Used material testing for sale (490)

Condition: excellent (used), Weiss Type: WK 27'/50-150 Climatic Test Chamber Water-cooled Technical Data: Test Chamber Designation: WK 27'/50-150 External Dimensions Height 3500 mm, Width 3400 mm, Depth 6000 mm Control Cabinet Dimensions Height 2000 mm, Width 2400 mm, Depth 400 mm Internal Dimensions Height 3000 mm, Width 3000 mm, Depth 3000 mm Floor load capacity: 30,000 N/m³ (surface load) Test chamber volume: approx. 27,000 liters Specimen mass: 1000 kg Cooling / Heating Operation -50°C to 150°C Heating rate: 1.0 K/min Cooling rate: 1.0 K/min Temperature stability: ±0.3 to 1.0 K (over time) Temperature stability: ±0.1 to 0.5 K (over time) Climatic Operation 10 to 90°C Ppsdpfx Aovx Nfbsmgsr Humidity: 10...98% rH Temperature stability: ±0.1 to 0.5 K (over time) Dew point range: +4 to +84°C 3/N / PE AC 400 V ±10% 50 Hz Weight: 7000 kg Refrigerants: R23 and R404A Equipped with extra floor plates to increase floor load capacity Important safety information for buyers: The following steps are carried out on all chambers we offer in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. After successful inspection, the chambers undergo a trial run monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Subject to alterations and errors in the technical data and specifications!) If you have further questions, we are happy to assist you by phone.

Condition: good (used), Weiss Type: Walk-in Climate Simulation Chamber WK 50 / 40-120 Technical specifications of the climate chamber: Temperature range: -40...+120 °C Temperature tolerance: +/- 0.5°C Temperature change rate: 1 K/min Humidity range: 15...approx. 95 % RH Ppjdsuvi R Ajpfx Amgsr Humidity tolerance: +/- 5.0 % RH Dimensions: Test space volume: 50 m³ External dimensions (W x D x H): approx. 4800 mm x 6100 mm x 2640 mm Test chamber (W x D x H): approx. 4500 mm x 5000 mm x 2200 mm Door opening (W x H): approx. 3000 mm x 2200 mm Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Condition: good (used), RS Simulators Type: Walk-in Climate Simulation Chamber KKC 22/45L Psdouvi Nfspfx Amgepr Technical Data: Temperature range: -40...+120 °C Temperature tolerance: +/- 1.5°C Temperature change rate: 1 K/min Humidity range: 10...approx. 95% r.H. Humidity tolerance: +/- 5.0% r.H. Dimensions: Test chamber volume: 22 m³ External dimensions (W x D x H): approx. 2600 mm x 6400 mm x 2800 mm Test chamber (W x D x H): approx. 2200 mm x 4700 mm x 2300 mm Door opening (W x H): approx. 2200 mm x 2300 mm Year of manufacture: 2009 Technical data for solar simulation: Control module: Mitronic STB1-8 Number of lamps: 8 Ballast unit: Mitronic CP2k5 – 2ZS Ignition unit: Hönle Lamp type: OSRAM Powerstar HQI 2000W W/D/S Condition: used / second-hand Scope of delivery: (see image) (Specifications subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Condition: good (used), RS Simulators Type: Walk-in Climate Simulation Chamber KKC 22/45 Technical specifications: Temperature range: -40...+120 °C Temperature tolerance: +/- 1.5°C Temperature change rate: 1 K/min Humidity range: 10...approx. 95% r.h. Humidity tolerance: +/- 5.0% r.h. Dimensions: Test chamber volume: 22 m³ Psdpfsuviydsx Amgepr External dimensions (W x D x H): approx. 2600 mm x 6400 mm x 2800 mm Test chamber (W x D x H): approx. 2200 mm x 4700 mm x 2300 mm Door opening (W x H): approx. 2200 mm x 2300 mm Condition: used Scope of delivery: (see picture) (Subject to change and errors in technical data!) We are happy to answer further questions by phone.

Condition: excellent (used), Here we offer a Feutron climate test chamber. Feutron Climate Test Chamber Temperature Temperature range: -40...90°C Climatic range (without heat load): 10...85°C Temporal temperature deviation during temperature operation: ≤ ± 0.5 K/min Temporal temperature deviation during climatic operation: ± 1.0... ± 1.5 K/min Change rates Heating: avg. 2.0 K/min Cooling: avg. 2.0 K/min Standard IEC 1646 is achievable with testing, solar modules up to max. 160kg weight and nonlinear ramps (setpoint jump) Drying Air drying: condensation drying Humidity Air humidification: steam humidification Humidity range: 10...95 % r.h. Temporal humidity deviation: ≤ ± 3.0... ±5.0 % r.h. Dew point range: 8...80.9°C Test Chamber Test chamber volume: 7.0 m³ Dimensions Internal dimensions: Width 1500 mm x Height 2250 mm x Depth 2000 mm Swing door DIN right, heated, Width 900 mm x Height 2100 mm Observation window, heated, with blackout shutter and lockable: Width 500 mm x Height 600 mm Feedthrough: 2x, right front side, Ø 75 mm Irradiation unit, test chamber Opening: 4x in left side wall for SC 2500, each 850 x 700 mm Irradiated area when using SC 2500: 1200 x 1200 mm Radiation intensity at 1.0 m wall distance: 1000 ± 10% W/m² Lighting: 1x halogen lamp, 200W Refrigeration system: Bitzer compressor, semi-hermetic, 2-stage, air cooled Condenser: split condenser (outdoor installation, winter control) Refrigerant: R507 / R23 Temperature control system Coolant medium Tyfocor / water Mixing ratio 50/50% Coolant density: 1.072 kg/dm³ Filling quantity: approx. 80 dm³ Pyranometer Temperature range: -40...150°C Max. radiation absorption: 4000 W/m² Spectral range (50% points): 305...2800 nm Sensitivity (nominal): 7 µV/W/m² Power supply, test chamber Mains connection: 400V, 3/N/PE, AC, 50Hz Connection type: hardwired Max. simultaneous power demand: approx. 32.0 kW Supply fuse: 3 x 63, Char C (A) Power supply, SolarConstant Mains connection: 400V, 3/N/PE, AC, 50Hz Connection type: Max. simultaneous power demand: approx. 30.0 kW Supply fuse: 3 x 63, Char C (A) Overall external dimensions of the test cell including: equipment room/control cabinet and control cabinet for SolarConstant 2500 External dimensions equipment room: Width 3440 mm x Height 2580 mm x Depth 2950 mm /control cabinet: Width 2200 mm x Height 1830 mm x Depth 1100 mm External dimensions condenser, split: Width 900 mm x Height 950 mm x Depth 2000 mm Weight test chamber (total): approx. 2700 kg Condenser empty weight: 153 kg Weight: 2700 kg Type: 3707/06 Condition: used Scope of delivery: (see picture) (Technical data and information are subject to change and errors!) Ppodpfxoklv H Io Amger For further questions, we are happy to assist you by phone.

Condition: good (used), TIRA Type: Walk-in Climate Simulation Chamber TCZ 4012 S(m) Technical Data: Temperature range: -40...+120 °C Temperature tolerance: +/- 1.0°C Temperature change rate: 1 K/min Humidity range: 10...approx. 95 % rH Humidity tolerance: +/- 5.0 % rH Dimensions: Test chamber volume: 13 m³ External dimensions (W x D x H): approx. 2260mm x 3850mm x 2780mm Test chamber (W x D x H): approx. 2254mm x 2645mm x 2251mm Door opening (W x H): approx. 2251mm x 2254mm Pjdpfouvipwex Amgjpr Condition: used Delivery contents: (see picture) (Subject to changes and errors in the technical data!) For further enquiries, please contact us by phone.

Condition: good (used), TIRA Type: Walk-in Climate Simulation Chamber TCZ 4020 S-2k Technical Specifications: Temperature range: -40...+140°C Temperature tolerance: +/- 1.0°C Temperature change rate: 2 K/min Humidity range: 10...approx. 95% r.h. Ppedeuviumspfx Amgsr Humidity tolerance: +/- 5.0% r.h. Dimensions: Test chamber volume: 19 m³ External dimensions (W x D x H): approx. 2660 mm x 4960 mm x 3300 mm Test chamber (W x D x H): approx. 2270 mm x 3190 mm x 2756 mm Door opening (W x H): approx. 2270 mm x 2756 mm Condition: used Scope of delivery: (see picture) (Specifications subject to changes and errors!) For further questions, we would be happy to assist you by phone.

Condition: used, mytron Type: T2240 Water-cooled temperature chamber Technical Data: External dimensions: Width 1435 mm, Height 1955 mm, Depth 2590 mm Test chamber dimensions: Width 1050 mm, Height 1400 mm, Depth 1600 mm Test chamber volume: approx. 2240 l Cable entry ports: 2 x 100 mm right 2 x 100 mm left Temperature range: –40 °C to +100 °C at 23 °C ambient temperature Temporal temperature constancy: +/- 0.5 °K Spatial temperature constancy: +/- 1.0 °K Cooling: water cooling Inlet and outlet: 1" internal thread Cooling water shut-off via solenoid valve when unit is OFF Fault indicator for refrigeration unit errors Cooling water consumption: inlet temperature approx. 15 °C, approx. 15 l/min, outlet temperature approx. 22 °C (with continuous cooling approx. 27 °C) Podpfevtl Hqjx Amgopr Power connection: 3NPE AC 50 Hz 400 V, 32 A CEE plug Power consumption: approx. 6.5 kVA Fusing: 3 x 20.0 AT, 3 x 10.0 AT Lighting: 25 watts each, left and right sides of test chamber Exhaust connection: DN 100 mm plug-in system Safety device: electronic over-temperature protection, fixed setting Smoke detection with alarm sound Viewing window: five-layer glass, 130 x 360 mm Refrigerant: R 404 A, approx. 10 kg Weight: approx. 850 kg Condition: used Scope of delivery: (see picture) (Specifications subject to change and error!) If you have further questions, we would be glad to answer them by phone.

Condition: excellent (used), Here we offer you a Thermotron temperature chamber. Pjdpfxsixtits Amgjpr Water-cooled Thermotron Temperature Chamber SE-1000-6-6 Internal dimensions (W x D x H): 1000 x 1000 x 980 mm Working chamber volume: approx. 980 liters Temperature range: -70ºC to 180ºC Overall heating rate: approx. 4.1 K Overall cooling rate: approx. 1.2 K Heating capacity (°C/min) -65º to 71ºC: 6.8°C Heating capacity (°C/min) -65º to 180ºC: 5.6°C Heating capacity (°C/min) -40ºC to 85ºC: 6.5°C Cooling capacity (°C/min) 85ºC to -40ºC: 4.7°C Cooling capacity (°C/min) 71ºC to -65ºC: 3.7°C Cooling capacity (°C/min) 180ºC to -65ºC: 4.3°C External dimensions (W x D x H): 1250 x 1900 x 2200 mm Electrical requirements: 400V / 5P / N / PE, 35 A Refrigerants: R508B and R404A Approximate weight: 900 kg Type: Thermotron SE-1000-6-6 Important information for you as a buyer: The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run monitored with calibrated devices. Condition: used Scope of delivery: (See picture) (Subject to change and errors in the technical data and information!) If you have any further questions, we will be happy to assist you by phone.

Condition: excellent (used), CTS Type: TW-60/9 Water-cooled temperature test chamber CTS Temperature Test Chamber Type TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature of -60°C 9 stands for: 9 m³ test chamber volume Technical specifications: Cooling unit: - Water-cooled, low-noise, semi-hermetic - Continuously variable capacity adjustment via electronic monitoring and control system - Environmentally friendly refrigerant R23 / R404A Control system: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numerical input of set values - Error messages in plain text - RS 232 interface - Free switching channels for customer-side test sample control Technical performance data: Temperature testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.1 to 0.5 K over time - Temperature change rate (measured in supply air, including test load and heat radiation): Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C - Test load: 420 kg solar cell modules, following 100% - Heat radiation: 3000 watts permanent The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test load, without heat radiation, and without additional equipment. Dimensions: - Test volume: 9 m³ - External dimensions (approx.): width 4140 mm, depth 2680 mm, height 3000 mm - Internal chamber dimensions (approx.): width 1600 mm, depth 2400 mm, height 2200 mm Operating data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 48.9 kW - Nominal current: 74.9 A - Protection class: IP 54 - Cooling water connections: supply/return R1 ¼", internal thread - Condensate drain, non-pressurized: R1", internal thread - Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) Pedpevb Hansfx Amgjpr (Specifications and technical data are subject to change and errors!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS Model: TW -60/9 Water-cooled temperature test chamber CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk-in Pedpfx Aovb E Uqjmgepr -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specifications: Cooling unit: - Water-cooled, low noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Control: - 32-bit controller - LCD operating panel - Digital display of set and actual values - Numeric input of set values - Fault messages in plain text - RS 232 interface - Free switching channels for external test item control Technical Performance Data: Temperature tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K (over time) Temperature change rate, average with test specimens and under radiant heat, measured at air intake: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% load - Radiant heat: 3000 W permanent Technical data based on ambient temperature +25 ​​°C, nominal voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: - Test chamber volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber internal dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating Data: - Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz - Rated power: 48.9 kW; Rated current: 74.9 A - Protection class: IP 54 - Cooling water connections: feed/return R1 ¼”, internal thread - Condensate drain unpressurized R1” internal thread - Weight: approx. 5609 kg Condition: used Delivery contents: (See image) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: excellent (used), CTS CW-60/11 – Water-Cooled Climatic Test Chamber The CW-60/6 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for performing temperature and humidity tests on multiple test specimens simultaneously. Device Description This climatic test chamber allows testing of the function or material properties of a test object under the influence of temperature and humidity. Excellent air circulation with a correspondingly high recirculation volume ensures effective transfer of conditions onto the test object. The air-handling compartment is located at the rear of the interior chamber. The aggregates are positioned behind the unit in a separate frame, providing easy access. The control system is housed in a separate control cabinet, with the control panel installed in the cabinet door. For dehumidification of the test chamber, the unit is equipped with a self-regenerating compressed air dryer. Fresh air can be flushed into the chamber via a blower. Ppjdox Anipepfx Amgsr Technical Specifications: Temperature Testing: - Temperature range: –60°C to +90°C - Temperature deviation: ±0.5 to 1 K (over time) - Spatial temperature deviation: ±1 K at 200 mm from the wall - Rate of temperature change (supply air, linear): - Heating: 2 K/min from –40°C to +85°C - Cooling: 2 K/min from +85°C to –40°C Climatic Testing: - Temperature range: +10°C to +95°C - Humidity range: 10% to 95% RH - Dew point range: +5°C to +89°C - Temperature deviation: ±0.5 K (over time) - Humidity deviation: ±2 – ±5% RH (over time) - No heat irradiation - Stabilized conditions Technical data relate to an ambient temperature of +25°C, rated voltage 400 V, without test objects, without irradiation, and without additional equipment. Dimensions: Interior (Test chamber / usable space): - Volume: approx. 11,000 liters (11 m³) - Internal dimensions (approx.): Width: 2,100 mm / Depth: 2,530 mm / Height: 2,200 mm (slight variations depending on configuration) External dimensions: - Width: 2,700 mm / Depth: 5,200 mm / Height: 2,520 mm (variations possible depending on door type, frame, accessories, etc.) Operating Data: - Rated power: 84.4 kW - Rated voltage: 400 V 3/N 50 Hz - Rated current: 131.4 A Technical design: - Refrigeration unit: Water-cooled, low-noise, semi-hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R23 / R404A - Weight: 6,000 kg Notes: - Inspection/viewing possible by arrangement (46325 Borken) - Shipping by carrier is possible – costs and arrangements on request - Scope of supply: (see picture) - (Changes and errors in the technical data reserved; all information is subject to change!) If you have any further questions, please feel free to contact us by phone.

Condition: excellent (used), RS Simulators Type: KKM 110/45 Manufacturer: RS Simulators, water-cooled Climatic chamber 110 m³ incl. condenser unit The KKM 110/45 model is part of the TKM/KKM modular system by RS Simulators—a modular climatic chamber that is assembled on-site. This design offers: Modularity: Individual segments are preassembled and set up at the customer’s location. This makes retrofitting (adding depth or expansion modules) and later relocation straightforward. Technical specifications climatic chamber: Manufacturer: RS-Simulatoren Prüf- und Messtechnik GmbH Model: KKM 110/45 External dimensions: 6200 x 9400 x 3400 mm (W x D x H), incl. technical attachments Internal dimensions: 5900 x 7000 x 2960 mm (W x D x H) Chamber door (double-leaf): 3600 x 2930 mm (W x H) Personnel door (single-leaf) in side wall: 1880 x 900 mm (H x W) Feedthroughs: 8 x Ø120 mm (4x left & 4x right) Windows: 1x (460 x 550 mm) in front chamber door, heated 1x (1260 x 1000 mm) in left side wall, heated Temperature range: -40°C to +120°C Temperature fluctuation: ± 0.8K – 1.5K as per DIN 50011 with empty test area Humidity range: 10% to 95% Humidity tolerance: +/- 5.0% Refrigerant: 2x R404A 52 kg 2x R23 17 kg Temperature change rate: Heating: 1.0 K/min Cooling: 1.0 K/min Electrical data: Voltage: 3x400V/N/PE Current: 340A Weight: approx. 2,000 kg Pjdpfx Amjwwg Uvogspr For your safety as a buyer, please note the following information! The following points are always carried out on the chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak testing with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Specifications and technical details are subject to change and error!) If you have further questions, we will be happy to answer them by phone.

Condition: excellent (used), Here we offer you a walk-in climate chamber. Manufacturer: RS-Simulatoren, water-cooled The chamber can be disassembled into three parts for transportation (bolted construction). Temperature range: -30°C to +100°C Refrigerants: 20kg R-404A + 20kg R-452A External dimensions (approx.): Width 3,920 mm, Depth 7,350 mm, Height 2,600 mm Test chamber/internal dimensions (approx.): Width 3,500 mm, Depth 5,400 mm, Height 2,110 mm Electrical data: 68kW rated power Voltage: 3x400V/PE, Current: 135A Model: KKM 40 / 45 S Ppodpfxoqw U Aas Amgor Further technical details will follow! For your peace of mind as a buyer, please note the following: We carry out the following procedures on all chambers offered: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful checks, the chambers undergo a documented test run Condition: used Scope of delivery: see picture (Subject to changes and errors in the technical data and specifications!) For further questions, feel free to contact us by phone.

Condition: excellent (used), Vötsch Vötsch Industrial Tempering Oven VTL 200/250/225 250°C 11.25 m³ 58 kW – Heat Chamber The oven will be available at a later date. Description: For sale is an industrial tempering oven / heating cabinet from Vötsch Industrietechnik GmbH. This unit is ideally suited for industrial tempering, drying, and heat treatment processes. Thanks to its large useful chamber, it is possible to process large or multiple components simultaneously. The oven is controlled by a JUMO IMAGO 500 controller, enabling precise temperature management and automated programs. Typical fields of application: Industrial production Plastics and metal processing Component drying Heat treatment Testing technology / Material testing Laboratory and research applications The system is of robust industrial quality and designed for continuous operation. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Model: VTL 200/250/225 Maximum temperature: 250 °C Temperature safety classes: TB Class 1 TWB Class 2 Interior: Usable volume: 11.25 m³ Internal dimensions: Width: 2000 mm, Height: 2500 mm, Depth: 2250 mm External dimensions: Width: 2900 mm, Height: 3530 mm, Depth: 2700 mm Load capacity: Internal chamber load capacity: 400 kg Floor surface load: 1000 kg Weight: Net weight: 1850 kg Electrical data: Connection: 3/N/PE AC 400 V ±10% / 50 Hz Rated current: 90 A Rated power: 54 kW Connected load: 58 kW Additional data: Minimum exhaust air volume: 600 m³/h Reduced exhaust air volume: 150 m³/h Purge time: 465 s Total steam space: 14.9 m³ Psdpfx Amsytrzfegspr Sound pressure level: < 70 dB(A) Temperature limiter shut-off temperature: 280 °C Selectable temperature limiter: 270 °C Weight: 1850 kg Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) Any further questions can be answered by phone.

Condition: excellent (used), Year of construction: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the extended safety and performance test package “P Plus”. This unit is not a regular laboratory incubator, but a high-quality safety test chamber, specifically developed for aging, performance, and safety tests of lithium-ion energy storage systems. Special Added Value: The unit is designed to reliably detect, monitor, and safely contain critical battery events – up to EUCAR Hazard Level 5 (fire/flames, but no explosion). Device Capabilities (Section 2 – Performance & Application): - Aging tests on lithium-ion cells - Performance tests (charge/discharge cycles under controlled temperature) - Temperature endurance and thermal cycling tests - Testing of both unpowered and cycled cells - Reproducible, precise temperature control throughout the usable chamber - Safe testing under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage applications Suitable for: - Battery and cell manufacturers - Research and development laboratories - Test laboratories & safety assessments - Automotive / E-mobility / Energy storage sectors P Plus Package turns the KB 720 into a dedicated battery safety test cabinet: Integrated Safety Features: - Automatic & manual CO₂ fire suppression system - Smoke detector with optical & acoustic alarm - Mechanical double-door locking (secure containment) - Spark protection in the chamber - Exhaust port with reversible overpressure flap - Ports for external inertization (e.g., nitrogen) - Emergency stop / manual triggering of suppression system - Access ports for charging and measurement cables Result: The unit is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames may occur without explosion or uncontrolled propagation. It is not an abuse or destruction test device, but rather a safe, standard-compliant chamber for real-world operating and fault scenarios. Technical Data: - Temperature range: –10°C to +100°C - Interior volume: approx. 698 liters - Shelves: 4 × stainless steel - Max. load per shelf: 45 kg - Max. total load: 100 kg Electrical Data: - Power supply: 200–240 V AC - Frequency: 50 / 60 Hz - Phase: single-phase - Power consumption: approx. 2.1 kW - Fuse rating: 16 A - Refrigerant: R134a - Protection class: IP 20 Dimensions & Weight: - External (W × H × D): approx. 1250 × 1950 × 900 mm - Internal (W × H × D): approx. 970 × 1250 × 576 mm In summary – What makes this device special: - True battery safety test chamber Ppsdpfex Sc Inex Amgjr - EUCAR Hazard Level 5 compliant - Integrated CO₂ suppression system - Large chamber (≈700 l) - High market and resale value - Weight: approx. 285–300 kg Condition: used Scope of delivery: (see picture) (Subject to technical changes and errors. All details without obligation!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Year of construction: 2022, Binder BINDER KB 720 Cooling Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device description: For sale is a BINDER KB 720 (E6) Cooling Incubator, year of manufacture 2022, equipped with the advanced safety and performance test package "P Plus". This device is not a standard laboratory incubator, but a high-quality safety test chamber specifically designed for aging, performance, and safety testing of lithium-ion energy storage systems. Special added value: The unit is designed to reliably detect, monitor, and safely contain critical battery events – up to EUCAR Hazard Level 5 (fire/flames, no explosion). What can the unit do? (Section 2 – Performance & Applications) - Aging tests on lithium-ion cells - Performance tests (charge/discharge cycles under temperature) - Continuous temperature runs and thermal cycling tests - Testing of unpowered and cyclically powered cells - Reproducible, precise temperature control throughout the usable space - Safe execution of tests under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage technology Suitable for: - Battery & cell manufacturers - Research and development laboratories - Test labs & safety testing - Automotive / e-mobility / energy storage sectors The P Plus package turns the KB 720 into a genuine battery safety test chamber: Integrated safety features: - Automatic & manual CO₂ fire suppression system Podpfx Amox Hf A Regopr - Fire detector with optical and acoustic alarm - Mechanical double-door locking mechanism (secure containment) - Spark protection inside the chamber - Exhaust nozzle with reversible overpressure flap - Ports for external inerting (e.g., nitrogen) - Emergency shut-off / manual activation of the extinguishing system - Ports for charging and measuring cables Result: The unit is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames may occur without the risk of explosion or uncontrolled spread. It is not an abuse or destruction test chamber, but a reliable, standards-compliant test cabinet for realistic operational and fault scenarios. Technical core data: - Temperature range: –10 °C to +100 °C - Interior volume: approx. 698 liters - Shelves: 4 × stainless steel - Max. load per shelf: 45 kg - Max. total load: 100 kg Electrical data: - Power supply: 200–240 V AC - Frequency: 50 / 60 Hz - Phase: single-phase - Power consumption: approx. 2.1 kW - Fuse: 16 A - Refrigerant: R134a - Protection rating: IP 20 Dimensions & weight: - External (W × H × D): approx. 1250 × 1950 × 900 mm - Internal (W × H × D): approx. 970 × 1250 × 576 mm In summary – why this unit is exceptional: - Genuine battery safety test chamber - Suitable for EUCAR Hazard Level 5 - Integrated CO₂ extinguishing system - Large chamber (≈700 l) - High market and resale attractiveness - Weight: approx. 285–300 kg Condition: used Scope of delivery: (see photo) (Subject to modifications and errors in technical data. All information is without guarantee!) If you require further information, please don't hesitate to contact us by phone.

Year of construction: 2011, condition: used, functionality: fully functional, Universal Testing Machine Inspekt Table Blue 5 kN Ppedeyyu I Nspfx Amgjr Mechanical Design: - 2 backlash-free ball screw spindles, driven by a DC servo motor, Fmax = 10 kN, stiffness 10 kN/mm - 1 test space up to nominal load: - Test space width: 420 mm - Max. test stroke without test tools, adapters, and KMZ: 1025 mm Travel Speeds: - Test speed: 0.0015 – 1000 mm/min at full load - Return speed: 1000 mm/min Force Measurement: - Measuring range: 0.8 – 100% of nominal load, Class 1 (optionally Class 0.5) (+/- 1% of the displayed value according to DIN EN ISO 7500-1) - Force measurement resolution: +/-180,000 digits at 20 ms integration time The machine is delivered with a factory test certificate. If factory or DKD calibration at the installation site is requested by the customer, this will incur additional costs. Crosshead Travel Measurement: - Incremental square-wave input with encoder monitoring, saves crosshead position - Crosshead travel resolution: 1 μm Dimensions (W x D x H) / Weight: - Load frame: 685 mm x 550 mm x 1420 mm / 100 kg – controller mounted on the load frame Standard Functions: - Force, displacement, and strain control - Overload protection, automatic force calibration - Specimen break detector, return function - Set-up mode via control panel with display (force, displacement) Data Processing: - USB 2.0 interface or LAN - Data transfer rate to PC: 50 Hz (standard); optionally, higher data acquisition frequency via special software add-on module - Internal data processing rate: 2 ms - Optional: up to 2 free slots for expansion cards (1-channel analog cards or 2-channel digital cards) for additional sensors Power Supply / Operating Conditions: - 115/230 VAC, 0.5 kVA, 50/60 Hz, 5–40°C, 20–80% humidity - Required options for operation: load cell, grips, PC (current standard, OS 8-10-11), test software 5000 N Load Cell - Measuring range: 5–5000 N for tension and compression, with nominal 2 mV/V output signal - Overload protection: +/-100% - Linearity: +/-0.05% - Hysteresis: +/-0.03% - Repeatability: +/-0.02% - Incl. 1.5 m connection cable and calibration certificate Supplied with Extensometer MFX 200 The MFX 200-B extensometer, with its robust construction and high measurement accuracy, is suitable for almost all specimens with an initial gauge length from 10 mm. All strains can be measured, from the modulus of elasticity up to specimen break. It can be used unrestrictedly in both the lower and upper test areas. In combination with the MFQ-A, r- and n-value measurements on sheet metal are also possible. Two different measurement systems are available, differing in their signal and technical specifications (see technical documentation).

Condition: excellent (used), RMS Electrodynamic Vibration Test System Vibration Exciter SW 3006+ Power Amplifier TGA 1500 Technical Data: Sine: 3.7 kN Pjdpfx Amehyly Rogopr Random: 3.7 kN Shock: 3.7 kN Stroke pk-pk: 26 mm Velocity: 0.9 m/s Acceleration: 80 g Cooling: air-cooled Condition: used Untested! Testing was not possible Scope of delivery: (see picture) (Changes and errors in the technical data may apply!) We are happy to answer further questions by phone.

Condition: excellent (used), RMS Type: SW 3509 + TGD 6000-000.00 amplifier and fan RMS Electrodynamic Vibration Test System Pedpfx Ashylymjmgopr Technical data: Sine: 7.5 kN Random: 6.7 kN Shock: 13 kN Displacement pk-pk: 25.4 mm Velocity: Sine 1.5 m/s Random 2.5 m/s Shock 2.5 m/s Acceleration: 100 g Cooling: Air-cooled Total weight approx. 4000 kg Condition: used Scope of delivery: (see image) (Changes and errors in technical specifications reserved!) We are happy to answer further questions by phone.

Year of construction: 2001, condition: used, Erichsen Universal Sheet and Strip Testing Machine Model 145-60 Condition: Used Year of manufacture: 2001 Technical Specifications Hydraulic drive Motor power max.: 11.5 kW / 1500 rpm Pump output (small pump circuit): 12.3 dm³/min Psdoyr R Uhspfx Amgopr Pump output (large pump circuit): 31 dm³/min Test cylinder Punching force: 665 kN / 160 bar Hydraulic test head opening Max. operating pressure: 95 bar Holding pressure: 50 bar Drawing force ranges, switchable Small drawing force range: 37 kN / 10 bar Medium drawing force range: 225 kN / 60 bar Large drawing force range: 600 kN / 160 bar Max. drawing stroke: 150 mm Max. drawing speed: 750 mm/min Drawing ram stroke display: Resolution 0.1 mm Electrical connection values Power supply: 400 V three-phase, 50 Hz Fuses: 25 AT and 35 AT Ambient operating temperature: between +5° and +50° C Dimensions, weight Dimensions (L/W/H): 1800 mm / 1320 mm / 1400 mm Net weight: approx. 2400 kg

Condition: ready for operation (used), Emco Test M4C 025 Universal Hardness Tester Hardness Testing Machine Test force range: 9.8-2450N Test height: 260 mm Throat depth: 200 mm Ppodpfx Aeyybt Esmger Max. workpiece weight: 50 kg Dimensions: 250 mm x 1055 mm x 750 mm (W x H x D) You are welcome to arrange an inspection appointment. We can also organise cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be provided, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop to see our other offers as well. All company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data or errors in the description of the item may occur and are subject to change.

Condition: excellent (used), Binder Type: Binder ED 53 For sale is a high-quality BINDER ED 53 drying oven, Made in Germany. This unit is ideally suited for laboratory, workshop, research, electronics, material testing, or hobby applications that require constant temperatures. Features: - Precise digital temperature display - Robust industrial-grade quality Podjynh E Aopfx Amgspr - Even heat distribution - Made in Germany - Ideal for professional applications Capabilities: The BINDER ED 53 is a precision drying oven with natural convection. It is used for: - Drying samples and materials - Heating components - Tempering of workpieces - Curing paints/coatings - Material testing at constant temperatures - Laboratory applications in schools, research, or industry The temperature can be set digitally and is reliably regulated. Thanks to its high-quality insulation and construction, the unit operates consistently and stably. Technical Data: - Model: BINDER ED 53 - Temperature range: up to 300 °C - Rated power: 1.20 kW - Connection: 230 V / 1N~ - Current draw: approx. 5.3 A - Frequency: 50–60 Hz - Protection class: IP20 - Temperature protection: DIN 12880 - Device class: 2.0 - Interior volume: approx. 53 liters - Approx. dimensions: - External: approx. 63 × 63 × 57 cm (W × H × D) - Internal: approx. 40 × 40 × 33 cm - Weight: approx. 40–45 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see photo) (Subject to changes and errors in the technical data. All data provided without liability!) For further questions, feel free to contact us by phone.

Condition: used, Espec Type: TSD-100 100 liters usable chamber volume for larger test specimens up to 30 kg. Compliant with all common international standards. Water-cooled Temperature range hot chamber: +60°C to +200°C Temperature range cold chamber: -70°C to 0°C Test chamber interior dimensions: 710 x 345 x 410 mm (W x H x D) External dimensions: 1100 x 1885 x 1965 mm (W x H x D) Water-cooled refrigeration unit Programmable control via touch panel Automatic defrosting Overtemperature protection Operating hours counter Mobile design (on castors) Psdsxugq Aepfx Amgspr 2 stainless steel specimen baskets Cable entry port ⌀ 100 mm Refrigerants: 3 kg R404A, 1 kg R23 Power supply: 400V 3Ph 50Hz Max. current consumption: 32A Condition: used Weight: 1100 kg Important safety information for buyers: The following procedures are performed on all chambers offered by us prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Upon passing inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in technical data and specifications!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Thermo Scientific Thermo Scientific Forced-Air Drying Oven UT 6200 F with external temperature control unit Single STW150 Temperature Control System 85°C Thermo Scientific Forced-Air Drying Oven UT 6200 F with external temperature control unit Complete laboratory temperature control and drying system Description – Function & Application For sale is a professional temperature control and drying system comprising: - Thermo Scientific / Heraeus Forced-Air Drying Oven UT 6200 F - Single Water Temperature Control Unit STW 150/1-3-10-K5 The forced-air drying oven ensures uniform temperature distribution inside the chamber and is ideal for drying, heating, and temperature-controlling samples, components, or materials. Heating is provided via the external water temperature control unit (external heater), resulting in highly stable, indirect, and gentle temperature management—without local overheating and with homogeneous heat distribution. Typical areas of use: - Laboratory & research - Industry & production - Materials testing / component drying - Tempering, heating, drying at constant temperatures Robust laboratory and industrial quality—reliable and durable. Device 1 – Forced-Air Drying Oven: Manufacturer: Thermo Scientific / Heraeus Model: UT 6200 F Technical Data: - Max. temperature: 85°C - Operating voltage: 230 V - Frequency: 50 / 60 Hz - Power consumption: 0.6 A - Power: 0.14 kW - Protection class: IP20 Dimensions & Weight (approx.): - External dimensions: 895 × 816 × 715 mm - Inner chamber: 554 × 644 × 503 mm - Volume: approx. 180 liters - Weight: approx. 100 kg Device 2 – Water Temperature Control Unit: Manufacturer: Single Temperiertechnik GmbH Model: STW 150/1-3-10-K5 Technical Data: - Heat transfer medium: water - Connection: 400 V / 3~ / PE / 50 Hz - Power consumption: 6.9 A - Heating capacity: 9 kW - Apparent power: 4.7 kVA - Max. temperature: 150°C Dimensions & Weight (approx.): - Dimensions: 30 × 75 × 60 cm - Weight: 55 kg Ppsdpfx Amoymn Egegsr Total: - Complete temperature control and drying system - Joint operation possible (external heating / external heater) - Total weight: approx. 155 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) (Specifications are subject to change and error!) For further questions, we are happy to assist you by phone.