Hardness Tester Universal

Wolpert Dia Testor 2Rc

Condition: good (used), Robust universal hardness tester suitable for Rockwell, Vickers, and Brinell measurements. Iodpfx Adewg R Ths Neht Sturdy machine stand designed for rugged everyday use. Measuring systems: - Measuring head with ground glass - Rockwell with dial Test height 300 mm Test depth 150 mm Hardness tester dimensions L x W x H 610 x 350 x 940 mm, without base frame Machine weight approx. 260 kg

Year of construction: 1982, condition: used, Technical details: z-travel: 260 mm pressure capacity max.: 49 - 7355 (Prüflast) N checking height: 260 mm workpiece weight: max. 160 kg throat: 200 mm interface: RS 232 voltage: 230V / 50Hz V total power requirement: 200 VA machine weight approx.: 250 (ohne Unterschrank) kg dimension machine xH: 0,7x 0,6 x 1,8 (mit Unterschrank) m The hardness tester with depth measurement operating mode is on sale with a base cabinet from Emco for hardness testers. The device is suitable for testing the following methods(Specifications according to manufacturer): Metals according to Brinell, Vickers, Rockwell Plastics testing according to DIN 53 456 Other materials for testing only after consultation with the manufacturer. Test loads: electronically controlled via microprocessor, DMC and DC motor for M4R-075 = 49 to 7355 N Test table height adjustable via handwheel; Ø 90mm Test bench mounting according to DIN 51 225 = Ø 25mm Operation and programming via control panel accessories: a few test tables and plates (comparable with the pictures) * Iodpfx Adsu N Avxj Noht

Condition: used, Year of construction: 1957, brinell hardness 250 kg rockwell hardness 150 kg throat 130 mm checking height 300 mm weight of the machine ca. 0,150 t dimensions of the machine ca. 650 x 530 x 1550 m Iedpfx Aju T R Tksd Nsht Tests possible by system Rockwell, Vickers, Brinell. This device is a used one. Therefore we sell it without warranty.

Condition: used, Year of construction: 1985, rockwell hardness s. Fotos brinell hardness s. Fotos weight ca. 350 kg universal Hardness tester Rockwell, Brinell, Vickers with drawer cabinet Ihjdpfxswugrij Ad Not accessories as seen in photos all technical data without guarantee

Condition: used, LECO LM - 100 AT Small load and micro hardness tester Year of construction: 2010 Test force ranges from 0.001 - 2 kgf Manual or automatic turret with up to 4 objectives and 2 test diamonds simultaneously PC is included in the scope of delivery --> Software could not be tested as the graphics card is missing. Ihjdpfx Adsrtn D Ij Not You are welcome to come by for a viewing. We are happy to arrange a cost-effective shipping company for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Year of construction: 2025, condition: new, ASK - 0 Hanger Type Shot Blasting Machine; It is used for polishing sheet and metal parts which have come out of press and heat treatment, cleaning and roughening of castings, preparation before paint and rubber coating, taking forging parts to canvases and revision of old parts. (Quantity x Diameter): Ø: 800 H: 700 has 2 turbine x Ø 325mm with 6 blades The cabin is made of ST-37 sheet metal and the hot pot area is supported by Brinell or Manganese wear plate. The interior of the cabinet is covered with a rubber sheet to prevent it from being exposed to abrasion due to the sandblasting process. Rubber sheets are fixed to the cabinet with moldings. (Coating with a complete manganese armor is optionally offered to our customers.) The wear plate cladding is screw-in design for future wear-based replacements. It can be easily changed by authorized personnel in your company. Iodjvkf Agepfx Ad Noht Although the cabin door can be pneumatic or manual, it is designed as a winged system and 2 pieces. The cabinet door has a lock system to prevent it from being opened during the blasting process. In addition, there is a sensor or switch on the cabinet that stops sandblasting when the door is open. The system consisting of rail line, suspension gear system and crane (optional) is designed to allow the material to be sanded to move easily inside the machine. Full automation panel is available. Panel materials are Siemens / Schineider brand. Machine control is provided with a 10” PLC screen.

Year of construction: 2002, condition: used, Technical details: control: Soft - PLC burner heads: 1 Stück Distance between centres: ca. 4000 mm Rotary-table: Ø 890 mm Rotary-table: drehbar 360° mm Rotary-table: schwenkbar: 130° mm electrics - voltage/frequency: 3x400 V / 50 Hz V/Hz total power requirement: ca. 22 kVA weight of the machine ca.: 5,0 t dimensions L x W x H: 5,7 x 2,4 x 2,8 m dimensions electric cabinet: 1600 x 640 x 1500 mm PTA-welding, Plasma coating system Plasmabeschichtungsanlage mit 8-Achsen Performance: Coating of sealing plates, seat rings, cones, tapered spindles and other wear parts. Powder dosing system: -control process control system / adjustment of the powder quantity -Powder quantity approx. 10kg, powder grain size 25µ - 500µ -Quantity regulation of the powder dosage Current source: -control MOSFET; rangePilot max. 200A and Tranfer 300A -digital display -air cooled -control 0-10V / 0-20mA Plasma torch: -water cooled -continuous power P max. pilot 100A and transfer 300A High frequency ignition unit: -HF generator for arc ignition Gas control system: -process controlled for fully automatic flow. -plasma gas system flow unit electrically controllable -gas = Argon 99.99 pure gas -flow rate plasma gas system 0,05 - 5 l/min.; powder gas system 0,50 - 20 l/min.; protective gas system 1,50 - 30 l/min. Ihodpfx Adeu Nwf Ij Nst Support stand with moving tip Water cooling unit Control panel Housing *

Condition: used, volt / V ampere / A weight / kg Power / KW weight 180 kg SIEMENS engine Type: 1LA5207-4AA61 Power: 30kW Speed: 1465 rpm Ihedpfx Ajntcursd Net Power: 34.50 kW Speed: 1760 rpm

Condition: ready for operation (used), A profile hardening system (inductor) AEG-Elotherm Elomat V/N/180/3 is available. The nominal output is 200kW. The system is fully functional and is offered including various coils. Isdpfxottv Tro Ad Neht