Injection molding machine

Wittmann Battenfeld MacroPower 900/ 8800

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 172822052, SPECIFICATION Lhjdpfxet Dmlfs Aaxjb Trunnion table size 600mm diameter X axis traverse 600mm Y axis traverse 600mm Z axis traverse 500mm A axis tilt +120 deg/-120deg C axis rotation 360 degree Maximum table load 600Kg Spindle BT 40 Maximum spindle speed 15,000rpm Spindle motor 22.4kW Maximum spindle torque 239Nm at 1100rpm Spindle motor 35kW Rapid feed rate X,Y,Z axis 36m/min Rapid feed rate C axis 540 degrees a second (90 rpm Rapid feed rate A axis 99 degrees a second (16.6rpm) Toolchanger capacity 32 tools Approx. weight 9500kg   MACHINE EQUIPPED WITH:- Siemens 840DSL CNC control system with Shop Mill Through spindle coolant, 20 bar Swarf Conveyor Laser toolsetting Traori-this function keeps the tool in an optimised cutting position relative to the workpiece when 5 axis simultaneous machining Networking Lighting Enclosed Guarding

Condition: as good as new (ex-display), Year of construction: 2024, General Tool magazine : 2x chain magazine with 32 stations each Rapid traverse in X/Y/Z : 48 m/min Traverse path X/Y/Z : 800/900/620 mm Spindle Technology : Direct drive Speed : 15.000 rpm Ledpfeur Ng Ujx Aaxshb Tool holder : HSK-A63 NC rotary table Technology : Swivel rotary table with torque drive, made by Kessler A-axis : +/- 120 C-axis : 360° Clamping surface : ø800 mm Table load (max.) : 1,000 kg Workpiece dimensions (max.) : ø800 x 500 mm Equipment Distance measuring system : Direct (glass scales) in all axes Chip management : Chip conveyor Coolant management : IKZ system with filter and high pressure, 18 bar Workpiece measurement : Touch probe, Heidenhain TS 740 Tool measurement : Laser, BLUM Set-up mode : Electronic handwheel Additional equipment : Spindle cooler

Condition: good (used), Year of construction: 2014, Technical data shown on photos. Lhedpfx Aaoufp Svsxjb Parts shown by hand not come.

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, total height: 2,700 mm, total length: 2,800 mm, total width: 3,550 mm, table width: 600 mm, table length: 1,200 mm, table load: 800 kg, overall weight: 7,500 kg, spindle speed (max.): 8,000 rpm, spindle nose: SK40, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Vertical machining center with extensive standard equipment: - FANUC or Heidenhain control - internal coolant supply - SK 40 - 24-position tool magazine, double-arm gripper - Glass scales in all axes - Chip conveyor - Electronic handwheel - Compressed air through the spindle - 30-position tool holder package - Complete 24-position tool equipment - Initial filling of coolant lubricant - Installation-commissioning-training - Guarantee up to 5 years possible Lodpovtz Dxofx Aaxehb HAITIAN European branch Ebermannsdorf

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 1,750 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 800 mm, table length: 1,200 mm, table width: 1,000 mm, spindle speed (max.): 18,000 rpm, table load: 3,000 kg, CNC Heidenhain TNC 640 TRAVELS Longitudinal travel: 1,750 mm Lodpextqq Rjfx Aaxjhb Cross travel: 1,400 mm Vertical travel: 800 mm A-axis travel: ±185° Feed rate: 35,000 mm/min Acceleration: 6 m/sec² WORK AREA Table size: 1,000 x 1,200 mm Table load capacity: 3,000 kg Table rotation speed: 20 rpm Distance between table and spindle nose: 205–805 mm Maximum horizontal clearance: 1,430 mm Working surface height from the floor: 855 mm ELECTROSPINDLE Power up to: 22 kW Torque up to: 99 Nm Maximum spindle speed: 18,000 rpm Maximum power at: 2,150 rpm Tool holder: HSK A63 TOOL CHANGER Number of tools: 30 Max tool diameter with adjacent pockets occupied: 90 mm Max tool length: 300 mm Max tool weight: 10 kg Tool change time: 15 sec DIMENSIONS Maximum height: 4,200 mm Base module dimensions: 5,650 × 3,350 mm Occupied area: 22 m² Total weight: 20,000 kg Machine equipped with: • 5-axis universal milling head with Direct Drive and continuous movement of both bodies • 30-position tool changer • Left-side chip conveyor • Various tooling • No. 1 magnetic table • Instruction manuals and CE declaration Year of construction: 2015

Condition: used, Year of construction: 2008, Technical details: table diameter: 1000 mm table height: 75 mm max. table load: 250 kg weight of the machine approx.: 1128 kg dimensions: Aggregat: L: 1400 x B: 1000 x H: 160 mm 1-axis NC rotary table - horizontal Positioning and rotary machining mode; intermittent operation with 8 star-shaped T-slots according to DIN 650: a=18H7; h=31mm; b=31mm; c=13mm x length 380mm Finished surface Overall height 250mm Turning: Ljdpfju N D A Tox Aaxjhb Rotation 360°, by means of incremental encoder, speed 2160°/min. Angular acceleration 120°/sec.²; positioning time 0.867 sec., speed max. 6 rpm, machining 1 rpm. Load on indexing plate axial max. 100kN, radial max. 115kN; Torques tangential 14,000 Nm as well as worm gear 7,000 Nm and circular machining 2,700 Nm Measuring system Heidenhain - RON 886 C type connections (2x G 1/4" and 2x G 1/8") *

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 920 mm, table length: 3,000 mm, table width: 1,700 mm, spindle speed (max.): 6,000 rpm, HURCO WinMax Dual CNC TRAVELS Longitudinal travel: 3.200 mm Transverse travel: 2.100 mm Vertical travel: 920 mm WORK AREA Table dimensions: 3.000 x 1.700 mm Table load capacity with uniform distribution: 11.000 kg SPINDLE Maximum spindle power: 60 kW (1 min) Maximum spindle torque: 570 Nm at 1.000 rpm (1 min) Maximum spindle rotation speed: 6.000 rpm Tool holder: ISO 50 DIN 69871 Machine complete with: • 40-station tool magazine • Digital motors and drives (axes and spindle) • Thermal conditioning system for headstock temperature control • Coolant system with supply around the spindle Lhodextqtlopfx Aaxeb • Water wash gun and water gun Compressed air • Chip evacuation system consisting of a double auger and evacuator • Complete enclosure • Instruction manuals and CE declaration

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 10 m/min, feed rate X-axis: 24 m/min, feed rate Y-axis: 24 m/min, feed rate Z-axis: 15 m/min, controller manufacturer: Fanuc, controller model: 0i, workpiece weight (max.): 3,000 kg, table width: 850 mm, table length: 1,500 mm, table load: 3,000 kg, spindle speed (max.): 600 rpm, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Double-column machining center SK50 tool holder Ledpfjv I Ucdox Aaxjhb Torque 630 Nm He Ul Tjv I Ucdjh U Sek Table load 3000 kg 6000 rpm Internal coolant supply Distance between columns 1670 mm Spindle nose to table surface 150-850 mm 45 kW 3 or 4-year warranty

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 107.44.00.407, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece weight (max.): 500 kg, total height: 3,200 mm, total width: 3,200 mm, table width: 600 mm, table height: 2,400 mm, table length: 600 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 20,000 rpm, overall weight: 10,000 kg, spindle speed (max.): 20,000 rpm, spindle motor power: 15,000 W, number of spindles: 1, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The MIKRON UCP 800 Duro, manufactured in 2018, is a high-performance 5-axis machining center equipped with a Heidenhain iTNC 530 control system. The machine offers travel paths of 800 x 650 x 500 mm (X/Y/Z) and features a C-axis with an endless 360° swivel range. The installed spindle/adapter types are NCD 150 PL and NCD 200 PL with HSK-E63 interface. The illustrated table system is currently not mounted. The machine comes equipped with a chip conveyor, a coolant system with filter, as well as complete documentation. The machine is available free loaded on truck (FCA) and has seen very little use overall. The operating hours clearly indicate: Lhedpfxox D Ux Ts Aaxeb Control ON: 30,064 h Machine ON: 10,322 h Program Execution: 4,159 h Drives ON: 7,331 h Spindle ON: 4,231 h The machine is under power and can be demonstrated at any time.

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BT40 - Spindle power : 15 [kW] - Spindle speeds : 12000 [rpm] - Number of spindle hours : 0 [h] LINEAR AXES - Travels on X/Y/Z axes : 900/600/600 [mm] - Rapid traverses rates (X/Y/Z) : 48 [m/min] - Distance table / spindle nose (min./max.) : 100-700 [mm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 40 - Tool exchange time : 3.8 [sec] TABLE - Table dimensions : 1000 X 600 [mm] - Maximum weight upon table : 650 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 20 [kW] WEIGHT & DIMENSIONS Lodpfx Ajuhbu Usaxohb - Machine floor space : 3500 X 2400 [mm] - Machine height : 3000 [mm] - Machine weight : 7000 [kg] EQUIPMENT - CNC : Fanuc Oi MD - Interface : RS232 / USB - Interactive programming : Manual guide Oi,10,4 - Electronic handwheel - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 20 [bars] * with paper filtering unit - Coolant through spindle - Micro-lubrification coolant - Chips conveyor