Used Measuring systems for sale (284)

Condition: excellent (used), Measuring range: 200 - 225 mm Csbsffx Sbj E Ilugogt

Condition: like new (used), Functionality: fully functional, Geosig Accelerometer with recorder GeoSIG GMS plus Recorder Cgsbjq S Uz Ue E Ilugst model no GMSplus-IP67 Geosig Accelerometer/sensor Model AC73 Type HHV Vibration sensor and Recorder including accessories as shown in the photos. This Vibration sensor and Recorder is new/unused. In addition to this new unit, there is a stock of approximately 100 used sensors and 100 used recorders available.

Condition: like new (used), Precision indicator Millimess Mahr Cgjb E Ilusvmf Disgot Type 1003 (108146) Measuring range + - 50 micrometers Scale value 1 micrometer as new condition

Condition: excellent (used), GBS test pulse rev3 pulse generator for long-term insulation tests The test pulse is designed for long-term insulation tests on test specimens with a capacitance of up to 6 nF. Converter for high-voltage test transformer - Internal sine wave generator: 50-200Hz. - Pulse width modulation 16-24kHz of the sine wave via full bridge. - Inverter voltage 0-600V adjustable, Imax=2.6A, maximum power 1.3kW - Pulse current limitation 110A (switch-off threshold) Pulse transformer - control - Control via full bridge - Full bridge power supply adjustable 0-1000V, 1.3A max. - Pulse current limitation 100A (switch-off threshold). - Pulse width 20-120μs, nominal 94μs, adjustable - 2 selectable series inductances 150μH, 300μH to adapt the pulse width or rise times to the load capacitance and voltage. Cgsb E Iluju Ehh Eogst - Pulse repetition frequency 0.1 - 2.5 kHz, adjustable. - Polarity: Adjustable positive, negative or alternating depending on the polarity of the sinusoidal signal. - Cosine pulse at the transformer output Pulse transformer cascade - Output transformers in 5-fold cascaded circuit. - Total transformation ratio can be selected as 1:7.7, 1:10 or 1:15 by tapping. - Maximum output voltage 15kV with possible load capacities of:* 6nF with a pulse width of 73μs at a repetition frequency of 2.5kHz. repetition frequency of 2.5kHz * 10nF with a pulse width of 103μs at a repetition frequency of 1.25kHz - Voltage divider 1:1000 in parallel. - Overvoltage limitation at approx. 20-23 kV through parallel spark gaps - Thermistor for overtemperature detection in the 1st transformer stage. - Earth side

Condition: like new (used), Year of construction: 2022, operating hours: 5 h, Functionality: fully functional, Device was used for around 10 measurements, so it's like new. Sold due to system change Cjb E Iov D Dunjlugsgt GeoMax Zoom 3D Basic, Android-SET measurement system including high-quality wooden tripod Measurements and stationing have never been so easy and quick. Thanks to uncomplicated stationing, the intuitive Android software X-PAD MasterPlan and one-man operation, you can use the Zomm 3D from Geomax to speed up your daily work indoors and outdoors and transfer the plan into the field. The Zoom 3D is your perfect partner for indoor applications Leveling, plumbing points and staking out: no problem, the unique and user-friendly onboard software of the Zoom3D offers comprehensive functionality that will make your indoor applications go faster.

Condition: like new (used), Year of construction: 2022, Functionality: fully functional, measuring range X-axis: 10,000 mm, measuring range Y-axis: 5,000 mm, measuring range Z-axis: 5,000 mm, TECHNICAL DETAILS Measuring range X-axis: 10 m Measuring range Y-axis: 5 m Measuring range Z-axis: 5 m Measuring accuracy: ±(28 + 5 L/1,000) µm Repeatability: ±10 µm Cgjbsvzwxns E Ilugst EQUIPMENT - WM-3000 coordinate measuring system - Laptop with measuring software - Camera tripod - WM additional software 3D-CAD import/export with dongle - Battery charger - Measuring probe battery - Stylus ø 2.5 mm - Stylus ø 5.0 mm - Long RENISHAW stylus ø 10.0 mm - RENISHAW extension - Mouse, user manual in German (WM series accessories) - 2x Euro AC cable - Attachments for camera realignment - Calibration cone for needle probe - Magnets for attachments for camera realignment - Original case - Professional portable workstation (everything in one case)

Condition: excellent (used), Measuring range: 175 - 200 mm Cgeb Eeffx Spe Iluget

Condition: ready for operation (used), Year of construction: 2001, A Mitutoyo roundness analysis system without monitor is available. Rotation accuracy: 0.02 + H, rotation speed: 2/4/6/8/10 rpm, max. workpiece weight: 30kg, max. workpiece diameter: 500mm, machine weight: approx. 200kg, control: Roundpak-400, version: 3.002. Documentation available. On-site inspection is possible. Cebov Ac Spo E Ilugjgt

Condition: as good as new (ex-display), Year of construction: 2017, Optical measuring machine : METRIOS MT7575 Series number S.NO: PZ131017 Year 2017 Cgjb E Iov Aaqisluget Condition like new as practically never used. Price 20'000€ EXW

Condition: used, Mitutoyo Height micrometer Height Master 515-318 Measuring range 310 mm Cjbju Egyye E Ilugsgt Reading marks in 0.001 mm increments Quantity: 1 piece 3 pieces in stock

Year of construction: 2008, Condition: used, machine/vehicle number: 5024-581, Perm. ambient temperature: +0° C to +46° C Perm. relative humidity: 5% to 95% non-condensing Power input: CA 110 to 240 VAC (+/- 10%), 50/60Hz (+/-3Hz) Protection class: IP 64 Perm. angular acceleration: (55-2000 Hz) < 100 ms/s2 Measuring range (ball diameter): 2400 mm Single-point ball test: 0.013 mm Cob E Iomidx Ejlugsgt Single-point reproducibility test: 0.020 mm 3D longitudinal measurement uncertainty test: 0.029 mm Software: interface WinRDS Weight: 7.8 kg

Year of construction: 2003, Condition: like new (used), machine/vehicle number: 67099.031501, Used Ravas floor weighing scale Ravas floor weighing scale, model: RWB ND CE, serial number: 67099.031501, year of construction: 02-06-2003, max/min: 1500/20 kg, e=dd= 1kg, dimensions: 1300 mm x 900 mm x 50 mm. with wall display. Cgoboi E Hxxs E Iluget Benefits: Stainless steel scales can be safely used in the food or chemical industry. You can weigh palletized goods more easily than on a platform scale, because you don't have to climb the load on ramps. You can transport the scale easily, because it is equipped with wheels and handles You can sanitize these scales at any time, because they are IP68 certified You can easily weigh loads up to 1,500 kg on EUR1 pallets Price: 1.250 Euro + VAT, negotiable, FCA Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Measuring range: 150 - 175 mm Cgeb E Ilujfh H Stogjt

Condition: excellent (used), Year of construction: 2023, Functionality: fully functional, For sale 3D scanner MarvelScan by ZG. The scanner was used as a demonstration device for customers. It was purchased on 31.03.2023. The kit includes all kit components, such as the customer receives with a new device. DESCRIPTION: MarvelScan is a breakthrough product that is the first in the world that can scan without the help of a tracker and markers. It is a scanner with three sensors based on blue laser light. One of the cameras is used to capture data and position itself relative to the object being scanned. The two front cameras are used for precise data acquisition, and their positioning results in precise and fast measurements 3D scanning without reference points and tracker Thanks to the Inside-Out technology used throughout the scanning procedure, the operator does not need to place reference points on or near the scanned object. The same is true for the tracker, which tracks the position of the scanner and allows it to find its way through space. In this scanner, such a role is performed by a third laser light sensor, whose task is to position itself relative to the previously mapped room. The MarvelScan 3D scanner is a viable device in the "Plug & Scan" category. All you have to do is calibrate the space before starting the first scan, and the scanner will take advantage of this with each subsequent use. The solution makes scanning faster and more efficient, without wasting time preparing reference points or a tracker. Comparison of scanning modes on the MarvelScan model Ultrafast scanning 1,350,000 measurements/s - Standard mode 600,000 measurements/s - Fine mode Light source: 22 blue laser lines + additional single line - Standard mode 22 blue laser lines + additional 5 parallel lines - Fine mode Accuracy Up to 0.02 mm - Standard mode Up to 0.01 mm - Fine mode Distance 350 mm 150 mm Depth of field 450 mm 150 mm MARVELSCAN PERFORMANCE COMPARISON Scanning area: Up to 600 mm x 550 mm Laser class: Class II (eye safe) Resolution: Up to 0.02 mm Distance: 350 mm Depth of field: 450 mm ACCURACY - PHOTOGRAMMETRY Volumetric accuracy 0.02 mm/m Average deviation 0.007 mm/m Depth of field 600 mm ~ 5000 mm VOLUMETRIC ACCURACY Without markers 0.05+0.020mm/m With markers 0.015+0.035mm/m With embedded photogrammetry 0.015+0.035mm/m With photos 0.025+0.015mm/m Cob E Ilujrupl Negogt BOTTOM SCAN ACCURACY Up to 0.03mm Without markers 0.06+0.020mm/m With markers 0.025+0.035mm/m With embedded photogrammetry 0.025+0.020mm/m With photos 0.025+0.015mm/m DEPTH OF SHARPNESS: (best range) 550mm WEIGHT: 1.3kg DIMENSIONS: 300 x 150 x 70mm CONNECTION STANDARD: USB 3.0 OPERATING TEMPERATURE: -20~40℃ OPERATING HUMIDITY: 10%~90%

Condition: good (used), Flowmeter Endress+Hauser, Cgebjhcpwzs E Ilugst Promag 33H More diverse Types at offer!

Condition: excellent (used), GBS test pulse rev3 pulse generator for long-term insulation tests The test pulse is designed for long-term insulation tests on test specimens with a capacitance of up to 6 nF. Converter for high-voltage test transformer Cgob E Ilju Egz Rjugot - Internal sine wave generator: 50-200Hz. - Pulse width modulation 16-24kHz of the sine wave via full bridge. - Inverter voltage 0-600V adjustable, Imax=2.6A, maximum power 1.3kW - Pulse current limitation 110A (switch-off threshold) Pulse transformer - control - Control via full bridge - Full bridge power supply adjustable 0-1000V, 1.3A max. - Pulse current limitation 100A (switch-off threshold). - Pulse width 20-120μs, nominal 94μs, adjustable - 2 selectable series inductances 150μH, 300μH to adapt the pulse width or rise times to the load capacitance and voltage. - Pulse repetition frequency 0.1 - 2.5 kHz, adjustable. - Polarity: Adjustable positive, negative or alternating depending on the polarity of the sinusoidal signal. - Cosine pulse at the transformer output Pulse transformer cascade - Output transformers in 5-fold cascaded circuit. - Total transformation ratio can be selected as 1:7.7, 1:10 or 1:15 by tapping. - Maximum output voltage 15kV with possible load capacities of:* 6nF with a pulse width of 73μs at a repetition frequency of 2.5kHz. repetition frequency of 2.5kHz * 10nF with a pulse width of 103μs at a repetition frequency of 1.25kHz - Voltage divider 1:1000 in parallel. - Overvoltage limitation at approx. 20-23 kV through parallel spark gaps - Thermistor for overtemperature detection in the 1st transformer stage. - Earth side

Condition: good (used), 416 USED Confectionery beater, dough machine, dough mixer. EQUIPMENT: Cgob Eovr Dnqo Ilugot - kettle (capacity: 40 l) - whisks The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: good (used), Year of construction: 2004, machine/vehicle number: Z183-1000, A fully functional TESA Profile 130 is for sale. Cgeb E Ilujvkwg Rsget Can be viewed from the Bodenseekreis location

Condition: used, for Morse taper: MK 3 Cgjb Eecftvwj Ilugst incl. test pin, storage box

Condition: ready for operation (used), Magnification and measuring range (with 15-inch monitor): Macro mode Horizontal/Vertical: 12x: 24mm/18mm, 25x: 12mm/9mm, 38x: 8mm/6mm, 50x: 4.5mm/3.4mm. Micro mode horizontal/vertical: 40x: 7.6mm/5.7mm, 80x: 3.8mm/2.9mm, 120x: 2.5mm/1.9mm, 160x: 1.9mm/1.4mm. Zoom: 1x-4x, measurable height wide field mode/high magnification mode: 10mm/1mm, display resolution: 0.1µm. Repeat accuracy height/width measurement: 1µm/0.5µm, Measuring accuracy height/width measurement: 2µm/5µm. Stroke X/Y/Z: 184mm/88mm/90mm, rotation: +/-180°, inclination: +/-30°, working distance: 75mm. Documentation available. Cgsb E Iletx Dnzeugjt

Condition: good (used), MASS FLOW TRANSMITTER-PD340 Item: D_1596-Flowmeter-PD340, Cgeb E Ishcpwtslugot Digital flow meters Mass Flow Transmitter with or without display (New or used) PD340. Ø 1" - 4". For more informations please contact us!

Condition: new, Heidenhain ROD 800.0000 - 36000 Id.Nr. 298 466 06 Incremental angle encoders with integral bearing Cjb E Ilujgix Akjgsgt Series: ROD 800 System accuracy ± 1 Mechanically permissible speed 1000 min-1 Interface: " 1 VSS Scope of delivery: 1 piece Item condition: NEW Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, for Morse taper: MK 2 Cgsb E Iluscftvxogjt incl. test pin, storage box

Condition: ready for operation (used), Year of construction: 2022, A Scantech thickness gauge is available. Measuring frame: 5500mm, measuring width: 5200mm, material: PU/acrylate/EVA coating, backing: polyester/cotton, max. basis weight: 600g/m², parallel accuracy: less than 0.2mm, measuring gap: 60mm-80mm, web speed: 550m/min. Sensor XT10: PP: 2g-2000g/m², accuracy: +/-0.1%, resolution range: 2mm-10mm. The machine has never been used. Documentation available. On-site inspection is possible. Cgob E Ilsu Rp Hysuget

Condition: good (used), Mahr Perthen Perthometer S4P roughness tester 1 x Mahr Perthen Perthometer S4P roughness tester Cebsihfmue E Ilugogt 1 x Mahr Perthen 6 86 20 63 1 x Mahr Perthen 42 50 01 50 up to 160 mm Ø Find more roughness gauges in other sizes- new and used