Used Crimping and flanging machines for sale (65)

Condition: new, Fastech Motorized Beading Machine FKS-M 250 4 tool sets included Technical specifications Tool diameter Ø95 Shaft length: 260mm Bending capacity: 2,5mm Rotation: 11 m/ min. motor: 1,1 kW dimension L-W-H: 1550x550x1240 weight: 295 kg Values are valid for St-37 / 240 N/mm² Cgjb Eehzq A Nouhuvet CE mark

Condition: good (used), Beading machine, flanging machine, lockformer, rollformer -Manufacturer: Lockformer, Rollformer Type 16 GA. -Capacity: 16-24 Ga. -Flange height: 3/8 inch outer flange height -Engine: Wölfer 0.55 kW Cgeb Eevqa R Ssuhuvst -Dimensions: 610/610/H970 mm -Weight: 88 kg

Condition: ready for operation (used), Year of construction: 2006, Prinzing beading machine Type SME 200/11 year of construction 2006 throat 1100 mm connected load 5,5KW Cgobjh Hgdrj Euhuvet max. sheet thickness 1.5 mm VA Siemens Siematic OP7 control Special equipment: -parallel top roller feed with bearing-mounted work rollers -stepless drive motor -motorised top roller feed, infinitely adjustable sensor-controlled feed for automatic operation Table-top version of sheet guide device Total weight 6700 kg The offer is only addressed to dealers in accordance with § 14 of the BGB (German Civil Code). No Sales to private persons

Condition: new, Year of construction: 2025, throat depth: 250 mm, - Capacity 1.2 mm - Ejection 250 mm - With 8 roller sets Ceber Hr Dwj Euhuvjgt

Condition: good (used), Year of construction: 2000, machine/vehicle number: 00-417-011, Offer 24513 Technical data: Cgobovazp Ij Euhuvst - max. material thickness at 40 kg/mm² strength 3 mm - Max. projection 500 mm - Working depth 430 mm - hydr. infeed of the top roller - Roller center distance 125 mm - Working speeds infinitely variable 3 to 15 m/min - Right + left rotation - Drive 400 V 1.5 / 2.5 kW - Space requirement approx. W 630 x H 1450 x D 1200 mm - Weight approx. 550 kg - with: - E - foot switch for top roller feed - E - foot switch for right - left rotation - Various roller sets - Stop apron

Year of construction: 2018, Condition: used, plate thickness 1,2 mm roll diameter 62 mm throat 100 mm weight of the machine ca. 50 kg Cgsb Euhjraqhxjuvst dimensions of the machine ca. 560 x 220 x 500 mm

Condition: new, Ostas beading machine KMRP 2.5 Technical specifications: - Wavelength: 250mm - bending capacity: 2,5mm - revolution: 17 m/ min. - motor: 1,5kW - Dimensions L-W-H: 550x1400x1120mm - Weight: 350kg Accessories included Cgjb Eujfig Adehuvst

Condition: used, Beading machine, flanging machine, seam closing machine, motorized beading machine -Max. Sheet metal capacity: 1.25 mm -electrically driven: 1.1 kW -Projection: 50 mm Cob Esb A Ncrjuhuvsgt -Dimensions: 900/800 / H1100 mm -Weight: 250 kg

Condition: used, Year of construction: 2022, plate thickness 4.0 mm throat 260 mm Cob Euhuju Elncjvjgt distance between roll centers 132 mm stroke 55.0 OW mm tool adaptor Ø 35 mm, 12 mm Nut mm total power requirement 3.0 kW weight of the machine ca. 450 kg. range L-W-H 1600 x 900 x 1200 mm Exhibition machine from 2022 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - 3x pairs of beading and flanging rollers included in delivery - robust beading machine with motor-driven rollers - hydraulic adjustment of the upper roller, with pressure gauge - Lower shaft with adjustable stop - for the economical production of a wide variety of bead types - high accuracy thanks to precision-mounted shafts - Clearly arranged switching elements - Base frame equipped with storage compartment - powerful drive motor, even under continuous load - mobile foot switch for clockwise and counterclockwise rotation

Year of construction: 2021, Condition: new, OSTAS PRE-MACHINERY TYPE KMRP 2,5 - Capacity 2,5 mm - With 4 sets of rollers - Foot-operated Csb Euhogv Tkceuvegt - Brake motor - Emergency stop - 400V CALL FOR MORE INFO DUTCHMACH Metalworking machines ENSCHEDE

Year of construction: 1992, Condition: good (used), machine/vehicle number: 10-166, OFFER 13467 Cgeb Euhuohrm Iujvst Technical data: - max. material thickness at 40 kg/mm² strength approx. 3 mm - shaft reception 45 mm - manual hydraulic feed of the top roller - E. foot switch - drive 400 V / 1,1 kW - space requirement approx. W 550 x H 1200 x D 1200 mm - weight approx. 180 kg

Condition: new, Year of construction: 2025, The bending machine has replaceable segments. The simple design of the bending machine ensures great comfort of use. Machine characteristics Rigid and durable steel construction. Long working levers enabling high force transfer. Upper and lower edge made of extra-fine steel. Segments various widths. Segments enabling boxes bending. Technical data WORKING WIDTH 1220 mm MAXIMAL SHEET METAL THICKNESS 2,5 mm BENDING ANGLE 0° - 135° Cgeb Euhjmtwt Uouvet DIMENSIONS 1750 mm x 770 mm x 900 mm WEIGHT 580 kg The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, machine/vehicle number: 72887, plate thickness:40 mm throat:400 mm distance between roll centers:125 Max. thickness of the material:25 mm Coborqit Ie Euhuvegt turning speed:17-85 m/min. weight of the machine ca.:1050 kg dimensions of the machine ca.:800 x 1300 x 1700 mm

Condition: used, Year of construction: 1995, Max. sheet thickness: 2 mm steel Roller center distance: 100 mm Largest projection: 400 mm Right and left rotation via foot switch Cgjb Eerrzi Sjuhuvst Motor with infinitely variable speed adjustment Machine in original paint Accessories upon request

Condition: new, plate thickness 1.20 mm throat 270 (140) mm distance between roll centers 60.0 mm total power requirement manuell kW weight of the machine ca. 46.0 kg dimensions of the machine ca. 600 x 250 x 500 mm Furnishing: - various replacement rollers - hand crank Cjb Eueixm Rkohuvegt - front stop

Condition: new, OSTAS PRE-MACHINERY TYPE KMRH 2,5 - Capacity 2,5 mm - Hydraulic roller adjustment - Foot-operated - Brake motor - With 4 sets of rollers - Emergency stop - 400V CALL FOR MORE INFO DUTCHMACH Ceb Euhuogmr Ndsvogt Metalworking machines ENSCHEDE

Condition: good (used), Year of construction: 1994, machine/vehicle number: 94-417-008, Offer 24356 Technical data: - max. material thickness at 40 kg/mm² strength 3 mm - Max. projection 500 mm - Working depth 430 mm - hydr. infeed of the top roller - Roller center distance 125 mm - Working speeds infinitely variable 3 to 15 m/min - Right + left rotation - Drive 400 V 1.5 / 2.5 kW - Space requirement approx. W 630 x H 1450 x D 1200 mm - Weight approx. 550 kg - with: - E - foot switch for top roller feed Cgebjt Sucnj Euhuvst - E - foot switch for right - left rotation - Various roller sets - Stop apron

Condition: new, Year of construction: 2025, Folding machine with exchangeable segments. Its simple construction ensures comfortable handling. Machine characteristics The folding machine has exchangeable segments on the upper and lower part. It gives extremely broad use for big elements as well as details folding. The segments are made of pressure iron castings, resistant to deformations and of exceptionally high strength. A simple construction secures high operation comfort and a broad range of practical use. The smallest segment possible to clamp is of 25 mm size and the biggest is of 270 mm size with a possibility of place change enable folding of any shape in the quality to be achieved. The sheet metal maximum thickness is 2 mm and the possibility of opening adjustment up to 48 mm make that there is practically no limits for this model. Segment dimensions 25 mm 30 mm 35 mm 40 mm 45 mm 50 mm 75 mm 100 mm 150 mm 200 mm 250 mm 270 mm Technical data WORKING WIDTH 1270 mm MAXIMAL SHEET METAL THICKNESS 2,0 mm MAXIMAL OPENING LENGTH 48 mm Ceb Ejmtwtmsuhuvegt BENDING ANGLE 0° - 135° NUMBER OF SEGMENTS 12 pieces DIMENSIONS 1710 mm x 750 mm x 1420 mm WEIGHT 422 kg The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2022, Powerful automatic expansion machine "Stretcher" is used for widening of thin-wall metal pipes with a thickness from 0.4 mm to 2.0 mm, for further pipe-in-pipe joint. This compact machine with high efficiency is an ideal solution for serial production of stainless steel chimneys. Widen machine "Stretcher" allows to produce a large range of products: chimney pipes, drain pipes, exhaust systems, ventilation pipes, etc. Expanding tools made of hard plastic to prevent future corrosion. ADVANTAGE OF THE MACHINE High performance (cycle time 3 seconds) Easy quick-release tools with height from 10 to 100 mm Wide range of options (PLC control, color touch screen, step program, turn table, rotating expansion head etc.) Expansion tools is made individually on the customer's drawings An ideal solution for the serial production of stainless, mild, galvanized steel chimneys Csb Eustptulehuvogt

Condition: used, Max. Sheet thickness: 1.25 mm steel Roller center distance: 63 mm Cgeb Euohlnv Hshuvjt

Condition: new, plate thickness 1,25 mm throat 130 mm roll diameter mm total power requirement 0,75 kW weight of the machine ca. 180 kg dimensions of the machine ca. 1,1 x 0,6 x 1,2 m Flanging machine is equipped with: - Emergency switch - Footswitch Ceb Ejvn U Dnouhuvsgt - 8 pcs. Roll sets

Condition: new, OSTAS PRE-MACHINERY TYPE KMRH 2,5 - Capacity 2,5 mm - Hydraulic roller adjustment - Foot-operated - Brake motor - With 4 sets of rollers - Emergency stop - 400V Cob Euhogg N A Usuvjgt CALL FOR MORE INFO DUTCHMACH Metalworking machines ENSCHEDE

Condition: good (used), Year of construction: 1992, machine/vehicle number: 9207102, Offer 12001 Technical data: - material thickness 1,25 mm - max. throat 180 mm Cgob Eji Hpmtouhuvst - roller center distance 63 mm - max. material thickness at 40 kg/mm² strength 1,25 mm - working speed approx. 6 + 12 m/min - drive 400 V / 0,7 / 0,85 kW - space requirement approx. W 550 x H 1250 x D 1000 mm - weight approx. 120 kg - with: - E - foot switch

Condition: new, Sheet thickness max.*: 2.5 mm Working speed: 5 1/min shaft length: 250 mm shaft diameter: 65 mm motor power: 1,5 kW Connection: 400 V Weight, approx.: 400 kg * Material strength 400 N/mm2 without stop Features: - Extended application range due to 8 different pairs of rollers available as an option - Upper shaft with quick adjustment and stable clamping Ceb Euepxl U Tehuvegt - Axially movable stop plate for high repeat accuracy - Operation via foot pedal, thus both hands free to hold the workpiece - Powerful drive motor for processing sheets up to 2.5 mm steel plate - High accuracy due to precision bearing mounted shafts - For economical production of a wide range of beading types Scope of delivery: - Beading rollers -Mobile foot pedal control panel - workpiece stop - roller wrench

Condition: good (used), Year of construction: 2008, machine/vehicle number: 1441, Offer 24569 Technical data: - max. material thickness at 40 kg/mm² strength 4 mm - max. projection 260 mm Csbsvpgprs Euhuvsgt - working depth approx. 250 mm - roller center distance 50 mm - roller holder 50 mm - shaft thickness 85 mm - working speed 8 m/min - right + left rotation - hydraulic feed of the top roller - drive 400 V / 2.2 kW - space requirement approx. W 700 x H 1450 x D 1650 mm weight approx. 700 kg - with: - separate control panel with E-foot switch - roller sets