 kW + control + jointer 5. Vertical right spindle-18.5 kW 6. Vertical left spindle - 18.5 kW 7. Horizontal upper spindle - 15 kW + control + jointer 8. Horizontal lower spindle-18.5 kW+control arm 9. Horizontal lower spindle - 11 kW + control + jointer - Spindle diameter 50 mm - Automatic table lubrication system - 9 drive rollers in table - Complete with tools and accessories -Knife head extractor included

Condition: excellent (used), Year of construction: 2006, operating hours: 4,794 h, Functionality: fully functional, machine/vehicle number: 106442, WEINIG FOUR-SIDED PLANER TYPE UNIMAT SUPER 4 YEAR OF MANUFACTURE 2006 NUMBER OF HOURS WORKED 4794 ADDITIONALLY WEINIG EM 15 FEEDER TYPE 715 9177247 Machine in very good condition TECHNICAL PARAMETERS: planing width 150 mm planing height 50 mm spindle diameter 40 mm equipped with tools 1) lower head 11 kW 6000 U/min 2) upper head 22 kW 7000 U/min 3) lower head 5.5 kW 6000 U/min feed motor 2.2 kW feed regulated on the inverter feed on cardan shafts two side rollers pneumatic five upper steel pulling rollers one rubber upper roller grooved table length of the preliminary table 1975 mm electric adjustment of the upper head electric adjustment of the roller height automatic central lubrication WEINIG EM 15 belt feeder guiding channel belt width 250 mm stepless feed, regulated by a frequency converter hydraulic unit 1.5 KW (2 HP) feed speed 10-50 m/min width of the feed rollers 20 mm Dujlevnr Epsin Uikot feeder length 4600 mm Machine connected in the production cycle

Condition: like new (used), Year of construction: 2010, planing height: 200 mm, Weinig Powermat 2000 XL four-sided planer: - German manufacture - DTR CE - automatically controlled - PowerLock heads - year of production 2010 - for wet wood TECHNICAL PARAMETERS: - planer width: 300 mm - planing height: 200 mm - PowerLock heads - control from the touch panel - electronically adjustable heads - pneumatically pressed heads 1 bottom head: 18.5 kW 2 right head: 15 kW 3 left head: 15 kW 4 top head 22 kW with side cutter: 1.5 kW 5 Overhead: 18.5 kW 6 Lower head: 20 kW Dolin Usun Natjikout - heads with automatic jointing system - spindles speed: 8000 rpm - inverter-controlled feed speed: 6 - 60 m/min - six steel drawing top rollers - three rubber trailing top rollers - top feed rollers with support - six rollers in the drawing table, of which 2 milled in front of the first head - automatic central lubrication - spigot diameter: 4 x 160 and 2 x 140 mm

Condition: new, Year of construction: 2023, Functionality: fully functional, machine/vehicle number: 10006565, Weinig Powermat 1500 Working width 30 - 310mm (with tool flight circle 93-125mm) Working height 100 - 200mm (with tool flight circle 93-125m) Duslinsrq Ebfs Uikot Number of spindles 6 Spindles bottom 2 Spindles right 1 Spindles left 1 Spindles top 2 Spindle arrangement u-r-l-o-o-u Spindle speed max 8,000 rpm Spindle diameter 40 mm Powerlock tool holder incl. chamfering unit Separate motor for each spindle Electronic feed incl. brake, infinitely variable 5-40 m/min. Durofer pointed tooth rollers Short infeed table 1.2 m long with 2 driven rollers above the table Hard-coated machine table surface Manual lubricant pump WEINIG Comfort Set Control system WEINIG MEMORY PLUS-SYSTEM CE mark Declaration of Conformity

Condition: good (used), Planing width 20-230mm Planing height 8-160mm Number of heads 6 Arrangement of heads Bottom Right Left Duslinsvbwzvj Uikst Right Top Bottom Drawing rollers in work table 4 Pneumatic pressures hydraulic feeder

Year of construction: 1988, Condition: like new (used), Location Kłodawa 66-415 Dolinodx Elms Uiksut Conditions of delivery OWN RECEIPT Cost of delivery Customer cover Start type to be agreed Description Comments Four-sided planer, banding machine, Gabbiani spichetting machine Max planing width: 160 mm Max planing height: 100 mm Min. Element length: 180 mm Spindle diameter: 30 mm Number of spindles: 6 Spindle order: down rights, left, Mountain, Mountain bottom Crawler feed: top, bottom Smooth infeed adjustment: 4 - 34 m / min It is possible to work feed at an angle of: 0 ° - 30 ° Feed on cardanach Manual spindle height adjustment Adjustable heads in all directions Automatic lubrication of the track All bearings replaced with Teflon Machine after a full review The machine is adapted to the production of parquet and slats Dust Extractors: 6 x 120 mm Power supply: 400 V Total power: 26.2 kW Dimension of the machine Length: 4060 mm Width: 1500 mm Height: 1200 mm important: planed tables in the whole machine and leveling, setting angles and

Condition: reconditioned (used), Year of construction: 1990, Maximum width of installation: 230 mm Maximum height of installation: 150 mm Number of spindles: 6 Speed and power: 1.lower 11 kW+contra 2.right 11 kW + jointer 3.left 11 kW + jointer 4.upper 18 kW + counterpoise 5.upper 15 kW +controller + jointer 6.lower 15 kW + control + jointer All heads included. Dujlisupuqton Uikot All electric motors with brakes. Feed speed 6-60 m/min, frequency converter. Electric motor at infeed: 11 kW 6 drive rollers in table Table lubrication, automatic waxilite pump. Video of scrolling mechanisms

Condition: new, Year of construction: 2020, New Gaujing planer Dujlined Ak Ihs Uiket This advertisement is purely informative. In order to receive a specific offer, please contact us. We are the only and exclusive supplier of machines in Germany and Poland.

Condition: excellent (used), Year of construction: 2014, Weinig Unimat Super 4 + EM15 four-sided planer Year of production: 2014 Technical condition: very good Technical data: - planing width: 150 mm - planing height: 50 mm - planing diameter: 40 mm - total power ( heads ) 36 kW - feed motor: 2.2 kW - length of infeed table: 1000 mm Delin Uietp N T Eokeut - electric height adjustment - EM 15 feeder with a length of 4700 mm - dimensions including feeder: 790 x 200 x 190 cm - weight 3200 kg

Condition: used, Position 1 = Planer Shaft Position 2= 1st right vertical shaft Position 3= 1st left vertical shaft Position 4= 1st upper horizontal shaft Position 5= 1st lower horizontal shaft Position 6= Strip recovery unit 2500 mm entry level Speed 6-36 m/min via inverter No. 1 - motor power 5,5 hp (4 kw) Horizontal presser before the planer with pneumatic exclusion from the panel Pneumatic exclusion from the control panel for the feed unit placed before the planer shaft Tandem feed group in front of the right vertical with rapid exclusion Feed groups after the upper ones for the reduction of the towing distance from 620 mm to 450 mm Infeed guide with bearings for automatic feeders Electrical predisposition for the use of automatic loaders Manual centralized lubrication Pump for lubrication of the work surface with automatic drive Preparation for integration in line with INTEGRA SYSTEM - work surface raised to 970 mm - traffic light at the entrance - piece counting Independent electrical panel POS. 1 High precision shaft Engine 10 hp (7.5 kW) instead of 5.5 hp (4 kW) Brake for motors from 5.5 hp (4 kw) to 10 hp (7.5 kw) T-SET tool quick clamping -allows the locking/unlocking of tools with the simple use of a compressed air gun POS. 2 High precision shaft Engine 10 hp (7.5 kW) instead of 5.5 hp (4 kW) Brake for motors from 5.5 hp (4 kw) to 10 hp (7.5 kw) Vertical shaft with useful length 180 mm T-SET tool quick clamping Electronic vertical positioning POS. 3 High precision shaft Engine 10 hp (7.5 kW) instead of 5.5 hp (4 kW) Brake for motors from 5.5 hp (4 kw) to 10 hp (7.5 kw) High precision shaft Vertical shaft with useful length 180 mm T-SET tool quick clamping Electronic horizontal positioning POS. 4 High precision shaft Engine 10 hp (7.5 kW) instead of 5.5 hp (4 kW) Brake for motors from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm Duolinop D Huae Uikst T-SET tool quick clamping Electronic vertical positioning POS. 5 High precision shaft Engine 10 hp (7.5 kW) instead of 5.5 hp (4 kW) Brake for motors from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET tool quick clamping POS. 6 Glass bead recovery unit Comprehends: PRL allows automatic transition from planing to function recovery of the glass stopper and vice versa. - operating group with shaft diameter 30 mm, length 30 mm - electronic horizontal positioning - electronic vertical positioning - hardware and PLC modifications for axis management - outgoing tandem and modified hood second advance group after universal

Condition: excellent (used), Working width 230mm Working height 140mm Number of spindles 7 Arrangement of spindles Bottom Right Left Right Delsvbwy Sein Uikjut Top Bottom Universal 360° ATS control system

Year of construction: 2004, Condition: excellent (used), Planer and moulder WEINIG Type Unimat EL 23 machine no. 101628 Deloi Ew I Nsin Uikout AB 20-230 mm AH 8-120 mm 1. lower horizontal spindle 2. right vertical spindle 3. left vertical spindle 4. upper horizontal spindle

Condition: reconditioned (used), Year of construction: 2006, High-speed planer. After full maintenance. Dujlin Ush Txd Ieikjt Model-Hydromat 5000 Year of manufacture-2006 №36650-280 Feed speed-6-200 m/min. Electric motor-30 kW. Working width-400 mm. Machining height-150 mm. Spindle arrangement: 1) Lower-37 kW 2) Upper-45 kW 3) Right-30 kW 4) Left -30 kW Table lubrication automatic All heads included Diameter of spindles - 50 mm.

Condition: good (used), Year of construction: 1992, Unicontrol in good condition Duslist Ea Ucjn Uikot

Condition: good (used), Year of construction: 1994, Weinig four-sided planer U23 with two new hydro knife shafts Delijpm Exmon Uiksut Please see the PDF data sheet for detailed information

Condition: used, Moulder Wadkin GD 5 - 220 IDC000096 - 5 spindle Dolin Uiju Dhgljkjut - 220 x 120 mm.

Condition: excellent (used), planing width 230mm feed on gimbals (7.5 kW) 10 heads: 1 bottom 7,5 kW 2 right 7,5 kW 3 left 7,5 kW 4 right 7.5 kW Dujlijuldn Hon Uikst 5 left 7.5 kW 6 top 7.5 kW 7 bottom 7.5 kW 8 top 7.5 kW 9 bottom 7.5 kW 10 universal 4 kW

Condition: like new (used), Functionality: fully functional, working width: 180 mm, planing height: 120 mm, spindle diameter: 35 mm, planing width: 120 mm, working height: 180 mm, total width: 1,100 mm, total height: 130 mm, total length: 3,300 mm, overall weight: 1,200 kg, spindle speed (max.): 6,000 rpm, rotational speed (min.): 6,000 rpm, height adjustment type: mechanical, number of spindles: 4, SCM P4F four-sided planer Specifications: - condition - used - manufacturer - SCM - model - P4F - working width - 180 mm - working height - 120 mm - connection power of the machine - 12.5 kW - star-delta start-up - rotation of heads - 6 000 rpm - electrical adjustment of planing height - manual adjustment of planing width - machine equipped with a set of heads and undercutter - input table 230 cm long and 18.5 cm wide - 2 working speeds of the machine ( 6 and 12 m/min ) - pressure of drawing rollers on springs Dolin Ujukp Nysiksut - soundproofing cabin made of sheet metal - original painting - suction nozzle - 4 x 120 mm - weight about 1200 kg - overall dimensions - 330 x 110 x 130 cm ( l. x w. x h. ) Additional information: - the machine is in excellent technical condition, ready for immediate use - presented photos illustrate the actual state of the object of sale - possibility to turn on and check the device on site - the price given in the auction does not include VAT and transportation costs

Condition: used, Year of construction: 2006, machine/vehicle number: IDC000042, - Planing width: 18 - 230 mm, Delinsq Nl Skj Uikjut - planing height: 6 - 160 mm, - Number of planer heads: 7, - speed: 7 - 36 m/min,

Condition: good (used), Working width 220mm Working height 120mm Number of spindles 5 Arrangement of spindles Bottom 5.5kw Right Left 11kw Top 10.5kw Dujlin Uotuyawsiket Universal 11kw Feed motor 2.2kw Feed on cardan shafts Pneumatic pressure pads

Condition: used, Moulder IDC000075 Dolistwy T Ron Uikeut - manufacturer: Wadkin - model: GA 220 - 4 years ago made renovation

Condition: excellent (used), GUBISCH GD4U four side planer 5 heads - max workpiece width 24 cm - max workpiece height 12 cm - 5 heads : 1) horizontal 24 cm - 5.5 kW motor 2) vertical right 12 cm - motor with power of 4 kW 3) vertical left 12 cm - motor of 4 kW power 4) horizontal top 24 cm - motor of 5.5kW power 5) 5 UNIVERSAL HEAD - rotatable at an angle of 360* - motor with power of 5.5kW - diameter of spindles 40 mm - ROLLER IN THE BOTTOM PLATE BEHIND THE 1ST HEAD - INPUT ROLLER IN FRONT OF THE FIRST PLANER SHAFT - PNEUMATIC PRESSURE ON DRAWING SHAFTS - FEED ON CARDAN SHAFTS - feed motor with power 2,2 kW - ELECTRICALLY ADJUSTABLE THICKNESS OF PLANING - length of the input table 188 cm - diameter of exhaust stubs 140 mm x 3; 110 mm x 2 Dslistugxxon Uikout Overall dimensions of the machine : - length 460 cm - width 220 cm - height 170cm

Condition: like new (used), Max planing width: 220 mm Duslin Ustqwkxeikot Max planing height: 120 mm Spindle diameter: 40 Number of spindles: 4 Order of spindles: bottom 4 kW right 3 kW left 3 kW top 4 kW Working table lubrication pump Electric lifting of the body Power supply: 400 V

Year of construction: 1965, Condition: excellent (used), Planing width 140 mm Planing height 120 mm Number of spindles 6 feed on the inverter rolls in the table order of spindles: 1) horizontal lower 3 kW 2) vertical right 2.2 kW 3) horizontal upper 4 kW 4) horizontal lower 4 kW 5) vertical right 4 kW Dolinjhxxnge Uikeut 6) vertical left 4 kW