Used Hydraulic presses double column / Four column presses for sale (311)

Condition: new, stroke lenght (max.): max. 400table height: Fußboden bis Tischplatte Oberkante 900daylight: 600speed: Vorlauf 120 mm , Druck 13 - 4 mm, Rücklauf 170/mm/formance of pump: 103 Lt./min (REXROTH - Axialkolbenpumpe)motor: 22 kw - 1500d / minmessurements (LxWxH): 2000x3200x4300weight approx.: 10.000oil filling: 700 Capacity: 250 tons (at 245 BAR) Operation : Via key switch Manual / set-up mode using two hands without light sensor Automatic via two-hand operation at full speed with light sensor Main cylinder: Ø 350 mm Auxiliary cylinder: 2 pcs. Ø 80 x 60 mm Motor: 22 kW. – 45 hp. Pump: 103 lt./min REXROTH - axial piston pump Speed: Forward 120mm Pressure 13-4mm return 170mm./sec. Clear width: 1100 mm Table top: 1000x1000 mm/ with T-slots Ram plate: 1000 x 1000 mm./ with T-slots & spring welds Installation height: 600 mm (max. distance between table & ram plate) Stroke length: 400mm max Table height: 900 mm floor to table top edge Hydraulics: Block & Valves ( REXROTH ) (Hydraulic Accessory on Top of Press) priming valve Hydraulic & mechanical ram protection Pressure setting via PLC (min. pressure 35 ton) Speed setting via PLC. Pressure hold valve for 600 sec. Air cooler (temperature control adjustable via screen) Automatic lubrication for guides (adjustable via screen) Side of the working area closed with sheet metal wall Guide rails for parallelism Auxiliary engine: 5.5 kW+ 2.2 kW Auxiliary pump: 22cc.+5.5cc Safety rails around the hydraulics and side ladder Oil tank: 800 liters Oil quantity: approx. 700 liters Control: SIEMENS S7 - 1200 Cgjb E Ilusgta Rcjgot main switch box Giftable control panel Soft starter for engine Safety PLC: Sick PLC screen 9'' Siemens Two hand operation (movable) Ruler measuring stick for setting the stroke length 450 mm. - NOVOTECHNOLOGY Light sensor for the front and back of the work area - SICK 900 + 150mm. SECOME & Ethernet connection for remote maintenance - Siemens Working space lighting 2 compartment 8 free inputs and outputs on the PLC Automatic print refill if lost Operating instructions in German hydraulic plans control plans

Condition: new, Year of construction: 2025, total height: 4,000 mm, total width: 1,415 mm, total length: 1,415 mm, pressing force: 300 t, table width: 1,000 mm, table length: 1,000 mm, table height above floor: 1,300 mm, overall weight: 18,000 kg, retraction force: 100 t, operating pressure: 250 bar, STANDARD FEATURES - Steel construction body and parts with stress / welding tension relieved by vibration method - 8-surface slide / bearing for high precision and long-lasting use - PLC control and touch panel - Argon application for fixing elements and steel drawn pipes - EN ISO 15614-1/2017 welding application certificate accredited by TÜRK-AK and approved by WPQR and WPS. (Welding applications are supervised by "welding coordination engineers" certified according to EN ISO 14731) - Parallelism and perpendicularity tolerances are applied according to ISO AND DIN Norms. (≤ 120 microns/meter) - PARKER / REXROTH hydraulic unit - SIEMENS / SCHNEIDER electrical consumables - Automatic central lubrication system - Two-hand control - Cooling system TECHNICAL SPECIFICATIONS MODEL CHKSP 300/100 PRESSURE (TON) 300/100 STROKE (MM) 800 POT CYLINDER STROKE (MM) 250 TABLE - RAM DISTANCE (MM) 900 TABLE SIZE (MM) 1000X1000 RAM SIZE (MM) 1000X1000 PRESS DEPTH (MM) 1415 PRESS WIDTH (MM) 1415 Cgeb E Ilevm U Uqsugst TABLE DIMENSION FROM FLOOR (MM) 1300 PRESS HEIGHT (MM) 4000 MAIN CYLINDER DIAMETER (MM) 390 POT CYLINDER DIAMETER (MM) 230 ENGINE POWER (KW) 30 PRESS WEIGHT (KG) 18000 COUNTRY OF ORIGIN: TURKEY WARRANTY PERIOD: 24 MONTHS DELIVERY PERIOD: 4 (FOUR) MONTHS DEPENDING ON ORDER PRODUCTION FROM 40 TONS TO 300 TONS IS AVAILABLE.

Condition: used, Double column press - Hydraulic Manufacturer REPKON Model 2000/800 kN Condition used description Pressure 200 t Cob E Ilsudb Hceugjgt Column width 1600 mm ram stroke - max. 600 mm Installation height 900 mm Table width 1600 mm Table depth 1300 mm Table height 1060 mm ram surface 1600 x 1300 mm T-slots Din 650 / 22H12 Rapid traverse 400 mm/s Return speed 325 mm/s Pressing speed 42 mm/s at 40% mm/sec Pressing speed 20 mm/s at 100% mm/sec Die cushion pressure 800 kN Die cushion stroke 150 mm Die cushion speed to 68/ from 225 mm/sec Conversion year: 2001

Condition: good (used), Year of construction: 1972, pressing force: 160 t, Engine power 20 hp Ceb E Iluovi Iiaegsgt

Condition: like new (used), Year of construction: 2020, Functionality: fully functional, machine/vehicle number: 942412, TECHNICAL DETAILS Ceb E Iluetu Hz Ujgjgt Pressing force: 600 kN/298 bar Press cylinder: stroke 400 mm Piston diameter: 160 mm Width between the columns: 1200 mm Height of base plate: 900 mm MACHINE DETAILS Weight 2500 kg

Condition: refurbished (used), Year of construction: 1995, Functionality: fully functional, machine/vehicle number: 4290, total height: 2,750 mm, installation height: 500 mm, pressing force: 30 t, table width: 440 mm, table length: 320 mm, ram stroke: 300 mm, overhauled Schoen double column press year 1997/2024 Pressing force 300 kN Installation height 500 mm stroke: 300 mm Table: W x D 440 x 320 mm Cob E Iju Hyx Selugjgt Machine will be overhauled: - new control - new light barrier - revision of the hydraulics

Condition: new, stroke lenght (max.): max. 400table height: Fußboden bis Tischplatte Oberkante 850daylight: 600speed: Vorlauf 120 mm , Druck 13 - 4 mm, Rücklauf 170/mm/formance of pump: 65 Lt./min (REXROTH - Axialkolbenpumpe)motor: 15 kw - 1500d / minmessurements (LxWxH): 2.100 x 2.400 x 4.300weight approx.: 11.000 Capacity: 1500kN. (150 ton - at 245 BAR) Operating selection: Via key switch Manual / set-up via two-hand operation without light sensor fuse on front side (rear side always active) Automatic via two-hand operation at full speed (with active light sensor fuse) Main cylinder: Ø 270mm. Auxiliary cylinder: 2 pcs. Ø 70 x 50mm. Motor: 15kw. - 1500d/min. (IE-3) Pump: 45cc. - 65Lt./min.   REXROTH - axial piston pump Speed: flow 120mm. - Pressure: 13 - 4mm. - Return 170mm./sec. Clearance: 1300mm. Table top: 1200 x 800 x 90mm. - with T - grooves ram plate: 1200 x 800 x 600mm. - with T - grooves & ribbing Installation height: 600mm. (max. distance between table & ram plate) Stroke length: max. 400mm. Table height: 850mm. (Floor to table top upper edge) ----- Hydraulics: (Hydraulic accessories on top of the press) Kontrol Block & Valves (REXROTH Proportional Valves) Prefill valve (NG.125) 8 way guide Hydraulic ram safety device Mechanical ram safety device for TDC position Csb E Ilempfwdsugegt Pressure adjustment via PLC. Speed adjustment via PLC. Pressure stop valve for 600 sec. Air cooler Automatic lubrication for guides Auxiliary motor Auxiliary pump Control system: Main control box (mounted on the side of the press frame) Pivoting control panel SIEMENS S7 - 1200   KTP. 9 SIEMENS screen (language selection DE.- ENG.) Safety PLC. (SICK) Light sensor for front & back of work area (SICK 750 + 150mm.) Soft starter Two hand operation (Movable) SECOMEA Ethernet connection Ruler for setting the stroke length (450mm. - NOVOTECHNIK 16BIT) Workspace lighting (2-fold IP-66)   8 free ON & OFF outputs on the PLC. for external connections ----- Protective railing around the hydraulics Lateral ladder ----- Documentation: Operating manual DEUTSCH(1 fold paper & 1 fold USB.) Hydraulics & control diagrams Parts lists CE. Certificate Standard :EN.16092/1/3 ----- Total dimensions: approx. 2400 x 2100 x 4100mm Total weight: approx. 11.000kg. Painting: frame RAL 7035 light grey, railing & hydraulics RAL 7016 anthracite grey. -----

Condition: new, Year of construction: 2024, Capacity: 300 ton Working Area: 1600 x 2100mm. Cgsb E Isttrhgjlugjt Stroke Length: 500mm. Installation Height ( Daylight ) : 600mm. Main Motor: 22kw. Main Pump: 87lt. Distance Between Columns: 2100mm. Table Height: 900mm. Closing Height: 100mm. Forward Speed: 9.8 mm./s. Return Speed: 21.5 mm./s. Overall Dimensions: 3300 x 3000 x 3000mm. Total Weight: 16000kg. -- Accessories: Hydraulics: Rexroth Control: Siemens S7-1200 BEIJER 7’’ Screen Control cabinet mounted on the side wall of the bridge Swiveling control panel Pressure adjustable via screen (50 – 300 tons) Speed adjustable via throttle valve Cylinder chrome-plated Remote control (with cable) Stroke length adjustable via distance sensors 400 V 50 HZ 3 phase Rotary safety for cylinder Cylinder movable sideways via drive motor Bridge movable via drive motor Light curtain safety for bridge area (Datalogic) -- 24/7 CUSTOMER SERVICE - from manufacturer to customer

Year of construction: 1978, Condition: used, pressure 40 t distance between columns 600 mm stroke 150 mm table surface area 600x410 mm ram surface 220x130 mm table height 850 mm Csb E Ilujq Rhkwegsgt weight of the machine ca. 2,5 t

Condition: new, Year of construction: 2024, Functionality: fully functional, installation height: 500 mm, pressing force: 160 t, table width: 1,250 mm, table length: 800 mm, ram stroke: 300 mm, EXNER EX SL 160 double column press NEW Machine is under construction Pressing force 1600 kN Installation height: 500 mm stroke: 300 mm Table width: 1250 mm Table depth: 800 mm Csbouw S A Ds E Ilugsgt mech. depth stop

Condition: new, column width: 2000 x 1000retracting speed: 150weight approx.: 35.000stroke: 800total power requirements: 30daylight: 1000rapid traverse: 120pressure: 500: 2500 x 1500working speed: 12messurements (LxWxH): 2500x2700x5400 Cgjb E Iljd Aca Asugot

Condition: new, Year of construction: 2024, Main Motor: 22 kW (IE-3) Main Pump: 71 cc = 103 L/min, REXROTH axial piston pump Speed: Forward: 170 mm/s – Pressure: 18 – 5 mm – Return: 200 mm/s Installation Height: 900 mm Stroke Length: 600 mm Table Plate: 1000 x 1200 x 120 mm / with T-slots Ram Plate: 1000 x 1200 x 800 mm / with T-slots -- HYDRAULICS Accessories : Complete hydraulic accessories on top of the press. Block & Valves: REXROTH Pressure adjustment via PLC for ram & drawing cushion Speed adjustment via PLC for ram & drawing cushion Cgsb Eottra Do Ilugot Sides of the work area enclosed with sheet metal wall 8-fold guideways for parallelism Air & circulation cooler (Temperature regulation adjustable via screen) Hydraulic ram safety Mechanical ram safety for top dead center position Automatic lubrication for guides (adjustable via screen) -- Drawing Cushion: Capacity: 100 TON (at 250 Bar) Speed: Forward: 40 mm/s – Return: 70 mm/s Stroke Length: 400 mm Deep Drawing Table Area: 800 x 700 mm Deep Drawing Cylinder Holding Capacity: 10-100 Ton -- CONTROL Accessories : SIEMENS S7-1200 Main control cabinet Foldable control panel SECOMEA – ETERNET connection for remote maintenance – SIEMENS Safety PLC: SICK Light sensors on the front & back of the work area (SICK – 900 + 300 mm) Movable two-hand operation Linear scale: 650 + 450 mm NOVOTECHNIK for ram & drawing cushion PLC screen - SIEMENS 9" 2-fold workspace lighting of the work area 16 free I/O ports on the PLC. -- The press is manufactured according to CE standards (automation panel, hydraulic control, and safety standards). -- Table Height: 950 mm (floor to top edge of the table plate) Overall Dimensions: 2700 x 2100 x 4400 mm Total Weight: approx. 13,500 kg Warranty: 12 months -- 24/7 Customer Service - from the manufacturer directly to the customer

Year of construction: 1978, Condition: used, pressure 25 t Cjb E Ilujlp U Arogegt distance between columns 580 mm stroke 150 mm dayligth 370 mm table surface area 560x400 mm ram surface 400x350 mm hole in the table 80 mm weight of the machine ca. 2,5 t dimensions of the machine ca. 1500x500x2500 m

Condition: new, Year of construction: 2024, installation height: 400 mm, throat depth: 230 mm, pressing force: 40 t, table width: 700 mm, table length: 450 mm, ram stroke: 250 mm, EXNER hydraulic single-column press NEW Series EEX SL 40 - Pressing force: 400 kN mech. depth stop Control: Siemens S7 - 1500 Installation height: 400 mm Cob Ejt D Ah Ao Ilugegt Stroke: 250 mm Tables: 700 x 450 mm

Year of construction: 1990, Condition: used, pressure 250 t distance between columns 1100 mm stroke 400 mm dayligth 600 mm table surface area 1000x800 mm ram surface 1000x800 mm table height 950 mm total power requirement 65 kW weight of the machine ca. 25 t Cgjb Eslp U I Ee Ilugst dimensions of the machine ca. BxTxH 0000x0000x3900mm m

Condition: new, Year of construction: 2024, Functionality: fully functional, installation height: 400 mm, pressing force: 40 t, table width: 700 mm, table length: 450 mm, ram stroke: 250 mm, Equipment: safety light barrier, EXNER hydraulic double column press EX SLL 40 new machines year of construction 2024 pressing force: 400 kN Installation height: 400/450 mm stroke: 250 mm Cgsb E Ijuv Hm Ijlugst Table (width) 700 mm Table (depth) 450 mm

Year of construction: 1999, Condition: used, pressure 630 t passage width 1390 mm stroke 400 mm table surface area 1390x1250 mm total power requirement 75 kW Cgob E Ijlp U R Sjlugot weight of the machine ca. 36 t dimensions of the machine ca. BxTxH 3200x2800x4000 mm

Condition: used, Year of construction: 1995, Functionality: fully functional, pressing force: 250 t, table width: 1,600 mm, table length: 2,650 mm, overall weight: 55,000 kg, die cushion stroke: 235 mm, Hydraulic deep drawing press Wanzke GTA 250 year of construction 1995 used Technical data: Pressing force 2,500 kN Ceb Eoup Skwe Ilugegt ram stroke 600 mm ram speed working stroke 25 mm/s Die cushion 1,600 kN Die cushion stroke 235 mm Table clamping surface 2,650 x 1,600 mm Stroke limiting spindles 2 pcs. Damping cylinders 2 pcs. Drive power 75 kW Press dimensions approx. width 4,250 mm (without cladding) depth 2,000 mm height 5,150 mm Weight 55 to. Table: Holes for quills in the center of the press table. From there, the other holes holes have a distance of 150 mm to the right and left There is also a hole in the middle of the press table. The hole spacing is also 150 mm. A maximum of 15 quills are possible lengthwise and 7 widthwise. possible. Quill diameter: 30 mm

Year of construction: 1977, Condition: used, pressure 200 t distance between columns 500 mm stroke 150 mm ram surface 320 mm table surface area 470x400 mm weight of the machine ca. 12 t dimensions of the machine ca. 2000x2000x2700 mm Csb E Iluslp Uz Uogegt

Condition: used, Year of construction: 1992, Functionality: fully functional, installation height: 700 mm, pressing force: 250 t, table width: 1,250 mm, table length: 1,150 mm, ram stroke: 400 mm, die cushion stroke: 150 mm, Hydraulic double column press DUNKES HDS 250/10 Year of construction 1992 Technical data: Pressing force at 260 bar: 250 tons Rapid lowering speed: 365 mm/s Table clamping area approx.: 1150 x 1250 mm Ram clamping area approx.: 1150 x 1250 mm Die cushion area approx.: 800 x 1000 mm Die cushion pressing force (200 bar): 100t Die cushion stroke: 150mm Power requirement: 45 kw Installation height: 700 mm Csb E Ilujup Si Hogegt ram stroke: 400 mm Conversion of the control system to SIEMENS (in 2005) Machine height approx. 5,400 mm TP language currently Polish

Year of construction: 1979, Condition: used, pressure 160 t distance between columns 850 mm stroke 400 mm ram surface 800x700 mm Cgeb E Islp Uz Rolugst 300 mm pressure of ejector 20 t table surface area 800x700 mm total power requirement kW weight of the machine ca. 12 t dimensions of the machine ca. 1800x1800x4200 m

Condition: refurbished (used), Year of construction: 2024, machine/vehicle number: 2260, installation height: 280 mm, pressing force: 25 t, table width: 580 mm, table length: 320 mm, ram stroke: 100 mm, Schoen hydraulic double column press Year of manufacture 1978/2024 Machine is/will be generally overhauled - new control Cgebot Dzy Re E Ilugjt - New light barrier - Revision of the hydraulics Pressing force: 250 kN Installation height: 280 mm stroke: 100 mm Table width: 580 mm Table depth: 320 mm

Year of construction: 1978, Condition: used, pressure 25 t stroke 100 mm table surface area 440x320 mm ram surface 360x220 mm hole in the table 160x100 mm table height 900 mm tool hole in ram Ø 40 mm dayligth 280 mm weight of the machine ca. 1,5 t Cgeb Eelp U A Io Iluget dimensions of the machine ca. BxTxH 1500x1500x2100 mm

Condition: good (used), Year of construction: 2000, Functionality: fully functional, installation height: 400 mm, pressing force: 20 t, table width: 800 mm, table length: 500 mm, ram stroke: 150 mm, hydraulic double column press Schoen UTE/B20 year 2000 used control Siemens S 7 Cgeb E Iluet Dzpfjgst pressing force: 200 kN Installation height 400 mm stroke: 150 mm table width: 800 mm Table depth: 500 mm

Year of construction: 1991, Condition: used, pressure 100 t passage width 810 mm stroke 400 mm table surface area 1140x740 mm ram surface 1140x740 mm dayligth 670 mm weight of the machine ca. 8 t Cgeb E Islp U D Noluget dimensions of the machine ca. 1800x1800x3000 mm