Used Eccentric presses double column for sale (38)

Condition: used, Year of construction: 1984, Pressure total: 600 ton Ram stroke: 762 mm Slide adjustment: 406 mm Shut height (stroke down, adjustment up): 1322 mm Free frontal opening L-R: 3700 mm Table surface area : 3350 x 2134 mm Slide area: 3350 x 2134 mm Die cushion capacity in table: 180 ton Die cushion stroke: 305 mm Bo Ia Uouqdizjnxiswl Ejector in ram: 60 ton Ejector stroke in ram: 230 mm Number of strokes: 16 s.p.m. Required power: 90 kW Weight of machine approx.: 185 ton Standard configuration Cushion in table pneumatic Extended machine accessories die loading charts for tool changeABB Handling robots for loading and unloading presses

Year of construction: 1997, Condition: used, Force: 320 tons Type: SAR320 Table: 1950x1100 Ram: 1650x1100 Bj Ia Unxjctikvsijwl Windows: 800mm Strke: 20-102mm Strokes /minute: 20-120 Requested power: 90 KW Weight: 62 tons Height: 4800mm The machine will be reconconditioned with new electric

Year of construction: 1957, Condition: used, pressure 720 t stroke 15 mm Bwo Ia Unxjh E Er Seiel total power requirement 3 kW weight of the machine ca. 5 t dimensions of the machine ca. 1300 x 1800 x 2200 m

Condition: new, Year of construction: 2024, Functionality: fully functional, installation height: 400 mm, table width: 1,000 mm, table length: 830 mm, pressing force: 135 t, EXNER New Double column press - Eccentric press DEXRH 135/1000/1 Bwe Ia Unsup Sqkjxijl Year of construction 2024 Nominal pressure capacity 1,350 kN Dimensions Clamping plate width depth 1,000 x 830 mm mm T-slot clamping plate 22 mm Column width 1,050 mm Ram size Width Depth 1,020 x 740 mm T-slot ram 22 mm Centering groove ram width 30 mm depth 15 mm mm Ram adjustment max.100 mm Stroke rate with infinitely variable drive from 30 1/min to 100 1/min. Stroke adjustment from 20 mm to 140 mm

Year of construction: 1976, Condition: good (used), Ceramic press Bo Ia Unxogxf N Hoiewl In good condition

Condition: ready for operation (used), Year of construction: 1985, Functionality: fully functional, machine/vehicle number: 84/20.5917, ram adjustment: 160 mm, table width: 1,600 mm, table length: 1,600 mm, ram stroke: 250 mm, pressing force: 250 t, TECHNICAL DETAILS Total pressing force: 250 t Stroke: 70 / 250 mm Adjustment: 160 mm Ejector force: 20 t Bo Isu Unc Ssa Unxiowl Ejector stroke: 10 mm Control type: Siemens S7 Installation height Bottom stroke, top adjustment: 520 mm Dimensions Distance between the uprights at the side: 1,300 mm Table clamping surface: approx. 1,600 x 1,600 mm Ram clamping surface: approx. 1,600 x 1,600 mm Performance and speed Number of strokes: 0 - 50 min-¹ Power requirement: 33 kW Roller feed Belt width: 1,250 mm Belt thickness: 0.3 - 1.6 mm MACHINE DETAILS Height above floor: approx. 5,500 mm Machine weight: approx. 58 tons

Condition: used, pressure 200 t throat - mm stroke 250 mm Table dimensions 2420 x 840 mm ram surface 1850 x 650 mm dayligth 500 mm ram adjustment 110 mm Bwe Ia Unsgk Rfzsxiel distance between columns 1900 mm table height 170 mm no. of strokes 25 - 45 Hub/min total power requirement 22 kW dimensions of the machine ca. 2550 x 2370 x 3820 mm weight 30 t - pneumatic clutch - press safety valve, Herion - cam switch, Balluff - chain break monitoring - hydr. overload, Hydac - motor. alide adjustment with digital display - separate control cabinet with safety control ABB - separate two-hand control panel with foot switch - slidable side protective doors - front protection by light barriers vertical + horizontal The machine shown and described above is safe for hand inlays. The machine is also in anorther variant or also can be used as an automatic feeder. Equipment possible according to customer agreement.

Condition: reconditioned (used), Year of construction: 1983, Functionality: fully functional, Specification: Rated pressure 50 tons Slide stroke 7-80 mm Speed 75-300 strokes/min Slide adjustment 50 mm Table dimensions 500 x 500 mm Passage between columns 400 mm Weight 8500 kg Press equipped with mechanical jaw feeder - ELMEA PM132 - Year of production of the feeder: 2004. - For high speed and precision (0.02 mm) operation. - Speed up to 1000 strokes/minute for short feeds. - Acquires motion from the press shaft by driving a gear wheel with alignment joints. Rotary motion is converted to straight-alternative motion by a crank/crank system. - Adjustment of the feed length is achieved by an accurate step screw. - The clamp opening can be adjusted to accommodate belt thickness. It can also be set up for remote control operation. - It has an emergency stop sensor for hooking into the tool and is equipped with a kinetic joint that reduces the feeding angle from 180 to 120 or 90 degrees, increasing speed during feeding. The press has been professionally refurbished by Service BTC Maszyny Stolarczyk - New touchscreen control panel and PILZ safety controller Bwo Ia Ustq Hqajnxiol - New lubrication pump and hydraulic fuse - Warranty 6 months. - Location of the machine: 97-410 ZŁOBNICA, POLAND. - Ready for delivery.

Condition: refurbished (used), ECCENTRIC PRESS SGP TYPE : PEZZ 500/1700/1000 PRESSURE : 500t DOWN TABLE DIMENSIONS: 1700x1000mm LENGTH OF STROKE: 20-153mm Bwo Ia Unxshqqnzjiol DISTANCE BETWEEN RAM -TABLE: Min 700mm , Max 800mm WEIGHT: 40.000 kgr MADE IN AUSTRIA

Condition: used, pressure 160 t dayligth 600 mm Bwj Iascgqvps Unxisl stroke 25 - 150 mm table surface area 1500 x 900 mm ram surface 1500 x 900 mm ram adjustment 100 mm daylight between the columns 1500 mm daylight between the side columns 400 x 200 mm distance between columns 1680 mm weight of the machine ca. 15 t dimensions of the machine ca. 2,7 x 1,8 x 4,4 m

Condition: used, Pressure: 160T Length of stroke: 30 - 180 mm Down table size: 800x900 mm Bwe Ia Unj Dviwjxiel Back pressure: WITH BACK PRESSURE Technical characteristics: WITH AIR CLUTCH New electric system

Condition: used, pressure 160 t distance between columns mm stroke 200 mm table surface area 2040 x 840 mm throat 450 mm no. of strokes 30 - 55 Hub/min dayligth 450 mm ram surface 1700 x 800 mm ram adjustment 100 mm Bo Ia Ustqm Dgjnxiowl total power requirement 11 kW weight of the machine ca. 21,1 t dimensions of the machine ca. 2,2 x 1,94 x H 3,66 m - safe for hand inlay work - Conversion to West - Photoelectric barrier

Year of construction: 1986, Condition: used, pressure 40 t dayligth 250 mm stroke 8 - 50 mm table clamping surface LxW 620 x 450 mm table height over floor 980 mm no. of strokes 85 - 500 Hub/min distance between columns 680 mm ram - range of adjustment 50 mm number of T-slots 4 ram surface mm total power requirement 8 kW dimensions of the machine ca. 2,3 x 2,2 x 2,8 m weight of the machine ca. 5,8 t - Unidor Tool monitoring - Kaiser gripper feed, band width 180 mm, feed length 150 mm - Kaiser scrap shear on the left side - soundproof cladding Be Ia Unxjcb T Tweiewl