Double mitre crosscut saw

OMGA TRF 527

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Njdpfoxnlgcsx Af Sedf Storage location: Garbsen

Year of construction: 1979, condition: excellent (used), Vertongen Tenoning Machine P04 year 1979 S/N 5811 in great condition from a vocational school in Finland Included with tools Automatically adjustable tenoning machine Saw unit, max cutting height 130mm, spindle 30 mm /3000rpm, 400mm diameter saw blade 2 horizontal cutter blocks diam 160mm, spindle diameter 40 mm /4500rpm 2 vertical spindles 40 mm working height 160mm, 4000rpm ( Top + bottom ) 1 vertical spindle 40mm, working height 160mm / 4000rpm all spindles are adjustable in the horizontal and vertical direction Tenoning carrige 1000x280mm Sliding guide 2400mm with manual pressure and fence Power 380V 3-phase 50Hz Extraction needs (dust collector) 2400 m3/h Weight approx.1100 kg Njdpjh D Sb Refx Af Ssdf technical information under subject for corrections

Condition: used, Year of construction: 2002, DOUBLE MITRE SAW (GLASS BEAD SAW) OMGA TRF 527 NC incl. star stop Ndodpfx Afjxwumqj Sjf Year of manufacture: 2002 Min. & max. distance between units: 158 mm, 2800 mm Cutting capacity at 90 degrees: 55 mm Cutting capacity at 45 degrees: 40 mm Max. cutting height: 40 mm Motor power: 2 x 1.18 kW Saw blade bore: 30 mm Saw blade diameter: 220 mm Spindle speed: 5000 rpm

Condition: used, Year of construction: 2017, Number of motors 2x 1.2 kW Stück 0 2800 mm Control ja 0 OMGA Double Glazing Bead Saw Model TRF 527 NC CE ----- Sold on behalf of the customer from the customer's location. The machine was in use until closing and is now at the customer's warehouse. Technical manufacturer's description: Double miter saw for cutting two glazing beads simultaneously. The right saw unit is fixed; the left unit is adjusted via the positioning control. Features of the positioning control: - Monochromatic graphic display 240 x 64 pixels - Display of 30 characters on 8 lines - Keypad with 28 function keys - FN key for interrupting the function - Diagnostics and error messages - Language selection: Italian, German, British, Spanish, French, and Swiss - 10,000 memory lines divisible into 999 cycles, max. 99 lines per cycle - RS-232 interface - Dimensions can be entered manually or via USB interface - 3 correction values ??each for the left and right saw units - 1 correction value for counter profiles The adjustable unit is equipped with recirculating ball bushings and runs on steel-hardened axes. Both units have supports that allow the simultaneous cutting of two glazing beads. For cutting larger cross-sections, the upper support can be removed. After the cutting process is complete, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. Machine features: - Fixed right-hand saw unit - Pivoting clamping device - Positioning control for TRF 527 NC CE - Maintenance unit - Center support - 220 mm Ø carbide-tipped saw blades - Two-hand control - Intermediate support for simultaneous sawing of two glazing beads - Pneumatic saw unit lift - Motor protection switch - Pressure switch - Undervoltage release - Overload switch - Tool set - 2 x 4-position angle star saw holders Technical specifications: - Motor power: 2 x 1.2 kW - Saw blade diameter: 220 mm - Max. cutting height without support: 80 mm - Max. cutting width at 90 degrees: 55 mm - Max. cutting width at 45 degrees: 40 mm - Max. cutting length: 2800 mm - Min. cutting length: 158 mm - Weight 217 kg ----- Price of the above-mentioned machine upon request! ----- (Technical specifications according to the manufacturer - no guarantee!) Ndodpoxmamnsfx Af Sjf All prices quoted are net, plus VAT.

Condition: new, A twin blade saw that has been specifically designed for cutting glazing beads accurately to length, with either a straight or mitred cut. The machine has two work-levels one set above the other, allowing two lengths of beading to be cut simultaneously. The two lengths of bead are held secure during the cutting operation by the front pneumatic clamps. Setting the correct length is achieved by means of handwheel moving the left head in relationship to the fixed right head, the length is easily read from the mechanical digital display. Min/Max. cutting length 150mm - 2400mm Max. cutting section at 90° 55 x 100mm Max. cutting section at 45° 40 x 100mm Ndedpjdy Hqvofx Af Sef 2 x sawblades dia. 220mm x 30mm bore Motor 1.6hp, 3 phase CE Safety requirements