Used Eccentric presses single column 55-99t for sale (116)

Year of construction: 1971, Condition: good (used), Pressing force: 63 t Cgslqsh N S Sde Nrq Tst Table: 660 x 480 mm ram: 450 x 280 mm throat: 250 mm Ram stroke: 16 to 125 mm Sheet thickness continuous stroke: 3.2 mm max. distance table ram: 417 mm drop-through hole: 280 x 250 mm Adjustment ram downwards: 70 mm Stroke rate: 80 /min Connection: 6 kW Accessories/equipment: Condition: good Weight: 5 t Dimensions: 1.500 x 1.600 x 2.700 mm

Condition: good (used), very fast SCHULER with data : Power 63 to Colovpihksq Nrq Tjgt Stroke rate 140 H/min throat 250 mm ram stroke 8-100 mm table , WxD approx. 700 x 480 mm installation height approx. 400 mm .

Condition: good (used), Nominal force : 63 tN Force point : 23 mm Cadence : 70 g.p.m. Height adjuntment of slide : 70 mm Course. : 12-110 mm Tool holder hole : 50 mm Ejector course : 56 mm Neckline : 250 mm Dimensions slide base IDxFA: 500x350 mm Dimensions of the movable plate IDxFA 200x500 mm Movable plate thickness 85 mm Height between slide and movable plate 250 mm Opening between uprights 415 mm Movable plate hole diam. 280 diam 250 mm Movable plate ring hole diam.140 mm Total energy: 115 kgs Steering Wheel straps : B-92 Cgoljgrk Ayoq Nrq Tet Table dimensions IDxFA 810x520 mm Table hole 335x250 mm Pressure required for clutch or trigger 5,5 kg/Ca Main engine 75 Cv 1450 rpm Connected to 380 v Frequency 50 Hz

Condition: good (used), Year of construction: 1989, Functionality: fully functional, total height: 25,500 mm, table width: 800 mm, table length: 630 mm, stroke adjustment: 105 mm, total width: 14,250 mm, total length: 17,900 mm, overall weight: 5,850 kg, pressing force: 63 t, height adjustment type: mechanical, power: 7.5 kW (10.20 HP), Eccentric press LEN 63C. Year prod. 1989(SMERAL TRNAVA Czech Republic). Technical data: Colq Notzxdzsrq Tegt - pressing force: 63 tons - number of strokes in automatic: 65/130 min - number of jumps manual operation: 45/50 min - slider stroke adjustment: 10-105 mm - slide stroke: 70 mm - table surface: 800 x 630 mm - slider surface: 450 x 280 mm - overhang: 315 mm - table - slider clearance: 335 mm - clearance between columns: 355 mm - number of gears: 2 - motor speed: 730/1440 min - motor power: 4/7,5 kW - press dimensions: 1425 x 1790 x 2550 mm - weight: 5850 kg The technical condition of the machine is good. It is possible to make a visual inspection and check the machine in operation.

Condition: used, Year of construction: 1991, pressure 60 t throat 280 mm stroke 1 mm ram adjustment 60 mm no. of strokes 110 Hub/min table surface area 740 x 550 mm clamping plate 740 x 555 mm ram surface 380 x 200 mm Cgolsv Az T Sjq Nrq Tet daylight, max. stroke above - ram adjustment above 360 mm total power requirement 5,5 kW weight of the machine ca. 3,850 t dimensions of the machine ca. B 1,1 x T 1,6 x H 2,3 m - fixed table - clamping plate - hydraulic clutch Ortlinghaus with additional brake - manual central lubrication

Condition: good (used), Year of construction: 2001, operating hours: 8,000 h, Functionality: limited functionality, 3-fold Eccentric press built on 1 frame for dustpan production, equipped with feeder and pick and place unit for automatic product processing. 1st 80 ton press equipped with a 4 ton pull cushion, 2nd 2 presses 30 ton. Cgslq Nevx N U Asrq Tet

Condition: good (used), Year of construction: 1974, Eccentric press, single-column press, punching machine, single-column eccentric press, eccentric press, single-column press -Manufacturer: Kaiser, punching machine with pliers feed type PO 40 F -Plier feed max. width: 175 mm -Pressure capacity: 55 tons -Stroke: adjustable 9 to 60 mm -Stroke number: 70-350 strokes/min -Table size: 590 x 410 mm -Table recess: 290 x 150 mm - Throat: 220 mm -Punch holder: Ø 38 mm -Insert height 335 mm Celqeilq H Uj Nrq Tegt -Dimensions: 1905/1540/H2940 mm -Weight: 3720 kg

Condition: new, Year of construction: 2025, throat depth: 280 mm, ram adjustment: 85 mm, drop-through hole in table: 190 mm, table width: 540 mm, table length: 740 mm, stroke adjustment: 100 mm, pressing force: 80 t, table height above floor: 755 mm, ram bore: 40 mm, power: 7.5 kW (10.20 HP), punching force: 80 t, Equipment: safety light barrier, A TYPE ECCENTRIC PRESSES GENERAL FEATURES  Steel construction body,  Stress relief will be applied to the body and welded parts with vibration.  Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards  Pneumatic clutch and brake combination – OMPI-Italy  Ram supported by 8 slides  Parts such as ram, connecting rod, claw are cast steel, GS52  High strength solid crankshaft – 4140  Inside of connecting rod will be bronze, (Zr14)  With spare table,  With hydraulic fuse  Ratchet apparatus table-ram adjustment  Automatic central lubrication,  Pneumatic pedal with ratchet and double hand control with time adjustment,  With electric counter,  PLC application and touch screen – DELTA  Electrical switchgear materials – SIEMENS-SCHNEIDER  Double coil safety valve – GPA, TOPAIR  Locked position switch and panel,  OPTIONAL FEATURES  CE application  Finger protection beam barriers – SICK, LEUZE, KEYENCE  Security PLC (Controls the entire electrical system, valve, double and pedal) – PILZ  Safety wedge,  Protective enclosures will be within the scope of CE.  Speed Control Application  Automatic Lubrication System BODY A TYPE MONOBLOCK BODY TYPE A SERIES Capacity 80 Tons Throat Depth 280 Mm Table-Ram Distance 400 Mm Slide-Table Distance 420 Mm Wall Distance 470 Mm Ram Adjustment 85 Mm Press Width 1000 Mm Press Depth 1735 Mm Press Height 2300 Mm Front Anchor Dimension 720 Mm Side Anchor Dimension 1040 Mm Table Hole Diameter 190 Mm Table Size 540 / 740 Mm Mold Clamping Housing Diameter 40 Mm Ram Size 370 / 230 Mm Floor Table Dimensions 755 Mm Stroke Adjustment 10 / 100 Mm Stroke Number/Minute 50 Units/Min. Motor Power 7.5 KW Motor Speed 1450 RPM Weight 4,500 Kg Cgolq Nsvxtgiorq Tet ROLL UNCOUNTER AND ROLL DRIVER WILL BE PRICED EXTRA IF REQUESTED. IT IS NOT INCLUDED IN THE PRICE OF THE PRESS.

Condition: good (used), Year of construction: 1962, machine/vehicle number: 5601062, Offer 24287 Technical data: - Compressive force 60 t - Projection 350 mm - Table size approx. 900 x 600 mm - Table height adjustable - Drop-through hole in table approx. 300 x 200 mm Cgjlq Nrju Ilkieq Tjt - Maximum installation height approx. 360 mm - Plunger surface approx. 340 x 160 mm - Pivot hole in plunger 40 mm - Plunger adjustment 60 mm - Stroke adjustment 10 - 90 mm - Stroke rate 110 1/min - Rotary wedge clutch - Drive 400 V / 5.5 kW - Space requirement approx. W 2000 x H 2200 x D 2400 mm - Weight approx. 3500 kg

Condition: used, Single-column eccentric press RICHTER type PEKRS 80 Year of construction 1970 - overhaul 2024 Compressive force 80 ton. throat depth 350 mm Table size 900 x 650 mm Hole in the clamping table Ø 200 mm ram surface 700 x 500 mm Stroke rate 70 strokes/min. Stroke adjustment 6 - 100 mm ram adjustment 85 mm Installation height max. 400 Clamping pin bore Ø 50 mm Table height above floor 810 mm Motor power 8 kW Mains connection 400 Volt, 50 Hz - ORTLINGHAUS pneumatic clutch/brake combination - HERION XSz 32 press safety valve - Pneumatic ram compensation cylinder - Overload protection with breaker plate in ram - Central grease lubrication with hand pump Space requirement L x W x H 1800 x 1250 x 2830 mm Weight 5.7 tons Very good condition Technically overhauled and converted to the latest UVV with new electrics Control conversion in 05/2024 - suitable for manual insertion work - in accordance with DGUV Information 209-030 Press inspection and Machinery Directive 2006/42/EC Low Voltage Directive 2014/35/EU EN ISO 16092-1: Safety of machine tools - Presses - Part 1: General safety requirements Celsi Db Iboq Nrq Tjgt EN ISO 16092-2: Machine tools - Safety of presses - Part 2: Mechanical presses - Control system with plain text error messages and diagnostic screen for rapid fault localization - New electrical cabinet, mounted on the side of the machine - completely based on SIEMENS, with PLC S7-1200 PROFIsafe and 7" TFT touch display - Two-hand control panel with emergency stop and engagement lock - el. foot switch - Cam switch unit with run monitor control - Stroke release via HERION XSz 32 press safety valve with pneumatic pressure compensator - New wiring of the machine - Updated operating instructions The machine is equipped with 6 operating modes: 1 = Set-up 2 = Single stroke two-handed 3 = Single stroke foot 4 = continuous run foot 5 = automatic continuous run 6 = reverse run

Condition: used, Year of construction: 2001, pressure 100 t stroke 100 mm rules for accident prevention weight of the machine ca. 9 t Cgslq Nreul E Inoq Tjt

Condition: good (used), Year of construction: 1987, Functionality: fully functional, ram adjustment: 80 mm, total height: 24,100 mm, table width: 600 mm, table length: 800 mm, total width: 18,300 mm, total length: 20,400 mm, overall weight: 4,650 kg, pressing force: 75 t, To be viewed under power. Celorr Sybsq Nrq Tjgt

Year of construction: 1974, Condition: used, machine/vehicle number: P52111974, Item number: MA909 Manufacturer: Ebu Type: SK 75 Year of manufacture: 1974 Machine no.: P 5211974 length [mm]: 1700 width [mm]: 1200 height [mm]: 2450 Weight [kg]: Approx. 4500 Connected load: 380V Stroke [mm]: 16-140 throat [mm]: 300 Cgjljcanfwsq Nrq Tjt Punching force [to]: 75 Table size LxW: 800 X 620 Machine data: Stroke rate 105 / min Stool adjustment 80mm Table adjustment Control system: Set Up Single stroke foot Continuous run Accessories: Protective screen

Condition: new, Year of construction: 2025, ram adjustment: 85 mm, drop-through hole in table: 190 mm, table width: 600 mm, table length: 800 mm, stroke adjustment: 100 mm, pressing force: 80 t, table height above floor: 850 mm, Equipment: safety light barrier, D TYPE ECCENTRIC PRESSES GENERAL FEATURES o   Steel construction body, o   Stress relief will be applied to the body and welded parts with vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be available within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 80 Tons Table-Ram Distance 400 Mm Distance Between Walls 880 Mm Ram Adjustment 85 Mm Press Approximate Width 1150 Mm Press Approximate Depth 1500 Mm Press Approximate Height 2500 Mm Table Hole Diameter 190 Mm Cslq Nrsvxhb Ueq Togt Table Size 600 / 800 Mm Mold Clamping Housing Diameter 40 Mm Ram Size 245 / 410 Mm Table Dimensions from Floor 850 Mm Stroke Adjustment 10 / 100 Mm Stroke Number/Minute 50 Units/min. Engine Power 7.5 KW Engine Speed 1450 RPM Approximate Weight 6,500 Kg

Condition: used, Year of construction: 1989, pressure - t throat - mm stroke - mm total power requirement - kW Cgolq Nrqouq R R Sj Tjt weight of the machine ca. - t dimensions of the machine ca. - m

Condition: used, Single column eccentric press HEILBRONN type REPV 75 make no. 4467 year of construction 1972 pressure force 75 ton. Cgjlq Nsdzqb Uerq Tst throat 300 mm table size 720 mm x 590 mm ram size 450 mm x 295 mm table height above floor 735 mm ram stroke 12 - 140 mm slide adjustment travel 100 mm Installation height max. 400 mm Clamping spigot bore Ø 40 mm Stroke rate 43/86 strokes/min. Motor power 4.4/7.5 kW drive power 400 Volt 50 Hz. - Table height adjustment with 2 support spindles - Drive with gear reducer - 2- motor speeds - pneumatic clutch-brake combination ORTLINGHAUS - movable screen, protective screen BLACK - overload protection with crushing plate - automatic central lubrication - 2-manual control panel and electric foot switch for stroke release - control cabinet fixed to the machine - Control cabinet for protective screen adjacent L x W x H 400 x 200 x 600 mm space requirement of the press L x W x H 2300 x 1500 x 2650 mm weight of the press approx. 5,5 ton. good condition

Condition: used, Year of construction: 1997, pressure 63 t throat 315 mm stroke 8 - 120 mm no. of strokes 56/90 Hub/min daylight (stroke down, ram adjustment above) 445 mm ram adjustment 70 mm table surface area 800 x 630 mm hole in the table 280 mm T-slots at tabel 3 clamping plate 790 x 610 mm clamping plate thickness 65 hole in clamping plate 120 mm t-slots at bolster plate 2 ram surface 500 x 400 mm T-slots at ram 2 width of T-slots 22 mm total power requirement 17,5 kW weight of the machine ca. 6 t dimensions of the machine ca. 1,52 x 2,12 x 2,84 m Machine equipment: - Circulating lubrication - Ratchet for ram adjustment - Break plate (new) - Clamping plate - Footswitch - Cam switch mechanism - safe for hand inlay work - CE documentation + declaration of conformity The following work should be carried out on the machine: Celq Nrqsvu E Hyj Tjgt - new separate control cabinet with touch panel and ABB safety control - Work area enclosure with ESPE - A current UVV test and braking time measurement is carried out before delivery

Condition: used, Year of construction: 1971, machine/vehicle number: 7130, Capacity: 60 ton Cgelq Nreuqcxnsq Tst Throat depth: 275 mm Ram stroke: 5 -100 mm Shut height (stroke down, adjustment up): 375 mm Table surface area : 740 x 470 mm Number of strokes: 14 - 100 s.p.m. Required power: 10 kW Dimensions L x W x H: 2.300 x 1.500 x 3.000 mm Weight of machine approx.: 3,5 ton

Condition: new, Year of construction: 2024, Functionality: fully functional, total height: 2,430 mm, drop-through hole in table: 150 mm, table width: 850 mm, table length: 570 mm, overall weight: 5,000 kg, pressing force: 60 t, Eccentric C-frame press 60 ton. NEW machine Pressing force 60 ton. NOMINAL LOAD CAPACITY POINT 4 mm MAX. HEIGHT OF CLOSED DIE 310 mm STROKE ADJUSTMENT (SEMI-AUTOMATIC) 20/100 mm Speed 60 SPM Cgolq Nrqjvnq Tls Tjt Diameter of die mounting hole 50 mm Throat depth (hole center to the back) 275 mm Ram adjustment STROKE 80 mm RAM DIMENSIONS 580 x 350 mm Table dim. 850 x 570 mm DIAMETER OF THE TABLE HOLE 150 mm TABLE HEIGHT FROM THE FLOOR 795 mm Weight approx. 5,000 kg Height 2430 mm Depth 1370 mm Width 1265 mm MOTOR POWER 5.5 KW

Condition: new, Year of construction: 2025, drop-through hole in table: 180 mm, table width: 660 mm, table length: 860 mm, stroke adjustment: 110 mm, pressing force: 80 t, power: 5.5 kW (7.48 HP), punching force: 80 t, warranty duration: 24 months, Equipment: safety light barrier, STANDARD FEATURES: • STEEL CONSTRUCTION BODY • 4-SURFACE BEARING RECORD • DUCTILE IRON CONNECTING ROD AND ANGLE BEARINGS • CRANKSHAFT AND TRANSMISSION SHAFTS 4140 STEEL STEEL • CENTRAL SYSTEM FULLY AUTOMATIC GREASE LUBRICATION • PNEUMATIC CLUTCH AND BRAKE COMBINATION • COMPLIANT WITH CE SAFETY DIRECTIVES • DOUBLE COIL SAFETY VALVE • MANUAL ADJUSTABLE STROKE • AUTOMATIC ADJUSTABLE STROKE BETWEEN 150-300 TONS • PHOTOCELL PROTECTION CURTAIN • PLC CONTROL SYSTEM • TOUCH LCD SCREEN BETWEEN 150-300 TONS • DOUBLE-HAND PEDAL CONTROL SYSTEM • MECHANICAL INSURANCE SYSTEM • HYDRAULIC INSURANCE SYSTEM BETWEEN 200-300 TONS • EMERGENCY REVERSE MOTOR MOVEMENT • IN ACCORDANCE WITH OCCUPATIONAL SAFETY REGULATIONS • VIBRATION PREVENTIVE WEDGE • COUNTRY OF ORIGIN: TURKEY • WARRANTY PERIOD: 24 MONTHS • WE PRODUCE C TYPE ECCENTRIC PRESSES FROM 5 TONS TO 250 TONS. TECHNICAL SPECIFICATIONS: PRESSURE (TON) 80 STROKE ADJUSTMENT RANGE (MM) 10-110 NUMBER OF STROKES PER MINUTE (D/MIN-RPM) 50 RAM - REGULATION RANGE (MM) 70 RAM - TABLE DISTANCE (MM) 425 LOWER TABLE DIMENSIONS (MM) 660X860 LOWER TABLE HOLE DIAMETER (MM) 180 Celq Nrevtx H Rjq Tegt RAM TABLE DIMENSIONS (MM) 300X480 RAM MOLD EYEBALL DIMENSIONS (MM) 40 MOTOR POWER (KW) 5.5 WEIGHT (KG) 3700 MACHINE DIMENSIONS (MM) (H - W - L ) 2350X1600X1350 • SINCE WE ARE A MANUFACTURER, TECHNICAL SPECIFICATIONS CAN BE CHANGED IF REQUESTED.

Condition: used, Single-column eccentric press WEINGARTEN type EV 63 Machine. No. 738 / 61 Year of construction 1962 Pressure capacity 63 ton. throat 260 mm Table surface 630 x 530 mm Table opening Ø 210 mm ram surface 315 x 260 mm Plunger stroke adjustable 8-100 mm Plunger adjustment 63 mm Installation height max 450 mm Cgelq Nrqek S Htxe Tot Stroke rate 115 strokes / min. Compressed air requirement min. 4.5 bar Motor power 4 kW Mains connection 380 Volt, 50 Hz Table height above floor approx. 750 to 900 mm - Electric lift release via foot switch or two-hand operation - Overload protection by breaker plate - Clutch/brake combination with WEINGARTEN friction threaded clutch with TDC overrun protection - Front crankshaft support bearing - Press table height-adjustable via 2 threaded spindles - Manual central grease lubrication - Control cabinet adjacent - UVV for manual insertion work Space requirement L x W x H 1750 x 1600 x 2430 mm Weight 4.5 tons good condition

Condition: new, Year of construction: 2025, drop-through hole in table: 140 mm, table width: 590 mm, table length: 800 mm, stroke adjustment: 100 mm, pressing force: 60 t, ram bore: 40 mm, power: 5.5 kW (7.48 HP), punching force: 60 t, warranty duration: 24 months, Equipment: safety light barrier, STANDARD FEATURES: • STEEL CONSTRUCTION BODY • 4-SURFACE BEARING RECORD • DUCTILE IRON CONNECTING ROD AND ANGLE BEARINGS • CRANKSHAFT AND TRANSMISSION SHAFTS 4140 STEEL STEEL • CENTRAL SYSTEM FULLY AUTOMATIC GREASE LUBRICATION • PNEUMATIC CLUTCH AND BRAKE COMBINATION • COMPLIANT WITH CE SAFETY DIRECTIVES • DOUBLE COIL SAFETY VALVE • MANUAL ADJUSTABLE STROKE • AUTOMATIC ADJUSTABLE STROKE BETWEEN 150-300 TONS • PHOTOCELL PROTECTION CURTAIN • PLC CONTROL SYSTEM • TOUCH LCD SCREEN BETWEEN 150-300 TONS • DOUBLE-HAND PEDAL CONTROL SYSTEM • MECHANICAL INSURANCE SYSTEM • HYDRAULIC INSURANCE SYSTEM BETWEEN 200-300 TONS • EMERGENCY REVERSE MOTOR MOVEMENT • IN ACCORDANCE WITH OCCUPATIONAL SAFETY REGULATIONS • VIBRATION PREVENTIVE WEDGE • COUNTRY OF ORIGIN: TURKEY • WARRANTY PERIOD: 24 MONTHS • WE PRODUCE C TYPE ECCENTRIC PRESSES FROM 5 TONS TO 250 TONS. Cgjlq Nrqsvtx D No Tot TECHNICAL SPECIFICATIONS: PRESSURE (TON) 60 STROKE ADJUSTMENT RANGE (MM) 10-100 NUMBER OF STROKES PER MINUTE (D/MIN-RPM) 55 RAM - REGULATION RANGE (MM) 60 RAM - TABLE DISTANCE (MM) 400 LOWER TABLE DIMENSIONS (MM) 590X800 LOWER TABLE HOLE DIAMETER (MM) 140 RAM TABLE DIMENSIONS (MM) 275X450 RAM MOLD EYEBALL DIMENSIONS (MM) 40 MOTOR POWER (KW) 5.5 WEIGHT (KG) 3200 MACHINE DIMENSIONS (MM) (H - W - L ) 2300X1550X1300 • SINCE WE ARE A MANUFACTURER, TECHNICAL SPECIFICATIONS CAN BE CHANGED IF REQUESTED.

Condition: used, Single-column eccentric press WEINGARTEN type ER 63 Machine. No. 52A / 63 Year of construction 1963 Pressure capacity 63 ton. throat 280 mm Colq Njlb I Dzorq Tegt Table surface 630 x 530 mm ram stroke adjustable 8-100 mm ram adjustment 63 mm Stroke rate 65 strokes / min. Motor power 4 kW Mains connection 380 Volt, 50 Hz - Clutch/brake combination with WEINGARTEN friction threaded clutch - Electric lift release via foot switch - Wheel reduction gear - Overload protection by breaker plate - Front crankshaft support bearing Space requirement L x W x H 1500 x 1100 x 2500 mm Weight 4.5 tons good condition

Condition: used, Single-column eccentric press EBU Type 75 SKU Machine no. No. P 4598462 Year of construction 1962 Compressive force 75 ton. throat depth 300 mm Table surface 800 x 620 mm waste hole 325 x 225 mm Plunger surface 470 x 180 mm Clamping pin bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Plunger adjustment 80 mm Cjlq Nedzqltorq Tjgt Installation height max. approx. 420 mm Stroke rate 60 + 105 strokes/min. Motor power 4 kW Mains connection 380 Volt, 50 Hz. - Pneumatic clutch/brake combination EBU - Overload protection with breaker plate in ram - UNIDOR tool monitoring system, type APS MINI - mechanically driven gripper feed with belt straightener OSTERKAMP, type ZPN 200/350 - strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds due to 2 V-belt stages on the wheel transmission - Two-handed operation - Simple work area shielding for swinging open - Table height adjustment in lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and control panel for tool monitoring adjacent - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons good condition

Condition: used, Single column eccentric press MÜLLER GEFREES type 60 SV DK (identical in construction ExP60) Machine No. 5250686 Year of construction 1986 As good as new condition pressure force 60 ton. throat 280 mm table surface 740 x 560 mm ram area 385 x 200 mm drop-through hole in table 300 x 200 mm table surface intermediate table plate 740 x 560 mm drop-through hole in table intermediate plate Ø 103 mm thickness of intermediate table top 70 mm clamping spigot hole 40 mm Table height above floor 815 mm (with intermediate table top) Cgslq Nei A A Tbsrq Tet Installation height max. 275 (with intermediate table top) Installation height max. 345 (without intermediate table top) Stroke adjustment 10-90 mm Plunger adjustment 60 mm Stroke rate 100 strokes/min. Motor power 3 kW drive power 380 Volt, 50 Hz - mechanical rotary wedge clutch with pneumatic control - spring-loaded single-jaw brake controlled via cam disk - stroke release via pneumatic foot switch - overload protection with crushing plate in ram - table height adjustment via 2 threaded spindles - manual grease central lubrication BEKA Schmiertechnik - Operating instructions and pneumatic diagram available space requirement L x W x H 1400 x 1100 x 2200 mm weight 3,4 ton. very good condition, as new