Used material testing for sale (478)

Condition: excellent (used), We are offering a Weiss temperature test chamber for sale. Weiss Temperature Test Chamber with S!MCON / 32-controller, water-cooled Control Unit: "Touchpanel" All control and operation commands can be initiated by simply touching the function symbols on the "Touchpanel" control unit. Adjustable Feet The test chamber is equipped with adjustable feet to compensate for floor unevenness and to provide adequate ventilation for the machine section. Cable Ports Cable ports are installed on both the right and left sides of the test chamber. These allow measurement cables and test devices to be routed into the test space. Ports included as standard: - R1: NW 125 mm - L1: NW 50 mm (The refrigerant has been converted to R-452A) Test Chamber Volume: approx. 600 liters External dimensions with hinges and door lock: Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions without hinges and door lock: Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Temperature Test Data: Temperature range: -42 to +180 °C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (according to IEC 60068-3-5): - Heating: 4.0 K/min - Cooling: 3.0 K/min Maximum thermal compensation: 2500 W Operating Data: - Test chamber lighting: Halogen bulb 2 x 24V, 50W - Rated voltage: 3/N/PE AC 400V ±10% 50Hz - Rated current: 15 A; Rated power: 7.8 kW - Fuse (on-site): 16 A slow-blow - Sound pressure level: approx. 58 dB(A) (measured 1 m in front, 1 m height) - Refrigerant: R-452A - Weight: 620 kg Type: WT3-600/40 Important information for your safety as a buyer! Dksdpfxsyguh Ie Af Djh The following steps are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. Refill with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors reserved!) We are happy to answer any further questions by phone.

Condition: excellent (used), Weiss Type: WK11 - 600/70/5 Weiss Climate Chamber Water-Cooled The Weiss climate chamber WK11-600/70/5 with approximately 600 liters usable volume is suitable for temperature and humidity testing, as well as for the conditioning of samples and materials in a range from −70 °C to +180 °C. Simcon/32 - Net controller Technical Data: Test chamber designation: WK11-600/70/5 External dimensions with hinges and door lock: Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door lock: Height 1995 mm, Width 1000 mm, Depth 800 mm Internal dimensions: Height 950 mm, Width 800 mm, Depth 800 mm Feedthroughs: 2x R1 NW 125 mm ∅ 1x L1 NW 50 mm ∅ Test chamber volume: approx. 600 liters Temperature Test Data: Temperature range: -70 °C to +180°C Temporal temperature deviations at the center of usable space: ±0.1 to ±0.5 K Spatial temperature deviations: ±0.5 to ±2 K Temperature gradient: 1 to 4 K Temperature change rate: Heating: 6 K/min Cooling: 6 K/min Heat compensation: At +20 °C: 5000 W At -20 °C: 5000 W Climate Test Data: Temperature range: +10 to +95 °C Humidity range: 10 to 98% r. H. Dodpjyglb Sofx Af Dskh Temporal temperature deviations at the center of usable space: ±0.1 to ±0.3 K Spatial temperature deviations: ±0.5 to ±1 K Temperature gradient: 1 to 2 Humidity fluctuation (temporal, center of usable space): ±1 to ±3% r. H. Heat compensation: 500 W 3/N/PE AC 400V ±10% 50Hz Rated power: 16.5 kW Rated current: 29 A Main fuse (to be provided by customer): 32 A slow-blow Permissible test material weight: Total load of racks: 80 kg Test chamber floor: 80 kg, Insert rack: 40 kg Weight: 675 kg Refrigerants: R452A / R23 Important Note: "The table shown in the photos is not included in the sale." For your safety as a buyer, please note the following information: The following points are completed on our offered chambers beforehand: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical specifications subject to change and errors excepted!) We are happy to answer any further questions over the phone.

Year of construction: 1982, condition: used, Technical details: z-travel: 260 mm pressure capacity max.: 49 - 7355 (Prüflast) N checking height: 260 mm workpiece weight: max. 160 kg throat: 200 mm interface: RS 232 voltage: 230V / 50Hz V total power requirement: 200 VA machine weight approx.: 250 (ohne Unterschrank) kg dimension machine xH: 0,7x 0,6 x 1,8 (mit Unterschrank) m The hardness tester with depth measurement operating mode is on sale with a base cabinet from Emco for hardness testers. The device is suitable for testing the following methods(Specifications according to manufacturer): Metals according to Brinell, Vickers, Rockwell Plastics testing according to DIN 53 456 Other materials for testing only after consultation with the manufacturer. Test loads: electronically controlled via microprocessor, DMC and DC motor for M4R-075 = 49 to 7355 N Test table height adjustable via handwheel; Ø 90mm Test bench mounting according to DIN 51 225 = Ø 25mm Operation and programming via control panel accessories: a few test tables and plates (comparable with the pictures) Dksdpou N Avxjfx Af Doh *

Condition: excellent (used), CTS Type: T-40/600 Water-cooled temperature test chamber Control system: - 32-bit controller - LCD operator panel - Digital display of setpoint and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free relay channels for user-side test item control Technical specifications Dodjx E Tq Tepfx Af Dekh Temperature tests: Temperature range: -40 °C to +180 °C Temperature deviation: ±0.1 to ±0.3 K (over time) Temperature change rate according to IEC 60068-3-5: Heating: 2.5 K/min Cooling: 2.5 K/min Thermal radiation: approx. 2500 W at +20°C approx. 2500 W at +0°C approx. 1800 W at -40°C Technical data based on ambient temperature of +25°C, rated voltage 400V, without test specimen, no heat input, and without additional equipment. Dimensions: Test chamber volume: 600 liters Test chamber interior dimensions (HxWxD): approx. 850 mm x 850 mm x 830 mm External dimensions (HxWxD): approx. 1900 mm x 1120 mm x 1875 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 7.1 kW Rated current: 12.3 A Protection class: IP 22 Weight: approx. 700 kg Refrigerant: R-452A Weight: 700 kg Important safety information for buyers: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After a successful check, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Specifications and details are subject to change and errors reserved!) We are happy to answer further questions by phone.

Condition: excellent (used), RS Simulators Dsdewwg Uvspfx Af Dokh Type: KKM 110/45 Manufacturer: RS Simulators, water-cooled Climatic chamber 110 m³ incl. condenser unit The KKM 110/45 model is part of the TKM/KKM modular system by RS Simulators—a modular climatic chamber that is assembled on-site. This design offers: Modularity: Individual segments are preassembled and set up at the customer’s location. This makes retrofitting (adding depth or expansion modules) and later relocation straightforward. Technical specifications climatic chamber: Manufacturer: RS-Simulatoren Prüf- und Messtechnik GmbH Model: KKM 110/45 External dimensions: 6200 x 9400 x 3400 mm (W x D x H), incl. technical attachments Internal dimensions: 5900 x 7000 x 2960 mm (W x D x H) Chamber door (double-leaf): 3600 x 2930 mm (W x H) Personnel door (single-leaf) in side wall: 1880 x 900 mm (H x W) Feedthroughs: 8 x Ø120 mm (4x left & 4x right) Windows: 1x (460 x 550 mm) in front chamber door, heated 1x (1260 x 1000 mm) in left side wall, heated Temperature range: -40°C to +120°C Temperature fluctuation: ± 0.8K – 1.5K as per DIN 50011 with empty test area Humidity range: 10% to 95% Humidity tolerance: +/- 5.0% Refrigerant: 2x R404A 52 kg 2x R23 17 kg Temperature change rate: Heating: 1.0 K/min Cooling: 1.0 K/min Electrical data: Voltage: 3x400V/N/PE Current: 340A Weight: approx. 2,000 kg For your safety as a buyer, please note the following information! The following points are always carried out on the chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak testing with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Specifications and technical details are subject to change and error!) If you have further questions, we will be happy to answer them by phone.

Condition: excellent (used), Weiss Model: WT11-1300/70/15/S Weiss Umwelttechnik Temperature Chamber WT11-1300/70/15/S 1300 Liters –70°C to +180°C – 44 kW – Industrial System Water-cooled For sale is a professional Weiss Umwelttechnik temperature chamber. This unit is designed for demanding environmental simulations in industrial applications, making it ideal for material testing, electronics, automotive, aerospace, and research. The test chamber provides extremely rapid temperature cycling and a large test volume. Technical Data: Model: WT11-1300/70/15/S Test chamber volume: 1300 liters Temperature range: –70 °C to +180 °C Heating rate: up to 15 K/min Cooling rate: up to 10 K/min Temperature deviation: over time ±0.3–0.8 K / spatial ±0.5–2 K Humidity range (optional): 10–95% r.h., +10 to +95 °C Sound pressure level: approx. 73 dB(A) Electrical Data: Voltage: 3/N/PE AC 400 V ±10% Rated power: 44 kW Rated current: 63 A Refrigerants: R404A (14.0 kg) R23 (5.4 kg) Pressure stages: ND 18 bar / LP 19 bar / HD 25 bar External dimensions: Overall width: approx. 3,200 mm Overall depth: approx. 2,125 mm Dedsx Eknpjpfx Af Djkh (1,385 mm housing + 740 mm door area / radius opened) Overall height: approx. 2,020 mm Internal test chamber dimensions: Internal width: approx. 1,000 mm Internal depth: approx. 1,060 mm Internal height: approx. 1,230 mm Equipment: - Stainless steel test chamber 1.4301 - Viewing window in the door - Touch panel control - Access ports: R1: 125 mm L1: 50 mm - Connection for automatic water refill - Cooling water supply and return connections - Overflow/condensate connection - Safety monitoring & alarm system Ideal for: - Automotive / E-Mobility - Aerospace - Research & Development - Electronics testing - Materials laboratories / Quality assurance Volume: 1300 liters Weight: approx. 1,900 kg Important Note for Your Safety as a Buyer! The following procedures are always carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If needed, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (see picture) (Technical data and specifications are subject to change and errors!) We are happy to answer further questions by phone.

Year of construction: 2013, condition: good (used), Universal testing machine Zwick/roll Type: 1488 Modernized in 2013 with software Dksdexw N Uvjpfx Af Djh Test force max.: 200 kN Required space: width: 2,000 mm, height: 2,100 mm, depth: 800 mm, weight approx. 1,000 kg.

Condition: excellent (used), Zwick/Roell ProLine 10 kN Universal Testing Machine – testXpert II V3.61 Description: For sale is an electromechanical universal testing machine Zwick/Roell ProLine with a nominal force of 10 kN, equipped with a Zwick/Roell Xforce-P load cell and the materials testing software testXpert II, version 3.61. The system is suitable for standardized and customer-specific materials testing in quality assurance, research, development, and production. Its modular design allows the use of different testing methods and fixtures. Software – Zwick/Roell testXpert II V3.61 The machine is controlled via the professional testXpert II V3.61 testing software. This software is an industry standard in materials testing and enables: - Creation, management, and execution of test specifications - Real-time measurement of force, displacement, and time - Automatic test sequence control - Graphical display of measurement curves - Standard-compliant evaluation and test reports - Export of measurement results (e.g., PDF, CSV – depending on configuration) Several test routines (e.g., tensile, compression, and calibration procedures) are provided on the system (see software screenshots). Possible test methods: With the available equipment, the following tests can be performed, among others: - Tensile tests (e.g., plastics, metals, composites) - Compression tests - Bending tests - Determination of Fmax / breaking force - Force and displacement monitoring - Calibration and adjustment procedures for load cells (The available test methods depend on clamping jaws and fixtures used.) Technical data: Manufacturer: Zwick/Roell Model: ProLine Nominal force: 10 kN Load cell: Zwick/Roell Xforce P Sensitivity: 2 mV/V Electrical data: Power supply: 230 V Djdpeyc R R Dsfx Af Dekh Frequency: 50 / 60 Hz Current consumption: 3.5 A Connection: 1L / PE / N Dimensions & weight (approx.): Height: approx. 1,900 mm Width: approx. 800 mm Depth: approx. 700 mm Weight: approx. 200 kg Important note: "The table shown in the photos is not included in the scope of delivery." Condition: used Scope of delivery: - Zwick/Roell ProLine 10 kN testing machine - Xforce-P load cell (10 kN) - Control unit - PC with testXpert II V3.61 - Fixtures/tools as shown in the pictures (Subject to changes and errors in technical specifications! All details provided as is.) For further questions, we would be happy to assist you by phone.

Year of construction: 2021, condition: excellent (used), Weiss Type: TempEvent T/340/40/3/S Air-cooled temperature test chamber Weiss Technik TempEvent T/340/40/3/S Temperature Test Chamber −40 to +180 °C Year of manufacture: 2021 Description – Function & Application: For sale is a professional temperature test chamber: Weiss Technik TempEvent T/340/40/3/S. This unit is designed for the targeted heating and cooling of test specimens under reproducible conditions. It is used in industry, laboratories, and research & development to test the temperature behavior, functional reliability, and durability of products. Typical fields of application: - Temperature and function tests of lithium batteries and accumulators - Testing of electronics, assemblies, and components - Quality, endurance, and stress testing - Research and industrial quality assurance The chamber is air-cooled and features a recirculating air system for uniform temperature distribution inside the chamber. Operation is via an integrated touch control panel with program and monitoring functions. The chamber is equipped with a reinforced safety door with viewing window. Certified explosion protection (e.g., ATEX/tertiary explosion protection) is not specified. Suitability for specific tests—especially battery or safety testing— is the responsibility of the operator. The unit has been tested, serviced, and is fully functional. Technical data (excerpt) Manufacturer: Weiss Technik Type: TempEvent T/340/40/3/S Year of manufacture: 2021 Temperature Key data for temperature tests: - Temperature range: -40°C to +180°C - Temperature change rate, cooling: 4.0 K/min Djdpoycvd Njfx Af Dokh - Temperature change rate, heating: 3.2 K/min - Cooling: air-cooled - Refrigerant: R449A (approx. 2.5 kg) Electrical data: - Rated voltage: 3/N/PE AC 400 V ±10% / 50 Hz - Rated current: 12.5 A / Rated power: 4.1 kW Equipment: - Stainless steel interior - Recirculating air fan for homogeneous temperature distribution - Reinforced safety door with inspection window - Touch control panel - Status signal lamp Dimensions & weight (approx.): - Test chamber internal dimensions: Height 750 mm x Width 580 mm x Depth 450 mm - Housing dimensions: Height 1800 mm x Width 895 mm x Depth 1810 mm - Test chamber volume: approx. 335 liters - Refrigerants: R449A & R23 - Weight: approx. 470 kg For your safety as a buyer, please note the following information! The following checks are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data! Specifications are subject to confirmation.) If you have any further questions, we will be happy to assist you by phone.

Year of construction: 2021, condition: excellent (used), Weiss Model: TempEvent T/340/40/3/S Air-Cooled Temperature Test Chamber Weiss Technik TempEvent T/340/40/3/S Temperature Test Chamber −40 to +180 °C, Year of manufacture: 2021 Description – Function & Applications: For sale is a professional temperature test chamber, Weiss Technik TempEvent T/340/40/3/S. The system is designed for targeted heating and cooling of test specimens under reproducible conditions. It is used in industrial, laboratory, and development environments to test the temperature behavior, functional safety, and durability of products. Typical application areas: - Temperature and functional testing of lithium batteries and accumulators - Testing of electronics, assemblies, and components - Quality, endurance, and stress tests - Research and industrial quality assurance The chamber operates air-cooled and is equipped with a recirculation system to ensure uniform temperature distribution within the interior. Operation is via an integrated touch control panel with programming and monitoring functions. The chamber features a reinforced safety door with observation window. Certified explosion protection (e.g., ATEX / tertiary explosion protection) is not specified. Suitability for special tests—particularly battery or safety testing—is the responsibility of the operator. The unit has been inspected, maintained, and is fully functional. Technical Data (excerpt) Manufacturer: Weiss Technik Model: TempEvent T/340/40/3/S Year: 2021 Temperature: - Test temperature range: -40°C to +180°C Djdpeycvdiefx Af Dokh - Cooling rate: 4.0 K/min - Heating rate: 3.2 K/min - Cooling method: Air-cooled - Refrigerant: R449A (approx. 2.5 kg) Electrical Data: - Rated voltage: 3/N/PE AC 400 V ±10 % / 50 Hz - Rated current: 12.5 A / Rated power: 4.1 kW Features: - Stainless steel internal chamber - Recirculation fan for homogeneous temperature distribution - Reinforced safety door with viewing window - Touch control panel - Status signal light Dimensions & Weight (approx.): - Test chamber interior: Height 750 mm x Width 580 mm x Depth 450 mm - Exterior dimensions: Height 1800 mm x Width 895 mm x Depth 1810 mm - Test chamber volume: approx. 335 liters - Refrigerants: R449A & R23 - Weight: approx. 470 kg For your safety as a buyer, the following procedures are carried out on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. New charge with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, all chambers undergo a documented test run Condition: Used Scope of delivery: (see photos) (Subject to technical changes and errors. All specifications are non-binding!) We are happy to answer further questions by phone.

Condition: good (used), Hardness tester functional Dsdpfx Aeydlf Sjf Djkh

Condition: used, SPECTRO SPECTRO MAXx / LMM04 Description: For sale is an optical emission spectrometer SPECTRO MAXx, designed for professional metal and alloy analysis. The instrument is suitable for rapid and precise determination of the chemical composition of metals such as steel, cast iron, and various non-ferrous alloys. This is a proven industrial device, commonly used in foundries, laboratories, and for quality assurance. Device and Maintenance Information: - The device has been covered by a maintenance contract and maintained professionally on a regular basis. Dodpfx Afeybcfks Dskh - Several programs have been calibrated annually. - Last maintenance: 22.12.2023 - Operates without a vacuum pump – flushing is performed exclusively with argon. Regularly calibrated programs: - Fe-10, Fe-15, Fe-30 - Al-10, Al-20 - Cu-20 Overview of installed programs: - Fe-01-M / Fe-10 – low alloy steel - Fe-01-M / Fe-30 – Cr / CrNi steel - Fe-15-M / Fe-15 – free-cutting steel - Al-01-M / Al-10 – pure aluminum - Al-01-M / Al-20 – AlSi alloy - Cu-01-M / Cu-20 – CuZn alloy Technical Data: Device Details: - Device type: Optical Emission Spectrometer (OES) - Manufacturer: SPECTRO / AMETEK - Model: SPECTRO MAXx - Construction: Benchtop unit Electrical Data: - Power supply: 115 / 230 V AC - Frequency: 50 / 60 Hz - Power consumption (operation): approx. 400 VA - Power consumption (standby): approx. 180 VA - Fuse: 16 A (slow-blow) Gas Supply: - Operating gas: Argon (Ar) - Argon purity: min. 4.8 (99.998%) - Inlet pressure: approx. 7 bar Argon Consumption: - Stand-by: approx. 6 l/h - Continuous operation: approx. 23 l/h - Analysis operation: approx. 200 l/h Environmental Conditions: - Operating temperature: +10 °C to +30 °C - Relative humidity: 20–80%, non-condensing Dimensions & Weight: - Size (W × D × H): approx. 600 × 740 × 460 mm - Weight: approx. 60 kg Important Note: The table shown in the photos is not included in the sale. Condition: Used Scope of delivery (see images): - SPECTRO MAXx spectrometer - PC with monitor, keyboard, and mouse - Argon unit - Original manuals and software media Subject to change and errors in technical data. For further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS Type: CSR-60/810/S Temperature & Climate Air Conditioning Unit, Air-Cooled CTS Climate Test System CSR-60/810/S | –60°C to +170°C 39.6 kW | Test Chamber 1200 L Description: For sale is a professional climate and temperature testing system manufactured by CTS GmbH, comprising a conditioning unit type CSR-60/810/S and an external test chamber (1200 liters). The system is ideally suited for industrial, R&D, and laboratory applications, e.g., for automotive, electronics, component, and material testing. It enables precise temperature and climate simulations across an extremely wide operating range. This is a professional climate and temperature conditioning system from CTS GmbH, including: • Conditioning unit (CSR-60/810/S) • External test chamber (1200 L chamber) The system is designed to supply external test rooms or chambers with precisely controlled temperature and humidity. Typical applications include industrial, automotive, electronics, material, and component testing (environmental simulation, stress screening, endurance testing). Technical Data (from nameplate & manual) General: Manufacturer: CTS GmbH, Hechingen Type: CSR-60/810/S Year of manufacture: 07/2019 Temperature & Climate Temperature range: –60°C to +170°C Humidity range: 10% to 80% RH Dew point range: +5°C to +74°C Electrical Data: Rated voltage: 400 V / 3-phase / N / PE / 50 Hz Rated power: 39.6 kW Rated current: 64.9 A Recommended fuse protection: 80 A slow-blow Connection type: Hardwired Refrigeration System Refrigerants: Pre-cooling stage: R452A (17.0 kg) Cooling stage: R23 (5.3 kg) Compressor: Bitzer (cascade system) Protection class: Conditioning unit: IP54 Test chamber: IP22 Dimensions & Weight: Conditioning unit: Dimensions (W x D x H): approx. 1,200 × 1,100 × 2,200 mm Weight: approx. 1,200–1,500 kg 1200 L Test Chamber: Dimensions (W x D x H): approx. 1,600 × 1,400 × 1,600 mm Weight: approx. 600–800 kg Total system weight: approx. 1.8–2.3 t Buyer Safety Information! The following steps are always carried out on our offered chambers before sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful check, the chambers undergo a documented test run. Condition: used Dkodoya Ev Nepfx Af Deh Scope of delivery: (see pictures) (subject to change and errors in technical data and specifications!) Additional questions can gladly be answered over the phone.

Condition: excellent (used), CTS CW‑60/5.5 – Water-Cooled Climatic Test Chamber The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for temperature and humidity testing of multiple test specimens simultaneously. Device Description: This climatic test cell enables you to evaluate the function or material properties of test items under the influence of temperature and humidity. Efficient air circulation with a high recirculation rate ensures optimal environmental transfer to the test samples. The air treatment section is positioned at the rear of the chamber interior. The refrigeration units are accessible in a separate frame located behind the device. The control system is housed in a separate control cabinet, with the control panel integrated into the cabinet door. For dehumidification, the test chamber features a self-regenerating compressed air dryer. A blower system allows the chamber to be purged with fresh air as needed. Technical Performance Data: Dkodjx Eabpspfx Af Dsh Temperature Testing: - Temperature range: -60°C to +100°C - Temporal temperature deviation: ±0.5 to 1 K - Rate of temperature change (linear, with test item and thermal radiation, measured at supply air): - Heating: 2 K/min from -40°C to +85°C - Cooling: 2 K/min from +85°C to -40°C Climatic Testing: - Temperature range: +10°C to +90°C - Humidity range: 10% to 95% relative humidity - Dew point range: +5°C to +89°C - Temporal temperature deviation: ±0.5 K - Temporal humidity deviation: ±1% to ±3% r.h. Technical data is based on an ambient temperature of +25°C, nominal voltage 400 V, without samples, without radiation, and without additional equipment. Dimensions: - Internal dimensions (test chamber/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm - External dimensions: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection class: IP 54 Technical Configuration: - Cooling unit: Water-cooled, low-noise, semi-hermetic, infinitely variable power regulation via electronic monitoring and control system, environmentally friendly refrigerants R23 / R404A Notes: - Inspection by appointment possible (46325 Borken) - Shipping via freight forwarder possible – costs and arrangements upon request - Scope of delivery: (See image) (Specifications subject to change and errors excepted!) We will be happy to answer additional questions by phone.

Condition: excellent (used), CTS CW-60/5.5 – Water-cooled Climate Test Chamber The CW-60/5.5 by CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Device Description: This climate test chamber allows you to evaluate the performance or material properties of a test item under the influence of temperature and humidity. Efficient air circulation with a high recirculation rate ensures optimal temperature and humidity transfer to the test specimen. The air treatment compartment is located at the rear of the interior chamber. The system units are housed in a separate frame behind the chamber and are easily accessible. The control system is installed in a separate control cabinet, with the operator panel integrated into the cabinet door. For humidity control, the chamber is equipped with a self-regenerating compressed air dryer. The test chamber can be flushed with fresh air via a blower. Technical Specifications: Temperature Tests: Dkodpfxsx Eaxbj Af Dsh - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear, with specimen and radiant heat measured in supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climate Tests: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point area: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 – ±3 % RH over time The technical data apply to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimen, radiant heat, or additional features. Dimensions: Interior (Test Chamber/Usable Space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2300 mm, Width: 1600 mm, Depth: 1550 mm External dimensions: - Height: 2800 mm, Width: 2250 mm, Depth: 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (including 5 sockets) - Rated current: 86.0 A - Protection class: IP 54 Technical Features: - Refrigeration unit: water-cooled, low noise, semi-hermetic, with stepless capacity adjustment via electronic monitoring and control system - Environmentally-friendly refrigerants: R 23 / R 404 A Notes: - Inspection available by appointment (46325 Borken) - Shipping by freight carrier possible – costs and arrangements upon request - Scope of delivery: (see picture) (Subject to technical modifications and errors in specifications!) If you have further questions, we will be happy to answer them by phone.

Condition: excellent (used), CTS CW-60/5.5 – Water-cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in and drive-in climatic chamber designed for simultaneous temperature and humidity testing on multiple test specimens. Device Description The climate test chamber allows for functionality or material property testing of a test item under the influence of temperature and humidity. Efficient air circulation with a correspondingly high level of recirculating air volume ensures excellent transfer to the test item. The air treatment compartment is located at the rear of the test chamber. The aggregates are positioned behind the unit in a separate frame for easy access. The control system is integrated into a separate control cabinet. The control panel is mounted in the door of the control cabinet. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The test chamber can also be purged with fresh air via an internal blower. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate, linear with specimen and heat radiation, measured in supply air: - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: Djdsx D Abpepfx Af Dokh - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% rH - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 – ±3% rH over time Technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test item, without external radiation and without additional devices. Dimensions: Internal dimensions (test space/usable volume): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External dimensions: Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A - Protection rating: IP 54 Technical Execution: Refrigeration unit: Water-cooled, low noise, semi-hermetic, infinitely variable capacity adjustment via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Notes: Inspection by appointment possible (46325 Borken) Shipping by forwarding agent possible – Costs & organization upon request Scope of delivery: (see photo) (Subject to change and possible errors in the technical data; information provided without liability!) For further questions, we are happy to assist you via telephone.

Condition: excellent (used), Primus Engineering Type: DST 350 This test device was designed to carry out IP protection class tests “dust” according to e.g. DIN 40050 Part 9 and DIN EN 60529. The test device is intended for testing technical components under the influence of dust and negative pressure within the limits specified in the technical data. Dedpjrt U Nuofx Af Dskh Operation / HMI Control panel with screen and buttons Manual controllers Stored test sequences Integrated vacuum circuit with flow measurement Technical data: Total electrical output: Max. 5 KW Connection voltage: 400V/50HZ 3-Ν/ΡΕ (16AEEC socket) Dimensions: Width approx. 920 mm Depth approx. 710 mm Height approx. 1,770 mm Dimensions of test chamber: Width approx. 700 mm Depth approx. 650 mm Height approx. 770 mm Volume approx. 350 I Mass: approx. 200 kg Vacuum: 0 to -100 mbar Suction air flow: 0 to approx. 5 l/min Working climate range: Temperature: +12 °C to +30 °C Humidity: 25% rel. H. to 75% rel. F., non-condensing Protection class tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: Dust-protected ΙΡ5Χ and IP5KX Dust-tight ΙΡ6Χ and IP6KX with and without vacuum Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Netzsch Model: Netzsch TG 209 F3 Tarsus NETZSCH Proteus® Software for Thermal Analysis included. Description: For sale is a NETZSCH TG 209 F3 Tarsus thermogravimetric analyzer (TGA) manufactured in Germany. This device is used in laboratories, research, development, and quality control for thermogravimetric analysis. Thermogravimetry measures the change in mass of a sample as a function of temperature and time. This method serves, among other purposes, for assessing thermal stability, decomposition processes, moisture and solvent content, as well as filler and ash fractions. The TG 209 F3 Tarsus is a robust, high-precision instrument designed for industrial and research applications—not a hobby or DIY device. Typical fields of application: - Plastics and polymer analysis - Chemical & pharmaceutical industry - Materials research - Quality control - Research & development Software / Data Analysis: The scope of delivery includes NETZSCH Proteus® software for thermal analysis. The Proteus® software is used for device control, data acquisition, and evaluation of thermogravimetric measurements (TGA). Key features include: - Control of measurement programs (temperature profiles, heating rates, dwell times) - Recording of mass changes as a function of temperature and time - Graphical representation of measurement curves (TG, DTG) Dkjdoyamzaopfx Af Doh - Evaluation of decomposition stages, mass losses, and residual masses - Data export for documentation and further processing The software package includes (see photos): - Original NETZSCH Proteus® installation media - Printed software and device documentation - NETZSCH USB dongle (hardware license key) System requirements (according to documentation): - Microsoft Windows 7 / 8.1 / 10 (Professional or Enterprise) Technical specifications (approximate values): Manufacturer: NETZSCH (Made in Germany) Model: TG 209 F3 Tarsus Measurement principle: Thermogravimetric Analysis (TGA) Temperature range: Ambient to approx. 1000 °C Heating rate: approx. 0.1 – 50 K/min Max. sample weight: approx. 1 g Balance resolution: up to approx. 0.1 μg Gas operation: Air / Inert gas (e.g., nitrogen) Mains voltage: 230 V AC / 50–60 Hz (switchable to 115 V) Power consumption: approx. 1.0 – 1.2 kW Dimensions (W×D×H): approx. 45 × 55 × 35 cm Weight: approx. 40 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See photo) (Specifications are subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Condition: excellent (used), For sale: Professional, portable vibration calibrator from the renowned manufacturer PCB Piezotronics. Model: 394C06 Serial number: LW19236 Made in: USA The calibrator is designed for rapid verification and calibration of accelerometers in industrial, laboratory, and automotive (NVH) applications. — Technical and visual condition The device is in very good condition and well-maintained. Manufacturer's seal is intact (VOID IF SEAL DAMAGED). Dsdpfx Afeyc Igve Dokh Normal, minimal signs of use. The equipment comes from a professional measurement environment. — Features and characteristics • Portable vibration calibrator • RMS / PEAK mode • CAL adjustment (+ / -) • Stable reference signal for sensor verification • Battery powered – ideal for field work • High repeatability and measurement accuracy — Applications • Accelerometer calibration • NVH systems (Noise, Vibration, Harshness) • Industry, automotive, laboratories • Maintenance, quality control — Included in the set • PCB Piezotronics 394C06 calibrator • Original transport case • Protective cover • Adapters / mounting accessories (as shown in the photos)

Condition: excellent (used), Netzsch Type: DSC 200 F3 Maia® Measuring Device NETZSCH DSC 200 F3 Maia® with Intracooler 40 Differential Scanning Calorimeter incl. accessories Description / Scope of Functions A DSC is used for the thermal analysis of materials. It measures the heat flow that occurs in a sample during physical or chemical processes when it is heated or cooled in a controlled manner. The device enables the investigation of the following material properties, among others: - Melting and solidification temperatures - Glass transition temperatures (Tg) - Crystallization - Phase transitions - Reaction enthalpy - Heat capacity - Purity determination of substances Typical fields of application: - Materials research & development - Plastic and polymer analysis - Metal and alloy analysis - Chemistry, pharmaceuticals, ceramics - Quality assurance & laboratory analytics The Intracooler 40 enables active cooling below room temperature without the need for liquid nitrogen and significantly extends the temperature range. Scope of delivery (as pictured): - NETZSCH DSC 200 F3 Maia® measuring device - NETZSCH Intracooler 40 - Original measuring and handling tools - Calibration and reference materials (indium, tin, bismuth, zinc, aluminum, silver – approx. 400 mg each) - Several original packs of DSC crucibles (aluminum, 25 µl) - Original transport and storage boxes - Comprehensive NETZSCH original documentation (user manuals, instrument manuals, software manuals) - NETZSCH Proteus® software incl. data carrier and USB dongle Technical data (excerpt) DSC 200 F3 Maia® Djdeyaatpepfx Af Dekh Power supply: 230 V / 50 Hz Power consumption: approx. 500–800 W Temperature range (with Intracooler 40): approx. -40 °C to +600 °C (depending on configuration) Measuring principle: Differential Scanning Calorimetry (DSC) Intracooler 40 Power supply: 230 V / 50 Hz Current consumption: 2 A Refrigerant: R507 Protection class: IP21 Max operating pressure: 24 bar Dimensions & weight (approx.): DSC 200 F3 Maia®: Dimensions (W × D × H): approx. 60 × 45 × 25 cm; Weight: approx. 35–40 kg Intracooler 40: Dimensions (W × D × H): approx. 30 × 40 × 50 cm; Weight: approx. 30 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) (Specifications and technical details subject to change and errors reserved!) If you have further questions, we would be happy to answer them by phone.

Condition: used, Amboss + Langbein Industrial Drying Oven Amboss + Langbein WTS 20 3B – 80°C – 400 V – 5 kW For sale is an industrial drying oven / heat drying cabinet from the manufacturer Amboss + Langbein, model WTS 20 3B. This unit is ideally suited for drying, heating, and tempering workpieces, components, or materials in workshop, industrial, or laboratory environments. The drying oven features digital temperature control, a safety thermostat, and a robust industrial design with multiple stainless steel shelves. Thanks to its castors, the unit is easily movable within the facility. Technical specifications: Manufacturer: Amboss + Langbein Model: WTS 20 3B Year of manufacture: 04/2010 Operating voltage: 400 V Frequency: 50 Hz Dkedpex Uz Rtjfx Af Djh Power: 5 kW Max. temperature: approx. 80°C Temperature control: digital Safety thermostat included CE marking Dimensions / Weight (approx.): Height: 170–180 cm Width: 80–90 cm Depth: 70–80 cm Weight: 180–220 kg Condition: used Scope of delivery: (See photo) (Specifications and technical data subject to change and errors!) For further questions, feel free to contact us by phone.

Year of construction: 1985, condition: repair required (used), functionality: limited functionality, Schenk-Trebel Materials Testing Machine Type RME 250 kN • Load frame and drive by Schenk Trebel, year of construction 1985, total height approx. 3.3 m; traverse stroke approx. 2 m • Modernization around the end of 2003: equipped with the ZwickRoell "testControl" control electronics • Retrofit in 2010: MultiXtens universal extensometer system by ZwickRoell, with swiveling device and two pairs of measuring sensors (photo), and new testControl module • Note: The testControl module functions together with the current "testXpert III" software from ZwickRoell (software is not included in this offer) • Temperature chamber (photo) insertable into the test space of the machine, built in 2006 by RS-Simulatoren Prüf- & Messtechnik, heatable up to approx. 200°C; coolable down to approx. –40°C with liquid nitrogen • Load cells: 250 kN and 50 kN (currently installed, see machine photo); additionally: 5 kN, 1 kN, and 500 N (photo) • 2 wedge specimen grips (photo) Condition of the machine The machine was in use for testing until early 2026. The 50 kN load cell and the traverse displacement sensor were used (both sensors last calibrated on 06.05.2024 incl. standard inspection). A defect in the servo amplifier for the drive (component in the testControl module) has resulted, since autumn 2025, in frequent connection losses to the software and halt of the drive until hardware/software reboot. The servo amplifier or the entire testControl module need to be replaced (cost details available from the supplier). The 250 kN load cell was last calibrated on 11.02.2021, but has not been used since then. Dedeyhb Rlepfx Af Dekh The other load cells, MultiXtens system, and temperature chamber have not been used or calibrated in recent years. The two hydraulic clamping units shown installed in the machine on the pictures will be removed and remain with the supplier.

Condition: excellent (used), Binder Model MKF 115 E3.1 Binder Climatic Test Chamber Model MKF 115 E3.1 Temperature range: -40 °C to +180 °C Humidity range: 10 % RH to 98 % RH Integrated 20 L water reservoir 4 potential-free relay contacts APT.line™ preheating chamber technology Programmable condensation protection for samples Heated viewing window with LED chamber illumination Humidity control with capacitive humidity sensor and steam humidification BINDER Multi Management Software APT-COM™ Basic Edition Fault diagnosis system with visual and audible alarms Intuitive touchscreen controller with time-segment and real-time programming Internal data logger, measurement data exportable in open format via USB 50 mm access port with silicone stopper, left side Class 2 temperature safety limiter (DIN 12880) with visual alarm Dedpfex Ux Ivox Af Dskh 4 casters (2 with locking brakes) Computer interface: Ethernet 230 V outlet on right side control panel Adjustable ramp function Integrated strip chart recorder Real-time clock Door heating Alarm notification on low water level in the fresh water tank 2 stainless steel shelves Hose burst protection, incl. water supply and drain up to 1m height Interior chamber made of stainless steel Cooling by compression refrigeration unit TECHNICAL DATA: Cabinet dimensions: Width 1000 mm Height 1725 mm incl. feet/castors Depth 865 mm incl. lugs &/connections Interior dimensions: Width 600 mm Height 480 mm Depth 400 mm Volume: Chamber volume 115 liters Net device weight (empty) 280 kg Max. total load 60 kg Max. load per shelf 30 kg Performance data Temperature: Temperature range -40...180°C Temporal temperature deviation 0.1...0.6 ± K Spatial temperature deviation 0.1...1.3 ± K Average heat-up rate according to IEC 60068-3-5: 5.5 K/min Average cool-down rate according to IEC 60068-3-5: 4.5 K/min Max. heat compensation 2500 W Climate performance data: Temperature range 10...95°C Humidity range 10...98 % RH Temporal temperature deviation depending on setpoint 0.1...1.3 ± K Max. heat compensation 400 W Electrical data: Rated voltage 400V 3N~ ±10% 50Hz Rated power 4.5 kW 7.5 A Energy consumption at 25°C / 60% RH 1.25 kW Fittings: Number of shelves 4/4 (std./max.) Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors!) If you have further questions, we would be happy to answer them by phone.

Condition: excellent (used), Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Dedpfox Up Igsx Af Djkh Zwick / Roell Materials Testing Machine 20 kN Tensile & Compression Testing testXpert III For sale is a high-quality Zwick / Roell materials testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. Control is via PC using Zwick/Roell testXpert III software (data carrier & documentation included). Technical Data: Rated test force: 20 kN Test direction: tensile & compression Power supply: 230 V / 50–60 Hz / single-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical data (according to documentation & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: tensile & compression Max. test frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight: Total height: approx. 1,545 – 2,114 mm (depending on crosshead position) Total width: approx. 856 mm Total depth: approx. 650 mm Working area width: 440 mm Weight: approx. 150 kg (base unit) approx. 180 kg with typical configuration Electrical Data Power supply: 230 V AC Phases: single-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Plug: Schuko (CEE 7) Measuring & Control Electronics: Internal data acquisition: 500 Hz Data transmission to PC: adjustable 10–100 Hz Interface: RS232 (COM) Electronics housing protection class: IP32 Important note: 'The table shown in the photos is not included in the sale.' Condition: used Scope of delivery: (see picture) - Zwick / Roell materials testing machine (20 kN) - Electronics unit - PC workstation (monitor, PC – please see photos for condition) - 2 measurement modules (Delock units) - Zwick/Roell testXpert III software (data carrier) - Original operating and technical documentation - Various connection and interface cables (Specifications are subject to change and errors excepted!) If you have any questions, we will be pleased to assist you by phone.

Condition: excellent (used), Binder Model: FP 115 Binder Drying Oven with Forced Air Circulation Description: For sale is a high-quality BINDER FP 115 drying oven / heating cabinet from a laboratory inventory. Ideally suited for laboratory, industrial, workshop, research, or educational use. The control is digital, and the temperature remains stable throughout operation. The interior is made of metal and equipped with multiple pull-out shelves. Maximum load: 11 – 50 kg Technical Data (as per nameplate): Max. temperature: 300 °C (572 °F) Rated power: 1.60 kW Connection: 230 V / 1~ Current consumption: 7.0 A Frequency: 50/60 Hz Protection class: IP20 Temperature safety: DIN 12880, Class 2.0 Internal volume: approx. 115 liters Internal width (incubators...): 600 mm Internal depth (incubators...): 410 mm Internal height (incubators...): 480 mm External width (incubators...): 835 mm External depth (incubators...): 645 mm Dkjdpfx Afex Uph Ho Doh External height (incubators...): 705 mm Important note: "The table shown in the photos is not included in the sale." Item weight: 62 kg Condition: used Scope of delivery: (See photo) (Specifications and details subject to change and error!) If you have further questions, please feel free to contact us by phone.