Used Hydraulic presses double column / Four column presses for sale (311)

Condition: good (used), Year of construction: 2000, total height: 47,000 mm, total width: 27,000 mm, total length: 25,000 mm, table width: 1,000 mm, table length: 1,800 mm, overall weight: 43,000 kg, ram plate width: 600 mm, die cushion stroke: 200 mm, Siemens Simatic OP 27 control system Light barrier Sick Bo Ia Uetiwgijnxiewl Separate control cabinet Ritta Side passages Ground level installation

Condition: excellent (used), Year of construction: 2015, With a view to optimized and energy-saving drives in the vehicle industry, significantly higher demands are placed on the components of the drive system. Higher power transmission and higher torques combined with smaller size are the challenges. This development has increased the demand for cold-formed splines. With the Vertical Splines Press (VSP) Sack & Kiesselbach provides the customer with a solution that offers technological and also logistical advantages compared to conventional technologies (such as roller burnishing or broaching). The relatively small and very user-friendly press can be configured both manually and as an automated system. In addition to the splines press, the customer can also obtain the appropriate die system and process technology from a single source. 1 used Vertical Splines Press make Sack & Kiesselbach type VSP 50/30 Year 2015 Technical data: Pressing force 500KN ram stroke 450 mm Closing speed 200 mm/s pressing speed 5,5 mm/s opening speed 120 mm/s table dimension 500 x 400 mm installation height 1000mm width between columns 530 mm splines cylinder speed 3-9,5 mm/s Bwj Ijgtty Toa Unxisl Dimensions height 2900 mm width 3100 mm depth 1400 mm Drive power 8 KW Special equipment Digital measuring system Splines tool for internal splines

Condition: used, Double column hydraulic press ALPHA TEC -- ALPHATEC type RPS 5000 fabric. no. 300487 year of construction 2006 pressure force 500 ton. stand width front and rear 2520 mm table area 2500 x 2500 mm ram surface 2500 x 2500 mm ram stroke 600 mm installation height max. 600 mm Table height above floor approx. 900 mm tank capacity approx. 1000 liters ram retraction force approx. 22 ton. Feed speed adjustable 100-800 mm/s pressure build-up to 5000 kN approx. 0,7 sec. return stroke speed approx. 300 mm/s Motor power main motor 75 kW Motor power control pump 2,2 kW Mains connection 400 Volt, 50 Hz - 8-fold flat guide for the ram - Hydraulic ram locking at TDC - adjacent control cabinet (200 x 50 cm) - Electrical control SIEMENS SPS S7-314 - Operation via SIEMENS OP 170-B (5,7") Be Iaedzqptj Unxiewl - 2-hand control panel adjacent - ground level installation - table top 2510 x 2530 x 135 mm (approx. 6700kg) - central lubrication - operating instructions with circuit diagrams space requirement L x W x H 372 x 260 x 460 cm Space requirement for horizontal transport L x W x H 460 x 372 x 260 cm Weight approx. 50 ton. The machine was used for straightening of red-hot steel flanges. From insolvency - in good condition

Condition: used, Year of construction: 1984, pressure 63 t distance between columns 680 mm stroke 150 mm total power requirement 15 kW weight of the machine ca. 7 t dimensions of the machine ca. 3 x 3 x 3 m No. 0214 ydraulic high-speed double-column press SMG DS 63 Clearance between the uprights 680 mm, max. distance between table top and ram 385 mm, Ejector force 15kN, largest ram stroke 150 mm. Working area: Table surface 660 x 460 Bws Iaetr U Ius Unxisl Drive: 15 kW pressing force 630 kN, retraction force 51 kN

Condition: new, Year of construction: 2025, pressing force: 500 t, table width: 1,200 mm, table length: 1,500 mm, Equipment: safety light barrier, STANDARD FEATURES -- Steel construction body and parts with vibration method stress / welding tension relieved - 8-surface slide / bearing for high precision and long-lasting use - PLC control and touch panel - Argon application for fixing elements and steel drawn pipes - EN ISO 15614-1/2017 welding application certificate accredited by TÜRK-AK and approved by WPQR and WPS. (Welding applications are supervised by "welding coordination engineers" certified according to EN ISO 14731) - Parallelism and perpendicularity tolerances are applied according to ISO AND DIN Norms. (≤ 120 microns/meter) - PARKER / REXROTH hydraulic unit - SIEMENS / SCHNEIDER electrical consumables - Automatic central lubrication system - Two-hand control Bwe Ia Unxsvtafuoiol - Cooling system TECHNICAL SPECIFICATIONS MODEL CHP 500 PRESSURE (TON) 500 STROKE (MM) 800 TABLE SIZE (MM) 1200X1500 RAM SIZE (MM) 1200X1500 TABLE TO RAM DISTANCE (MM) 900 PRESS HEIGHT (MM) 3300 PRESS DEPTH (MM) 2200 PRESS WIDTH (MM) 3250 TABLE DIMENSION FROM FLOOR (MM) 1000 MAIN CYLINDER DIAMETER (MM) 500 MOTOR POWER (KW) 45 MAX WORKING PRESSURE (BAR) 250 PRESS WEIGHT (KG) 23000 COUNTRY OF ORIGIN: TURKEY WARRANTY PERIOD: 24 MONTHS DELIVERY PERIOD: 4 (FOUR) MONTHS DEPENDING ON ORDER PRODUCTION FROM 100 TONS TO 2500 TONS IS AVAILABLE.

Condition: used, Year of construction: 1996, machine/vehicle number: 14.194, Pressure total: 80 - 800 ton Ram stroke: 1600 mm Free frontal opening L-R: 2850 mm Free lateral opening F-B: 1000 mm Daylight: 1900 mm Table surface area : 2800 x 2000 mm Slide area: 2800 x 2000 mm Die cushion capacity in table: 32 - 320 ton Die cushion stroke: 400 mm Die cushion pad area: 2500 x 1700 mm Approach speed: 400 mm / sec Working speed: 5 -42,7 mm / sec Return speed: 420 mm / sec Bo Iaeu Saaae Unxiswl Required power: 246 kW Height over floor approx.: 7785 mm Weight of machine approx.: 100 ton No. of moving bolster: 1 pcs.

Condition: used, Year of construction: 1993, Force: 100 tons Max. distance between columns: 1400mm Stroke: 250 mm Windows: 400mm Daylight: 400mm Table: 1250x1100mm Ram: 1250x1100mm Speed fast down: 400mm/sec. fast uo: 330mm/sec. work: 24-43 mm/sec. Power: 33kW Weight: 10.000 kilos Height: 3300mm Width: 1700mm Depth: 1800mm 2-Hand operation Bws Ia Unxsc Uwx Doijl Cutting dampers

Condition: used, Year of construction: 1985, pressure 63 t passage width 1350 mm stroke 300 mm total power requirement 16 kW weight of the machine ca. 10 t Bws Ia Ust Hwxusnxijl dimensions of the machine ca. 2,0 x 1,8 x 3,4 m

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 pressure force 200 ton. Stand passage front 2050 mm Be Ia Unedzp Tcjxiswl column passage sideways 2030 mm table area 2800 x 2000 mm ram area 2000 x 2000 mm ram stroke 700 mm installation height max. 1850 mm Table height above floor 750 mm ram retraction force 33 ton. Rapid feed speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Motor power main motor 75 kW Motor power control pump 11 kW Mains connection 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation - central lubrication - Operating instructions with circuit diagrams Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm weight 38 ton. The machine was used as a production press at Volkswagen until 2000. From 2000 the machine was used as a tool testing press in a tool shop. good condition

Condition: good (used), Year of construction: 1999, 2 x hydraulic press Raster Zeulenroda 1 x PYE 100 S/1-M Year of manufacture: 1999 1 x PYE 63 S/1-M Be Iajvtrl Ho Unxiswl Year of manufacture: 1990 Machines can be viewed under power.

Condition: new, Year of construction: 2025, pressing force: 500 t, table width: 1,200 mm, table length: 1,500 mm, retraction force: 175 t, Equipment: safety light barrier, o Steel construction body and parts with stress / welding tension removed by vibration method o PLC control and touch panel o Argon application for fixing elements and steel drawn pipes o EN ISO 15614-1 / 2017 welding application certificate which has been approved by TURK-AK and passed WPQR and WPS approval. (by certified engineers according to EN ISO 14731) o Parallelism and vertical tolerance are applied according to ISO and DIN norms. (≤ 120 microns/meter) o PARKER or REXROTH hydraulic unit o SIEMENS / SCHNEIDER in switchear components o Automatic central lubrication system o Two-hand operation Cooling system 500/175 TONS H TYPE HYDRAULIC DEEP DRAWING PRESS TECHNICAL SPECIFICATION – EHSP TYPE H Type Steel Structure with 8 Guided Working Table BODY MATERIAL St52 SLIDE BEDS KESTLUB CAPACITY (RAM) 500 TONS CAPACITY (POT) 175 TONS MAIN TABLE SIZE 1200 x 1500 mm MOVING TABLE (RAM) SIZE 1200 x 1500 mm POT TABLE SIZE 1000 x 1200 mm HORIZONTAL PRECISSION 120 micron/mt. PERPENDICULAR PRECISSION 60 micron/mt. STROKE (RAM) 1000 mm STROKE (POT) 350 mm MIN. OPENING HEIGHT 100 mm MAX. OPENING HEIGHT 1100 mm STRESS RELIEF afer WELDING By high frequency vibration technology WELDING APPLICATION - EN ISO 15614-1 / 2017 welding application certificate which is WPQR and WPS approved by TURK-AK. (Welding applications are inspected by engineers certified according to EN ISO 14731) MAX. PRESSURE 250 Bar ENGINE POWER 37 kW – IE3 PUMP FLOW RATE 101 cm³ – REXROTH Bwe Ievtaafsa Unxijl FREE FALLING SPEED 180 mm/sec. PRESSING SPEED 10 mm/sec. ASCENDING SPEED 200 mm/sec. DIE-CUSHION WITH SPEED – UP 70 mm/sec. DIE-CUSHION WITH SPEED – DOWN 30 mm/sec. MAIN CYLINDER DIAMETER Ø500 mm – Ck45 POT CYLINDER DIAMETER Ø390 mm – Ck45 AUXILIARY CYLINDER NUMBER 2 Pcs. PRESS HEIGHT 5900 mm PRESS DEPTH 3500 mm PRESS WIDTH 2400 mm TABLE HEIGHT FROM FLOOR 1550 mm PRESS SIDE WINDOW SIZE 500x1000 mm PRE-FILLING VALVE NG 200 HYDRAULIC UNIT REXROTH WET COOLING EXCHANGER EMMEGI – CIESSE OFF-LINE FILTRATION REXROTH ENGINE USED IN THE UNIT IE3 LEVEL INDICATOR REXROTH FAN COOLING REXROTH PRESSURE FILTER REXROTH RETURN FILTER REXROTH OIL AND HEAT INDICATOR REXROTH USED VALVES REXROTH FILTER POLLUTION WARNIG ELECTRONIC CONTROLLED LUBRICATION AUTOMATIC – ADJUSTABLE ON THE SCREEN RAM STROKE ADJUSTMENT ADJUSTABLE ON THE SCREEN RAM TONNAGE ADJUSTMENT ADJUSTABLE ON THE SCREEN SYSTEM ERROR INFORMATION ADJUSTABLE ON THE SCREEN PRESS CONDITION INFORMATINON ADJUSTABLE ON THE SCREEN MOLD MEMORY ADJUSTABLE ON THE SCREEN HYDRAULIC FORGET OIL TEMPERATURE INFORMATION ADJUSTABLE ON THE SCREEN LINEAR TRANSDUCER NOVATECHNIK or TURCK TEMPERATURE SENSOR PT100 4.20 mA. ORDEL or REXROTH PLC DELTA TOUCHSCREEN DELTA KTP 7 '' ELECTRICAL COMPONENTS SIEMENS – SCHNEIDER SAFETY PLC SIEMENS FAILSAFE SAFETY LIGHT CURTAINS KEYENCE, LEUZE, PILZ or SICK – 2 pcs. FEEDBACK VALVES REXROTH – 3 pcs. PARKİN CYLINDER PNEUMATIC – 1 pc. APPROXIMATE WEIGHT – EHSP 30 TONS COUNTRY OF ORIGIN: Türkiye 24 MONTHS WARRANTY

Condition: used, Year of construction: 2006, machine/vehicle number: 18282, Pressure total: 140 ton Stroke: 800 mm Daylight: 1.004 mm Free frontal opening L-R: 2.060 mm Table surface area : 2.000 x 520 mm Slide area: 2.040 x 520 mm Working speed: 4 -20 mm / sec Rapid travel: 135 mm / sec Return speed: 120 mm / sec Bo Ia Uouqd Nuonxiowl Weight of machine approx.: 14 ton Height over floor approx.: 4.810 mm Oil volume: 700 l

Condition: used, Year of construction: 1970, machine/vehicle number: Lager-Nr.: 2298, Force: 100 tons Windows: 500mm Daylight: 800mm Distance between columns: 1260mm Table height over floor: 1450mm Table: 1250x1000mm Ram: 1250x1000mm Speed: Down: 400mm/sec. Work: 72mm/sec. Up: 300mm/sec. Stroke: 500mm Die cushion: 40 tons, stroke: 250mm Requested power: 50PS Weight: 22 tons Height: 4500mm Control Siemens S7 Sick light guards Bj Ia Ujdc Dcqjnxiowl Floor standing

Condition: used, Year of construction: 1987, pressure 125 t distance between columns 1050 mm stroke 250 mm total power requirement 40 kW weight of the machine ca. 8,5 t dimensions of the machine ca. m Be Ia Unxet Hwuioiowl

Condition: used, Double column hydraulic press RASTER ZEULENRODA (WALTER) type WUP S 60 Machine. No. 136 / 7 (156-165) Year of construction 1999 Basic machine built in 1987, completely overhauled in 1999 with new control system Pressure capacity 60 ton. Stand width 1090 mm Lateral column passage 265 mm (one-sided) Ram area 650 x 300 mm Additional plate on ram 990 x 550 x 60 mm Table surface 990 x 550 mm Plunger stroke max. 320 mm Installation height 330 or 390 mm Table height above floor 980 mm Hydraulic operating pressure 320 bar Rapid traverse downwards 75 mm/s Rapid traverse upwards 100 mm/s Working speed 17 mm/s Return speed 33 mm/s Motor power 15 kW (2x 7.5 KW) Mains connection 400 Volt, 50 Hz, 15.5 kW - Press safety control PILZ PSS 3056-1 + PXT 305 Com-LC - Manually adjustable limit switch cams for stroke limitation - 2-hand operation and electric foot switch - Press force adjustment via handwheel - ram plate additionally guided by 2 lateral guide rods, Ø 50 mm - Table top with 18 mm T-slots, slot spacing 175 mm - Through-hole table top Ø 100 with insert reduction to Ø 30 mm - Plunger plate with 18 mm T-slots, slot spacing 150 mm - Additional ram plate without fastening grooves - Electrical cabinet on the side of the machine stand Bs Ia Uouicg Uenxiswl - Electrical circuit diagram - 2 monitored safety valves for the hydraulics - UVV for manual insertion work Space requirement L x W x H 1950 x 1000 x 2700 mm Weight 2.6 tons good condition

Condition: used, Year of construction: 1992, pressure 300 t passage width 1350 mm Bs Ijvn U Sroa Unxiowl stroke 500 mm column travel -side 830 mm table surface area 1350x1380 (1870x1380) mm table height 1060 mm total power requirement 45 kW weight of the machine ca. 20 t dimensions of the machine ca. BxTxH 2500x2000x3950 mm

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, total height: 2,450 mm, total width: 1,000 mm, total length: 2,630 mm, pressing force: 150 t, table width: 600 mm, table length: 1,520 mm, reverse speed: 10 mm/s, ram stroke: 300 mm, distance between stands: 610 mm, clearance between the columns: 1,520 mm, pressing speed: 5 mm/s, Sahinler plate bending machine in very nice condition Bws Ia Unxevcpl Aeisl capacity 150T with peddestal 2-hand control

Condition: used, Year of construction: 2006, machine/vehicle number: 18282, Pressure total: 140 ton Stroke: 800 mm Daylight: 1.004 mm Free frontal opening L-R: 2.060 mm Table surface area : 2.000 x 520 mm Slide area: 2.040 x 520 mm Be Ia Unjuqd S Asxiswl Working speed: 4 -20 mm / sec Rapid travel: 135 mm / sec Return speed: 120 mm / sec Weight of machine approx.: 14 ton Height over floor approx.: 4.810 mm Oil volume: 700 l

Condition: used, Year of construction: 1994, Force: 300 tons Daylight: 1.200mm Max. distance between columns: 1.600mm Table: 1.600x1.300mm Bj Ia Ujc Uv Aaenxijwl Ram: 1.600x1.300mm Stroke: 900mm Speed fast down: 400mm/sec. fast up: 300mm/sec. work: 10,5mm/sec. Requested power: 42,5 kW Weight: 22.000 kilos Height: 3.500mm Width: 2.110mm Depth 1.800mm Floorstanding Reconditioned 2003 Siemens S7 control CE no windows

Condition: used, Year of construction: 1984, pressure 500 t passage width 750 mm stroke 120 mm Bwo Iaet Hwpys Unxiel total power requirement 57 kW weight of the machine ca. 16 t dimensions of the machine ca. m

Condition: new, Functionality: fully functional, Hydra specma T22061100010006 Hydraulic power unit Bs Ia Unxouadbuoiowl LARGE STOCK AVAILABLE

Condition: used, Year of construction: 1980, pressure 20 t distance between columns 450 mm stroke 100 mm table surface area 440x320 mm ram surface Ø140 mm hole in the table Ø50 mm table height 900 mm tool hole in ram Ø40 mm total power requirement 3 kW weight of the machine ca. 2 t Bwo Ia Unevnwd Dsxiel dimensions of the machine ca. BxTxH 1400x1200x2200 mm

Condition: used, Year of construction: 2001, machine/vehicle number: Z 293 - 040, Capacity: 400 ton Stroke: 600 mm Daylight: 900 mm Table surface area : 2000 x 1500 mm Slide area: 2000 x 1500 mm Working speed: 0 - 10 mm / sec Bs Ijuqd I Rea Unxiowl Return speed: 20 mm / sec Oil volume: 350 l Height over floor approx.: 3900 mm Dimensions L x W x H: 2650 x 1600 x 3900 mm Required power: 45 kW Weight of machine approx.: 32 ton Standard configuration The press has a sideways extending table plate.

Condition: used, Year of construction: 1986, Pressure total: 500 ton Stroke: 1100 mm Daylight: 1500 mm Table surface area : 2000 x 1250 mm Slide area: 2000 x 1250 mm Die cushion capacity in table: 160 ton Die cushion stroke: 300 mm Approach speed: 650 mm / sec Required power: 55 kW Weight of machine approx.: 50 ton Be Ia Uneuqdqlexijwl Standard configuration The press was completely overhauled mechanically, hydraulically and electrically in 2008.

Condition: used, Year of construction: 1989, Pressure total: 1400 ton Stroke: 950 mm Bo Ia Uneuqdi Uexijwl Daylight: 2000 mm Table surface area : 3600 x 2500 mm Slide area: 3600 x 2500 mm Die cushion capacity in table: 400 ton Die cushion stroke: 500 mm Die cushion pad area: 3060 x 1860 mm Approach speed: 400 mm / sec Working speed: 40 / 80 mm / sec Return speed: 400 mm / sec Oil volume: 5000 l Required power: 450 kW Weight of machine approx.: 240 ton Standard configuration with hydraulic tool clamps on the ram