WEINIG UNIMAT 23 four-sided planer

WEINIG unimat 23

Condition: used, Year of construction: 2002, machine/vehicle number: 96.164, functionality: unexamined, overall weight: 3,000 kg, spindle diameter: 40 mm, number of spindles: 6, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of spindles: 6 Spindle 1 Spindle type: Bottom Spindle diameter: 40 mm Spindle 2 Spindle type: Right Motor power: 11 kW Spindle diameter: 40 mm Spindle 3 Spindle type: Left Spindle diameter: 40 mm Spindle 4 Spindle type: Top Motor power: 11 kW Spindle diameter: 40 mm Spindle 5 Spindle type: Top Motor power: 7.5 kW Spindle diameter: 40 mm Spindle 6 Spindle type: Bottom Motor power: 7.5 kW Spindle diameter: 40 mm Infeed table length: 945 mm Diameter of feed rollers: 140 mm Conveyor motor: 14 kW Conveyor drive: Cardan shaft drive Tool type: Standard Lubrication system: Manual MACHINE DETAILS Diameter of extraction nozzle: 140 mm Voltage: 400 V Fuse: 63 A Dimensions & Weight Dimensions (L x W x H): 4,100 x 2,100 x 2,400 mm Empty weight: 3,000 kg Transport packages: 1 EQUIPMENT Tools for Spindle 1 Tools for Spindle 2 Tools for Spindle 3 Tools for Spindle 5 Tools for Spindle 6 NOTE Spindle 1 Gusdpsz Nir Rjfx Aipjh The brake is weak. The counter for the height adjustment is defective. Spindles 2 and 3 – shared motor The brake is defective. The height adjustment of Spindle 2 is very stiff and seized. The counters for the height and width adjustment of Spindle 2 are defective. The counters for the height and width adjustment of Spindle 3 are defective. Spindle 4 The spindle can only be turned with great difficulty; the bearings are defective. The height adjustment is seized. Spindle 5 The counter for the height adjustment is defective. Spindle 6 The width adjustment is seized, and the corresponding counter is defective. The motor emits a humming sound, presumably caused by the brake. Other defects The drive belts for spindles 1 and 6 are in very poor condition. The switch on the front of the machine for adjusting the table height is defective. The pressure reducing valve and the moisture separator need to be repaired or replaced. The lubrication pump is defective and needs to be repaired or replaced. The mechanism for speed regulation is defective and seized. The rubber coupling elements for the height adjustment are defective. Conclusion Due to the defects listed above, the machine could not be put into operation for testing purposes.

Condition: used, Weinig Unimat 23E automatic planing and profiling machine for four-sided planing and profiling of timber, featuring a grooved bed for short and curved workpieces and a long dressing table. Short-piece package Grooved bed Mobile spindle Gusdpfozrx Emsx Aipjh Technical data: - Spindles: 6 - Spindle 1: Bottom / 50 mm / 5.5 kW - Spindle 2: Right / 50 mm / 11 kW - Spindle 3: Left / 50 mm / Shared motor with spindle 2 - Spindle 4: Top / 50 mm / 5.5 kW - Spindle 5: Top / 50 mm / 5.5 kW - Spindle 6: Bottom / 50 mm / 5.5 kW - Working width: 230 mm - Working height: 160 mm - Planing table length: 2,500 mm - Feed: 5.5 kW - Axial stroke of vertical spindles: 80 mm - Axial stroke of horizontal spindles: 45 mm

Condition: used, Weinig Unimat 23 automatic planing and moulding machine for four-sided planing and profiling of timber, featuring the ATS system and reinforced Technical data: - Spindles: 6 - Spindle 1: Bottom / 40 mm / 7.5 kW / 8,000 rpm - Spindle 2: Right / 40 mm / 7.5 kW / 8,000 rpm - Spindle 3: Left / 40 mm / 7.5 kW / 8,000 rpm - Spindle 4: Top / 40 mm / 7.5 kW / 8,000 rpm - Spindle 5: Bottom / 40 mm / 7.5 kW / 8,000 rpm - Spindle 6: Universal / 40 mm / 7.5 kW / 6,000 rpm - Working width: 230 mm - Working height: 160 mm - Powered table roller: 1 - Feed rate: 24 m/min - Feed motor: 4 kW - Dressing table length: 2,500 mm Gedpezrx Afsfx Aipeuh

Condition: used, Weinig Unimat 23E automatic planing and profiling machine for four-sided planing and profiling of timber, featuring a mobile spindle for automatic adjustment and a grooving bed (optionally available without the grooving bed) for short and curved workpieces, as well as a long dressing table. Gusdszrxzhspfx Aipjh Technical data: - Optional: Conversion to a conventional smooth table, on request. - Spindles: 5 - Spindle 1: Bottom / 40 mm / 5.5 kW - Spindle 2: Right / 40 mm / 7.5 kW - Spindle 3: Left / 40 mm / Shared motor with spindle 2 - Spindle 4: Top / 40 mm / 7.5 kW - Spindle 5: Bottom / 40 mm / 5.5 kW - Working width: 230 mm - Working height: 160 mm - Feed: 4 kW / 5–24 m/min

Condition: used, The Weinig Unimat 23 SP automatic planing and splitting machine is designed for the precise planing or pre-planing and splitting of solid timber in a single operation. With four spindles, a working width of 230 mm and a working height of 120 mm, the machine is suitable for efficient processing in the timber industry. Technical data: - Spindles: 4 - Working width: 230 mm - Working height: 120 mm - Spindle 1: Bottom (5.5 kW) - Spindle 2: Top (5.5 kW) - Spindle 3: Right (11 kW) - Spindle 4: Left (11 kW) Gusdpfxezrxyws Aipeh - Feed: 5.5 kW

Year of construction: 1990, condition: reconditioned (used), 4-sided planer unimat U23, 7 heads 4-sided Weinig 7-head planer, 7 universal arrangement: horizontal, lower vertical, right, left, vertical, right, vertical, upper horizontal, lower horizontal, and the last universal. The drive is realized by means of cardans. The drive is secured with Rotax clutches. Pressure of the element using pneumatics. Feed smoothly regulated by an inverter. Machine feed 0-42 m/min. 2.5 kW and 7.5 kW engines. Grinding table and a new one. Additionally, new wiring and new electrics. The machine has been completely renovated. Warranty . Gujdpepqxnxsfx Aipeh

Condition: reconditioned (used), Year of construction: 1985, functionality: fully functional, 4-sided 8-head planer. head arrangement: lower horizontal, right vertical, left vertical, upper horizontal, right vertical, lower horizontal, upper horizontal, and the last universal, a new inverter and new cables were installed, smooth feed regulation. The machine has been completely renovated. Weight 4600 kg Gedpfevtpk Hex Aipjuh

Condition: ready for operation (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 5-24 m/min. WEINIG Unimat 23 E Planer and moulder ----- 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ----- Diameter 40 mm Speed ??6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??8,000 rpm Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 3. Spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-200 mm Max. groove depth 35 mm Axially travel 80 mm Pressure shoe in front of left spindle, including spring-loaded lateral roller pressure 4. Spindle, right 8.3 kW (motor replaced) ----- Gujdjxz Hh Uepfx Aipeh Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 5. Spindle, top 7.5 kW ----- Diameter 40 mm Speed ??8,000 rpm Tool travel 112-200 mm Max. groove depth 35 mm Axially travel 45 mm Split pressure shoe in front of upper spindle, adjustable to the tool travel and pivoting away from the tool, spring-loaded. 6. Lower spindle 4.0 kW ----- Diameter 40 mm Speed ??6,000 rpm Tool travel 112-250 mm Max. groove depth 15 mm Axially travel 45 mm Spindles in general ----- All groove spindles with high concentricity. Lubrication points for the axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely variable 5-24 m/min. Feed roller in front of the first lower tool pneumatically controlled up/down, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm Machine electrical system ----- Operating voltage 440 V (voltage range 380 - 420 V), 50 Hz. Machine frame, tables and stops ----- Infeed table 2.0 m long (incl. jointing guide) Manual Waxilit pump for table de-resin removal One driven rubber roller (spring-loaded in the outfeed table) Two driven rollers in the machine table, hardened Machine operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Extraction after the upper spindle with mechanical digital display. ATS/System, automatic 2-axis positioning for spindles 3 and 5 Minimum working height 12 mm Electric height adjustment of the upper spindles and the feed Central lubrication points on the front of the machine Electronic digital displays on spindles 3 and 5 (axial), spindle 6 (radial) and spindle 4 (axial and radial) Safety and noise reduction ----- Full safety enclosure Easily hinged safety hood with window. Covers the ent...

Condition: not inspected (used), Year of construction: 1993, Number of spindles 6 St. Working width 230 mm Working height 160 mm Feed motor 4 kW Dimensions (L/W/H) 4400 x 1800 x 1500 mm WEINIG Unimat 23 Automatic Planing and Grooving Machine For sale on behalf of a customer ----- Manufacturer’s Technical Specifications: Working width: 20–230 mm Working height: 6–160 mm Number of spindles: 6 Motor power per spindle: 5.5 kW (7.5 PS) Feed motor power: 4.0 kW (5.5 PS) Spindle speed: 6,000 rpm ----- ----- Planing table length: 2 m 1 adjustment gauge 2 planing heads, 240 mm 3 brake units are defective; these could be reinstalled by an electrician. ----- Additional technical data (former order confirmation) attached ----- Price of the above-mentioned machine upon request! ----- Gusdpfxozz Ai Uo Aipeh (Technical specifications according to the manufacturer—not guaranteed!) All prices listed are net, plus applicable sales tax.

Year of construction: 1997, condition: excellent (used), max width of the workpiece 23cm Guodpfx Aek Dxraoipeh max height of the workpiece 18cm 1 lower horizontal spindle 2 right vertical spindle 3 left vertical spindle 4 top horizontal spindle heads adjustable up / down, right / left spindle diameter 40mm Hydraulic side feed on the feeding table