Used Eumega Md-2 for sale (42,038)

Condition: ready for operation (used), Indramat MAC114C-0-MD-2C/130-A-1 permanent magnet motor, serial no. according to photo, used, normal traces of use, 100% functional, scope of delivery according to photos Gelji D Irashcdwzoiw

Condition: used, color: other, Empty weight: 6 kg Gijlhcdwonqz Izezow Not tested. No guarantee. Please contact us if you can't find what you are looking for.

Condition: ready for operation (used), Indramat MAC114C-0-MD-2-C/130-A-1 permanent magnet motor, serial no. according to photo, used, normal traces of use, 100% functional, scope of delivery according to photos Gijlhoi D Irdscdwzjw

Condition: used, color: other, Empty weight: 6 kg Not tested. No guarantee. Please contact us if you can't find what you are looking for. Gslhcenzkwxjdwzsiw

Condition: used, color: other, Empty weight: 6 kg Gislspmqprshcdwzsw Not tested. No guarantee. Please contact us if you can't find what you are looking for.

Year of construction: 2008, Condition: excellent (used), Applications : - Water supply, irrigation. - Heating, ventilation and air conditioning. - Pressure groups, cooling. - Water treatment. Advantages: - Easy to install and maintain. - Compact solution for residential and small collective use. - Guaranteed water supply in case of failure of an electric pump. - Assembly, adjustment and testing of the unit carried out directly at the factory. - Flexible operation due to variable speed. Features : - Maximum flow rate: 320 m³/h. - Delivery height: 160 m. Giolhcdjmih Aaswzew - Power range: 2x0.25 kW. - Operating pressure: 10/16 bar. - Ambient temperature: 0°C - +40°C. - Liquid temperature : -10°C - +60°C. - Hydrovar®HVL variable speed drive. Motor : - Power supply: 1 x 230V. - Insulation class: F (155°C). - Protection: IP55. Materials : Pump body and impellers: Stainless steel 304. Collectors: AISI 304 stainless steel. Non-return valves: Brass. Certified for use in drinking water production.

Year of construction: 1996, Condition: good (used), Make:KRAUSS-MAFFEI Description: used type: KMD-2-50-KK output capacity: max. approx. 140-180 kg/h for H-PVC pipes, depending on material and product this can vary year of construction:1996 Screw diameter:50-103 mm (conical) Gelhcjh Nmt Dsdwzsiw Screw length:1300 mm Screw speed: max. 43 m/min. Drive motor: DC motor 25 kW Cylinder heating/cooling zones: 4/3 (oil cooling) inlet piece heating zone: 1 tool heating zones: 5 Equipment: dosing unit with hopper, vacuum pump for barrel degassing, barrel cooling unit, screw tempering unit Gearbox, was installed at 53,000 hrs. Overhauled worms and the cylinder Note: current running time is 62,590 hrs. Good Second hand functional

Year of construction: 1996, Condition: ready for operation (used), Output: 140-180kg/h, screw diameter: 50-103mm, screw length: 1300mm, max. screw rotational speed: 43/min, connected load: 25kW, operational hours counter: 62,590h, including dosing unit with hopper, vacuum pump, cylinder cooling aggregate and screw temperature control. Giolohz Dyajhcdwzsw

Condition: used, Year of construction: 1992, Vertical and horizontal milling machine Make: EUMEGA Type: MDV5 Year: 1992 Technical data: Make: Eumega Type: MDV5 Year of manufacture: 1992 Table size: approx. 305 x 1270 mm X-travel: approx. 460 mm Y-travel: approx. 500 mm Z-travel: approx. 610 mm Speed: variable Tool holder: SK 40 Total power: 3.75 kW Dimensions WxDxH: 1200 x 1100 x 1800 mm Weight: approx. 2.6 t All data without guarantee. A demonstration is possible at any time in our exhibition hall. Golowncwhohcdwzoiw

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, Only aluminum was processed. Control: CNC 5-axis control SIEMENS 828 D Si Touch Screen PPU 290 LCD 15Shop Mill TECHNICAL DATA Travel range: X-axis 620 mm Y-axis 520 mm Z-axis 460 mm B-axis +110°/-50° C-axis 360° Clamping table Table diameter 650 mm Workpiece size max. 520 x 330 mm Workpiece weight max. 300 kg Drive power (100% ED) 9 kW Speed range up to 12000 1/min Tool holder SK 40 Tool changer Number of tools 60 EQUIPMENT/ACCESSORIES  5-sided machining  Automation ZERO Clamp, type Zerobot 100 V Automatic feeding of workpieces including 2 zero-point clamps  3 D measuring probe Workpiece measurement  Table probe tool measurement (Hexagon m&h)  Automatic tool changer ATC 60 Gjlhcdetp T Npswzoiw  Rotary table with B/C axis HEIDENHAIN encoder  Linear guides in the X, Y and Z axes  Control cabinet air conditioning unit  Spindle oil cooler (active)  Central lubrication LHL  Coolant system  Internal coolant supply IKZ 30 bar with double filter system  Chip flushing  Air through the spindle  Water gun/air gun  Chip conveyor (scraper belt conveyor)  Chip trolley  Ethernet, USB & RS 232 interfaces  Electronic handwheel  Work area lighting LED  3-color signal lamp LED  Machine set-up elements  Documentation

Year of construction: 2007, Condition: used, Functionality: fully functional, machine/vehicle number: 114900600003, Temperature control device for plastic injection molding and industrial applications up to 160 °C. Technical specifications: Voltage: 400 V Power: 26 kW Gijlhcdevc Afijwzsw Circuit diagram No. 36350 Current: 41 A Volume: 6.4 liters Flow temperature: 160 °C Frequency: 50 Hz PS: 8 bar Dimensions: 105x46x140 cm Total weight: 210 kg The Regloplas temperature control device model P160MD/12/SM51/SK/RT50 is a state-of-the-art solution for precise temperature control in industrial applications. With its compact design, it offers efficient use of the available space without compromising on performance. The device enables precise control of the temperature, which leads to improved product quality and process stability. Thanks to its user-friendly interface and intuitive operation, the P160MD is easy to handle and ideal for various applications in plastics processing, metalworking and other industrial fields. The robust construction ensures durability and reliability, while the advanced technology ensures a fast response time.

Condition: new, Functionality: fully functional, machine/vehicle number: FDU1704/2368302 002, power: 0.55 kW (0.75 HP), rotational speed (max.): 1,440 rpm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 41 kg, torque: 4 Nm, type of cooling: air, protection type (IP code): IP55, The Siemens geared motor is a powerful and reliable drive solution that is ideal for a wide range of industrial applications. With its compact design and robust construction, this geared motor offers high efficiency and durability, even under demanding operating conditions; the motor is both water and wind resistant. It is equipped with a high-quality electric motor that delivers excellent performance and high torque with low noise levels. The integrated gear unit ensures optimum adjustment of the speed and torque, making the motor versatile - whether in conveyor systems, mechanical engineering or automation technology. Thanks to advanced Siemens technology, the geared motor ensures high energy efficiency, resulting in reduced operating costs and more environmentally friendly use. Easy installation and maintenance make it a practical choice for any operation. Gielhceurv Ufodwzjw

Condition: new, Functionality: fully functional, machine/vehicle number: FDU1509/2272156 001, power: 0.55 kW (0.75 HP), rotational speed (min.): 1,440 rpm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 49 kg, torque: 559 Nm, protection type (IP code): IP55, This Siemens geared motor is a powerful and compact drive solution designed for versatile industrial applications. With its high torque, high efficiency and robust design, this motor is ideal for use in materials handling, machine building and automation systems. Gelourvq Tehcdwzsiw The motor offers reliable performance and durability, making it an excellent choice for companies looking for quality and efficiency.

Condition: used, turning diameter over bed 260 mm turning diameter over slide rest 140 mm turning length 500 mm centre height 125 mm bed width 160 mm spindle turning speed range 16: 110-3600 U/min spindle bore 28 mm face slide travel 120 mm upper slide-adjustment 120 mm tailstock quill taper MT 2 Gijlevtthiehcdwzow tailstock quill adjustment 80 mm drive motor 0,37 / 0,88 kW weight of the machine ca. 350 kg dimensions of the machine ca. 1,3 x 0,6 x 1,2 m Mechanic's lathe with manual feed and spindle support, drive via V-belt and stepped pulleys as well as 2-pole motor, hardened, finely ground work spindle, support adjustment over the entire bed length using eccentric clamping lever, three-jaw chuck, collet device with pliers, crank tailstock, cast base. Machine dealer with own stock of 1600 m².

Condition: ready for operation (used), Philips 4022 226 3647 2 RM / RM DRIVE MOD card, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Gslhji Echyscdwzjiw

Condition: used, mileage: 724,000 km, power: 235 kW (319.51 HP), first registration: 12/2012, overall weight: 26,000 kg, fuel type: diesel, axle configuration: 3 axles, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, Manufacturer Scania Model P320 6x2*4 Joab Anaconda MD 22,1 m3 Year 2012 Condition Good Serial Number YS2P6X20002081081 Ref. nr. 1167512 Reg. date: Engine: DC9 Hk: 320 Km: 724000 Gearbox: Opticruise (GRS895) Eurotype: 5 Diesel tank: 1 Giolhcdwsr Hz Uxszjw Tank liter: 300 L Rear view camera: ? Air conditioning: ? Radio: ? Refrigerator: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 385/55R22.5 - 315/70R22.5 - 385/55R22.5 Cover% left 60% 30% 60% Front suspension: Air Suspension rear: Air Wheelbase: 5100 mm Toolbox: ? Hydraulic system: ? Total weight: 26000 Kg Net weight: 17400 Kg Load capacity 8600 Kg Manufacturer: Joab Anaconda MD

Condition: used, Extraction installation Riedex MD-280 Connection diameter 300mm Filter Bags 48 Pieces Capacity 6000m³/h Electric knock motor Main fan 11kW Transport fan 4kW Filter bags need to be replaced complete with control box and +/- 40m pipes. Total dimensions filter box: 1200x3400x3400mm - Number of filter bags [pcs]: 48 - Connection diameter [mm]: 300 - Main fan power [kW]: 11.0 - Control cabinet present: Yes - Shaking system: Yes - Collection container: Yes - Transport fan included: Yes - Transport fan power [kW]: 4.0 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Gielhcdswng Nnowzjw Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), Wide belt sander for calibration and fine sanding Giolhcstwzyfodwzsw Working width 1100 mm Min. / max. workpiece height 3 - 120 mm Feed motor power 0.8 kW Sanding belt speed 18 m/sec Sanding belt dimensions 1115 x 2620 mm Feed speed 4.5 / 9 m/ min Suction connection 3 x 160 mm Compressed air connection 6 bar 1st unit Sanding roller rubber-coated 90 Sh Motor power 11 kW 2nd unit Combi unit Rubber-coated sanding drum 60 Sh Sanding pad, rigid Motor power 11 kW 3. cleaning brush unit Automatic workpiece thickness adjustment at infeed with digital workpiece thickness display Table extension in the outfeed Dimensions approx. L x W x H = 2291 x 1784 x 2350 mm Weight approx. 3000 kg Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: used, No. 3221 Vacuum dryer / drying chamber DWT / IWT MD 2600 x 13000 Gjljwiw Evehcdwzjiw Used The machine is still connected to power and heating, but has not been used for 3 years Dryer diameter 2600 mm Dryer length 13000 mm Package length 13000 mm Package width 1200 mm Package height 2100 mm Gross capacity 33 m3 Net capacity 20 m3 sawn timber or 15 m3 logs Electrical connection 44 kW Electrical consumption 15 kW/h Water drain 50 mm Water connection 25 mm Heat connection 87 kW, 85 °C hot water at the dryer Heat consumption 500 kcal per liter of moisture or 0.6 kW per liter of moisture Including BUDERUS B305/160 boiler, heat output 141 - 160 kW The boiler is operated with natural gas The system is supplied as a fully assembled unit Boiler cylindrical on 3 supports Hydraulic, fully automatic boiler lock Boiler material solid stainless steel to DIN, x5 Cr Ni 189 150 mm insulation, clad with 1 mm galvanized sheet steel Rails in stainless steel, spacing 600 mm 1 rail bridge in front of the boiler 4 trolleys for loading and unloading, length 3200 mm each 12 fans with Siemens motors, 2 spare motors Heating coil as stainless steel finned tubes with aluminum fins, length 150 m, surface 250 m2, diameter 25 mm Flow and return pipe diameter 80 mm Heating medium 85 °C Hot water at the consumer Circulation pump capacity 75 m3/h Vacuum pump BUSCH LX 0260 B, year of construction 2013 Nominal suction capacity min. 200 m³/h / max. 455 m³/h / final pressure 33 hPa (mbar) 1 electric condenser for condensing the vapor 3 fans for cooling or condensing the vapors PLC control Tracks in front of the dryer 14000 x 600 mm The entire system stands on a concrete floor and can be lifted with a crane and loaded onto trucks Transport dimensions approx. 18000 mm long, 3050 mm high (without cooling system) Sale on behalf of the customer, ex location near 09131 Chemnitz, without dismantling, transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: as good as new (ex-display), Year of construction: 1998, SVECIA semi-automatic SSM-D, year of manufacture 1998 Gelhcshylzvodwzjiw like new conditionprinting size 880 x 1250 mm operation via touch panelinfinitely variable adjustment of printing table, squeegeesqueegee speedpneumatic squeegee change-overpneumatic squeegee pressure compensation Pneumatic screen frame clamping with this machine all print parameters are stored for each jobif required, these settings are automatically recalled and set again LxBxH 2,2m , 2,75m , 1,4m Gewicht 800 kg

Condition: good (used), Functionality: fully functional, Rommel GmbH a Mühlbauer Company Transport module, BMD 500 2 S Model: BMD5002S Year of construction: 2004 Gijlhcdsucd Ugswzow Electrical data: Rated voltage: 230V AC Frequency: 50Hz Current: 2A

Condition: excellent (used), Year of construction: 2014, total length: 1,380 mm, total width: 700 mm, total height: 1,240 mm, Meat Portion Cutter Gelhcjwa Dkmsdwzeiw Brand Handtmann Model GMD 99-2 Number: 33909 Year of construction: 2014 Working width: 240 mm Overall dimensions: 1380 mm x 700 mm x 1240 mm

Condition: good (used), MIG/MAG hose package, MIG/MAG welding torch Gisljv Hn Azehcdwzjw -MIG/MAG hose package: Gas-cooled -Length: 4.0 m -Welding gun: Type DIX MS 2 -Transport dimensions: 500/380/H80 mm -Weight: 4.5 kg

Condition: new, Year of construction: 2025, Functionality: fully functional, total height: 2,970 mm, total width: 930 mm, total length: 930 mm, overall weight: 250 kg, input voltage: 400 V, suction capacity: 1,200 m³/h, LTA (JUNKER Group) mechanical dust filtration systems capture and remove dust and fumes in industrial applications. They use cartridge or bag filters to reliably capture even the finest particles. Thanks to automatic filter cleaning, they offer consistently high separation efficiency and are available as mobile or stationary systems. Gijlhcjv S E Ncjdwzjw

Condition: as good as new (ex-display), Year of construction: 1998, SVECIA semi-automatic SSM-D year of manufacture 1998 refurbished machine, very good condition printing size 750 x 1050 mm operation via touch panelinfinitely variable adjustment of printing table, squeegeesqueegee speedpneumatic squeegee change-overpneumatic squeegee pressure compensation Pneumatic screen frame clamping with this machine all print parameters are stored for each jobif required, Gjlhcehvrviedwzjiw these settings are automatically recalled and set again LxWxH 2,0m , 2,55m , 1,4m Weight 700 kg youtu.be/-oPRkSZTFe8