Used Atlas-Copco Xas 46 Ddg for sale (371)

Condition: good (used), For sale: a mobile Atlas Copco XAS 60 screw compressor with a Deutz F2L 511 diesel engine. The unit has only 613 operating hours since new. The engine is in very good condition – it starts easily and runs properly. The compressor was imported from Germany. It has not been used for about fifteen years, and the compressor's screw element has seized. We attempted to repair it, and the unit was reassembled, but it currently only generates a pressure of approximately 4 bar. For this reason, it is being sold as damaged, for further repair. Ijdpfozv Ei Hex Ah Ujig It may be an interesting proposition for someone who will undertake the repair of the compressor, or as a source of parts, especially the well-maintained Deutz F2L 511 engine. Engine data: * Manufacturer: Deutz * Type: F2L 511 * Power: 25 kW / 34 HP * Speed: 2800 rpm * Operating hours: 613 hours * Engine is functional, starts and runs properly The visual condition is appropriate for the age of the unit – visible signs of use, storage, and localized corrosion.

Condition: ready for operation (used), functionality: limited functionality, Year of construction: 2011, operating hours: 1,192 h, Equipment: soot filter, Compressor Atlas Copco XAS 67 DDG, built in 2011, 1192 operating hours, volume flow 3.5 m³, emergency power 12.5 kVA, connections 1 x 230 volts, 2 x 400 volts, serial number YA3062566B0165583, approval available, the fuse blows when the emergency power is switched on, downstream soot filter SMF-MR Ijdsv Rbufepfx Ah Ujig

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 1,608 h, Atlas Copco XAS 67 DDG compressor, manufactured in 2011, with 1608 operating hours, a flow rate of 3.5 m³, emergency power output of 12.5 kVA, and connections for 1 x 230 volts and 2 x 400 volts. Serial number: YA3062565B0165591. Approval documentation is available. Iisdpfjzbiivjx Ah Usg

Condition: repair required (used), functionality: unexamined, fuel type: diesel, Year of construction: 2017, operating hours: 1,154 h, Atlas Copco XAS 68 DDG compressor, year of manufacture 2017, 1,154 operating hours, volumetric flow 3.5 m³, emergency power 12.5 kVA, connections: 1 x 230 Volt, 2 x 400 Volt, serial no. YA3064303H0461812, axle bent, compressor otherwise fully functional, ABE/registration available. Iijdpfx Ahsy Aktae Ujg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 1,680 h, Compressor Atlas Copco XAS 67 DDG, year of manufacture 2012, 1680 operating hours, volume flow 3.5 m³, emergency power 12.5 Kva, connections 1 x 230 Volt, 2 x 400 Volt, Ser.No.YA3062560C0250310 Iiodpfeu Dh Tlsx Ah Ujg

Condition: used, Year of construction: 2020, operating hours: 5,945 h,

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, DIESEL COMPRESSOR ATLAS COPCO XAS46DD after service! Compressor registered in Poland. Technical specifications: Iisdpfx Aex A T D Sjh Usg Output: 2.60 m3/min; Operating pressure: 7 Bar; Engine: DEUTZ F2M1011 Hours of operation: 1355 h!!! The compressor is fully functional, ready to work, with warranty. Net price: 13,500 PLN Gross price: 16,605 PLN

Condition: ready for operation (used), Year of construction: 2023, operating hours: 2,222 h, functionality: fully functional, machine/vehicle number: ya3064249n0867271, overall weight: 2,450 kg, fuel type: diesel, operating pressure: 14 bar, Equipment: type plate available, For sale is a powerful, mobile screw compressor, an Atlas Copco XAS 188-14 PACE S5. The machine is in good used condition and only shows the usual signs of wear and tear from use. The compressor is ideal for professional applications in sandblasting, abrasive blasting, construction, renovation, industry, and the operation of high-performance pneumatic tools. Thanks to the PACE technology, the required working pressure can be flexibly adjusted to suit the specific application. Technical data: Manufacturer: Atlas Copco Model: XAS 188-14 PACE S5 Operating hours: approx. 2,222 h Fuel: Diesel Engine: John Deere, 4-cylinder Isdpfx Aszzp N Ish Usig Engine power: 104 kW / approx. 141 hp Working pressure: 5–14 bar Air flow rate: up to approx. 10.9 m³/min Emission stage: Stage V Control system: Atlas Copco PACE Sound power level: 99 dB(A) Design: mobile compressor on a single-axle chassis Braked chassis with drawbar Emergency stop and electronic control system are available The compressor can be inspected and test-run by appointment.

Condition: used, Year of construction: 2022, ---- Data: Frame: Stationary Light type: LED Dimensions (L x W x H): 500 mm x 500 mm x 2200 mm Weight: 45 kg Mast type: Manual, vertical Iijdpfx Ajzkzc Sjh Ujg Maximum height: 3.5 m Power: 1 x 320 W Wind resistance: 50 km/h Mains frequency: 50 Hz

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, DIESEL ATLAS COPCO XAS 67 Compressor – Serviced! The compressor is registered in Poland. Technical specifications: Capacity: 3.60 m3/min; Operating pressure: 7 Bar; Ijdszwmlrjpfx Ah Uoig Year of manufacture: 2015; Engine: KUBOTA Operating hours: 1847h! The compressor is fully functional, ready for work, and comes with a warranty. Net price: 32,500 PLN Gross price: 39,975 PLN Below is a link to a video demonstrating the machine in operation.

Condition: excellent (used), Year of construction: 2019, Equipment: compressor, ATLAS COPCO XAS88 5.2m3 COMPRESSOR 2019 DIESEL compressor ATLAS COPCO XAS 88 after full service Technical data: capacity 5.20 m3/min; working pressure 7 Bar; production year 2019; KUBOTA engine mileage 1519h!!! compressor fully operational net price: 58800 zł Ijdpfx Aherdf Swo Ujig gross price: 72324 zł Below is a link to the video , showing the work of the machine

Condition: used, Year of construction: 2023, Atlas Copco XAS 58-7G Compressor Trailer, FIN: P0881834 * Kubota D1105-EF02 diesel engine * 18.2 kW / 24 hp * TEX 230PE H28 hammer * TEX 10PSKL hammer * TERRA Hammer TU 055R rock drill * Compressed air hose * Hose reel Compressor with generator, ATLAS COPCO XAS 58-7, Year of manufacture: 11/2023 Equipment: Construction compressor Atlas Copco MCT, Type XAS 58-7 G, with integrated generator 6kVA, socket: 2 x 360V / 1 x 230V. Unbraked chassis, adjustable in height, initial oil fill, crane eye, closed bottom tray, starter motor protection (SMP), overrun and parking brake, reversing automatic, spur gear, support leg (unbraked version), truck DIN tow hitch (400mm), lighting according to StVZO (German Road Traffic Licensing Regulations), operating permit. Accessories: Compressed air hammer Atlas Copco, Type TEX 10 PSKL, weight: 10.7 kg. Compressed air hammer TEX 230 PE, weight: 27 kg. Various pointed and flat chisels, asphalt chisel 115 mm wide, TERRA Hammer TU055R, TERRA compressed air hose, length approx. 15,000 mm, TERRA oiler. Original price: complete with accessories 28,000 € net. * New main inspections / safety checks or weight adjustments are available upon request. We will gladly assist you in obtaining export/transfer license plates, and we can also arrange for the transportation of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English and Russian! ---- No liability for printing and typographical errors, changes, prior sale and errors reserved! ---- Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the refurbishment and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. On 11,000 m², you will find a wide range of vehicles. Our corporate philosophy is characterized by fairness and reliability. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person to assist them in the purchase or sale of vehicles. See for yourself! Our services for you: Loading of vehicles We will gladly help you with loading your purchased vehicles. Organizing special transports We will gladly help you organize special transports. Short-term registration / export license plates We will gladly help you obtain export license plates/short-term registration. Iiodpfx Ahey Rv Ilo Ujg Handling customs formalities

Condition: excellent (used), functionality: fully functional, overall weight: 950 kg, color: yellow, fuel type: diesel, fuel tank capacity: 80 l, motor manufacturer: Deutz D2011L03, total length: 3,740 mm, total width: 1,410 mm, total height: 1,360 mm, power: 36 kW (48.95 HP), volume flow: 318 m³/h, operating pressure: 7 bar, pressure (min.): 4 bar, pressure (max.): 8.5 bar, noise level: 98 dB, Year of construction: 2016, operating hours: 1,190 h, next inspection (TÜV): 04/2025, machine/vehicle number: APP418299, Equipment: UVV, - Hood and body made of impact-resistant, robust polyethylene - Overrun and parking brake with automatic reverse function - Tool oiler - Choice of truck DIN towing eye or car ball head coupling, height-adjustable towing device Ijdpfxjtwz Ezj Ah Ueig Next pressure vessel test in accordance with Directive 87/404/EEC due in May 2026 If you have any questions, please contact us personally.

Condition: used, Year of construction: 2023, Atlas Copco XAS 58-7G Compressor Trailer, FIN: P0881834 * Kubota D1105-EF02 diesel engine * 18.2 kW / 24 hp * TEX 230PE H28 hammer * TEX 10PSKL hammer * TERRA hammer TU 055R earth drill * Compressed air hose * Hose reel Compressor with generator, ATLAS COPCO XAS 58-7, manufactured: 11/2023 Equipment: Construction compressor Atlas Copco MCT, type XAS 58-7 G, with integrated generator, 6 kVA, sockets: 2 x 360V / 1 x 230V. Unbraked chassis, height adjustable, initial oil filling, crane eye, closed bottom pan, starter motor protection (SMP), overrun and parking brake, reversing automatic, spur gear, support leg (unbraked version), truck DIN tow hitch (400mm), lighting according to StVZO, operating permit. Accessories: Compressed air hammer Atlas Copco, type TEX 10 PSKL, weight: 10.7 kg Compressed air hammer TEX 230 PE, weight: 27 kg Various pointed and wide chisels, asphalt chisel 115 mm wide TERRA hammer TU055R, TERRA compressed air hose, length approx. 15,000 mm, TERRA oiler. Original price: complete with accessories, €28,000 net. * New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates; furthermore, we can arrange for the transport of your purchased vehicles within Germany. Contact us! Iodpfoyai Euox Ah Ueig ---- We speak the following languages: German, English and Russian!---- No liability for printing and typographical errors, changes, prior sale and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the preparation and distribution of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the distribution of new and used commercial vehicles. A wide variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. Since customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Come and see for yourself! Our services for you: Loading of vehicles We will gladly assist you in loading your purchased vehicles. Organization of special transport We will gladly assist you in organizing special transport. Day registrations / export license plates We will gladly assist you in obtaining export license plates/short-term registrations. Processing of customs formalities

Condition: excellent (used), Year of construction: 2015, ATLAS COPCO XAS137 portable compressor, equipped with an aftercooler, fully serviced. Iedpfxezky Nke Ah Usig Technical data: flow rate: 7.70 m3/min; working pressure: 7 bar; year of manufacture: 2015 engine: KUBOTA operating hours: 2000 h compressor in perfect working order, ready for operation, with warranty. net price: 59,500 PLN gross price: 73,185 PLN machine imported in excellent condition. Links to videos are provided below.

Condition: like new (used), Year of construction: 2017, operating hours: 56 h, functionality: fully functional, total length: 1,976 mm, total width: 974 mm, total height: 1,500 mm, pressure (max.): 13 bar, noise level: 70 dB, nominal flow rate: 240 m³/h, The machine is in like-new condition with only 54 operating hours! Submitting a bid obligates the buyer to collect the machine on the following dates: Monday, October 5, 2026, Tuesday, October 6, 2026, Wednesday, October 7, 2026, Thursday, October 8, 2026, until 12:00 PM. The machine is already in storage. The technical data specified in the advertisement comes from a manufacturer's data sheet. The seller does not guarantee the accuracy of the data. TECHNICAL DETAILS Operating pressure max.: 13 bar Pressure setting range: 4–13 bar Volume flow: 22–66 l/s Volume flow: 1.3–4.0 m³/min Isdpfx Ahszzmw No Usig Volume flow: 47–140 cfm Sound pressure level: 70 dB(A) MACHINE DETAILS Motor power: 22 kW Dimensions (L x W x H): 1,976 x 974 x 1,500 mm EQUIPMENT Elektronikon Graphic control system Oil-free, water-injected screw compressor ISO 8573-1 Class 0 VSD speed control Further technical data can be found in the attached data sheet.

Condition: excellent (used), Year of construction: 2012, ATLAS COPCO XAS87 COMPRESSOR, 5.00 m3, 12 bar!! Ijdpotyk Taefx Ah Uoig DIESEL ATLAS COPCO XAS87 compressor, serviced. Technical data: Capacity: 5.00 m3/min; Operating pressure: 7 bar; Year of manufacture: 2012; Engine: KUBOTA Operating hours: 1397 h!!! The compressor is in full working order, ready for operation, and comes with a warranty. Net price: 32,500 PLN Gross price: 39,975 PLN Below is a link to a video showing the machine in operation.

Year of construction: 2004, condition: good (used), Atlas Copco XAS 67 air compressor Iijdpfxjiywpzj Ah Ueg 3.7 m3/min Operating hours: 2,371 hours Deutz engine Type: diesel

Condition: used, Year of construction: 2018, operating hours: 3,450 h, functionality: fully functional, overall weight: 23,000 kg, For sale: Plug & Play nitrogen generation system Nitrogen generator Manufacturer: AtlasCopco / AirCo Type: PSAL58SN Year of manufacture: 2018 Iijdexvtl Nepfx Ah Usg Serial number: 2018-21968 Weight: approx. 24 tons (estimated) Temperature min./max.: +3°C / +45°C Maximum pressure: 300 bar Operating voltage: 400 volts Installed in a 40" container, insulated with intake/exhaust air vents, Winter/summer mode Activated carbon filter type AK300 Pre-/post-filter type AF267UHU Nordpol cut system type 100PlusPan 2 x high-pressure compressors, each with a capacity of 15 kW 2 x nitrogen tanks, capacity 500L / 1,000 liters each Absorption dryer type A-DRY-105 2 x filter type AF85H 6 x nitrogen bundles, 300 bar 56 cubic meters per hour continuous production capacity Purity: 99.9% (depending on production capacity) Power consumption: 125 amps Transportation can be arranged upon request. If you are interested or have any questions, please send me a message. More photos and technical details available upon request. All information is provided without guarantee. Errors and prior sale are reserved. Price: Net export price. For further questions, please call. Nous parlons Français / Мы говорим по-русски We speak English / Noi vorbim românește Viber / WhatsApp / Skype For an additional charge, we will handle all customs and registration matters. For an additional charge, we will transport the vehicles to the port.

Condition: repair required (used), Year of construction: 2007, functionality: not functional, power: 250 kW (339.91 HP), volume flow: 2,256 m³/h, pressure (max.): 9.75 bar, type of cooling: air, Equipment: refrigerant dryer, type plate available, Screw compressor Atlas Copco GA250FF Ijdpfx Ahozhu Nas Usig Dryer integrated 250 kW 9.75 bar 37.80 m3/min Year of manufacture: 2007 Main motor defective Price: 9,000 EUR

Condition: good (used), overall weight: 5,100 kg, fuel type: diesel, fuel: diesel, Year of construction: 2005, PROD - ATLASCOPCO TYPE - XAS426 S/N - YA3-062854-50542371 YEAR - 2005 Iiodet Srw Aopfx Ah Ujg POWER (kW) - 166 PUMP. (m3/min) - 25 CIS (bar) - 7

Condition: excellent (used), Year of construction: 2016, Atlas Copco SF8 + FF Oil Free Air Compressor Iiedov D Hayepfx Ah Uog This is a Used Atlas Copco SF8+FF Oil Free Scroll Air Compressor manufactured in 2016. SF+ 8 multi-scroll units bring in the benefits and flexibility of a modular system utilizing two to four compressor modules integrated into one canopy. The Elektronikon® continuously monitors the status of each element and starts and stops the compression elements, thereby ensuring that the compressed air output matches the air demand. Moreover, the perfect air quality and user-friendliness of these units guarantee a superior production process. Manufacturer: Atlas Copco Model: SF8 + FF HC Year: 2016 Capacity: 0,68m3/h Installed Power: 7,4 kW Noise Level: 63 dB Max. working pressure: 9,75 bar Machine Dimensions LxWxH: 1.700x760x1.850 mm Machine Weight: 457 kg.

Condition: excellent (used), Year of construction: 1997, fuel type: diesel, For sale, two Atlas Copco QAS 18 diesel generators. Both generators have a compact design and are suitable for professional use on construction sites, in workshops, and at other locations where a mobile power supply is required. Atlas Copco QAS 18 Diesel generator. 400 V connection. Iiodpfx Aoz Dkqpsh Usg 230 V connection. Multiple power connections. Emergency stop. Analog meters for voltage, amperage, and frequency. Integrated fuel tank. Enclosed housing. Both generators are used and show signs of wear consistent with their age. They can be sold separately or together. Price per unit, €3,750 net. Price for both together, €7,500 net. Videos available upon request. Viewing and testing are possible at our location in Deventer. Haverhoek Trucks B.V. Zweedsestraat 6. 7418 BG Deventer. The Netherlands. = Additional information = Year of manufacture: June 1997 Model year: 1997 Intended use: Construction Mains voltage: 400 V Generator power: 10 kVA CE marking: yes Technical condition: very good Optical condition: good

Condition: reconditioned (used), Screw compressor stages for Atlas Copco, Kaeser – AIREND SIGMA – 1,2,3,4 SIGMA – 12 SIGMA – 175, 170, 18, 19, 26, 27, 28, 290, 292, 293, 33, 37 Iiodpfxjxy Aaqo Ah Uog OIS-H03 OIS-H06 OIS-J01 OIS-K03 OIS-K13 OIS-K14 OIS-K15 OIS-K25 OIS-K26 OIS-K36 OIS-L03 OIS-L06 OIS-M01 OIS-M05 – C146 OIS-M08 OIS-N01 OIS-N02 OIS-O01 OIS-O05 OIS-Q01 C146 C190 C111

Condition: used, Year of construction: 2008, operating hours: 85,394 h, functionality: fully functional, machine/vehicle number: APF 136194, overall weight: 2,550 kg, total length: 2,900 mm, total width: 1,450 mm, total height: 2,200 mm, space requirement length: 3,000 mm, space requirement width: 1,600 mm, motor manufacturer: ABB, fuel type: electric, ATLAS COPCO ZT 55 VSD Screw Compressor with Inverter, 18.5 kW, 3.35 m3/min, 13 bar Our company offers a professional level of service and high-quality products, all of which have been “tested” in the market, guaranteeing a successful partnership with you. We offer a warranty on used compressors and dryers! Our strength is our 24/7 compressor service. Iodpfxsy Amh Ho Ah Usig ATLAS COPCO GA18VSD Screw Compressor with Inverter, 18.5 kW, 3.35 m3/min, 13 bar Technically sound and ready for operation. I also have a dryer with a filter set. A preferential price is offered for the combined purchase.