Used double cross cut saws for sale (43)

Condition: ready for operation (used), Year of construction: 2018, Optimizing Cross-Cut Saw manufactured in 2018. This WEINIG DIMTER Opticut S90 features a saw blade diameter of 500 mm and a maximum cutting height of 120 mm. It accommodates input lengths from 400 to 6,300 mm and widths from 20 to 300 mm. If you are looking to get high-quality cutting capabilities, consider the WEINIG DIMTER Opticut S90 machine we have for sale. Contact us for further details. • Saw blade • Diameter: 500 mm • Bore: 30 mm • Adjustable saw blade speed: 40–100% via frequency converter • Workpiece capacity Hfslozuhdwohccqrsk • Input length (min/max): 400–6,300 mm • Width (min/max): 20–300 mm • Thickness (min/max): 10–120 mm • Maximum cutting height: 120 mm • Minimum cross-section: 20 x 10 mm • Maximum cross-section 1: 215 x 120 mm • Maximum cross-section 2: 300 x 40 mm • Permissible timber curvature: max 2 mm/m or 8 mm over entire length • Table inclination: 10° • Motion and accuracy • Positioning speed (reverse stroke): max approx. 180 m/min • Positioning speed (forward stroke): max approx. 60 m/min • Positioning accuracy: +/- 0.1 mm • Motors and power • Pusher motor power: 5.1 kW • Saw motor power: 7.5 kW • Total electrical load: approx. 15 kW • Control and interface • Control unit: OptiCom Pro with 18.5" touch screen • Screen resolution: 1366 x 768 pixels • Protection class (front): IP65 • Interface: USB port and Ethernet network connection • Data format: CSV (ASCII) for import/export • Utilities and environment • Voltage: 400 V / 50 Hz • Operating pressure: 6–8 bar (min.) • Air consumption: approx. 250 NL/min • Extraction connection: diameter 125 mm • Required extraction performance: speed approx. 30 m/s; volume approx. 1,300 m³/h • Noise level (idling): ≤ 85 dBA

Condition: excellent (used), CATALOGUE NUMBER 7065 TECHNICAL DATA - Max. saw blade diameter: 300 mm - Spindle diameter: 30 mm - Blade guards: 2 pieces Hjlszulu Tshccqrjfk - Pneumatic cutting (up/down blade movement) - Saw units adjustable at 45° - Manual spacing adjustment of the saw units - Min. cutting length at 90°: 220 mm - Max. cutting length at 90°: 2820 mm - Cutting width: 110 mm - Cutting height at 90 degrees: 90 mm - Pneumatic clamps: 2 pieces - Foot switch - Material support - Main motor: 2×1.6 kW - Dimensions (L/W/H): 3620x1100x1250 mm - Weight approx. 500 kg – Unpainted – Tilting saw units – Used saw, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR depending on the exchange rate 4.2 EUR (Prices may change with higher fluctuations)

Condition: excellent (used), Catalog number: 8051 TECHNICAL DATA - max. blade diameter: 300mm - spindle diameter: 30mm Hfolhcszrwrfecqrok - blade guards: 2 pcs - pneumatic cutting (blade movement: up/down) - sawing units adjustable at a 45° angle - manual adjustment of sawing unit spacing - min. cutting length at 90°: 280mm - max. cutting length at 90°: 3020mm - cutting height at 90 degrees: 90mm - pneumatic clamps: 2 pcs - control pedal - material support - main motor: 2 x 2kW - dust extraction nozzle diameter: 2 x 60mm - dimensions (L/W/H): 3520x900x1450mm - weight approx. 500kg ADVANTAGES – unpainted – tilting sawing units – DTR documentation Net price: 15900 PLN Net price: 3790 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to exchange rate fluctuations) – used saw, very good condition

Condition: used, Year of construction: 1973, Max. cutting length 3200 mm (distance from 1st to 3rd saw blade) with left-side circular saw tiltable up to 45°. Cutting capacity 2200 x 2500 mm. 3 motors, each 4.5 kW. Both cross-cut saws tiltable from 45° to 90°, each with a scoring motor. All three saws up to 400 mm diameter. Minimum cutting width 210 mm. Both scoring saws pneumatically moved forward and back with vacuum suction cups for panel fixation. Storage location: Nattheim. Hfslhccqevvkm Iersk

Condition: as good as new (ex-display), Year of construction: 2018, The TAC CNX is a fully automatic machine that can cross cut straight or angled, coupled with a CNC vertical drilling unit and vertical hopper feed loading leading device. This means a combined operating cycle of feeding, drilling and cutting with no manual operator intervention. The TAC can also just be used for crosscutting if so required. The saw unit cutting angle automatically adjusts to the required angle from the program, while the drilling group is controlled in 3 axis with a 5 spindle point to point head. Programming is quick and simple thanks to the integrated colour graphic touch screen controller. The saw and drilling units are both located in an enclosed safety cabin with electrically interlocked doors, this giving the operator the highest level of protection. The machine is ideal for cutting and drilling for sofa / chair frame rails / parts, general furniture parts, plastics and / or aluminium extrusions. Specification Holhcov Aalyecqrsfk - Heavy duty thick steel monobloc frame electro welded. - Automatic vertical loading system with length capacity upto 1350mm (longer on request). - Feeding via self centering grippers. - Special grippers to allow loading of / feeding of 2 pieces together (on top of each other). - Automatic step advancement movements of the material to be drilled / cut controlled by the NC on the X axis. Programmable movement from 1 to 1050mm, advancement speed max 60 mt/min (adjustable). Special 'macro' for back movement of the piece for material saving. - Outfeed motorised exit conveyor belt for cut / drilled parts 600mm long x 75mm wide. - Saw unit with 4kw motor/ 2800mm adjustable through inverter up to 4000 rpm. Automatic rotation of the sawblade +/- 60 degrees controlled by the CN. - 5 spindle in line vertical point to point drilling unit controlled on 3 axis by CN. - Easy programming with dedicated software with 12" screen an operator interface - Total protection of the the working cabin, interlocked doors with inspection windows. - In conformity with CE safety rules. Working dimensions - Length feeding in one operation 1 to 1000mm (can be increased by setting more positioning steps of the loader. - Width 10 to 200mm cutting at 90 degrees. - Width 10 to 150mm cutting at 34 degrees. - Thickness 10 to 80mm. - Productivity approx 3 seconds per operation (feeding, drilling, cutting = 9 seconds) Complete with optional Vertical hopper feed loader with 3m length capacity Year - 2018 CE Condition - As new ex display [ only used for demonstrations.]

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): Helhsq Ii Dljccqrsfk spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Condition: used, Hüllhorst DH54S Machine number: 03974 Circular saw drive: a) 2 motors: 5 HP each b) Speed: 3000 rpm c) Circular saw diameter: 400 mm d) Circular saw blade thickness: 2.6 mm e) Circular saw bore: 35 mm Working range: a) Standard machine: 2200 mm cutting depth and 2200 mm cutting width Hslhccexrzfvjqrsfk b) Custom cutting depth: up to 2500 mm c) Custom cutting width: up to 3000 mm d) Minimum cutting width: 210 mm e) Maximum cutting height: 100 mm

Condition: good (used), Code: 0246 Brand: OMGA Model: TR 2B - NC - CE Standard Automatic double mitre saw with numerically controlled positioner for cutting frames, wood profiles, furniture, wooden window frames, doors, plastic materials, and various - CE standard Holhcsxztydecqrefk Technical data: Numerically controlled positioner: allows cutting lists to be stored and the moving head to be positioned automatically Cutting length 3500 mm Blade diameter 350 F 30 mm Motors each 2,2 Kw Rpm 3000 Cutting width 170 mm Cutting height at 90° 102 mm N° 2 vertical pneumatic pressers Suction mouth diameter 80 mm Compressed air 6-7 bar Overall dimensions mm 4400 x 1000 x 1500 h Weight kg 600

Condition: good (used), Code: 0370 Brand: HAFFNER - GERMANY Model: DGS 187 - CE Standard Double mitre saw with tilting blades for cutting wood, aluminum, pvc and various materials - CE Standard Technical data: Blades diameter mm 500 F 30 N° 2 motors each Kw 2,2 - Rpm 2800 Cutting length max mm 3400 Cutting length min mm 230 Blades inclination 45° - 90° Electronic positioning cutting length of left cutting unit Hydropneumatic saw feed Pneumatic workpiece clamping Control panel double buttons Electronic head positioning programmer N° 2 suction ports diameter mm 120 Compressed air 6 bar Overall dimensions mm 4600 x 1300 x 1650 h Hfslhcjuiwqhscqrok Weight kg 550

Condition: good (used), Code: 0323 Brand: SML - ITALY Model: SILVER P 35/EL - CE Standard Electronic double mitre saw for cutting wood, frames, pvc, aluminium, plastics and various materials - CE Standard Technical data: Oleo-pneumatic head lowering Max cutting length mm 5200 Min cutting length mm 50 Cutting height mm 100 Max cutting width mm 170 Blade diameter mm 350 F30 Motor Hp 3 each - Rpm 3000 Electronic head positioning programmer Bimanual blade lowering control Pneumatic pressures for workpiece clamping N° 2 suction ports diameter mm 60 Working pressure 7 bar Hfolhcotu Hy Escqrok Overall dimensions mm 6300 x 1000 x 1600 h Weight kg 1100

Condition: used, Hüllhorst double miter saw in good, used condition. The miter angle cannot be adjusted on this machine. Year of manufacture unknown. Hfolezpfk Rjhccqrsk The double miter saw has been used reliably for many years in the production of moldings and is still connected to the power supply. The machine is being sold as part of the liquidation of our carpentry business. Collection price – delivery possible upon request. The sale is made excluding any warranty for defects. Liability for intent, gross negligence, and damages resulting from injury to life, limb, or health remains unaffected. Claims for defects that have been fraudulently concealed also remain unaffected. An inspection of the machine is possible by arrangement.

Condition: used, functionality: fully functional, On offer: Miter saw, OMS FC 300 R Super – 1700 W, 230 V, with dust extraction The machine is used, has undergone technical inspection, is in full working order, and is ready for operation. Before purchase, it can be started and thoroughly inspected at our company's premises. The machine's greatest advantage is its complete, compact design with an original OMS B 91 A base and integrated dust extraction system. 230 V power supply, angle adjustment from -45° to +45°, motor brake, and a mechanism assisting the saw head's return ensure convenient and repeatable operation. Specifications: • Manufacturer: OMS • Model: FC 300 R Super • Year of manufacture: 1998 • Power supply: 230 V, 50 Hz • Saw motor power: 1700 W • Blade diameter: 300 mm • Blade speed: 3000 rpm • Maximum dimensions of the workpiece at a 90° angle: 85 × 130 mm (height × width) • Angle adjustment: from -45° to +45° • Scale for setting the cutting angle • Motor brake • Blade guard • Mechanism assisting the cutting unit's return • Two-piece aluminum fence • Base with integrated dust extraction: OMS B 91 A • Dust extraction motor power: 495 W • Dust extraction power supply: 230 V, 50 Hz • Filter bag located inside the base • CE marking • Overall dimensions without extension tables: 85 × 81 × 160 cm (length × width × height) Application: • Cross-cutting solid wood elements • Trimming boards, timbers, moldings, and profiles to length • Making straight and miter cuts • Preparing components for the production of frames, moldings, furniture, and carpentry • Preparing material for further processing Additional information: • The photos show the actual condition of the offered machine • Free machine operation training at our company's premises • The price stated in the auction applies to export sales/intra-community supply with a VAT rate of 0%; in the case of domestic sales, 23% VAT must be added Financing and transport: Hfolhccszqa Srsqrek • We arrange transport with our own MDD fleet or through external carriers • We help in obtaining a lease or lease financing • The delivery cost depends on the destination and the method of transporting the machine MDD wood machines is a company specializing in the sale and service of used woodworking machines. We offer professional advice, technical inspections, repairs, and machine preparation for operation. We support customers both before and during the subsequent operation of the equipment. We regularly update our offer. If you are looking for a machine that we do not currently have, we can help you find and source it. We offer machines from manufacturers such as: SCM, SAC, Martin, Hofmann, Casadei, Kuper, Osama, Altendorf, Casolin, Sicar, Omga, Maggi Junior, Brandt, Felder, Weinig, Olimpia, Impianti, Italpresse, Orma, Manni, Kolmag, Centauro, Meber, Ogam, Cosmec, Unilev, Volpato, Safo, Atlas Copco, Samco, Fini, ABAC, Stema, Stromab, Omec, Bottene, Prodeco, and many others. Contact us for more information, to schedule a machine demonstration, and to find out the transport costs. MDD wood machines – sales and service of machines for the woodworking industry.

Condition: used, Year of construction: 1991, machine/vehicle number: DS11, functionality: fully functional, power: 9 kW (12.24 HP), saw blade diameter: 370 mm, Equipment: saw blade guard, Manufacturer: Bäuerle Type: DS11 Year of manufacture: 1991 Power: 2 x 4.5 kW Saw blade diameter: 370 mm Hfjlhoy Tphkeccqrok Length measuring system (automatic): Shortest dimension: 225 mm Longest dimension: approx. 1900 mm

Condition: like new (used), Year of construction: 2014, functionality: fully functional, maximum blade diameter: 350 mm Heljzmwl Uohccqrjfk minimum blade diameter: 340 mm two motors, 3 kW each 400 V year of manufacture: 2014 left unit fixed, right unit movable pneumatic clamping system maximum distance between blades: 2800 mm minimum distance between blades: 600 mm weight: approximately 800 kg

Condition: used, Double saw, OMS 11/26 mitre saw Hslhccezkh Dpsqrjfk

Condition: good (used), Code: 0252 Brand: MA BREVETTI Model: JUNIOR 275 Pneumatic double mitre saw for 45° + 45° cuts at both ends, in frames and mouldings of any shape and kind Technical data: Blade diameter mm 275 F30 Max cutting capacity: Width 70 mm - Height 90 mm Production rate approx. 700/800 cuts Motors n° 2 - 2 Hp each - rpm 2800 Power supply V.380/50 Operating pressure 6 bar Suction port diameter 100 mm Overall dimensions mm 850 x 700 x 1400 mm Weight kg 265 Hfelhccox Au A Neqrsk

Year of construction: 1977, condition: refurbished (used), I sell the double mitre saw Rapid DGS, year 1977. Tilting heads Drilling front heads on each side included Very good condition. Hfslhccjd N Rb Dsqrok Available immediately.

Condition: excellent (used), Double miter saw Pertici Haffner DGS180 Cutting length: 3300 mm Cutting width: 140 mm Two adjustable cutting angles Maximum saw blade diameter: 330 mm Pneumatic material clamps Helhccqsxg Hanorjfk 3 operating modes

Condition: excellent (used), functionality: fully functional, Double miter saw OMS INVINCIBLE OK 330 Maximum cutting length: 3000 mm Maximum cutting width: 140 mm Units adjustable at 45°/-45° Motor power: 2×3HP ~2.2kW Saw blades: 330 mm Hfslhccoylm Nueqrok Pneumatic vertical material clamp

Condition: good (used), functionality: fully functional, OMGA Radial 700 Radial Arm Saw Max cutting width at 90°: 700 mm Max cutting height: 110 mm Saw unit adjustable for angle in two planes Hslsyym Afohccqrsfk Saw blade speed: 3000 rpm Main motor power: 2.61 kW Pneumatic feed of the saw unit

Condition: excellent (used), Double mitre saw OMS INVINCIBLE OK 330 Maximum cutting length: 3000 mm Helhjydc Tmjccqrefk Maximum cutting width: 140 mm Units adjustable to an angle of 45/-45° Motor power: 2×2.2 kW Saw blades: 330 mm Pneumatic vertical material clamp

Condition: excellent (used), functionality: fully functional, Double mitre saw OMS INVINCIBLE OK 330 CE Maximum cutting length: 3000 mm Maximum cutting width: 140 mm Heads adjustable at angles 45/-45° Motor power: 2×1.8 kW Saw blades: 330 mm Holhceyz Tizjcqrofk Pneumatic vertical material clamp

Condition: used, Year of construction: 2010, total length: 1,500 mm, total width: 900 mm, total height: 1,700 mm, Colour: Grey Weight: 500 kg Price: On request - Year: 2010 - Documentation available: No - CE certificate present: No - Serial number: 6.719 - Main motor power [kW]: 3.1 - Max. cutting depth [mm]: 120 - Max. cutting height [mm]: 90 - Max. saw blade diameter [mm]: 350 - Arbor saw blade diameter [mm]: 30 - Voltage [V]: 400 - Current consumption [A]: 7.13 - Fuse [A]: 16 - Power [kW]: 3.1 - Transport dimensions: 1500mm x 900mm x 1700mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Hfslhccqeyna Aaerok Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2014, total length: 5,200 mm, total width: 900 mm, total height: 1,700 mm, Colour: Grey Weight: 500 kg Price: On request Hslheyna Ayoccqrefk - Year: 2014 - Documentation available: No - CE certificate present: No - Serial number: 8.687 - Main motor power [kW]: 3.1 - Max. cutting depth [mm]: 120 - Max. cutting height [mm]: 90 - Min. saw blade diameter [mm]: 350 - Max. saw blade diameter [mm]: 350 - Arbor saw blade diameter [mm]: 30 - Voltage [V]: 400 - Current consumption [A]: 6.53 - Fuse [A]: 16 - Power [kW]: 3.1 - Transport dimensions: 5200mm x 900mm x 1700mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1999, functionality: unexamined, input voltage: 380 V, input current: 9 A, input frequency: 50 Hz, type of input current: three-phase, saw blade diameter: 300 mm, saw blade bore: 30 mm, Double saw with OMGA feeder Hjlhszcv Iuoccqrefk