Filter system Extraction system

Zender Filterfläche

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Features and technical specifications: - Round pot glue application unit - With second glue application unit for PUR processing - Feed unit with automatic edge band magazine - Pressure zone with multiple pressure rollers - End trimming: 2 motorized saw units for front/end cap cutting - Top/bottom milling units: 2 milling units with tracing wheels for radius or chamfering - Radius scraper blade: pneumatically operated, post-processing of radii Hedpfxeyqanbj Aczsp - Surface scraper blade: for smoothing the edge surfaces - Polishing unit: 2 polishing wheels with motors for final finishing - Riepe spray device - Control: PLC with control panel - Feed frequency inverter replaced by Ott in 2022 - Feed speed approx. 10–12 m/min - Workpiece thickness up to 52 mm - Edge thickness 0.3 – 12 mm - Power supply 3x 400 V AC, 50 Hz - Rated power 12.7 kW - Rated current 30.5 A - Control voltage 24 V DC - Max. fuse protection 35 A (5x 6 mm² connection cable) Machine dimensions: approx. 6120 x 840 x 1385 mm Machine weight: approx. 3,000 kg Availability: short notice Location: Röllbach

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Edgebander BIESSE Akron 1440A Availability: April/May 2026 CE certificate Hsdpfoyh A I Asx Aczop Year of manufacture: 2017 Possibility to inspect the machine before purchase

Condition: used, Year of construction: 2009, Used machine Year of manufacture: 2009 Single-sided automatic edge banding machine with CNC control, 10" touch screen Industrial conveyor chain 1 1/4" Joint milling unit FI-502 Glue application unit VC-710 End trimming unit IN-801 Top and bottom flush trimming unit RS-100 2 motorized multifunction profiling units - contour milling unit CR-202 (FAST system with 4 standard positions) Scraper unit RBK-503, NC 2 positions Flat scraper RCC-701 Workpiece thickness: 10-65 mm Max. workpiece height with contour milling unit (depending on profiles): 35-65 mm Edge thickness from roll: 0.4-3 mm Hjdpfev R Nk Usx Aczep Edge thickness from strip material: 0.4-22 mm (depending on unit) Minimum workpiece length: 140 mm Minimum workpiece width (with length 140 mm): 85 mm Minimum workpiece width (with length 250 mm): 50 mm Feed speeds: 10-14-18-20 Central extraction connection: 200 mm Extraction connection, edge banding: 80 mm Extraction connection, joint milling: 120 mm Glue pot capacity: approx. 3 kg Heat-up time at half fill: approx. 10 min Length: 6000 mm Width: 1780 mm Height: 1770 mm Machine is offered without the workpiece return unit shown in the pictures Availability: short-term Location: Flörsheim

Condition: ready for operation (used), Year of construction: 2000, cutting length (max.): 3,300 mm, This HOLZMA HPL 23/X/33/22/30/L was manufactured in 2000. A robust used panel saw featuring a cutting length of 3300 mm, 3 air cushion tables, and a lifting table measuring 3300 x 2200 mm. It includes a main saw with 18 kW power and a scoring saw of 2.2 kW, controlled by a CADMATIC system. Contact us for more information about this machine. • Cutting length: 3300 mm • Saw blade overhang: 125 mm • Main saw motor: 18 kW Hsdsx D Hlfspfx Aczjp • Scoring saw motor: 2.2 kW • Control: CADMATIC Additional equipment • 3 air-cushion tables • Lifting table, 3300 x 2200 mm

Condition: excellent (used), Year of construction: 2008, Machine Data: Holzma HPP 380/43/43 Cutting length: 4300 mm Cutting width (program pusher travel): 4250 mm Roller rails (2-track element): 9 pcs Clamps: 7 pcs, first 3 clamps: 2-finger type Air cushion table width: 650 mm / 1 x 800 mm (4 pcs), each 2810 mm length Central blower: 1 unit, high output version POWER-CONCEPT TYPE PROFILINE HPP/L 380 – 1 ‘Power-Concept’ clamp (3-finger type) – 3 skew-lift clamps (2-finger type) – 1 skew-lift clamp (1-finger type) – 1st air cushion table, 800 mm wide – Speed package: saw carriage feed rate 1 – 150 m/min Technical Data: Saw blade protrusion: 95 mm Saw carriage feed rate: forward 1-130 m/min, reverse fixed at 130 m/min Automatic cutting height adjustment Hodpozcpi Sjfx Aczop Angle alignment device, min. pressure width: 0 mm, max. pressure width: full cutting length Main saw motor: 21 kW, frequency-controlled Scoring saw motor, type VVSH vertical upstroke: 2.2 kW Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connection rating with main saw motor 18 kW: 28 kW Power Control CADmatic 4.0 control with 17" flat display Labelling with part graphics / label program / label printer PICA 104 Grooving program

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, OTT Tornado FÜ + PU SPS-compatible control with 7" TFT color touchscreen display CM-CombiMelt unit for EVA and PUR hot-melt adhesives Pre-milling unit – jointing Fully automatic roll magazine Fully automatic edge magazine Pneumatic flush trimming 0-3° Flush trimming – 12 mm Radius milling R-2, R-5 Bevel milling 0°/15°/30°/45° Corner rounding Radius scraper blade Surface scraper blade Soundproof enclosure with space extraction Cleaning set with 4-way spray system, fine buffing unit, and sliding agent spray equipment First delivery in 2006 Machine has been WORKSHOP TESTED and is in TOP CONDITION The gluing unit was recently fully serviced and wearing parts replaced Technical data: Edge thickness: 0.4 – 8 mm Panel thickness: 8 – 40 mm Minimum panel length: 150 mm Minimum panel width: 70 mm Feed speed: 14 m/min Pre-milling unit: with 2 HF motors, 2.3 kW, 12,000 rpm End trimming unit: with 2 HF motors, 0.3 kW, 12,000 rpm Flush trimming unit: with 2 HF motors, 0.7 kW, 12,000 rpm Fine trimming unit: with 2 HF motors, 0.3 kW, 12,000 rpm Corner copying unit Scraper blade Buffing unit 3-way spraying system Total connected load: 17.5 kW Dimensions: Length: 6,180 mm Width: 1,770 mm Weight: 3,100 kg - Available immediately - Hodpfx Acjv Sm Hcezsp

Condition: used, Year of construction: 2001, machine/vehicle number: AE/22614, functionality: fully functional, cutting width (max.): 4,500 mm, total length: 5,000 mm, total width: 7,000 mm, total height: 2,350 mm, cutting length (max.): 3,200 mm, SECOND-HAND PANEL SAW SCM MOD. SIGMA 65 - CE RULES - Cutting dimensions: 4500X3200 mm - Main blade projection: 65mm - N. 6 clamps - Saw carriage speed: 12m/min - Main blade diameter: 300mm - shaft diameter 80mm Hsdpox Rvazefx Aczsp - Scorer blade diameter: 160mm - shaft diameter 55mm - Main blade motor: 5,5kW - Overall dimensions: 7000x5000x4350 - S/N AE/22614 - Year 2001

Condition: ready for operation (used), Year of construction: 2018, cutting length (max.): 4,300 mm, Panel saw manufactured in 2018. This HOMAG PROFI HPP 300 / 43 / 43 features a cutting length of 4,300 mm and a cutting width of approximately 4,250 mm. It has a maximum saw carriage feed speed of 130 m/min and a maximum saw blade diameter of 350 mm. If you are looking to get high-quality panel cutting capabilities, consider the HOMAG PROFI HPP 300 / 43 / 43 machine we have for sale. Contact us for further details. • Cutting width (programmable pusher): approx. 4,250 mm • Max. saw carriage feed speed: 130 m/min (optional up to 150 m/min) • Saw blade projection: 80 mm (optional 95 mm) • Max. saw blade diameter: 350 mm • Main saw blade diameter: 350–380 mm (depending on configuration) • Main saw motor: 11 kW • Scoring saw motor: adjustable, 1.5–2.2 kW • Clamps: 7 units (2-finger design) • Control system: CADMATIC 4.1 / 4.5 or powerTouch (depending on configuration) • Total connected load: approx. 18.4 kW • Compressed air: 6 bar • CE marking: Yes • Stack height: up to approx. 80 mm (standard) • Extraction capacity requirement: approx. 3,350–5,230 m³/h • Processing: Single panels and stack cuts Hedpfozdignex Aczsp

Condition: ready for operation (used), Year of construction: 2005, Edgebander manufactured in 2005. This OTT Twister features a hot-cold melt adhesive application process and can handle edge thicknesses from 0.3 to 10 mm. It supports workpiece thicknesses of 8 to 60 mm and has a feed speed of 14-20 m/min. If you are looking to get high-quality edge banding capabilities, consider the OTT Twister edgebander we have for sale. Contact us for further details. • Adhesive application: Hot/cold melt adhesive process; application roller with synchronous and counter-rotation • Edge thickness: 0.3–10 mm • Workpiece thickness: 8–60 mm • Workpiece width: minimum 70 mm • Workpiece length: minimum 150 mm • Operating pressure: 6 bar Hsdpfsyn I U Rox Aczop • Feed power: 3.0 kW • Feed speed: 14–20 m/min • Electrical connection: 3x 400 V, 50 Hz • Extraction requirement: 1x Ø180 mm at 20 m/s = 35 m³/min • Air speed (minimum): 20 m/s • Compressed air consumption: approx. 300 l/minProcessing units / equipment on the machine: • Joining: • 2 x 2.2 kW, n=14,600, 250 Hz; two application-controlled working spindles • Combi-melt gluing unit: • Top-mounted, changeable hopper for EVA, PUR hot melt adhesive or cleaning granulates; hopper volume 2.5 l • AKM (automatic edge magazine): • Automatic edge magazine with optical monitoring for strip edges in fixed lengths • Capping: • 2 x 0.8 kW, n=12,000, 200 Hz; automatic swivel 0°/5°; 2 HM saw blades Ø140 x 3.2 x 16, z=34 • Flush milling: • 2 x 0.7 kW, n=12,000, 200 Hz; single-sided probing; 2 carbide-tipped indexable knife heads HF70, Ø70 x 20 x 16, z=4 • Fine milling (bevel 15°/30°/45°): • 2 x 0.3 kW, n=12,000, 200 Hz; double-sided probing; 2 carbide indexable insert cutter heads HF70, Ø70 x 20 x 16, z=4 • AWSR (radius R2–R5): • 2 quick-change sets for fine milling cutter, 2 x 0.3 kW; 2 carbide indexable insert cutter heads AR73 x 16 x 16, z=3, R2–R5 • AKF (copy milling): • Automated copy milling with two separate working spindles for end faces and longitudinal radii; 2 x 0.37 kW, 12,000 rpm; tools R1–R3 • Scraper blade: • 2 x carbide scrapers, automatic feed • Surface scraper: • 2 x carbide scrapers, with fine adjustment device • PU set: • 5-way spray device (2 x release agent, 1 x lubricant, 2 x cleaning agent), fine buffing device with cloth disc • Edge cleaning: • 2 x 0.2 kW, n=2,800, 50 Hz, oscillating brushes

Condition: used, machine/vehicle number: 008503, Max. panel width: 4300 mm Hodpfxey Hcd Es Aczep Max. panel length: 4300 mm Main saw blade projection: 80 mm No of Grippers: 8